High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Volume‐Enhanced Raman Scattering Detection of Viruses

Virus detection and analysis are of critical importance in biological fields and medicine. Surface‐enhanced Raman scattering (SERS) has shown great promise in small molecule and even single molecule detection, and can provide fingerprint signals of molecules. Despite the powerful detection capabilities of SERS, the size discrepancy between the SERS “hot spots” (generally, <10 nm) and viruses (usually, sub‐100 nm) yields poor detection reliability of viruses. Inspired by the concept of molecular imprinting, a volume‐enhanced Raman scattering (VERS) substrate composed of hollow nanocones at the bottom of microbowls (HNCMB) is developed. The hollow nanocones of the resulting VERS substrates serve a twofold purpose: 1) extending the region of Raman signal enhancement from the nanocone surface (e.g., surface “hot spots”) to the hollow area within the cone (e.g., volume “hot spots”)—a novel method of Raman signal enhancement, and 2) directing analyte such as viruses of a wide range of sizes to those VERS “hot spots” while simultaneously increasing the surface area contributing to SERS. Using HNCMB VERS substrates, greatly improved Raman signals of single viruses are demonstrated, an achievement with important implications in disease diagnostics and monitoring, biomedical fields, as well as in clinical treatment.     

Controlled Assembly of Highly Raman‐Enhancing Silver Nanocap Arrays Templated by Porous Anodic Alumina Membranes

A convenient nanoscale technique is reported for the fabrication of highly ordered hemispherical silver nanocap arrays templated by porous anodic alumina (PAA) membranes as robust and cost‐efficient surface‐enhanced Raman scattering (SERS) substrates. This geometry produces a high Raman signal due to its periodic hexagonal arrangements and control of the gap between the nanostructures in the sub‐10‐nm regime. The surface structure can be tuned further to optimize the enhancement factor according to optional PAA fabrication and silver deposition parameters. Finite‐difference time‐domain calculations indicate that the structure may possess excellent SERS characteristics due to the high density and abundance of hot spots.     

Tape‐Imprinted Hierarchical Lotus Seedpod‐Like Arrays for Extraordinary Surface‐Enhanced Raman Spectroscopy

A novel two‐side‐activatable high‐performance surface‐enhanced Raman spectroscopy (SERS) substrate is developed based on the tape‐imprinting method. It features 3D full‐space‐distributed hot spots originating from the hierarchical lotus seedpod‐like silver arrays, which offer ultrasensitive, uniform, reproducible, and reliable quantitative measurements with an inherent internal standard. This excellent SERS substrate also holds great promise in practical in situ molecule detection on curved surfaces, such as pesticides on fruit, which is not yet possible with the traditional rigid or flexible material‐based SERS counterparts.     

Ultrabroadband Metasurface for Efficient Light Trapping and Localization: A Universal Surface‐Enhanced Raman Spectroscopy Substrate for “All” Excitation Wavelengths

Most reported surface‐enhanced Raman spectroscopy (SERS) substrates can work for individual excitation wavelengths only. Therefore, different substrates have to be used for different excitation wavelengths, which consumes more biological/chemical materials, substrates, and measurement time. Here, an ultrabroadband super absorbing metasurface that can work as a universal substrate for low cost and high performance SERS sensing is reported. Due to broadband light trapping and localized field enhancement, this structure can work for almost “all” available laser lines from 450 to 1100 nm. This predicted feature is validated by SERS experiment using five different excitation laser lines, obtaining a high enhancement factor of 5.3 × 10⁷ and very good uniformity over large areas.     

In Situ Two‐Step Photoreduced SERS Materials for On‐Chip Single‐Molecule Spectroscopy with High Reproducibility

A method is developed to synthesize surface‐enhanced Raman scattering (SERS) materials capable of single‐molecule detection, integrated with a microfluidic system. Using a focused laser, silver nanoparticle aggregates as SERS monitors are fabricated in a microfluidic channel through photochemical reduction. After washing out the monitor, the aggregates are irradiated again by the same laser. This key step leads to full reduction of the residual reactants, which generates numerous small silver nanoparticles on the former nanoaggregates. Consequently, the enhancement ability of the SERS monitor is greatly boosted due to the emergence of new “hot spots.” At the same time, the influence of the notorious “memory effect” in microfluidics is substantially suppressed due to the depletion of surface residues. Taking these advantages, two‐step photoreduced SERS materials are able to detect different types of molecules with the concentration down to 10^?13m . Based on a well‐accepted bianalyte approach, it is proved that the detection limit reaches the single‐molecule level. From a practical point of view, the detection reproducibility at different probing concentrations is also investigated. It is found that the effective single‐molecule SERS measurements can be raised up to ≈50%. This microfluidic SERS with high reproducibility and ultrasensitivity will find promising applications in on‐chip single‐molecule spectroscopy.     

