Improving the proton conductivity of sulfonated poly (ether ether ketone) membranes by incorporating a crystalline nanoassembly of trimesic acid and melamine

A novel proton exchange membrane was synthesized by embedding a crystalline which was nano-assembled through trimesic acid and melamine (TMA·M) into the matrix of the sulfonated poly (ether ether ketone) (SPEEK) to enhance the proton conductivity of the SPEEK membrane. Fourier transform infrared indicated that hydrogen bonds existed between SPEEK and TMA·M. XRD and SEM indicated that TMA·M was uniformly distributed within the matrix of SPEEK, and no phase separation occurred. Thermogravimetric analysis showed that this membrane could be applied as high temperature proton exchange membrane until 250 °C. The dimensional stability and mechanical properties of the composite membranes showed that the performance of the composite membranes is superior to that of the pristine SPEEK. Since TMA·M had a highly ordered nanostructure, and contained lots of hydrogen bonds and water molecules, the proton conductivity of the SPEEK/TMA·M-20% reached 0.00513 S cm⁻¹ at 25 °C and relative humidity 100%, which was 3 times more than the pristine SPEEK membrane, and achieved 0.00994 S cm⁻¹ at 120 °C.     

Cross-linked membranes based on sulfonated poly (ether ether ketone) (SPEEK)/Nafion for direct methanol fuel cells (DMFCs)

A series of cross-linked membranes based on SPEEK/Nafion have been prepared to improve methanol resistance and dimension stability of SPEEK membrane for the usage in the direct methanol fuel cells (DMFCs). Sulfonated diamine monomer is synthesized and used as cross-linker to improve the dispersion of Nafion in the composite membranes and decrease the negative effect of cross-linking on proton conductivity of membranes. FT-IR analysis shows that the cross-linking reaction is performed successfully. The effects of different contents of Nafion on the properties of cross-linked membranes are investigated in detail. All the cross-linked membranes show lower methanol permeability and better dimensional stability compared with the pristine SPEEK membrane. SPEEK-N30 with the 30 wt % Nafion shows a methanol permeability of 0.73 × 10⁻⁶ cm² s⁻¹ and a water uptake of 24.4% at 25 °C, which are lower than those of the pristine membrane. Meanwhile, the proton conductivity of SPEEK-N30 still remains at 0.041 S cm⁻¹ at 25 °C, which is comparable to that of the pristine SPEEK membrane. All the results indicate that these cross-linked membranes based on SPEEK/Nafion show good prospect for the use as proton exchange membranes.     

4-Aminopyridine grafted sulfonated poly(arylene ether ketone sulfone) proton exchange membrane with high relative selectivity for fuel cells

A series of sulfonated poly(arylene ether ketone sulfone)s polymer having a degree of sulfonation of 80% and a carboxyl group in the side chain (C-SPAEKS) were prepared by polycondensation. The 4-aminopyridine grafted sulfonated poly(arylene ether ketone sulfone)s polymer membranes (SPPs) were prepared by amidation reaction with the carboxyl group to immobilize 4-aminopyridine on the side chain. The ¹H NMR results and Fourier transform infrared of SPP membranes demonstrated the successful grafting of the 4-aminopyridine. Proton conductivity, water absorption, swelling ratio, and thermal stability of different proportions of SPP membranes were investigated under the different conditions. With the increase of pyridine grafting content, the methanol permeability coefficient of the membrane decreased significantly from 8.17 × 10⁻⁷ cm²s⁻¹ to 8.92 × 10⁻⁸ cm²s⁻¹ at 25 °C. And, the proton conductivity and relative selectivity of the membrane were positively correlated with the grafted pyridine content. Among them, the SPP-4 membrane exhibited the highest proton conductivity of 0.088 Scm⁻¹ at 100 °C. The relative selectivity increased from 4.73 × 10⁴ S scm⁻³ to 9.84 × 10⁴ S scm⁻³.     

