New aramid‐based nanocomposites: Synthesis and characterization

New type of nanocomposites containing various proportions of montmorillonite in aromatic polyamide was prepared via solution intercalation method. Aramid chains were synthesized by reacting 4,4′‐oxydianiline with isophthaloyl chloride in N,N′‐dimethyl acetamide. Dodecylamine was used as swelling agent to change the hydrophilic nature of montmorillonite into organophilic. Appropriate amounts of organoclay were mixed in the polymer solution using high‐speed mixer for complete dispersion of the clay. Thin films cast from these materials after evaporating the solvent were characterized by XRD, TEM, mechanical, thermal, and water absorption measurements. The structure and morphology of the nanocomposites determined by XRD and TEM revealed the formation of exfoliated and intercalated clay platelets in the aramid matrix. Mechanical data indicated improvement in the tensile strength and modulus of the nanocomposites with clay loading up to 6 wt%. The glass transition temperature increased up to 12 wt% clay content and thermal stability amplified with increasing clay loading. The water absorption reduced gradually as a function of organoclay and approached to zero with 20 wt% organoclay in the aramid. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Synthesis and Characterization of Aromatic–Aliphatic Polyamide Nanocomposite Films Incorporating a Thermally Stable Organoclay

Nanocomposites were synthesized from reactive thermally stable montmorillonite and aromatic–aliphatic polyamide obtained from 4-aminophenyl sulfone and sebacoyl chloride. Carbonyl chloride terminal chain ends were generated using 1% extra sebacoyl chloride that could interact chemically with the organoclay. The distribution of clay in the nanocomposites was investigated by XRD, SEM, and TEM. Mechanical and thermal properties of these materials were monitored using tensile testing, TGA, and DSC. The results revealed delaminated and intercalated nanostructures leading to improved tensile strength and modulus up to 6 wt% addition of organoclay. The elongation at break and toughness of the nanocomposites decreased with increasing clay contents. The nanocomposites were thermally stable in the range 400–450 °C. The glass transition temperature increased relative to the neat polyamide due to the interfacial interactions between the two phases. Water uptake of the hybrids decreased upon the addition of organoclay depicting reduced permeability.     

Photopolymerization and characteristics of reactive organoclay–polyurethane nanocomposites

Polymerizable ammonium surfactants with two methacrylate alkyl chains were successfully synthesized via Michael‐Addition and quaternization reaction. Organoclays containing reactive methacrylate groups were prepared by cationic exchange process. Intercalated nanocomposites have been produced by UV initiated polymerization with different organophilic clay loading. X‐ray diffraction (XRD) spectroscopy showed that the d spacing of organoclay increased with increment of methacrylate alkyl chains length. When organoclay were dispersed in urethane acrylate resin, and photopolymerized, the d spacing increased, but the increasing extent decreased with increment of the methacrylate alky chains length. Thermogravimetric analysis indicated that incorporation of reactive organoclay had better thermal stablity than cetyltrimethylammonium bromide (CTMA)‐modified organoclay and dynamic mechanical analysis (DMA) showed nanocomposites containing reactive organoclay had high glass transition temperature and storage modulus. Tensile analysis implied that incorporation of reactive organoclay could enhance mechanical and tensile properties dramatically. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Clay-reinforced semi-aromatic polyether-amide nanocomposites containing phosphine oxide moieties: synthesis and characterization

Semi-aromatic flame retardant polyether-amide/organoclay nanocomposites were synthesis through solution blending technique. Surface modification of the montmorillonite clay was performed with 1,4-bis[4,4′-amino phenoxy]butane for ample compatibilization with the polyamide matrix. The polymer chains were produced from the poly condensation reaction of bis(3-amino phenyl)phenyl phosphine oxide (4) with 1,4-(4-carboxy phenoxy)butane (3). The effect of clay dispersion and the interaction between clay and polyamide chains on the properties of nanocomposites were investigated using X-ray diffraction, scanning electron microscopy, limited oxygen index, differential scanning calorimetry, thermogravimetric analysis, and water uptake measurements. The diacid 3 as a monomer was prepared from the reaction of 4-hydroxy benzoic acid (1) with 1,4-dibromo butane (2) in the presence of NaOH solution.     