Wafer‐Scale Double‐Layer Stacked Au/Al2O3@Au Nanosphere Structure with Tunable Nanospacing for Surface‐Enhanced Raman Scattering

Fabricating perfect plasmonic nanostructures has been a major challenge in surface enhanced Raman scattering (SERS) research. Here, a double‐layer stacked Au/Al₂O₃@Au nanosphere structures is designed on the silicon wafer to bring high density, high intensity “hot spots” effect. A simply reproducible high‐throughput approach is shown to fabricate feasibly this plasmonic nanostructures by rapid thermal annealing (RTA) and atomic layer deposition process (ALD). The double‐layer stacked Au nanospheres construct a three‐dimensional plasmonic nanostructure with tunable nanospacing and high‐density nanojunctions between adjacent Au nanospheres by ultrathin Al₂O₃ isolation layer, producing highly strong plasmonic coupling so that the electromagnetic near‐field is greatly enhanced to obtain a highly uniform increase of SERS with an enhancement factor (EF) of over 10⁷. Both heterogeneous nanosphere group (Au/Al₂O₃@Ag) and pyramid‐shaped arrays structure substrate can help to increase the SERS signals further, with a EF of nearly 10⁹. These wafer‐scale, high density homo/hetero‐metal‐nanosphere arrays with tunable nanojunction between adjacent shell‐isolated nanospheres have significant implications for ultrasensitive Raman detection, molecular electronics, and nanophotonics.     

Bright Surface‐Enhanced Raman Scattering with Fluorescence Quenching from Silica Encapsulated J‐Aggregate Coated Gold Nanoparticles

Plexitonic nanoparticles offer variable optical properties through tunable excitations, in addition to electric field enhancements that far exceed molecular resonators. This study demonstrates a way to design an ultrabright surface‐enhanced Raman spectroscopy (SERS) signal while simultaneously quenching the fluorescence background through silica encapsulation of the semiconductor–metal composite nanoparticles. Using a multistep approach, a J‐aggregate‐forming organic dye is assembled on the surface of gold nanoparticles using a cationic linker. Excitonic resonance of the J‐aggregate–metal system shows an enhanced SERS signal at an appropriate excitation wavelength. Further encapsulation of the decorated particles in silica shows a significant reduction in the fluorescence signal of the Raman spectra (5× reduction) and an increase in Raman scattering (7× enhancement) when compared to phospholipid encapsulation. This reduction in fluorescence is important for maximizing the useful SERS enhancement from the particle, which shows a signal increase on the order of 10⁴ times greater than J‐aggregated dye in solution and 24 times greater than Oxonica S421 SERS tag. The silica layer also serves to promote colloidal stability. The combination of reduced fluorescence background, enhanced SERS intensity, and temporal stability makes these particles highly distinguishable with potential to enable high‐throughput applications such as SERS flow cytometry.     

Precision Synthesis: Designing Hot Spots over Hot Spots via Selective Gold Deposition on Silver Octahedra Edges

A major challenge in plasmonic hot spot fabrication is to efficiently increase the hot spot volumes on single metal nanoparticles to generate stronger signals in plasmon‐enhanced applications. Here, the synthesis of designer nanoparticles, where plasmonic‐active Au nanodots are selectively deposited onto the edge/tip hot spot regions of Ag nanoparticles, is demonstrated using a two‐step seed‐mediated precision synthesis approach. Such a “hot spots over hot spots” strategy leads to an efficient enhancement of the plasmonic hot spot volumes on single Ag nanoparticles. Through cathodoluminescence hyperspectral imaging of these selective edge gold‐deposited Ag octahedron (SEGSO), the increase in the areas and emission intensities of hot spots on Ag octahedra are directly visualized after Au deposition. Single‐particle surface‐enhanced Raman scattering (SERS) measurements demonstrate 10‐fold and 3‐fold larger SERS enhancement factors of the SEGSO as compared to pure Ag octahedra and non‐selective gold‐deposited Ag octahedra (NSEGSO), respectively. The experimental results corroborate well with theoretical simulations, where the local electromagnetic field enhancement of our SEGSO particles is 15‐fold and 1.3‐fold stronger than pure Ag octahedra and facet‐deposited particles, respectively. The growth mechanisms of such designer nanoparticles are also discussed together with a demonstration of the versatility of this synthetic protocol.     

