Cu2S@NiFe layered double hydroxides nanosheets hollow nanorod arrays self-supported oxygen evolution reaction electrode for efficient anion exchange membrane water electrolyzer

Herein, we prepared highly active self-supported Cu₂S@NiFe layered double hydroxides nanosheets (LDHs) oxygen evolution reaction (OER) electrode (Cu₂S@NiFe LDHs/Cu foam) with three-dimensional (3D) multilayer hollow nanorod arrays structure, which is composed of the outer layer (two-dimensional (2D) NiFe LDHs) and the inner layer (one-dimensional (1D) Cu₂S hollow nanorod arrays). The unique structure of NiFe LDHs and Cu₂S hollow nanorod composites can expose more active sites, and simultaneously promote electrolyte penetration and gas release during the water electrolysis process. Thus, the Cu₂S@NiFe LDHs/Cu foam electrode exhibits a significant OER performance, with the overpotentials of 230 and 286 mV at 50 and 100 mA cm⁻², respectively. Anion exchange membrane water electrolyzer (AEMWE) with the prepared electrode can attain a voltage of 1.56 V at the current density of 0.50 A cm⁻², showing a good performance that is comparable to the-state-of-the-art AEMWE in 1 M KOH. In addition, the AEMWE can be run for 300 h at the current density of 0.50 A cm⁻². The high performance and good stability of AEMWE are attributed to the special structure of the OER electrode, which can prevent the agglomeration of nanosheets and thus expose more active sites at the edge of the nanosheets.     

CoO/NF nanowires promote hydrogen and oxygen production for overall water splitting in alkaline media

The exploration of catalysts with high activity and low cost for water splitting is still necessary. Herein, a nanowire-like morphology CoO/NF electrode is synthesized using facile hydrothermal reaction and calcination treatment. The urea can regulate its morphology during the synthetic process of CoO/NF. Electrochemical studies reveal that the as-obtained CoO/NF exhibits excellent electrocatalytic performance with overpotential of 307 mV at current density of 10 mA cm⁻² and Tafel slope of 72 mV dec⁻¹ for oxygen evolution reaction, and CoO/NF delivers current density of 10 mA cm⁻² at overpotential of 224 mV for hydrogen evolution reaction. The results of the oxygen evolution reaction stability show that the overpotential of CoO/NF electrode is only increased by 4 mV at current density of 10 mA cm⁻². The two-electrode water splitting with CoO/NF electrodes as both anode and cathode needs a cell potential of 1.76 V to reach 10 mA cm⁻². Therefore, this simple method to prepare CoO/NF electrode can enhance the properties of electrocatalysts, which makes CoO/NF a promising material to replace noble metal-based catalysts.     

One-step electrodeposition of cauliflower-like Ni–Fe–Sn particles as a highly-efficient electrocatalyst for the hydrogen evolution reaction

Herein, a Ni–Fe–Sn coating was synthesized in-situ on Ni mesh by one-step electrodeposition at different durations. The Ni–Fe–Sn60 electrode obtained after 1 h deposition exhibits cauliflower-like morphology and the best electrocatalytic properties for the hydrogen evolution reaction (HER) compared to other electrodes. The electrode requires an overpotential of 43 mV at a current density of 10 mA cm⁻² and a small Tafel slope of 70 mV dec⁻¹ in a 1 M KOH solution. Moreover, the electrode shows outstanding stability in prolonged electrolysis and overall water splitting performance, generating a current density of 93 mA cm⁻² at 1.8 V, which is thrice that of an industry electrode. This electrocatalytic activity is ascribed to the high active surface area produced by the cauliflower-like Ni–Fe–Sn particles and the synergistic interaction of Ni, Fe and Sn. The simple synthesis method and excellent performance endow this electrode with great potential for large-scale applications.     

Yuba-like porous carbon microrods derived from celosia cristata for high-performance supercapacitors and efficient oxygen reduction electrocatalysts

Here, a novel yuba-like porous carbon microrod is prepared via a simple and facile strategy by using the fluffy fibers of celosia cristata petals (FCCP) as the raw material. The optimized carbon microrod (FCCP-CM-900) possesses unique yuba-like structure, high specific surface area (1680 m² g⁻¹) and large pore volume (0.98 cm³ g⁻¹), and effective nitrogen (∼4.52 at.%) and oxygen (∼5.49 at.%) doping, which can enhance the wettability and conductivity (7.9 S cm⁻¹). As the electrode material for supercapacitor, FCCP-CM-900-based supercapacitor presents high specific capacitance (314.5 F g⁻¹ at 0.5 A g⁻¹) in 6.0 M KOH aqueous electrolyte. The FCCP-CM-900-based symmetrical supercapacitor displays high energy density (18.6 Wh kg⁻¹ at 233.4 W kg⁻¹) and outstanding cycling stability (98% capacitance retention after 10,000 cycles) in 1.0 M Na₂SO₄ electrolyte. In addition, served as oxygen reduction electrocatalyst, the FCCP-CM-900 also exhibits excellent catalytic activity, good durability, together with high methanol tolerance in alkaline electrolyte, which makes it a highly efficient air cathode material toward zinc–air cell.     

