Thermogravimetric analysis of coking during dry reforming of methane

Nickel-based catalysts used for dry reforming of methane (DRM) suffer from coking and sintering, which hinders the broad application of the process in the industry. Thermogravimetric analysis was employed to investigate coking on a commercial nickel catalyst with an anti-coking additive (CaO). It was found that the catalyst sintered at temperatures between 850 and 900 °C, which resulted in permanent catalyst deactivation. For the tested Ni/CaO–Al₂O₃ catalyst, the coking and carbon gasification rates are equal at the temperatures of 796–860 °C, depending on the heating rate (5–20 K/min). Significant differences in the temperatures related to the maxima on TG curves for various heating rates follow from DRM kinetics. This work reveals that the coking rate is lower at higher temperatures. After 50 min, the weight gains amount to about 20% and 40% at 800 °C and 600 °C, respectively. Lower sample weight gains were observed at higher temperatures for a methane decomposition reaction over the Ni/CaO catalyst, unlike for the second tested catalyst – activated carbon. For the nickel catalyst, the reaction order for methane decomposition is 0.6 in the temperature range 640–800 °C, while the sign of the activation energy changes at 700 °C. The elaborated kinetic equation predicts the initial CH₄ decomposition rate with 15% accuracy.     

Hydrogen production by catalytic methane decomposition over yttria doped nickel based catalysts

Catalytic methane decomposition can become a green process for hydrogen production. In the present study, yttria doped nickel based catalysts were investigated for catalytic thermal decomposition of methane. All catalysts were prepared by sol-gel citrate method and structurally characterized with X-ray powder diffraction (XRD), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and Brunauer, Emmet and Teller (BET) surface analysis techniques. Activity tests of synthesized catalysts were performed in a tubular reactor at 500 ml/min total flow rate and in a temperature range between 390 °C and 845 °C. In the non-catalytic reaction, decomposition of methane did not start until 880 °C was reached. In the presence of the catalyst with higher nickel content, methane conversion of 14% was achieved at the temperature of 500 °C. Increasing the reaction temperature led to higher coke formation. Lower nickel content in the catalyst reduced the carbon formation. Consequently, with this type of catalyst methane conversion of 50% has been realized at the temperature of 800 °C.     

Hydrogen production enhancement using hot gas cleaning system combined with prepared Ni-based catalyst in biomass gasification

This paper investigates the hot gas temperature effect on enhancing hydrogen generation and minimizing tar yield using zeolite and prepared Ni-based catalysts in rice straw gasification. Results obtained from this work have shown that increasing hot gas temperature and applying catalysts can enhance energy yield efficiency. When zeolite catalyst and hot gas temperature were adjusted from 250 °C to 400 °C, H₂ and CO increased slightly from 7.31% to 14.57%–8.03% and 17.34%, respectively. The tar removal efficiency varies in the 70%–90% range. When the zeolite was replaced with prepared Ni-based catalysts and hot gas cleaning (HGC) operated at 250 °C, H₂ contents were significantly increased from 6.63% to 12.24% resulting in decreasing the hydrocarbon (tar), and methane content. This implied that NiO could promote the water-gas shift reaction and CH₄ reforming reaction. Under other conditions in which the hot gas temperature was 400 °C, deactivated effects on prepared Ni-based catalyst were observed for inhibiting syngas and tar reduction in the HGC system. The prepared Ni-based catalyst worked at 250 °C demonstrate higher stability, catalyst activity, and less coke decomposition in dry reforming. In summary, the optimum catalytic performance in syngas production and tar elimination was achieved when the catalytic temperature was 250 °C in the presence of prepared Ni-based catalysts, producing 5.92 MJ/kg of lower heating value (LHV) and 73.9% tar removal efficiency.     

