Co/Mo2C composites for efficient hydrogen and oxygen evolution reaction

Non-precious transition metal electrocatalysts with high catalytic performance and low cost enable the scalable and sustainable production of hydrogen energy through water splitting. In this work, based on the polymerization of CoMoO₄ nanorods and pyrrole monomer, a heterointerface of carbon-wrapped and Co/Mo₂C composites are obtained by thermal pyrolysis method. Co/Mo₂C composites show considerable performance for both hydrogen and oxygen evolution in alkaline media. In alkaline media, Co/Mo₂C composites show a small overpotential, low Tafel slope, and excellent stability for water splitting. Co/Mo₂C exhibits a small overpotential of 157 mV for hydrogen evolution reaction and 366 mV for oxygen evolution reaction at current density of 10 mA cm⁻², as well as a low Tafel slope of 109.2 mV dec⁻¹ and 59.1 mV dec⁻¹ for hydrogen evolution reaction and oxygen evolution reaction, respectively. Co/Mo₂C composites also exhibit an excellent stability, retaining 94% and 93% of initial current value for hydrogen evolution reaction and oxygen evolution reaction after 45,000 s, respectively. Overall water splitting via two-electrode water indicates Co/Mo₂C can hold 91% of its initial current after 40,000 s in 1 M KOH.     

Silicon monoxide assisted synthesis of Ru modified carbon nanocomposites as high mass activity electrocatalysts for hydrogen evolution

Extremely low content of Ruthenium (Ru) nanoparticles were loaded on the carbon black (Ru/C) via reducing Ru ions with silicon monoxide. The obtained Ru/C nanocomposites exhibit an exciting electrochemical catalytic activity for hydrogen evolution reaction (HER) in the oxygen-free 0.5 M H₂SO₄ medium. The optical one (Ru/C-2) with a low Ru amount of 2.34% shows higher activity than previously reported Ru-based catalysts. The overpotential at 10 mA cm⁻² is 114 mV and the Tafel slope is 67 mV·dec⁻¹. Ru/C-2 catalyst also has good stability. The overpotential that afford the current density of 10 mA cm⁻² of 20 wt% Pt/C increased 92 mV while that of Ru/C-2 only increased 50 mV after a 30,000 s chronopotentiometry test. Furthermore, the mass activity of Ru/C-2 catalyst is even better than that of the commercial 20 wt% Pt/C when the overpotential is larger than 0.18 V. This silicon monoxide-mediated strategy may open a new way for the fabrication of high performance electrocatalysts.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

Facile galvanic replacement method for porous Pd@Pt nanoparticles as an efficient HER electrocatalyst

In realm of renewable energy, development of an efficient and durable electrocatalyst for H₂ production through electrochemical hydrogen evolution reaction (HER) is indispensable. Herein, we demonstrate a simple preparation of carbon-supported nanoporous Pd with surface coated Pt (CS–PdPt) by a simple galvanic replacement reaction (GRR). The phase purity and porosity have been confirmed by XRD, HRTEM, and N₂ sorption techniques. As HER electrocatalyst, CS-PdPt showed a low overpotential of 26 mV in 0.5 M H₂SO₄ at current density of 10 mA cm⁻², which is lower than the commercial Pt/C electrode. The CS-PdPt catalyst exhibits an overpotential of 46 mV in 1 M KOH, and 50 mV in neutral buffer (1 M PBS) at 10 mA cm⁻². The CS-PdPt furnished with small Tafel values of 33, 88, and 107 mV dec⁻¹ in acidic, alkaline, and neutral medium, respectively. Accelerated durability test at 100 mV s⁻¹ for 1000 cycles demonstrated a negligible change in HER activity.     