Zr doped BaFeO3-δ as a robust electrode for symmetrical solid oxide fuel cells

A BaFe_0.9Zr_0.1O_3-δ (BFZ) is successfully synthesized and its characteristics are investigated. The oxide exhibits high stability and a cubic perovskite structure in a reducing atmosphere. A La_0.9Sr_0.1Ga_0.8Mg_0.2O_3-δ (LSGM) supported symmetrical solid oxide fuel cell (SOFC) with BFZ electrode demonstrates a maximum power density of 1097 mW cm⁻² using humidified H₂ as the fuel and ambient air as the oxidant at 800 °C. And as low as 0.190 Ω cm² of polarization resistance of single cell is observed at 650 °C. Moreover, the electrode demonstrates high stability in 100 h test, as well as redox stability in both oxidizing and reducing atmospheres. The high electrochemical property and good stability suggest that the BFZ is promising candidate for symmetrical SOFC electrode.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

The properties of the fuel electrode of solid oxide cells under simulated seawater electrolysis

In this study, electrolysis of seawater in flat-tube nickel-yttria-stabilized zirconia (Ni-YSZ) electrode-supported solid oxide electrolysis cells (SOECs) were modeled and the effects of variations in electrical conductivity and microstructure of Ni-YSZ electrode support were investigated. When the current density was greater than 700 mA·cm⁻², the conductivity of the electrode support decreased slightly with an increase in current density at 800 °C in hydrogen reduction environment; the conductivity of the electrode support decreased with an increase in the current density when the current density was greater than 400 mA·cm⁻² at 800 °C in the seawater electrolysis environment. During long-term durability experiment of seawater electrolysis, the degradation rates in area specific resistance (ASR) were 0.096 mΩ·cm²/100 h and 0.207 mΩ·cm²/100 h with a current density of 300 mA·cm⁻² (i.e., ≤400 mA·cm⁻²) and 1000 mA·cm⁻² (i.e., ≥400 mA·cm⁻²), respectively. Besides, the various ions commonly present in seawater did not contaminate the Ni-YSZ support during the long-term durability test. The degradation mechanism of seawater electrolysis in flat-tube SOECs is discussed and clarified.     

One-pot sonochemical synthesis of hierarchical MnWO4 microflowers as effective electrodes in neutral electrolyte for high performance asymmetric supercapacitors

In this article, manganese tungstate (MnWO₄) microflowers as electrode materials for high performance supercapacitor applications are prepared by a one-pot sonochemical synthesis. The crystalline structure and morphology of MnWO₄ microflowers are characterized through X-ray diffraction, field emission scanning electron microscopy. The electrochemical properties of the MnWO₄ microflowers are investigated using cyclic voltammograms, galvanostatic charge/discharge and electrochemical impedance spectroscopy. The MnWO₄ microflowers as electrode materials possess a maximum specific capacitance of 324 F g⁻¹ at 1 mA cm⁻² in the potential window from 0 to +1 V and an excellent cycling stability of 93% after 8000 cycles at a current density of 3 mA cm⁻². An asymmetric supercapacitor device is fabricated using the MnWO₄ and iron oxide (Fe₃O₄)/multi-wall carbon nanotube as the positive and negative electrode materials, it can be cycled reversibly at a potential window at 1.8 V. The fabricated ASC device can deliver a high energy density of 34 Wh kg⁻¹ at a power density of 500 W kg⁻¹ with cycling stability of 84% capacitance retained after 3000 cycles. The above results demonstrate that MnWO₄ microflowers can be used as promising high capacity electrode materials in neutral electrolyte for high performance supercapacitors.     