The effect of organoclay on the mechanical properties and morphology of injection‐molded polyamide 6/polypropylene nanocomposites

Nanocomposites containing a thermoplastic blend and organophilic layered clay (organoclay) were produced by melt compounding. The blend composition was kept constant [polyamide 6 (PA6) 70 wt % + polypropylene (PP) 30 wt %], whereas the organoclay content was varied between 0 and 10 wt %. The mechanical properties of the nanocomposites were determined on injection‐molded specimens in both tensile and flexural loading. Highest strength values were observed at an organoclay content of 4 wt % for the blends. The flexural strength was superior to the tensile one, which was traced to the effect of the molding‐induced skin‐core structure. Increasing organoclay amount resulted in severe material embrittlement reflected in a drop of both strength and strain values. The morphology of the nanocomposites was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersion X‐ray analysis (EDX), and X‐ray diffraction (XRD). It was established that the organoclay is well dispersed (exfoliated) and preferentially embedded in the PA6 phase. Further, the exfoliation degree of the organoclay decreased with increasing organoclay content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 175–189, 2004     

Use of purified and modified bentonites in linear low‐density polyethylene/organoclay/compatibilizer nanocomposites

Polyethylene‐based ternary nanocomposites were prepared with different clay structures, obtained by the modification of purified Resadiye bentonite as the reinforcement, a random terpolymer of ethylene, butyl acrylate, and maleic anhydride with the trade name Lotader3210 as the compatibilizer, and linear low‐density polyethylene (LLDPE) as the polymer matrix in an intensive batch mixer. The quaternary ammonium/phosphonium salts used for the modification of bentonite were dimethyldioctadecyl ammonium (DMDA) chloride (Cl), tetrakisdecyl ammonium (TKA) bromide (Br), and tributylhexadecyl phosphonium (TBHP) Br. The effects of the physical properties and structure of the organoclay on the clay dispersion were studied at different clay contents (2 and 5 wt %) and at a compatibilizer/organoclay ratio of 2.5. The extent of organoclay dispersion was determined by X‐ray diffraction (XRD) and was verified by transmission electron microscopy (TEM), mechanical testing, and rheological analysis. XRD analysis showed that the nanocomposite with the organoclay DMDA contained intercalated silicate layers, as also verified by TEM. The TEM analysis of the nanocomposites with TBHP exhibited intercalated/partially exfoliated clay dispersion. TKA, with a crowded alkyl environment, sheltered and hindered the intercalation of polymer chains through the silicate layers. In comparison to pure LLDPE, nanocomposites with a 33–41% higher Young's modulus, 16–9% higher tensile strength, and 75–144% higher elongation at break were produced with DMDA and TBHP, respectively (at 5 wt % organoclay). The storage modulus increased by 807–1393%, and the dynamic viscosity increased by 196–339% with respect to pure LLDPE at low frequencies for the samples with DMDA and TBHP (at 5 wt % organoclay). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Toughening and brittle‐tough transition in polyamide 12‐organoclay/maleated styrene‐ethylene‐co‐butylene‐styrene nanocomposites

Tough nanocomposites based on polyamide 12 (PA12) can be obtained by the addition of a maleated rubber to a highly dispersed PA12‐clay nanocomposite by melt processing. The nanostructure behavior was evaluated by X‐ray diffraction and transmission electron microscopy. The results showed that the organoclay was highly dispersed and mostly located in the PA12 matrix due to the larger affinity between the polyamide and the clay, but some of the organoclay was also present in the polymer/polymer interface. The presence of organoclay slightly increased the dispersed particle size, indicating decreased compatibilization. This was attributed to a partial shielding of maleic anhydride compatibilizer by surfactant. The addition of the elastomer considerably improved the toughness of the PA12‐based nanocomposites, maintaining its stiffness; i.e., the nanocomposites with 25% rubber content showed an increase of 25‐fold of notched impact strength of the PA12 matrix, meanwhile ductility and stiffness remained constant. This allowed us to obtain toughened PA12 PNs throughout a large range of strain rate and a modulus similar to that of the unmodified PA12. The position of the brittle/tough transition in terms of rubber content, determined by the standard notched Izod test (25% mSEBS) is basically the same as that determined by the essential work of fracture procedure. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Effects of swelling agents on the crystallization behavior and mechanical properties of polyamide 6/clay nanocomposites