Sensitive and Reproducible Immunoassay of Multiple Mycotoxins Using Surface‐Enhanced Raman Scattering Mapping on 3D Plasmonic Nanopillar Arrays

A surface‐enhanced Raman scattering‐based mapping technique is reported for the highly sensitive and reproducible analysis of multiple mycotoxins. Raman images of three mycotoxins, ochratoxin A (OTA), fumonisin B (FUMB), and aflatoxin B1 (AFB1) are obtained by rapidly scanning the surface‐enhanced Raman scattering (SERS) nanotags‐anchoring mycotoxins captured on a nanopillar plasmonic substrate. In this system, the decreased gap distance between nanopillars by their leaning effects as well as the multiple hot spots between SERS nanotags and nanopillars greatly enhances the coupling of local plasmonic fields. This strong enhancement effect makes it possible to perform a highly sensitive detection of multiple mycotoxins. In addition, the high uniformity of the densely packed nanopillar substrate minimizes the spot‐to‐spot fluctuations of the Raman peak intensity in the scanned area when Raman mapping is performed. Consequently, this makes it possible to gain a highly reproducible quantitative analysis of mycotoxins. The limit of detections (LODs) are determined to be 5.09, 5.11, and 6.07 pg mL^?1 for OTA, FUMB, and AFB1, and these values are approximately two orders of magnitude more sensitive than those determined by the enzyme‐linked immunosorbent assays. It is believed that this SERS‐based mapping technique provides a facile tool for the sensitive and reproducible quantification of various biotarget molecules.     

Cover Picture: Metal–Silica Hybrid Nanostructures for Surface‐Enhanced Raman Spectroscopy (Adv. Mater. 21/2006)

The image shows an ordered array of silver‐tipped silica nanorods, which serve as a substrate for surface enhanced Raman spectroscopy (SERS). Signal intensities from test molecules in regions of aggregated pillars (indicated by the green laser beam) were enhanced by factors of 10 to 20 compared to arrays of separated pillars, as reported by Moskovits and co‐workers on p. 2829. This hybrid structure maximizes SERS signal intensities from analytes while minimizing the quantities needed for detection due to the precise formation of “hot regions” at the intersection of the silver tips.     

In situ growth of silver nanoparticles in porous membranes for surface-enhanced raman scattering

We demonstrate the in situ growth of silver nanoparticles in porous alumina membranes (PAMs) for use as a surface-enhanced Raman scattering (SERS) detection substrate. This fabrication method is simple, cost-effective, and fast, while providing control over the size of silver nanoparticles through the entire length of the cylindrical nanopores with uniform particle density inside the pores unachievable by the traditional infiltration technique. The in situ growth of silver nanoparticles was conducted from electroless-deposited nanoscale seeds on the interior of the PAM and resulted in the formation of numerous hot spots, which facilitated significantly higher SERS enhancement for these substrates compared with previously reported porous substrates.     

Hierarchical Electrohydrodynamic Structures for Surface‐Enhanced Raman Scattering

Surface enhanced Raman scattering (SERS) is a well‐established spectroscopic technique that requires nanoscale metal structures to achieve high signal sensitivity. While most SERS substrates are manufactured by conventional lithographic methods, the development of a cost‐effective approach to create nanostructured surfaces is a much sought‐after goal in the SERS community. Here, a method is established to create controlled, self‐organized, hierarchical nanostructures using electrohydrodynamic (HEHD) instabilities. The created structures are readily fine‐tuned, which is an important requirement for optimizing SERS to obtain the highest enhancements. HEHD pattern formation enables the fabrication of multiscale 3D structured arrays as SERS‐active platforms. Importantly, each of the HEHD‐patterned individual structural units yield a considerable SERS enhancement. This enables each single unit to function as an isolated sensor. Each of the formed structures can be effectively tuned and tailored to provide high SERS enhancement, while arising from different HEHD morphologies. The HEHD fabrication of sub‐micrometer architectures is straightforward and robust, providing an elegant route for high‐throughput biological and chemical sensing.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.     

High‐Performance SERS Substrate Based on Hierarchical 3D Cu Nanocrystals with Efficient Morphology Control

Cu nanocrystals of various shapes are synthesized via a universal, eco‐friendly, and facile colloidal method on Al substrates using hexadecylamine (HDA) as a capping agent and glucose as a reductant. By tuning the concentration of the capping agent, hierarchical 3D Cu nanocrystals show pronounced surface‐enhanced Raman scattering (SERS) through the concentrated hot spots at the sharp tips and gaps due to the unique 3D structure and the resulting plasmonic couplings. Intriguingly, 3D sword‐shaped Cu crystals have the highest enhancement factor (EF) because of their relatively uniform size distribution and alignment. This work opens new pathways for efficiently realizing morphology control for Cu nanocrystals as highly efficient SERS platforms.     