Enhanced oxygen evolution reaction activity of NiFe layered double hydroxide on nickel foam- reduced graphene oxide interfaces

Herein, we prepared a novel nickel iron-layered double hydroxide/reduced graphene oxide/nickel foam (NiFe-LDH/RGO/NF) electrodes by two step electrodeposition processes for oxygen evolution reaction (OER). The modification of NF by RGO increased the interface conductivity and electrochemical active surface areas (ECSA) of the electrode. The NiFe-LDH/RGO/NF electrode has shown higher catalytic activity with a lower overpotential of 150 mV at the current density of 10 mA cm⁻². The NiFe-LDH/RGO/NF electrode has also shown a small Tafel slope of 35 mV per decade due to the synergy effect between the larger ECSA and the conductive RGO interface. Furthermore, the electrodes exhibits almost 10 h stability under a general current density of 10 mA cm⁻².     

A promising strontium and cobalt-free air electrode Pr1-xCaxFeO3-δ for solid oxide electrolysis cell

A promising strontium and cobalt-free ferrite Pr_1-xCa_xFeO_3-δ (PCF, x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) has been synthesized successfully by glycine-nitrate combustion method and used as the air electrode of solid oxide electrolysis cell (SOEC) for steam electrolysis. The crystal structure and electricity conductivity of PCF are investigated in detail. According to the conductivity test, Pr_0.6Ca_0.4FeO_3-δ (PCF64) with higher conductivity is selected as the air electrode to preparing the single cell with structure of PCF64|GDC|SSZ|YSZ-NiO. Under SOFC mode, the maximum power density of the single cell is 462.93 mW cm⁻² at 800 °C with hydrogen as fuel. Under SOEC mode, the current density reaches 277.14 mA cm⁻² and the corresponding hydrogen production rates is 115.84 mL cm⁻² h⁻¹ at 800 °C at 1.3 V. In the 10 h short-term stability test, the cell shows good electrolysis stability.     

Facile one pot sonochemical synthesis of CoFe2O4/MWCNTs hybrids with well-dispersed MWCNTs for asymmetric hybrid supercapacitor applications

In this study, a facile sonochemical strategy is used for the fabrication of CoFe₂O₄/MWCNTs hybrids as an electrode material for supercapacitor applications. FE-SEM image demonstrates the uniformly well-distributed MWCNTs as well as porous structures in the prepared CoFe₂O₄/MWCNTs hybrids, suggesting 3D network formation of conductive pathway, which can enhance the charge and mass transport properties between the electrodes and electrolytes during the faradic redox reactions. The as-fabricated CoFe₂O₄/MWCNTs hybrids with the MWCNTs concentration of 15 mg (CFC15) delivers maximum specific capacitance of 390 F g⁻¹ at a current density of 1 mA cm⁻², excellent rate capability (275 F g⁻¹ at 10 mA cm⁻²), and outstanding cycling stability (86.9% capacitance retention after 2000 cycles at 3 mA cm⁻²). Furthermore, the electrochemical performance of the CFC15 is superior to those of pure CoFe₂O₄ and other CoFe₂O₄/MWCNTs hybrids (CFC5, CFC10 and CFC20), indicating well-dispersion MWCNTs and uniform porous structures. Also, as-fabricated asymmetric supercapacitor device using the CoFe₂O₄/MWCNTs hybrids as the positive electrode and activated carbon as the negative electrode materials shows the outstanding supercapacitive performance (high specific capacitance, superior cycling stability and good rate capability) for energy storage devices. It delivers a capacitance value of 81 F g⁻¹ at 3 mA cm⁻², ca. 92% retention of its initial capacitance value after 2000 charge-discharge cycles and excellent energy density (26.67 W h kg⁻¹) at high power density (~319 W kg⁻¹).     

Walnut shell-derived hierarchical porous carbon with high performances for electrocatalytic hydrogen evolution and symmetry supercapacitors

Walnut Shell-derived hierarchical porous carbon has been successfully synthesized by the efficient KOH activation process. The hierarchical porous carbon material activated at 600 °C, has the specific micropore area of 1037.31 m² g⁻¹ and micropore volume of 0.51 cm³ g⁻¹, which leads to have electrochemical performances of the hydrogen evolution reaction (HER) and supercapacitors. Specifically, as the hydrogen evolution reaction electrocatalyst, the walnut shell-derived carbon material activated at 600 °C exhibits a lower onset potential of 6.00 mV, a smaller Tafel slope of 69.76 mV dec⁻¹ and outstanding stability above long-term cycling. As a supercapacitor electrode material, the sample possesses specific capacitance of 262.74 F g⁻¹ at 0.5 A g⁻¹, the remarkable rate capability of 224.60 F g⁻¹ at even 10 A g⁻¹ and good long-term stability. A symmetric supercapacitor shows the highly energy density of 7.97 Wh kg⁻¹ at a power density of 180.80 W kg⁻¹. This novel and low-cost biomass material is very promising for the electrocatalytic water splitting and supercapacitors.     