Heterogeneous cobalt phosphides nanoparticles anchored on carbon cloth realizing the efficient hydrogen generation reaction

Intrinsic activity modifying of electrocatalysts is crucial to realizing the excellent catalytic performance towards hydrogen evolution reaction. Herein, we demonstrate a highly efficient electrocatalyst based on heterogeneous cobalt phosphides nanoparticles. The ultrafine size of the as-prepared catalyst (∼5 nm) ensures the efficient extension of active sites. Furthermore, the incorporation of orthorhombic CoP and Co₂P contributes to the improvement of the inherent catalytic property. As a consequence, the as-prepared heterogeneous cobalt phosphides nanoparticles supported on carbon cloth exhibit impressive electrocatalytic activity, which only acquire a small overpotential of 90 mV at a current density of 10 mA cm⁻², and present a low Tafel slope (67.9 mV dec⁻¹), a large exchange current density (0.58 mA cm⁻²) as well as good durability. Therefore, this work provides a favorable guidance for exploring executable strategies to improve catalyst activity.     

Stacked Co6W6C nanocrystals anchored on N-doping carbon nanofibers with excellent electrocatalytic performance for HER in wide-range pH

High purity H₂ formed by electrochemical water splitting is profound potential green energy. Exploiting advanced electrocatalysts for hydrogen evolution reaction (HER) in both acidic and base environment is of critical significance. Herein, we report a novel hybrid comprising stacked cobalt tungsten carbides nanocrystals on N-doping carbon matrix (Co₆W₆C–N@CNFs) as a superb HER catalyst over the entire pH range via facile electrospinning and CVD method. On account of its ultrathin size and the strong synergetic interaction between bimetals, coupled with the superior conductivity of N-doping CNFs, Co₆W₆C–N@CNFs presents superior catalytic properties, with low overpotentials of 86 and 116 mV at η₁₀ and small Tafel slopes of 85 and 101 mV dec⁻¹ in acidic and alkali, respectively, as well as outstanding long-term stability, rivalling its potential to be used intensively in water electrolysis technologies.     

Engineering multiphase for activating electroactive sites for highly efficient hydrogen evolution: Experimental and theoretical investigation

An ideal electrocatalyst for the hydrogen evolution reaction of water splitting requires substantial active sites with high catalytic activity, fast electron and mass transfer, low gas adsorption energy, and high stability. However, a single component catalyst usually has only one of the many properties of an ideal electrocatalyst. Herein, for the first time, we synthesize Co_xSe/MoSe₂ micro-prisms on foam via a hydrothermal and selenization strategy. After selenization, a crystallized CoMoO₄ smooth prismatic structure can be converted into a Co_xSe/MoSe₂ prismatic structure with lamellar morphology. Such synergistic effects lead to Co_xSe/MoSe₂ superior electrochemical catalytic activity with a 109 mV over-potential at 10 mA cm⁻² and 204 mV over-potential at 100 mA cm⁻², an appropriate Tafel slope of 90 mV dec⁻¹, and remarkable long-term stability during 20 h of testing for the hydrogen evolution reaction in an alkaline medium. Density-functional calculations reveal the absorption energy of water and Gibbs free-energy of intermediate adsorb hydrogen of Co_xSe/MoSe₂ is more favorable for hydrogen evolution reaction than single component catalyst. Both experimental and theoretical calculation results reveal that synergistic effect can efficiently reduce energy barrier of both the initial water adsorption step and subsequent H₂ generation on binary catalysts, and improve catalytic activity.     

Bimetallic metal-organic framework derived electrocatalyst for efficient overall water splitting

The development of bifunctional catalysts that can be applied to both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is widely regarded as a key factor in the production of sustainable hydrogen fuel by electrochemical water splitting. In this work, we present a high-performance electrocatalyst based on nickel-cobalt metal-organic frameworks for overall water splitting. The as-obtained catalyst shows low overpotential to reaches the current density of 10 mA cm⁻² with 249 mV for OER and 143 mV for HER in alkaline media, respectively. More importantly, when the electrolyzer was assembled with the as-prepared catalyst as anode and cathode simultaneously, it demonstrates excellent activity just applies a potential of 1.68 V to achieve 10 mA cm⁻² current density for overall water splitting.     