Kinetics of ethanol steam reforming over Ni/Olivine catalyst

Olivine, a natural mineral consisting of different metal oxides (mainly Mg, Si and Fe oxides) was used as a support for nickel catalyst used in steam reforming of ethanol. Catalyst containing different wt% of Ni on olivine were prepared by conventional wet-impregnation method and characterized by BET, XRD, SEM (coupled with EDS) and H₂-TPR. The reaction was carried out in a tubular fixed bed reactor. Among all the catalysts, 5% Ni on olivine catalyst gave highest hydrogen yield as well as ethanol conversion through ethanol steam reforming reaction. The catalyst activity was analyzed by varying three important process parameters (temperature, ethanol to water molar ratio and space-time). The reaction was performed in the temperature range of 450 °C to 550 °C with 1:6 to 1:12 M feed ratio of ethanol to water at a space-time range 7.21–15.87 kg cat h/kmol ethanol. A maximum yield of 4.62 mol of hydrogen per mole of ethanol reacted was obtained at 550 °C with ethanol to steam molar ratio of 1:10 and space-time of 7.94 kg cat h/kmol ethanol with the ethanol conversion level of 97%. CHNS analysis of the spent catalyst was performed to find the coke deposited over the catalyst surface during the reaction. The power law and LHHW type kinetic models were developed. The power law model predicts the activation energy as 29.07 kJ/mol, whereas the LHHW type model gives the activation energy as 27.4 kJ/mol.     

Mixed and ground KBr-impregnated calcined snail shell and kaolin as solid base catalysts for biodiesel production

Mixed and ground activated snail shell and kaolin catalysts impregnated with KBr were investigated. The snail shell and kaolin were calcined, mixed, and ground prior to immersion with KBr solution and subsequent activation at 500 °C for 3 h. The precursor and catalysts were characterized by thermal gravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller surface area. The catalytic performance of the prepared catalysts was evaluated by transesterification of soybean oil with methanol. The effects of various parameters on biodiesel yield were investigated. A biodiesel yield of 98.5% was achieved using the catalyst prepared by 40% KBr-immersed, mixed, and ground snail shell and kaolin, which were activated at 500 °C. The transesterification conditions were as follows: reaction temperature, 65 °C; reaction time, 2 h; methanol-to-soybean oil molar ratio, 6:1; and catalyst amount (relative to the weight of soybean oil), 2.0 wt%. The solid catalyst could be reused for four times, and biodiesel yield remained over 73.6% for the fourth time.     

Low-temperature catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over ceria-magnesia mixed oxide supported nickel catalysts

Running dry reforming of methane (DRM) reaction at low-temperature is highly regarded to increase thermal efficiency. However, the process requires a robust catalyst that has a strong ability to activate both CH₄ and CO₂ as well as strong resistance against deactivation at the reaction conditions. Thus, this paper examines the prospect of DRM reaction at low temperature (400–600 °C) over CeO₂–MgO supported Nickel (Ni/CeO₂–MgO) catalysts. The catalysts were synthesized and characterized by XRD, N₂ adsorption/desorption, FE-SEM, H₂-TPR, and TPD-CO₂ methods. The results revealed that Ni/CeO₂–MgO catalysts possess suitable BET specific surface, pore volume, reducibility and basic sites, typical of heterogeneous catalysts required for DRM reaction. Remarkably, the activity of the catalysts at lower temperature reaction indicates the workability of the catalysts to activate both CH₄ and CO₂ at 400 °C. Increasing Ni loading and reaction temperature has gradually increased CH₄ conversion. 20 wt% Ni/CeO₂–MgO catalyst, CH₄ conversion reached 17% at 400 °C while at 900 °C it was 97.6% with considerable stability during the time on stream. Whereas, CO₂ conversions were 18.4% and 98.9% at 400 °C and 900 °C, respectively. Additionally, a higher CO₂ conversion was obtained over the catalysts with 15 wt% Ni content when the temperature was higher than 600 °C. This is because of the balance between a high number of Ni active sites and high basicity. The characterization of the used catalyst by TGA, FE-SEM and Raman Spectroscopy confirmed the presence of amorphous carbon at lower temperature reaction and carbon nanotubes at higher temperature.     

Synthesis of fatty acid methyl esters via the methanolysis of palm oil over Ca3.5xZr0.5yAlxO3 mixed oxide catalyst

Novel mixed metal oxide catalyst Ca_3.5xZr_0.5yAl_xO₃ was synthesized through the coprecipitation of metal hydroxides. The textural, morphological, and surface properties of the synthesized catalysts were characterized via Brunauer–Emmett–Teller method, X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and energy-dispersive X-ray spectroscopy. The catalytic performance of the as-synthesized catalyst series was evaluated during the transesterification of cooking palm oil with methanol to produce fatty acid methyl esters (FAME). The influence of different parameters, including the calcination temperature (300–700 °C), methanol to oil molar ratio (6:1–25:1), catalyst amount (0.5–6.5 wt%), reaction time (0.5–12 h) and temperature (70–180 °C), on the process was thoroughly investigated. The metal oxide composite catalyst with a Ca:Zr ratio of 7:1 showed good catalytic activity toward methyl esters. Over 87% of FAME content was obtained when the methanol to oil molar ratio was 12:1, reaction temperature 150 °C, reaction time 5 h and 2.5 wt% of catalyst loading. The catalyst could also be reused for over four cycles.     

Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: Optimization by Taguchi method

The present work illustrates the parametric effects on biodiesel production from Hevea brasiliensis oil (HBO) using flamboyant pods derived carbonaceous heterogeneous catalyst. Activated carbon (AC) was prepared maintaining 500 °C for 1 h and steam activated at optimised values of activation time 1.5 h and temperature 350 °C. Carbonaceous support was impregnated with KOH at different AC/KOH ratios. The transesterification process was optimized and significant parameters affecting the biodiesel yield was identified by Taguchi method considering four parameters viz. reaction time, reaction temperature, methanol to oil ratio and catalyst loading. The physicochemical properties of Hevea brasiliensis methyl ester (HBME) were examined experimentally at optimised condition and found to meet the global American standards for testing and materials (ASTM). The optimum condition observed to yield 89.81% of biodiesel were: reaction time 60 min, reaction temperature 55 °C, catalyst loading 3.5wt% and methanol to oil ratio 15:1. Contribution factor revealed that among four parameters considered, catalyst loading and methanol to oil ratio have more prominent effect on biodiesel yield. The cost for preparing carbonaceous catalyst support was estimated and observed to be fairly impressive. Thus, Hevea brasiliensis oil (HBO) could be considered as suitable feedstock and flamboyant pods derived carbon as effective catalyst for production of biodiesel.     

Optimization of biodiesel production from waste fish oil

The present study deals with the production of biodiesel using waste fish oil. The research assesses the effect of the transesterification parameters on the biodiesel yield and its properties, including temperature (40–60 °C), molar ratio methanol to oil (3:1–9:1) and reaction time (30–90 min). The experimental results were fitted to complete quadratic models and optimized by response surface methodology. All the biodiesel samples presented a FAME content higher than 93 wt.% with a maximum, 95.39 wt.%, at 60 °C, 9:1 of methanol to oil ratio and 90 min. On the other hand, a maximum biodiesel yield was found at the same methanol to oil ratio and reaction time conditions but at lower temperature, 40 °C, which reduced the saponification of triglycerides by the alkaline catalyst employed. Adequate values of kinematic viscosity (measured at 30 °C) were obtained, with a minimum of 6.30 mm²/s obtained at 60 °C, 5.15:1 of methanol to oil ratio and 55.52 min. However, the oxidative stability of the biodiesels produced must be further improved by adding antioxidants because low values of IP, below 2.22 h, were obtained. Finally, satisfactory values of completion of melt onset temperature, ranging from 3.31 °C to 3.83 °C, were measured.     

Turning glycerol surplus into renewable syngas through glycerol steam reforming over a sol-gel Ni–Mo2C-Al2O3 catalyst

In this work, a sol-gel Ni–Mo₂C–Al₂O₃ catalyst is employed for the first time in the glycerol steam reforming for syngas production. Catalyst stability and activity are investigated in the temperature range of 550 °C–700 °C and time on stream up to 30 h. As reaction temperature increases, from 550 °C to 700 °C, H₂ yield boosts from 22% to 60%. The stability test, carried out at milder conditions (600 °C and Gas-Hourly Space-Velocity (GHSV) of 50,000 mL h⁻¹.g_cat⁻¹), shows high catalyst stability, up to 30 h, with final conversion, H₂ yield, and H₂/CO ratio of 95%, 53% and 1.95, respectively. Both virgin and spent catalysts have been characterized by a multitude of techniques, e.g., Atomic-Absorption spectroscopy, Raman spectroscopy, N₂-adsorption-desorption, and Transmission Electron Microscopy (TEM), among others. Regarding the spent catalysts, carbon deposits’ morphology becomes more graphitic as the reaction temperature increases, and the total coke formation is mitigated by increasing reaction temperature and lowering GHSV.     