Efficient MnO and Co nanoparticles coated with N-doped carbon as a bifunctional electrocatalyst for rechargeable Zn-air batteries

Developing the low-cost, durable, and efficient bifunctional electrocatalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) plays an important role in the commercial implementation of the Zn-air batteries. Herein, we design and synthesize the MnO and Co nanoparticles coated with N-doped carbon (MC@NC) as an excellent bifunctional oxygen electrocatalyst. It is found that the optimal MC@NC-0.3 exhibits outstanding ORR performance with a positive half-wave potential of 0.82 V and excellent OER activity with a small overpotential of 360 mV at 10 mA cm⁻². When applied in the liquid Zn-air battery, MC@NC-0.3 displays a high maximum power density of 153 mW cm⁻², a large specific capacity of 776 mAh g⁻¹ and the excellent cycling stability with a negligible increase after 300 h. Furthermore, the fiber-shaped all-solid-state Zn-air battery also displays remarkable stability at high current density. This study offers a facile strategy to construct a high-efficient, low-cost, and durable transitional metal-based bifunctional electrode for renewable energy applications.     

Nano-structured LSM-YSZ refined with PdO/ZrO2 oxygen electrode for intermediate temperature reversible solid oxide cells

To promote the application of traditional (La_0.8Sr_0.2)_0.95MnO_3-δ-YSZ (LSM-YSZ) oxygen electrodes to both solid oxide fuel cells (SOFCs) and solid oxide electrolysis cells (SOECs) modes at intermediate temperatures, we select PdO as the catalyst and ZrO₂ as the PdO stabilizer to decorate the LSM-YSZ. The high active PdO particles enhance the electrocatalytic activity, and stable ZrO₂ can hinder the growth and agglomeration of the PdO particles. PdO and ZrO₂ are co-impregnated into the LSM-YSZ to form a nano-structured PdO/ZrO₂ -LSM-YSZ composite electrode. At 750 °C, the obtained cell attains a power density peak of 1.114 W cm⁻² in SOFC mode and shows significant improvement of the cell with LSM-YSZ composite oxygen electrode. As a SOEC, when the water content is 90 vol%AH (absolute humidity) at the hydrogen electrode, the cell exhibits an extraordinary current density of 2.322 A cm⁻² under applied voltage of 2.0 V at 750 °C. Moreover, the cell shows notable long-term stability during water electrolysis. Therefore, this study demonstrates that the nano-structured PdO/ZrO₂ -LSM-YSZ based material as a high active and stable oxygen electrode can greatly promote the application of LSM-YSZ electrode in reversible solid oxide electrolysis cell (RSOCs) field.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Novel 3-D urchin-like Ni– Co–W porous nanostructure as efficient bifunctional superhydrophilic electrocatalyst for both hydrogen and oxygen evolution reactions

Fabrication of an electrocatalyst with remarkable electrocatalytic activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for the production of hydrogen energy. In this study, Ni–Co–W alloy urchin-like nanostructures were fabricated by binder-free and cost-effective electrochemical deposition method at different applied current densities and HER and OER electrocatalytic activity was studied. The results of this study showed that the microstructure and morphology are strongly influenced by the electrochemical deposition parameters and the best electrocatalytic properties are obtained at the electrode created at the 20 mA.cm⁻²applied current density. The optimum electrode requires −66 mV and 264 mV, respectively, for OER and HER reactions for delivering the 10 mA cm⁻² current density. The optimum electrode also showed negligible potential change after 10 h electrolysis at 100 mA cm⁻², which means remarkable electrocatalytic stability. In addition, when this electrode used as a for full water splitting, it required only 1.58 V to create a current density of 10 mA cm⁻². Such excellent electrocatalytic activity and stability can be related to the high electrochemical active surface area, being binder-free, high intrinsic electrocatalytic activity and hydrophilicity. This study introduces a simple and cost-effective method for fabricating of effective electrodes with high electrocatalytic activity.     