Interface engineering of crystalline/amorphous Pt/TeOx nanocapsules for efficient alkaline hydrogen evolution

Hydrogen evolution reaction (HER) is an important process in electrochemical energy technology, and efficient electrocatalysts are of great significance for renewable and sustainable energy conversion. Here, we report a facile hydrothermal and heat treatment process to synthesize a series of Pt-based nanocapsules (NCs) as an effective hydrogen evolution catalyst. The Pt/TeO_x NCs exhibit excellent HER activity in an alkaline medium. The Pt/TeO_x NCs only need the overpotential of 33 mV to achieve the current density of 10 mA cm⁻², and the Tafel slope was as low as 29 mV dec⁻¹, which was even better than that of commercial Pt/C. Detailed experimental characterizations demonstrate that the interface between the crystalline Pt/amorphous TeO_x and the strong electron transfer contribute to alkaline HER activity. This work opens up a new direction for the preparation of efficient catalysts for electrocatalytic reactions or other conversion filed.     

Co0.85Se on three-dimensional hierarchical porous graphene-like carbon for highly effective oxygen evolution reaction

Designing an efficient, cheap and abundant catalyst for oxygen evolution reaction (OER) is crucial for the development of sustainable energy sources. A novel catalyst which could be a promising candidate for such electrocatalysts is described. Co_0.85Se supported on three-dimensional hierarchical porous graphene-like carbon (HPG) exhibits outstanding catalytic performances for OER in alkaline medium. It is found that the onset overpotential is 311 mV on the Co_0.85Se/HPG electrode, which is more 28 and 41 mV negative than that on the Co/HPG and Co₃O₄/HPG electrodes. What's more, the value of Tafel slope is 61.7 mV dec⁻¹ and the overpotential at the current density of 10 mA cm⁻² is 385 mV on this electrode. The Co_0.85Se/HPG of this work is an appealing electrocatalyst for OER in basic electrolyte.     

Three-dimensional ZnCo/MoS2–Co3S4/NF heterostructure supported on nickel foam as highly efficient catalyst for hydrogen evolution reaction

Exploring inexpensive and earth-abundant electrocatalysts for hydrogen evolution reactions is crucial in electrochemical sustainable chemistry field. In this work, a high-efficiency and inexpensive non-noble metal catalysts as alternatives to hydrogen evolution reaction (HER) was designed by one-step hydrothermal and two-step electrodeposition method. The as-prepared catalyst is composed of the synergistic MoS₂–Co₃S₄ layer decorated by ZnCo layered double hydroxides (ZnCo-LDH), which forms a multi-layer heterostructure (ZnCo/MoS₂–Co₃S₄/NF). The synthesized ZnCo/MoS₂–Co₃S₄/NF exhibits a small overpotential of 31 mV and a low Tafel plot of 53.13 mV dec^?1 at a current density of 10 mA cm^?2, which is close to the HER performance of the overpotential (26 mV) of Pt/C/NF. The synthesized ZnCo/MoS₂–Co₃S₄/NF also has good stability in alkaline solution. The excellent electrochemical performance of ZnCo/MoS₂–Co₃S₄/NF electrode originates from its abundant active sites and good electronic conductivity brought by the multilayer heterostructure. This work provides a simple and feasible way to design alkaline HER electrocatalysts by growing heterostructures on macroscopic substrates.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

CoO/NF nanowires promote hydrogen and oxygen production for overall water splitting in alkaline media

The exploration of catalysts with high activity and low cost for water splitting is still necessary. Herein, a nanowire-like morphology CoO/NF electrode is synthesized using facile hydrothermal reaction and calcination treatment. The urea can regulate its morphology during the synthetic process of CoO/NF. Electrochemical studies reveal that the as-obtained CoO/NF exhibits excellent electrocatalytic performance with overpotential of 307 mV at current density of 10 mA cm⁻² and Tafel slope of 72 mV dec⁻¹ for oxygen evolution reaction, and CoO/NF delivers current density of 10 mA cm⁻² at overpotential of 224 mV for hydrogen evolution reaction. The results of the oxygen evolution reaction stability show that the overpotential of CoO/NF electrode is only increased by 4 mV at current density of 10 mA cm⁻². The two-electrode water splitting with CoO/NF electrodes as both anode and cathode needs a cell potential of 1.76 V to reach 10 mA cm⁻². Therefore, this simple method to prepare CoO/NF electrode can enhance the properties of electrocatalysts, which makes CoO/NF a promising material to replace noble metal-based catalysts.     