Novel sulfonated poly(ether ether ketone ketone)s for direct methanol fuel cells usage: Synthesis,water uptake,methanol diffusion coefficient and proton conductivity

A novel series of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) with different degrees of sulfonation (Ds) were synthesized from 1,3-bis(3-sodium sulfonate-4-fluorobenzoyl)benzene (1,3-SFBB-Na), 1,3-bis(4-fluorobenzoyl)benzene (1,3-FBB) and 3,3′,5,5′-tetramethyl-4,4′-biphenol (TMBP) by aromatic nucleophilic polycondensation. The chemical structures of SPEEKKs were confirmed by FT-IR spectroscopy and the Ds values of the polymers were calculated by ¹H NMR and titration methods, respectively. The thermal stabilities of the SPEEKKs in acid and sodium forms were characterized by thermogravimetric analysis (TGA), which showed that SPEEKKs had excellent thermal properties at high temperatures. All the SPEEKK polymers were easily solution cast into tough membranes. Water uptakes, proton conductivities and methanol diffusion coefficients of the SPEEKK membranes were measured. Water uptake increased with Ds and temperature. Compared to Nafion, the SPEEKK-60, -70 and -80 membranes showed higher proton conductivities at 80 °C, while the other SPEEKK membranes showed relatively lower proton conductivities. This may be due to the different distribution of ion-conducting domains in membrane. However, these membranes showed lower methanol diffusions in the range of 8.32 × 10⁻⁹ to 1.14 × 10⁻⁷ cm² s⁻¹ compared with that of Nafion (2 × 10⁻⁶ cm² s⁻¹) at the same temperature. The membranes also showed excellent mechanical properties (with a Young's modulus > 1 GPa and a tensile strength > 40 MPa). These results indicate that the SPEEKK membranes are promising materials for use in direct methanol fuel cell (DMFC) applications.     

PEMs with high proton conductivity and excellent methanol resistance based on sulfonated poly (aryl ether ketone sulfone) containing comb-shaped structures for DMFCs applications

Sulfonated poly (aryl ether ketone sulfone) polymers (SPAEKS-PSA X) with the comb-shaped structure were prepared by grafting with 1, 3-propanesultone (PSA). The successful synthesis of SPAEKS-PSA X was confirmed by the FT-IR spectra. The morphology of the membrane was investigated by the small angle X-ray scattering and the transmission electron microscopy. The nanophase separation was brought in a comb-shaped structure between the main chains and the propyl sulfonic acid groups. The SPAEKS-PSA 15 membrane exhibited the highest conductivity of 101 mS cm⁻¹ under 80 °C and 100% relative humidity conditions (100% RH). In addition, the methanol permeability coefficients of SPAEKS-PSA X membranes (7.56 × 10⁻⁷ to 9.44 × 10⁻⁷ cm² s⁻¹) were much lower compared to Nafion®117 (22.37 × 10⁻⁷ cm² s⁻¹). Meanwhile, the SPAEKS-PSA X membranes also displayed excellent mechanical properties (tensile modulus >30 MPa), thermal, oxidative stabilities and fuel cell performance. Considering the parameters above, especially the elevated proton conductivities as well as high methanol resistance, the comb-shaped structure is a promising design for DMFCs applications.     

Cross-linked poly(arylene ether ketone) electrolyte membranes with enhanced proton conduction for fuel cells