Montomorillonite was organically modified with three different swelling agents: n‐dodecylamine, 12‐aminolauric acid, and 1,12‐diaminodecane. These organoclays and polyamide 6 (PA6) were blended in a formic acid solution. X‐ray diffraction analysis showed that the clay still retained its layer structure in the PA6/clay nanocomposite. Consequently, these materials were intercalated nanocomposites. The effects of the swelling agent and organoclay content on the crystallization behavior of the PA6/clay nanocomposites were studied with differential scanning calorimetry. The results showed that the position and width of the exothermic peak of the PA6/clay nanocomposites were changed during the nonisothermal crystallization process. The clay behaved as a nucleating agent and enhanced the crystallization rate of PA6.The crystallinity of PA6 decreased with an increasing clay content. Different swelling agents also affected the crystallization behavior of PA6. The effects of the type and content of the swelling agent on the tensile and flexural properties of PA6/clay nanocomposites were also investigated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1686–1693, 2003     

Preparation and characterization of poly(butylene terephthalate) nanocomposites with various organoclays

Layered‐silicate‐based polymer–clay nanocomposite materials were prepared depending on the surface modification of montmorillonite (MMT). Nanocomposites consisting of poly(butylene terephthalate) (PBT) as a matrix and dispersed inorganic clay modified with cetyl pyridinium chloride (CPC), benzyl dimethyl N‐hexadecyl ammonium chloride, and hexadecyl trimethyl ammonium bromide by direct melt intercalation were studied. The organoclay loading was varied from 1 to 5 wt %. The organoclays were characterized with X‐ray diffraction (XRD) to compute the crystallographic spacing and with thermogravimetric analysis to study the thermal stability. Detailed investigations of the mechanical and thermal properties as well as a dispersion study by XRD of the PBT/clay nanocomposites were conducted. X‐ray scattering showed that the layers of organoclay were intercalated with intercalating agents. According to the results of a differential scanning calorimetry analysis, clay acted as a nucleating agent, affecting the crystallization. The PBT nanocomposites containing clay treated with CPC showed good mechanical properties because of intercalation into the polymer matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of nylon 6/organoclay nanocomposite filament fibers

A series of nylon 6 (NY6)/organoclay nanocomposites were prepared via in situ polymerization of ε‐caprolactam in the presence of 1,2‐aminododecanoic acid‐intercalated montmorillonite (ADA‐MMT) organoclay (1–5 wt%) using 6‐aminocaproic acid as polymerization catalyst. The extent of organoclay dispersion in NY6 matrix was analyzed using WAXD and SEM measurements. DSC studies revealed marginal shift in melting and melt‐crystallization peaks toward lower temperature with increasing clay content. Melt viscosity studies for NY6/ADA‐MMT exhibited higher shear‐thinning behavior than neat NY6 probably due to the slip between NY6 matrix and exfoliated organoclay platelets during shear flow. The prepared nanocomposites were melt‐spun and studied for their property improvements against varying clay content, draw ratios, and annealing conditions. Birefringence and sonic velocity values increased initially at lower draw ratios (≤2.5) due to increased orientation of molecular chains along the drawing direction but saturated at higher draw ratio (3.0) for all the samples. At the same draw ratio; compared to neat NY6, NY6/organoclay fibers showed increased chain orientation along the drawing direction which can be attributed to the “tethering effect” of organoclay on NY6 matrix. The initial modulus and stress at break were sensitive to factors such as draw ratio, clay content, and annealing conditions. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis and characterization of a novel covalently functionalized organoclay and its polypropylene nanocomposite