Mesoporous nickel-sulfide/nickel/N-doped carbon as HER and OER bifunctional electrocatalyst for water electrolysis

The development of non-precious metal-based highly active bi-functional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is critical factor for making water electrolysis a viable process for large-scale industrial applications. In this study, bi-functional water splitting electrocatalysts in the form of nickel-sulfide/nickel nanoparticles integrated into a three-dimensional N-doped porous carbon matrix, are prepared using NaCl as a porous structure-forming template. Microstructures of the catalytic materials are characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and N₂ adsorption-desorption analysis. The most active catalyst synthesized in this study exhibits a low HER overpotential of 70 mV at 10 mA cm⁻² and a low Tafel slope of 45 mV dec⁻¹. In OER, the optimized sample performs better than a state-of-the-art RuO₂ catalyst and produces an overpotential of 337 mV at 10 mA cm⁻², lower than that of RuO₂. The newly obtained materials are also used as HER/OER electrocatalysts in a specially assembled two-electrode water splitting cell. The cell demonstrates high activity and good stability in overall water splitting.     

Ir-doped Co3O4 as efficient electrocatalyst for acidic oxygen evolution reaction

Oxygen evolution reaction (OER) is an important bottleneck for large-scale acidic water splitting applications due to its sluggish reaction kinetics. Therefore, the development of highly active, stable, and inexpensive electrocatalysts for OER remains a challenge. Herein, we develop the iridium doped Co₃O₄ (Ir–Co₃O₄) with low Ir content of 2.88 wt% for efficient acidic OER. Considering systemic characterizations, it is probably concluded that Ir can be uniformly doped into the lattice of Co₃O₄ and induce a certain distortion. The electrochemical results reveal that Ir–Co₃O₄ nanoparticles demonstrate significantly enhanced electrocatalytic OER activity and stability in 0.5 M H₂SO₄ solution compared with pure Co₃O₄, in which the overpotential at the current density of 10 mA cm⁻² decreases from 382 mV to 225 mV and the value of Tafel slope decreases from 101.7 mV dec⁻¹ to 64.1 mV dec⁻¹. Besides, Ir–Co₃O₄ exhibits excellent electrocatalytic durability for continuous 130 h's test without any activity attenuation. Moreover, this work provides a kind of high-performance acidic OER electrocatalyst for the development of hydrogen energy.     

Fe-doped NiCo2S4 catalyst derived from ZIF – 67 towards efficient hydrogen evolution reaction

The development of economical, efficient and stable non-noble metal catalysts plays a key role in electrocatalytic hydrogen evolution. NiCo₂S₄ has been proved to be an efficient non-noble catalyst, to further improve its electrocatalytic performance is a meaningful work. In this paper, the effects of Fe doping on electrochemical performance of NiCo₂S₄ is investigated. The Fe-doped NiCo₂S₄ catalyst is prepared by a facile solvothermal method with metal-organic-framework (MOF, ZIF-67) as template, and it exhibits an improved hydrogen evolution reaction (HER) performance with an overpotential of 181 mV at 10 mA cm^?2, a Tafel slope of 125 mV dec^?1 compared with that of NiCo₂S₄ (252 mV overpotential and 149 mV dec^?1 Tafel slope). The combination of improved conductivity, mesopores architecture retained with the ZIF-67 template, which result the reduced internal resistance, enhanced charge transportation as well as large electrochemical double-layer capacitance. This work provides an effective and synergistic strategy for fabricating NiCo₂S₄-based catalysts toward electrochemical water splitting.     

Template-free synthesis of biomass-derived hierarchically mesoporous carbon with ultra-small FeNi nanoparticles for oxygen evolution reaction

Highly active and stable catalysts towards electrochemical oxygen evolution reaction are crucial for efficient water splitting and sustainable hydrogen generation. Here we report a carbon supported FeNi catalyst synthesized from an in situ freeze-drying method (fd-FeNi/C) with a commonly seen biomass, jasminum mesnyi flower. The fd-FeNi/C exhibits a N-doped hierarchically mesoporous carbon structure decorated with small FeNi nanoparticles with a small diameter of ∼ 4 nm. Electrochemical measurements show excellent catalytic performance in 1 M KOH solution with an overpotential of 301 mV at the current density of 10 mA cm⁻². The value is 41 mV lower than that of the commercial IrO₂/C. A small Tafel slope (64.5 mV dec⁻¹) and high stability are also recorded. This work provides a facile, scalable, and template-free approach to convert biomass into highly active electrochemical catalysts, which shows great potential for future applications.     