A new class of covalently cross-linkable poly(arylene ether ketone)s (cPAEKs) with sulfonic acid groups on both the backbone and pedant positions were synthesized. 3-Amino-1,5-napthalene disulfonic acid salt was chosen as a strong sulfonating agent for the preparation of csPAEK membranes with high sulfonation degree (SD). The major advantage of synthesized membranes is their exceptionally high-proton conductivities but still maintaining low methanol permeability and water uptake. All csPAEK membranes exhibited higher proton conductivity than Nafion^®117 over the temperature range of 40–90 °C. For example, among these membranes, csPAEK0 with the lowest SD shows a proton conductivities of 0.071 S cm⁻¹ at 40 °C and 0.118 S cm⁻¹ at 90 °C, which are higher than those of Nafion^®117 (0.057 S cm⁻¹ at 40 °C and 0.108 S cm⁻¹ at 90 °C). More interestingly, csPAEK0 appears to have a low water uptake, with values of only 22% at 40 °C and 27% at 90 °C, indicating high dimensional stability in hot water. Moreover, in many cases, csPAEK membranes with 15% cross-linking degree (CD) exhibited low methanol permeability, good thermal stability, and showed very high strain at break. The superior proton conduction, methanol permeation, and water uptake properties of the prepared membranes are of significant interest for both PEMFCs and DMFCs applications.     

Synthesis of the sulfonated poly(ether ether ketone ketone) proton exchange membrane with butane-1,4-diylbis(oxy) spacers and sulfopropyloxy pendants through Friedel-Crafts polyacylation

A novel proton exchange membrane composed of the sulfonated poly(ether ether ketone ketone) (SPEEKK) with butane-1,4-diylbis(oxy) spacers in the backbone and sulfopropyloxy pendants is synthesized through the Friedel-Crafts polyacylation of 1,4-diphenoxybutane (DPB), diethyl-3,3’-([1,1′-biphenyl]-2,2′-diylbis(oxy))bis(propane-1-sulfonate) (SBP–OEt), and terephthaloyl chloride (TPC) under mild conditions. The monomer DPB can introduce the flexible aliphatic butane-1,4-diylbis(oxy) spacers into the polymeric backbone and thus promote the formation of proton transport channels. The as-synthesized SPEEKK exhibits a high proton conductivity of 152.5 mS cm^?1 at 95 °C and 90% relative humidity (RH), a moderate water uptake of 53.2% at 100 °C and also a high ion exchange capacity of 1.74 mmol g^?1. These characteristics are attributed to the enhanced nanophase separation induced by the flexible butane-1,4-diylbis(oxy) spacers and hydrophilic sulfopropyloxy sidechains.     

Preparation of sulfonated poly(ether ether ketone)s containing amino groups/epoxy resin composite membranes and their in situ crosslinking for application in fuel cells

A series of amino-containing sulfonated poly(aryl ether ketone)/4,4′-diglycidyl(biphenyl) epoxy resin (DGBP) composite membranes for proton exchange membranes fuel cells (PEMFCs) are prepared by solution blending and casting. The reaction kinetics and the effects of introduction of DGBP content on the properties of the composite membranes are thoroughly investigated. The crosslinked composite membranes after treatment at either 120 °C or 200 °C have improved oxidative and dimensional stability than those without crosslinking. Despite the fact that crosslinked membranes generally have lower proton conductivity in comparison with the original ones, the proton conductivities of the membranes treated at 120 °C are above 2.22 × 10⁻² S cm⁻¹ at room temperature and 9.42 × 10⁻² S cm⁻¹ at 100 °C. Even for the samples treated at 200 °C, their proton conductivities are still higher than 1.26 × 10⁻² S cm⁻¹ at room temperature and higher than 8.67 × 10⁻² S cm⁻¹ at 100 °C, which are well satisfied with elementary requirement of fuel cells. In addition, all the evaluated membranes have low methanol permeability. For example, the methanol permeability of AP6FSPEEK/DGBP1 cured at 200 °C is 0.33 × 10⁻⁶ cm² s⁻¹, which is an order magnitude lower than Nafion 117. Therefore, these novel crosslinked composite membranes could be potential usage in fuel cells.     