A covalently functionalized organoclay was synthesized successfully through a condensation reaction of SiOH groups on the edge of montmorillonite (MMT) with acryloyl chloride followed by modification with hexadecyltrimethylammonium bromide (CTAB) via an ion‐exchange reaction. Fourier transform infrared confirmed that C?C groups had been grafted to MMT sheets. Wide‐angle X‐ray diffraction measurements showed that CTAB had intercalated into MMT interlayers. The content of bonded acryloyl chloride was 2.42 wt % in the functionalized organoclay according to thermogravimetric analysis. Polypropylene (PP) nanocomposites were prepared by melt mixing. Rheological measurements and morphology observations confirmed that PP nanocomposites containing the organoclay bearing C?C groups exhibited improved interfacial interaction between PP chains and MMT sheets. Thus, the PP nanocomposites showed not only higher storage modulus and complex viscosity values at low frequencies but also enhanced mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nanocomposites of poly(trimethylene terephthalate) with organoclay

Two different kinds of clay were organomodified with cetylpyridinium chloride (CPC) as an intercalation agent. Poly(trimethylene terephthalate) (PTT)/organoclay nanocomposites were prepared by the solution intercalation method. Wide‐angle X‐ray diffraction (WAXD) indicated that the layers of clay were intercalated by CPC and the interlayer spacing was a function of the cationic exchange capacity (CEC) of the clay: the higher the CEC, the larger the interlayer spacing is. The WAXD studies showed that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay. From the results of differential scanning calorimetry analysis it was found that clay behaves as a nucleating agent and enhances the crystallization rate of PTT. The maximum enhancement of the crystallization rate for the nanocomposites was observed in nanocomposites containing about 5 wt % organoclay with a range of 1–15 wt %. The thermal stability of the nanocomposites was enhanced by the addition of 1–10 wt % organoclay as found from thermogravimetric analysis. The thermal stability of the PTT/organoclay nanocomposites was related to the organoclay content and the dispersion in the PTT matrix. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3315–3322, 2003     

Preparation of thermoplastic elastomer nanocomposites based on polyamide‐6/polyepichlorohydrin‐co‐ethylene oxide

This work is aimed at determining the effect of nanoclay and polyepichlorohydrin‐co‐ethylene oxide (ECO) content on the microstructure and mechanical properties of PA6/ECO thermoplastic elastomers (TPEs). TPE nanocomposites were prepared in a laboratory mixer using polyamide 6 (PA6), ECO, and an organoclay by a two‐step melt mixing process. First, the PA6 was melt blended with Cloisite 30B and then mixed by ECO rubber. X‐ray diffraction results and transmission electron microscopy image showed that the nanoclay platelets were nearly exfoliated in both the phases. The SEM photomicrograph of PA6 with ECO showed that the elastomer particles are dispersed throughout the polyamide matrix and the size of rubber particles is less than 3 μm. Introduction of organoclay in the PA6 matrix increased the size of dispersed rubber particles in comparison with the unfilled but otherwise similar blends. The nanoscale dimension of the dispersed clay results in an improvement of the tensile modulus of the nanocomposites. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Polystyrene nanocomposite materials by in situ polymerization into montmorillonite–vinyl monomer interlayers