Comprehensive experimental study on supercritical water gasification of oilfield sludge: Effect of operation parameters,and catalysts on the products

Supercritical water gasification (SCWG) was adopted to treat oilfield sludge and produce syngas. The effect of temperature (400–450 °C), reaction time (30–90 min) and catalyst addition on syngas production and residual products during SCWG of oilfield sludge was studied. When increasing SCWG temperature from 400 to 450 °C with reaction time of 60 min, the H₂ yield and the selectivity of H₂ increased significantly from 0.53 mol/kg and 75.53% to 0.98 mol/kg and 78.09%, respectively. It is noteworthy that when the reaction time was too long, CO₂ and CO were converted to CH₄ with the consumption of H₂ via methanation reaction. The addition of Ni/Al₂O₃ catalyst can substantially promote the production of high-quality syngas from SCWG of oilfield sludge. The H₂ yield and its selectivity at 450 °C and 60 min were as high as 1.37 mol/kg and 84.05% with 10Ni/Al catalyst. Moreover, the catalysts with bimetal loading (Fe–Ni, Rb–Ni or Ce–Ni) were found to be beneficial for improving gasification efficiency, H₂ yield, and the degradation of organic compounds. Among them, 5 wt% Rb on 10Ni/Al catalyst performed the best catalytic activity for SCWG at 450 °C and 60 min, which had the highest H₂ yield of 1.67 mol/kg and selectivity of 86.09%. More than 90% of total organic carbon in sludge was decomposed after the SCWG with all the catalysts. These findings indicated that catalytic SCWG is a promising alternative for efficiently dealing with oilfield sludge.     

Optimisation of sepiolite clay with phosphoric acid treatment as support material for CoB catalyst and application to produce hydrogen from the NaBH4 hydrolysis

Herein, the CoB catalyst supported on the sepiolite clay treated with phosphoric acid was utilized to produce hydrogen from the NaBH₄ hydrolysis. In order to analyse the performance of the phosphoric acid treated sepiolite clay supported-CoB catalyst, the NaBH₄ concentration effect, phosphoric acid concentration effect, phosphoric acid impregnation time effect, CoB catalyst percentage effect, and temperature effect were studied. In addition, XRD, XPS, SEM, TEM, BET, and FTIR analysis were performed for characterization of Co–B catalyst supported on the acid-treated sepiolite. The completion time of this hydrolysis reaction with Co–B (20%) catalyst supported on the sepiolite treated by 5 M phosphoric acid was approximately 80 min, whereas the completion time of this hydrolysis reaction with acid-free sepiolite-supported Co–B (20%) catalyst was approximately 260 min. There is a five-fold increase in the maximum production rate. The maximum hydrogen production rates of this hydrolysis reaction at 30 and 60 °C were found as 1486 and 5025 ml min⁻¹g⁻¹_catalyst, respectively. Activation energy was found as 21.4 kJ/mol. This result indicates that the acid treatment on sepiolite is quite successful. The re-usability of NaBH₄ hydrolysis reaction by CoB catalyst supported on sepiolite treated phosphoric acid for successive five cycles of NaBH₄ at 30 °C was investigated.     

Biodiesel production from refined sunflower vegetable oil over KOH/ZSM5 catalysts

ZSM5 zeolite was impregnated with different KOH loadings (15 wt.%, 25 wt.% and 35 wt.%) to prepare a series of KOH/ZSM5 catalysts. The catalysts were calcined at 500 °C for 3 h and then characterized by N₂ adsorption–desorption and X-ray diffraction (XRD) techniques. The catalysts were tested in the transesterification reaction in a batch reactor at 60 °C and under atmospheric pressure. It was found that KOH/ZSM5 with 35 wt.% loading showed the best catalytic performance. The best reaction conditions in the presence of KOH/ZSM5 (35 wt.%) were determined while modifying the catalyst to oil ratio and the reaction time. The highest methyl ester yield (>95%) was obtained for a reaction time of 24 h, a catalyst to oil ratio of 18 wt.%, and a methanol to oil molar ratio of 12:1. The properties of produced biodiesel complied with the ASTM specifications. The catalytic stability test showed that 35KOH/ZSM5 was stable for 3 consecutive runs. Characterization of the spent catalyst indicated that a slight deactivation might be due to the leaching of potassium oxides active sites.     