Modification of sulfonated poly(ether ether ketone) proton exchange membrane for reducing methanol crossover

A drawback of sulfonated aromatic main-chain polymers such as sulfonated poly(ether ether ketone)s (SPEEKs) is their high methanol crossover when the proton conductivity is sufficient for direct methanol fuel cell (DMFC) applications. To overcome this disadvantage, in this paper, the SPEEK substrate was coated with the crosslinked chitosan (CS) barrier layer to form the two-layer composite membranes. Scanning electron microscope (SEM) micrographs showed that the CS layer was tightly adhered on the SPEEK substrate and the thickness of CS layer could be adjusted by varying the concentration of CS solution. It was noticed that with the increment of thickness of CS layer, the methanol diffusion coefficient of the composite membranes significantly dropped from 3.15 × 10⁻⁶ to 2.81 × 10⁻⁷ cm² s⁻¹ at 25 °C which was about one order of magnitude lower than those of the pure SPEEK and Nafion^® 117 membranes. In addition to the effective methanol barrier, the composite membranes possessed adequate thermal stability (the 5% weight lose temperature exceeded 240 °C) and good proton conductivity. The proton conductivity of all composite membranes was in the order of 10⁻² S cm⁻¹ and increased with the elevation of temperature. Furthermore, the composite membranes exhibited much higher selectivity (conductivity/methanol diffusion coefficient) compared with the pure SPEEK and Nafion^® 117 membranes. These results indicated that introducing the crosslinked CS layer onto the SPEEK surface was an effective method for improving the performance of the SPEEK membrane, especially for reducing the methanol crossover.     

Enhanced proton conductivity of poly (arylene ether ketone sulfone) containing uneven sulfonic acid side chains by incorporating imidazole functionalized metal-organic framework

In this study, the side-chain type hybrid proton exchange membranes which based on metal-organic frameworks (MOFs) and organic matrix of sulfonated poly (arylene ether ketone sulfone) containing both long and short sulfonic acid side chains (S-C-SPAEKS) were prepared. MOF-801 was used as a template and then imidazole was encapsulated into MOF-801 as additional proton carriers. In imidazole -MOF-801, imidazole was used as a functional group to coordinate with the zirconium metal site of the functional group. Imidazole-MOF-801 and hybrid membranes were characterized by XRD, ¹H NMR and FT-IR. These hybrid membranes exhibited excellent proton conductivities and good thermal stabilities. Compared to pure S-C-SPAEKS (0.0487 S cm^?1 at 30 °C, 0.0809 S cm^?1 at 80 °C), S-C-SPAEKS/0.5% Im-MOF-801 showed a great improvement (0.1205 S cm^?1 at 30 °C, 0.1992 S cm^?1 at 80 °C), which was about 2.5 times higher than that of pure S-C-SPAEKS and 2 times higher than that of commercial Nafion117 (0.1003 S cm^?1 at 80 °C). The results indicated that imidazole functionalized MOFs and uneven side chain structure synergistically made an important contribution to proton transport. This series of hybrid membranes have the potential to be used as alternative proton exchange membranes.     

Sulfonated titania submicrospheres-doped sulfonated poly(ether ether ketone) hybrid membranes with enhanced proton conductivity and reduced methanol permeability

Sulfonated titania submicrospheres (TiO₂-SO₃H) prepared through a facile chelation method are incorporated into sulfonated poly(ether ether ketone) (SPEEK) to fabricate organic-inorganic hybrid membranes with enhanced proton conductivity and reduced methanol permeability for potential use in direct methanol fuel cells (DMFCs). The pristine titania submicrospheres (TiO₂) with a uniform particle size are synthesized through a modified sol-gel method and sulfonated using 4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt as the sulfonation reagent. The sulfonation process is confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS). The hybrid membranes are systematically characterized in terms of thermal property, mechanical property, ionic exchange capacity (IEC), swelling behavior, and microstructural features. The methanol barrier property and the proton conductivity of the SPEEK/TiO₂-SO₃H hybrid membranes are evaluated. The presence of the fillers reduces methanol crossover through the membrane. Compared with the unsulfonated TiO₂-doped membranes, the TiO₂-SO₃H-doped ones exhibit higher proton conductivity due to the additional sulfonic acid groups on the surface of TiO₂. The hybrid membrane doped with 15 wt.% TiO₂-SO₃H submicrospheres exhibits an acceptable proton conductivity of 0.053 S cm⁻¹ and a reduced methanol permeability of 4.19 × 10⁻⁷ cm² s⁻¹.     