A different series of new polystyrene–clay nanocomposites have been prepared by grafting polymerization of styrene with vinyl‐montmorillonite (MMT) clay. The synthesis was achieved through two steps. The first step is the modification of clay with the vinyl monomers, such as N,N‐dimethyl‐n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, triphenyl‐4‐vinylbenzyl‐phosphonium chloride, and tri‐n‐butyl‐4‐vinylbenzyl‐phosphonium chloride. The second step is the polymerization of styrene with different ratios of vinyl‐MMT clay. The materials produced were characterized by different physical and chemical methods: (1) IR spectra, confirming the intercalation of the vinyl‐cation within the clay interlayers; (2) thermogravimetric analysis (TGA), showing higher thermal stability for PS–nanocomposites than polystyrene (PS) and higher thermal stability of nanocomposites with of phosphonium moieties than nanocomposites with ammonium moieties; (3) swelling measurements in different organic solvents, showing that the swelling degree in hydrophobic solvents increases as the clay ratio decreases; (4) X‐ray diffraction (XRD), illustrating that the nanocomposites were exfoliated at up to a 25 wt % of organoclay content; and (5) scanning electron microscopy (SEM), showing a complete dispersion of PS into clay galleries. Also, transmission electron microscopy (TEM) showed nanosize spherical particles of ～ 150–400 nm appearing in the images. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3739–3750, 2007     

Synthesis and properties of BCDA‐based polyimide–clay nanocomposites

Bicyclo[2.2.2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride (BCDA)‐based polyimide–clay nanocomposites were prepared from their precursor, namely polyamic acid, by a solution‐casting method. The organoclay was prepared by treating sodium montmorillonite (Kunipia F) clay with dodecyltrimethylammonium bromide at 80 °C. Polyamic acid solutions containing various weight percentages of organoclay were prepared from 4,4′‐(4,4′‐isopropylidenediphenyl‐1,1′‐diyldioxy)‐dianiline and BCDA in N‐methyl‐2‐pyrrolidone containing dispersed particles of organoclay at 20 °C. These solutions were cast on a glass plate using a Doctor's blade and then heated subsequently to obtain nanocomposite films. The nanocomposites were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal mechanical analysis, dynamic mechanical analysis, polarizing microscopy, scanning electron microscopy, transmission electron microscopy, wide‐angle X‐ray diffraction (WAXD) and thermogravimetric analysis. The glass transition temperature of the nanocomposites was found to be higher than that of pristine polymer. The coefficient of thermal expansion of the nanocomposites decreased with increasing organoclay content. WAXD studies indicated that the extent of silicate layer separation in the nanocomposite films depended upon the organoclay content. Tensile strength and modulus of the nanocomposite containing 1% organoclay were significantly higher when compared to pristine polymer and other nanocomposites. The thermal stability of the nanocomposites was found to be higher than that of pristine polymer in air and nitrogen atmosphere. Copyright © 2007 Society of Chemical Industry     

Morphology and mechanical properties of heterophasic PP–EP/EVA/organoclay nanocomposites

The effect of vinyl acetat (VA) on the morphological, thermal stability, and mechanical properties of heterophasic polypropylene–(ethylene‐propylene) copolymer (PP–EP)/poly(ethylene vinyl acetate) (EVA)/organoclay nanocomposites was studied. Tailored organoclay C20A was selected to enhance the exfoliation of the clay platelets. Depending on the VA content, there were two morphological organoclay populations in the systems. Both populations were directly observed by scanning transmission electron microscopy and measured by wide‐angle X‐ray diffraction and small‐angle X‐ray scattering. The content of VA in EVA originated spherical and elongated morphologies in the resultant nanocomposites. High‐VA content led to a better intercalation of the organoclay platelets. Measurement of thermal properties suggested that higher VA decreases thermal stability in samples both with and without organoclay, although nanocomposites had higher thermal stability than samples without clay. The storage modulus increased both with nanoclay and VA content. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Diffusion behavior of water and sulfuric acid in epoxy/organoclay nanocomposites