Self-assembly nanoparticle based tripetaloid structure arrays as surface-enhanced Raman scattering substrates

This paper reports a novel highly ordered tripetaloid structure array (TPSA) which performs very well as an active surface-enhanced Raman scattering (SERS) substrate. The TPSA is easily fabricated by anisotropic etching of a self-assembly silica-nanoparticle bilayer and a subsequent metal deposition step, with notable uniformity and reproducibility. Electromagnetic simulation indicates that the narrow inter-gaps and edge protrusions in the TPSA act as hot spots. In addition, the peak electromagnetic field intensity in the inter-gaps changes slightly and periodically as the polarization of the incident light varies from 0°?to 360°. SERS experiments show that the SERS enhancement factor (EF) of a Au-film-covered TPSA is 12 times higher than that of regular Au-film-over-nanoparticles, and not sensitive to the polarization of the incident light. The spatially averaged EF of the TPSA is as high as 5.7?×?10(6), and the local EF of its hot spots is much higher.     

Multifunctional Silver‐Embedded Magnetic Nanoparticles as SERS Nanoprobes and Their Applications

In this study, surface‐enhanced Raman spectroscopy (SERS)‐encoded magnetic nanoparticles (NPs) are prepared and utilized as a multifunctional tagging material for cancer‐cell targeting and separation. First, silver‐embedded magnetic NPs are prepared, composed of an 18‐nm magnetic core and a 16‐nm‐thick silica shell with silver NPs formed on the surface. After simple aromatic compounds are adsorbed on the silver‐embedded magnetic NPs, they are coated with silica to provide them with chemical and physical stability. The resulting silica‐encapsulated magnetic NPs (M‐SERS dots) produce strong SERS signals and have magnetic properties. In a model application as a tagging material, the M‐SERS dots are successfully utilized for targeting breast‐cancer cells (SKBR3) and floating leukemia cells (SP2/O). The targeted cancer cells can be easily separated from the untargeted cells using an external magnetic field. The separated targeted cancer cells exhibit a Raman signal originating from the M‐SERS dots. This system proves to be an efficient tool for separating targeted cells. Additionally, the magnetic‐field‐induced hot spots, which can provide a 1000‐times‐stronger SERS intensity due to aggregation of the NPs, are studied.     

EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable,Inkjet‐Printed,Thin‐Film Electronics

Coating inkjet‐printed traces of silver nanoparticle (AgNP) ink with a thin layer of eutectic gallium indium (EGaIn) increases the electrical conductivity by six‐orders of magnitude and significantly improves tolerance to tensile strain. This enhancement is achieved through a room‐temperature “sintering” process in which the liquid‐phase EGaIn alloy binds the AgNP particles (≈100 nm diameter) to form a continuous conductive trace. Ultrathin and hydrographically transferrable electronics are produced by printing traces with a composition of AgNP‐Ga‐In on a 5 µm‐thick temporary tattoo paper. The printed circuit is flexible enough to remain functional when deformed and can support strains above 80% with modest electromechanical coupling (gauge factor ≈1). These mechanically robust thin‐film circuits are well suited for transfer to highly curved and nondevelopable 3D surfaces as well as skin and other soft deformable substrates. In contrast to other stretchable tattoo‐like electronics, the low‐cost processing steps introduced here eliminate the need for cleanroom fabrication and instead requires only a commercial desktop printer. Most significantly, it enables functionalities like “electronic tattoos” and 3D hydrographic transfer that have not been previously reported with EGaIn or EGaIn‐based biphasic electronics.     

Pen‐on‐Paper Approach Toward the Design of Universal Surface Enhanced Raman Scattering Substrates

The translation of a technology from the laboratory into the real world should meet the demand of economic viability and operational simplicity. Inspired by recent advances in conductive ink pens for electronic devices on paper, we present a “pen‐on‐paper” approach for making surface enhanced Raman scattering (SERS) substrates. Through this approach, no professional training is required to create SERS arrays on paper using an ordinary fountain pen filled with plasmonic inks comprising metal nanoparticles of arbitrary shape and size. We demonstrate the use of plasmonic inks made of gold nanospheres, silver nanospheres and gold nanorods, to write SERS arrays that can be used with various excitation wavelengths. The strong SERS activity of these features allowed us to reach detection limits down to 10 attomoles of dye molecules in a sample volume of 10 μL, depending on the excitation wavelength, dye molecule and type of nanoparticles. Furthermore, such simple substrates were applied to pesticide detection down to 20 ppb. This universal approach offers portable, cost effective fabrication of efficient SERS substrates at the point of care. This approach should bring SERS closer to the real world through ink cartridges to be fixed to a pen to create plasmonic sensors at will.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.