Facile synthesis of poly (arylene ether ketone)s containing flexible sulfoalkyl groups with enhanced oxidative stability for DMFCs

After tethering sodium 2-mercaptoethanesulfonate (MTS) to the bromomethylated poly(arylene ether ketone) precursor, a novel clustered sulfonated poly(arylene ether ketone) containing flexible sulfoalkyl groups (MTSPAEK) was prepared and used as polymer electrolyte membrane for application in DMFCs. The chemical structure and the degree of grafting of MTSPAEK copolymers were identified by ¹H NMR spectra. The resulted MTSPAEK copolymers exhibited excellent thermal stability (T_d5% > 259 °C) and good mechanical properties (tensile strength at break > 52 MPa). Compared to conventional sulfonated aromatic hydrocarbon polymers, MTSPAEK membranes displayed enhanced oxidative stability in Fenton's reagent owing to the elimination of free radicals by the sulfide groups located on the polymer side chains. Especially, MTSPAEK-2.10 with the highest content of flexible sulfoalkyl groups exhibited a highest proton conductivity of 0.181 S cm⁻¹ at 80 °C. It could be attributed to the obvious hydrophilic/hydrophobic phase-separated structure within the membrane, which was confirmed by AFM images. Moreover, MTSPAEK-2.10 membrane performed a peak power density of 70 mW cm⁻² in DMFC when feeding with 2 M methanol at 80 °C, which was comparable to the performance of recast Nafion as reported. Therefore, the combination of good thermal stability and mechanical properties, good oxidative stability, and good methanol barrier performance of MTSPAEK membranes indicated that they have potential to be alternative materials for PEMs in DMFCs.     

Nafion-assisted cross-linking of sulfonated poly(arylene ether ketone) bearing carboxylic acid groups and their composite membranes for fuel cells

In this study, a new type of cross-linked composite membrane is prepared and considered for its potential applications in direct methanol fuel cell. Nafion and sulfonated poly(arylene ether ketone) bearing carboxylic acid groups (SPAEK-C) are blended and subsequently cross-linked by a Friedel-Craft reaction using the carboxylic acid groups in the SPAEK-C to achieve lower methanol permeability. The perfluoroalkyl sulfonic acid groups of Nafion act as a benign solid catalyst, which assist the cross-linking of SPAEK-C. The physical and chemical characterizations of the cross-linked composite membranes are performed by varying the contents of SPAEK-C. The c-Nafion-15% membrane exhibits appropriate water uptake (10.49-25.22%), low methanol permeability (2.57 × 10⁻⁷ cm² s⁻¹), and high proton conductivity (0.179 S cm⁻¹ at 80 °C). DSC and FTIR analyze suggest the cross-linking reaction. These results show that the self-cross-linking of SPAEK-C in the Nafion membrane can effectively reduce methanol permeability while maintaining high proton conductivity.     

Novel branched sulfonated poly(ether ether ketone)s membranes for direct methanol fuel cells

In this article, novel branched sulfonated poly(ether ether ketone)s (Br-SPEEK) containing various amounts of 1,3,5-tris(4-fluorobenzoyl)benzene as the branching agent have been successfully prepared. Compared with the traditional linear polymer membranes, the membranes prepared by Br-SPEEK showed improved mechanical strength, excellent dimensional stability and superior oxidative stability with similar proton conductivity. Notably, the Br-SPEEK-10 membrane began to break after 267 min in Fenton's reagent at 80 °C, which was 4 times longer than that of the L-SPEEK. Although the proton conductivity decreased with the addition of the branching agent, satisfying methanol permeability value was observed (down to 6.3 × 10⁻⁷ cm² s⁻¹), which was much lower than Nafion 117 (15.5 × 10⁻⁷ cm² s⁻¹). All the results indicated that the novel branched sulfonated poly(ether ether ketone)s membrane was potential candidate as proton conductive membranes for application in fuel cells.     