3D self-standing grass-like cobalt phosphide vesicles-decorated nanocones grown on Ni-foam as an efficient electrocatalyst for hydrogen evolution reaction

The growing hydrogen consumption has greatly promoted the development of efficient, stable and low-cost electrocatalysts for the hydrogen evolution reaction (HER). Constructing functional nanostructures is an efficacious strategy to optimize catalytic performance. Herein, we present a feasible route to fabricate distinctive 3D grass-like cobalt phosphide nanocones clad with mini-vesicles on the hierarchically porous Ni foam, which can directly serve as a binder-free electrocatalyst with superior catalytic activity and durability in HER. Thanks to its distinctive 3D microstructure featured with favourable pore-size distribution, abundant active sites provided by mini-vesicles and rapid electron transfer with the assistance of Ni foam, the as-grown grass-like CoP/NF electrocatalyst has shown a favourable overpotential in an acidic solution with an onset overpotential of ∼35 mV, an overpotential of 71 mV at a current density of 10 mA cm⁻², reduced by 60 mV in comparison with that realized by urchin-like CoP/NF nanoprickles. Moreover, it has exhibited an excellent HER activity in the alkaline medium, with an overpotential of 117 mV at 10 mA cm⁻², a Tafel slope of 63.0 mV dec⁻¹ and a long-term electrochemical durability.     

Redox active MoO3-Polyaniline hybrid composite for hydrogen evolution reaction and supercapacitor application

A simple oxidative polymerization approach has been used to synthesize MoO₃/PANI hybrid composite for energy conversion and storage application. In this carbon-free energy conversion process, as-developed electrocatalyst (MoO₃/PANI hybrid composite) has significantly improved the molecular hydrogen generation via electro-reduction of protons. The hydrogen evolution kinetics parameters, overpotential at 10 mA cm⁻² is ∼110 mV and Tafel slope 132 mV/dec have been obtained for the as-developed catalyst which suggests the reaction is controlled by Volmer-limited reaction step. Further the as-developed material has been tested for energy storage application and exhibited specific capacitance of 680 F. g⁻¹.     

Electro-synthesis of tungsten carbide containing catalysts in molten salt for efficiently electrolytic hydrogen generation assisted by urea oxidation

Energy-efficient production of hydrogen through urea electrolysis is still challenging due to the lack of satisfactory catalysts for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in urea containing solution. In this study, Ni–W_xC/C (x = 1,2) composite with high activity for urea electrocatalysis was prepared by direct electro-reduction of affordable feedstock of NiO–CaWO₄–C in molten CaCl₂–NaCl at 873–973 K. The addition of graphite in precursor decreases the particle size of Ni. Introducing W_xC into Ni particles can reduce the overpotential for UOR. As a result, the obtained Ni-W_xC/graphite composite exhibits high current density for urea oxidation, which is about 11-folds and 52-folds higher than that of Ni/graphite and Ni (@1.53 V vs. RHE), respectively. After changing the carbon source from graphite to CNTs, the anodic current density was further increased by 43%, reaching 50.31 mA cm^?2. Moreover, the cathodic catalyst W_xC/CNTs obtained by the same preparation process exhibits high performance towards HER, with a low onset potential of 131.5 mV and a Tafel slope of 69.5 mV dec^?1. Assembling an electrolyzer using Ni-W_xC/CNTs as anode and W_xC/CNTs as cathode can yield a current density of 10 mA cm^?2 at merely 1.65 V in 1 M KOH/0.33 M urea aqueous solution, with excellent long-term electrochemical durability. The environmental-friendly production process uses affordable feedstocks for the synthesis of efficient catalysts toward urea electrolysis, promising an energy-saving hydrogen production as well as waste treatment.