Hydrogen-rich syngas production by catalytic cracking of tar in wastewater under supercritical condition

This paper presents the results from experimental study of syngas production by catalytic cracking of tar in wastewater under supercritical condition. Ni/Al₂O₃ catalysts were prepared via the ultrasonic assisted incipient wetness impregnation on activated alumina, and calcined at 600 °C for 4 h. All catalysts showed mesoporous structure with specific surface area in a range of 146.6–215.3 m²/g. The effect of Ni loading (5–30 wt%), reaction temperature (400–500 °C), and tar concentration (0.5–7 wt%) were systematically investigated. The overall reaction efficiency and the gas yields, especially for H₂, were significantly enhanced with an addition of Ni/Al₂O₃ catalysts. With 20%Ni/Al₂O₃, the H₂ yield increased by 146% compared to the non-catalytic experiment. It is noteworthy that the reaction at 450 °C with the addition of 20%Ni/Al₂O₃ had a comparable efficiency to the reaction without catalyst at 500 °C. The maximum H₂ yield of 46.8 mol/kg_tar was achieved with 20%Ni/Al₂O₃ at 500 °C and 0.5 wt% tar concentration. The catalytic performance of the catalysts gradually decreased as the reuse cycle increased, and could be recovered to 88% of the fresh catalyst after regeneration. 20%Ni/Al₂O₃ has a potential to improve H₂ production, as well as a good reusability. Thus, it is considered a promising catalyst for energy conversion of tar in wastewater.     

Effects of catalyst preparation route and promoters (Ce and Zr) on catalytic activity of CuZn/CNTs catalysts for hydrogen production from methanol steam reforming

Ce or Zr promoted CuZn/CNTs (carbon nanotubes) catalysts were synthesized by microwave-assisted polyol, co-precipitation and impregnation methods and were used to generate hydrogen by methanol steam reforming (MSR) process. The physico-chemical properties of the prepared catalysts were analyzed by BET, XRD, FT-IR, TEM, FE-SEM, EDX-dot mapping and H₂-TPR methods. The effect of various operating parameters on methanol conversion and selectivity of gaseous products was investigated. The results indicated that the addition of 2 wt% CeO₂ promoter on CuZn/CNTs catalyst synthesized by impregnation route (CuZn/CNTs (Imp)) increased its methanol conversion from 81.3 to 85.2%, and decreased its CO selectivity from 6.2 to 3.8% at 300 °C, WHSV of 7.5 h^?1 and S/C molar ratio of 2. In addition, the CeCuZn/CNTs catalyst prepared via the microwave-assisted polyol route (CeCuZn/CNTs (Pol)) exhibited the best catalytic activity with 98.2% hydrogen selectivity, 2.6% CO selectivity and 94.2% methanol conversion at 300 °C. Furthermore, a 48 h continuous MSR reaction at 300 °C, identified CeCuZn/CNTs (Pol) as the most stable catalyst due to its higher metal particle dispersion and better interaction between the active phase and the CNTs support.     

Hydrothermal liquefaction of macroalgae: Influence of zeolites based catalyst on products

Hydrothermal liquefaction (HTL) of Ulva prolifera macroalgae (UP) was carried out in the presence of three zeolites based catalysts (ZSM-5, Y-Zeolite and Mordenite) with the different weight percentage (10–20 wt%) at 260–300 °C for 15–45 min. A comparison between non-catalytic and catalytic behavior of ZSM-5, Y-Zeolite, and Mordenite in the conversion of Ulva prolifera showed that is affected by properties of zeolites. Maximum bio-oil yield for non-catalytic liquefaction was 16.6 wt% at 280 °C for 15 min. The bio-oil yield increased to 29.3 wt% with ZSM-5 catalyst (15.0 wt%) at 280 °C. The chemical components and functional groups present in the bio-oils are identified by GC-MS, FT-IR, ¹H-NMR, and elemental analysis techniques. Higher heating value (HHV) of bio-oil (32.2–34.8 MJ/kg) obtained when catalyst was used compared to the non-catalytic reaction (21.2 MJ/kg). The higher de-oxygenation occurred in the case of ZSM-5 catalytic liquefaction reaction compared to the other catalyst such as Y-zeolite and mordenite. The maximum percentage of the aromatic proton was observed in bio-oil of ZSM-5 (29.7%) catalyzed reaction and minimum (1.4%) was observed in the non-catalyst reaction bio-oil. The use of zeolites catalyst during the liquefaction, the oxygen content in the bio-oil reduced to 17.7%. Aqueous phase analysis exposed that presence of valuables nutrients.     