Composite membranes based on sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety and poly(amic acid) for proton exchange membrane fuel cell application

Composite membranes based on sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety and poly(amic acid) with oligoaniline in the main chain have been prepared and immersed in H₃PO₄ to obtain acid-doped composite films. As expected, the water uptake values and methanol permeability of the composite membranes decrease with the increase of the weight fraction of PAA in the membrane matrix. Notably, the SPEEK-6F/PAA-15 shows a water uptake of 13.2% and a methanol permeability of 0.9 × 10⁻⁷ cm² s⁻¹, which are much lower than those of the Nafion (28.6% and 15.5 × 10⁻⁷ cm² s⁻¹, respectively). Although the proton conductivities decrease after the addition of PAA, higher selectivity values are obtained with the composite membranes. Therefore, the SPEEK-6F/PAA blend membranes, with the improved proton conductivity, methanol resistance and good thermal stability, can be used as a good alternative for proton conductive membranes with potential application in proton exchange membrane fuel cells (PEMFCs).     

Sulfonated mesoporous benzene-silica-embedded sulfonated poly(ether ether ketone) membranes for enhanced proton conduction and anti-dehydration

In polymer electrolyte fuel cell operation, a decrease in the proton conductivity of the membrane at reduced humidity is a main cause for poor cell performance at high temperature. To alleviate the dehydration of the membrane at high temperature, sulfonated mesoporous benzene-silica (sMBS) particles are embedded in sulfonated poly(ether ether ketone) (sPEEK) membranes. As the sMBS itself is highly sulfonated on both organic and inorganic moieties, the proton conductivity of composite membranes is much higher than that of the pristine sPEEK membrane, and it reaches that of Nafion 117 at a high relative humidity (RH) of 90%. The dehydration rate of the membrane is reduced significantly by the capillary condensation effect of sMBS particles with the nanometer-scale 2-D hexagonal cylindrical pores, and the proton conductivity of the composite membranes, 0.234 × 10⁻¹ S cm⁻¹, is much higher than that of pristine sPEEK membrane, 0.59 × 10⁻³ S cm⁻¹, at a relatively low humidity of 40% RH. This maintenance of high conductivity at low humidity is attributed to the high water-holding capacity of the sMBS proton conductors. The sMBS-embedded sPEEK composite membranes show a much lower methanol permeability of 2–5 × 10⁻⁷ cm² s⁻¹ compared to that of Nafion 117, which is 1.6 × 10⁻⁶ cm² s⁻¹ at room temperature.     

Crosslinked sulfonated poly(arylene ether ketone) membranes bearing quinoxaline and acid-base complex cross-linkages for fuel cell applications

A series of crosslinkable sulfonated poly(arylene ether ketone)s (SPAEKs) were synthesized by copolymerization of 4,4′-biphenol with 2,6-difluorobenzil and 5,5′-carbonyl-bis(2-fluorobenzene-sulfonate). A facile crosslinking method was successfully developed, based on the cyclocondensation reaction of benzil moieties in polymer chain with 3,3′-diaminobenzidine to form quinoxaline groups acting as covalent and acid-base ionic crosslinking. The uncrosslinked and crosslinked SPAEK membranes showed high mechanical properties and the isotropic membrane swelling, while the later became insoluble in tested polar aprotic solvents. The crosslinking significantly improved the membrane performance, i.e., the crosslinked membranes had the lower membrane dimensional change, lower methanol permeability and higher oxidative stability than the corresponding precursor membranes, with keeping the reasonably high proton conductivity. The crosslinked membrane (C-B4) with an ion exchange capacity of 2.02 mequiv. g⁻¹ showed a reasonably high proton conductivity of 111 mS cm⁻¹ with a low water uptake of 42 wt% at 80 °C. C-B4 exhibited a low methanol permeability of 0.55 × 10⁻⁶ cm² s⁻¹ for 32 wt% methanol solution at 25 °C. The crosslinked SPAEK membranes have potential for PEFC and DMFC applications.     