Tunable Fe/N co-doped 3D porous graphene with high density Fe-Nx sites as the efficient bifunctional oxygen electrocatalyst for Zn-air batteries

Nitrogen-doped transition metal materials display promising potential as bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, Fe/N co-doped three-dimensional (3D) porous graphene (FeN-3D-PG) is prepared via a template method using sodium alginate as the carbon source and low polymerization degree melamine resin as the nitrogen source. The low polymerization degree melamine resin can form complexes with Fe³⁺ in the aqueous solution and further forms high density Fe-N_x active sites during pyrolysis. Meanwhile, the formed 3D porous structure efficiently promotes the uniform distribution of Fe-N_x active sites. The FeN-3D-PG catalyst exhibits pH-independent ORR activity. For OER, the catalyst possesses a low over potential (370 mV at 10 mA cm⁻²) in alkaline electrolyte. The Zn-air batteries (ZABs) using FeN-3D-PG as cathode exhibits a power density up to 212 mW cm⁻², a high specific capacity of 651 mAh g⁻¹, and the charge-discharge stability of 80 h. This work provides new sight to transition metal materials based ZABs with excellent performance.     

High-density oxygen-enriched graphene hydrogels for symmetric supercapacitors with ultrahigh gravimetric and volumetric performance

The contradiction between the porous structure and density of graphene materials makes it unable to meet the dual requirements of the next generation supercapacitors for gravimetric capacitance and volumetric capacitance. Herein, we successfully synthesized high-density oxygen-enriched graphene hydrogels (HOGHs) by a one-step hydrothermal method using high concentration graphene oxide (GO) solution and trometamol as precursors. The as-prepared HOGHs samples present a dense 3D network structure and moderate specific surface areas, which leads to a high packing density. In addition, the HOGHs samples also contain abundant oxygen-containing functional groups and some nitrogen-containing functional groups. These heteroatomic functional groups can provide pseudocapacitance for the electrode materials. Therefore, the HOGH-140 based symmetric supercapacitor shows ultrahigh gravimetric and volumetric specific capacitance (325.7 F g⁻¹, 377.8 F cm⁻³), excellent rate performance and cycling stability. Simultaneously, the symmetric binder-free supercapacitor exhibits high gravimetric specific energy density (11.3 Wh kg⁻¹) and volumetric specific energy density (13.1 Wh L⁻¹) in 6 M KOH, respectively. These outstanding properties make the material have a good application prospect in the field of compact energy storage devices.     

Effect of graphene on the performance of nickel foam-based CoNi nanosheet anode catalyzed direct urea-hydrogen peroxide fuel cell

The highly porous electrode of a crisscrossed CoNi nanosheets array grown on reduced graphene oxide decorated Ni foam (CoNi/rGO@Ni foam) is fabricated through a facile dip and dry method followed by electroreduction and electrodeposition methods. The phase composition and morphology of the electrode are characterized by XRD, SEM, TEM, and EDS. In single electrode tests, CoNi/rGO@Ni foam electrode displays an excellent catalytic performance (330 mA cm⁻² at 0.6 V) and stability towards urea electrooxidation when comparing to Ni foam and CoNi nanosheets modified Ni foam (CoNi@Ni foam) electrode. Besides, a low initial oxidation potential of urea electro-oxidation to 0.14 V is achieved on the CoNi/rGO@Ni foam electrode. The introducing of rGO to the electrode greatly reduced the reaction activation energy from 14.47 to 10.35 kJ mol⁻¹. Besides, large active surface area (261.67 cm²) is also obtained from the electrode. The CoNi/rGO@Ni foam anode exhibits a maximum power density of 12.58 mW cm⁻² in direct urea-hydrogen peroxide fuel cell tests. Excellent performance shows in single electrode tests and fuel cell tests suggest that addition of rGO to the electrode is an easy and feasible method to enhance the performance of the catalyst.     

Feasibility of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells based in phosphoric acid-doped membrane

Factors as the Pt/C ratio of the catalyst, the binder content of the electrode and the catalyst deposition method were studied within the scope of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells (HT-PEMFCs). The Pt/C ratio of the catalyst allowed to tune the thickness of the catalytic layer and so to minimize the detrimental effect of the phosphoric acid flooding. A membrane electrode assembly (MEA) with 0.05 mg_Ptcm⁻² at anode and 0.1 mg_Ptcm⁻² at cathode (0.150 mg_Ptcm⁻² in total) attained a peak power density of 346 mW cm⁻². It was proven that including a binder in the catalytic layer of ultra-low Pt loading electrodes lowers its performance. Electrospraying-based MEAs with ultra-low Pt loaded electrodes (0.1 mg_Ptcm⁻²) rendered the best (peak power density of 400 mW cm⁻²) compared to conventional methods (spraying or ultrasonic spraying) but with the penalty of a low catalyst deposition rate.