Copper zinc oxide nanocatalysts grown on cordierite substrate for hydrogen production using methanol steam reforming

Hydrogen production from methanol rather than the traditional source, methane, is considered to be advantageous in ease of transportation and storage. However, the current copper-based catalysts utilized in methanol steam reforming are associated with challenges of sintering at high temperature and production of CO which could poison fuel cells. In addressing these challenges, ZnO nanorods were grown hydrothermally on the surface of cordierite and impregnated with Cu to produce catalysts for methanol steam reforming. The catalysts were characterized using SEM, XRD, FTIR, XPS, BET and Raman Spectroscopy. A fixed-bed reactor was used for testing the catalysts while the reaction products were characterized using a GC fitted with FID and TCD. The effects of temperature, methanol concentration and particle size of catalysts on methanol steam reforming were investigated. The experiments were carried out between 180 and 350 °C. CO selectivity of 0% was observed for temperatures between 180 and 230 °C for 0.8 MeOH:1H₂O with an average H₂ selectivity of 98% for that temperature range. XPS showed that the catalyst was relatively unchanged after reaction while Raman spectroscopy revealed coke formation on the catalyst surface for reactions carried out above 300 °C. This shows that the catalyst is active and selective for the reaction.     

Catalytic pyrolysis of sweet sorghum bagasse in the presence of two acid catalysts

Sweet sorghum bagasse was pyrolyzed in the presence of two catalysts, ZSM-5 (a widely known commercial zeolite) and HY-340 (a relatively unexplored acid catalyst). The vapors originating from the thermal decomposition were examined by Py-GC/MS in the biomass/catalyst mass ratios of (1:1), (1:2), (1:5) and (1:10) at 450 °C, 550 °C and 650 °C. In the tests without catalysts, the production of both olefins and aromatics increased in response to increasing reaction temperature. In the catalytic pyrolysis in the presence of ZSM-5, the formation of aromatics increased significantly and the formation of oxygenated decreased in response to increasing amounts of catalyst at all the temperatures studied. The highest concentration of aromatics was obtained in the tests at 450 °C with a bagasse/ZSM-5 ratio of (1:10). In the tests with niobic acid, the formation of furans increased with the addition of HY-340 at ratios of (1:1) and (1:2), and the formation of oxygenated decreased in response to the increase in biomass/catalyst ratio at all temperatures mentioned. Area percentages of approximately 54% of olefins were obtained in the assays at bagasse/HY-340 ratios of (1:2) and (1:5) at 650 °C.     

Production of crude bio-oil via direct liquefaction of spent K-Cups

Spent K-Cups were liquefied into crude bio-oil in a water-ethanol co-solvent mixture and reaction conditions were optimized using response surface methodology (RSM) with a central composite design (CCD). The effects of three independent variables on the yield of crude bio-oil were examined, including the reaction temperature (varied from 255 °C to 350 °C), reaction time (varied from 0 min to 25 min) and solvent/feedstock mass ratio (varied from 2:1 to 12:1). The optimum reaction conditions identified were 276 °C, 3 min, and solvent/feedstock mass ratio of 11:1, giving a mass fraction yield of crude bio-oil of 60.0%. The overall carbon recovery at the optimum conditions was 93% in mass fraction. The effects of catalyst addition (NaOH and H₂SO₄) on the yield of crude bio-oil were also investigated under the optimized reaction conditions. The results revealed that the presence of NaOH promoted the decomposition of feedstock and significantly enhanced the bio-oil production and liquefaction efficiency, whereas the addition of H₂SO₄ resulted in a negative impact on the liquefaction process, decreasing the yield of crude bio-oil.     

Ni supported on the CaO modified attapulgite as catalysts for hydrogen production from glycerol steam reforming

The Ni catalyst supported on CaO-modified attapulgite (CaO-ATP) were synthesized by wet impregnation method at a constant Ni metal loading (10 wt%). The catalyst was tested by carrying out a glycerin steam reforming reaction under the following conditions: 400–800 °C, W/G is 3, GHSV is 1 h⁻¹. Ni–CaO-ATP exhibited the highest hydrogen yield (85.30%) and glycerol conversion (93.71%) at 600 °C. The catalysts were characterized by N₂ adsorption/desorption, BET, XRD, H₂-TPR, TG and SEM. The results show that ATP has good resistance to carbon deposition. As an attapulgite modifier of Ni–CaO-ATP, CaO promotes the dispersion of the active component nickel species, which would promote the water gas shift reaction, leading to the improving of hydrogen yield. In addition, the addition of Ca would further enhance the inhibition of carbon deposition and prolong the life of the Ni–CaO-ATP catalyst.