Synthesis and properties of sulfonated poly(arylene ether ketone sulfone) containing amino groups/functional titania inorganic particles hybrid membranes for fuel cells

In this work, the organic-inorganic hybrid membranes were prepared. The synthesis and properties of the hybrid membranes were investigated. The sulfonated poly(arylene ether ketone sulfone) containing amino groups (Am-SPAEKS) was synthesized by nucleophilic polycondensation. The sol-gel method was used to prepared functional titania inorganic particles (L-TiO₂). The ¹H NMR and FT-IR were performed to verified the structure of Am-SPAEKS and L-TiO₂. The organic-inorganic hybrid membranes showed both good thermal stabilities and mechanical properties than that of Am-SPAEKS. The L-Am-15% membrane exhibited the highest Young's modulus (2262.71 MPa) and Yield stress (62.09 MPa). The distribution of L-TiO₂ particles was revealed by SEM. Compared to Am-SPAEKS, the hybrid membranes showed higher proton conductivities. The L-Am-15% exhibited the highest proton conductivity of 0.0879 S cm⁻¹ at 90 °C. The results indicate that the organic-inorganic hybrid membranes have potential for application in proton exchange membrane fuel cells.     

Macromolecule sulfonated Poly(ether ether ketone) crosslinked poly(4,4′-diphenylether-5,5′-bibenzimidazole) proton exchange membranes: Broaden the temperature application range and enhanced mechanical properties

Proton exchange membranes with a wide application temperature range were fabricated to start high-temperature fuel cells under room temperature. The volume swelling stability, oxidative stability as well as mechanical properties of crosslinked membranes have been improved for covalently crosslinking poly(4,4′-diphenylether-5,5′-bibenzimidazole) (OPBI) with fluorine-terminated sulfonated poly(ether ether ketone) (F-SPEEK) via N-substitution reactions. High proton conductivity was simultaneously realized at both high (80–160 °C) and low (40–80 °C) temperatures by crosslinking and jointly constructing hydrophilic-hydrophobic channels. The crosslinked membranes exhibited the highest proton conductivity of 191 mS cm⁻¹ at 80 °C under 98% relative humidity (RH) and 38 mS cm⁻¹ at 160 °C under anhydrous, respectively. Compared with OPBI membrane, the fuel cell performance of the crosslinked membranes showed higher peak power density at full temperature range (40–160 °C).     

Branched poly(ether ether ketone) based anion exchange membrane for H2/O2 fuel cell

High-performance anion exchange membranes (AEMs) are in need for practical application of AEM fuel cells. Novel branched poly(ether ether ketone) (BPEEK) based AEMs were prepared by the copolymerization of phloroglucinol, methylhydroquinone and 4,4′-difluorobenzophenone and following functionalization. The effects of the branched polymer structures and functional groups on the membrane's properties were investigated. The swelling ratios of all the membranes were kept below 15% at room temperature and had good dimensional stability at elevated temperatures. The branching degree has almost no effect on the dimensional change, but plays a great role in tuning the nanophase separation structure. The cyclic ammonium functionalized membrane showed a lower conductivity but a much better stability than imidazolium one. The BPEEK-3-Pip-53 membrane with the branching degree of 3% and piperidine functionalization degree of 53% showed the best performances. The ionic conductivity was 43 mS cm⁻¹ at 60 °C. The ionic conductivity in 1 M KOH at 60 °C after 336 h was 75% of its initial value (25% loss of conductivity), and the IEC was 83% of its initial value (17% loss of IEC), suggesting good alkaline stability. The peak energy density (60 °C) of the single H₂/O₂ fuel cell with BPEEK-3-Pip-53 membrane reached 133 mW cm⁻² at 260 mA cm⁻².