The research on polymer‐layered silicate nanocomposites is currently an expanding field of study because they often exhibit a wide range of improved properties over their unmodified starting polymers. Epoxy/organoclay nanocomposites have been prepared by intercalating epoxy into the organoclay montmorillonite. The intercalation and/or exfoliation of the clay within the nanocomposite were monitored using X‐ray diffraction and transmission electron microscopy. Diffusion was studied through epoxy samples containing up to 10 phr of organically treated montmorillonite following the gravity method. The water and sulfuric acid diffusion within the epoxy‐based nanocomposites were evaluated in terms of diffusivity, weight change and penetration depth of the sulfuric acid element S as function of immersion time and immersion temperature. An investigation of the resistance of epoxy nanocomposite to a corrosive environment by immersion into sulfuric acid at elevated temperature was performed. The effect of the degree of exfoliation of the clay on moisture barrier effect and corrosion resistance is specifically studied. The data has been compared to those obtained from the neat epoxy resin to evaluate the diffusion properties of the nanocomposites. It was found that the diffusion of water and that of acid do not obey Fick's law, and that the higher the organoclay content the higher weight change was obtained. The presence of the organoclay enhanced the diffusivity and delayed the penetration of the sulfuric acid. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(ethylene terephthalate) nanocomposites with organoclay

Poly(ethylene terephthalate) (PET)/montmorillonite (MMT) nanocomposites were prepared by solution intercalation method. The clay was organo‐modified with the intercalation agent cetylpyridinium chloride (CPC). Wide‐angle X‐ray diffraction (XRD) showed that the layers of MMT were intercalated by CPC. Four nanocomposites with organoclay contents of 1, 5, 10, and 15 wt % were prepared by solution blending. XRD showed that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay present. According to the results of differential scanning calorimetry (DSC) analysis, clay behaves as a nucleating agent and enhances the crystallization rate of PET. The maximum enhancement of crystallization rate for the nanocomposites was observed in those containing about 10 wt % organoclay within the studied range of 1–15 wt %. From thermogravimetric analysis (TGA), we found that the thermal stability of the nanocomposites was enhanced by the addition of 1–15 wt % organoclay. These nanocomposites showed high levels of dispersion without agglomeration of particles at low organoclay content (5 wt %). An agglomerated structure did form in the PET matrix at 15 wt % organoclay. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 140–145, 2004     

Polyolefin‐based nanocomposite: The effects of processing aids

PP/organoclay nanocomposites were prepared using different processing aids (EMCA and PPG), and their effects on the thermal and mechanical properties were evaluated by WAXD, TEM, SEM, DSC, and mechanical tests. This study helps to clarify the effects of processing aids on the organoclay surface and on the intercalation and exfoliation processes. Nanocomposites with elongated intercalated and partially exfoliated structures were obtained, mainly when C‐15A was used. The results for the mechanical properties showed that the processing aids increased the impact strength significantly (up to three times that of neat PP) but reduced the flexural modulus of PP nanocomposites. PPG, which is polar promoted wetting MMT surface, thus increasing its interlayer distance, mainly for PP/C‐20A nanocomposites. However, it reduced the interfacial adhesion between the clay and the matrix. Nanocomposites impact strength was improved, especially when the C‐15A organoclay was used, while were achieved better results with the C‐20A organoclay when EMCA was used. The larger the amount of processing aid added, the higher the impact strength, but the lower the flexural modulus of the nanocomposites. PPG caused debonding of the clay particles and increased the number of microvoids, generating more mechanisms to aid in the energy dissipation of the systems. EMCA promoted debonding of clay particles with the formation of fibrils, indicating stronger interactions between the clay and matrix. A slight nucleation effect for PP crystallization was observed, mainly when EMCA was used. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

An exfoliated clay‐poly(norbornene) nanocomposite prepared by metal‐mediated surface‐initiated polymerization

An exfoliated clay?polymer nanocomposite was prepared by surface‐initiated ring opening metathesis polymerization (SI‐ROMP) of norbornene on a montmorillonite (MMT) clay with a modified surface. Utilizing the hydrothermal‐silylation reaction between a norbornenyl‐bearing chlorosilane agent and silanol groups of the MMT clay, we were able to bind a metal alkylidene catalyst to the surface in order to grow poly(norbornene) chains directly from the surface using ROMP. Our approach produced nanocomposites having poly(norbornene) chains that are covalently attached to the inorganic substrate, as opposed to most conventional polymer‐clay composites that have ionically tethered chains (via the ammonium‐based modifiers of the organoclay) or physically adsorbed polymers. POLYM. ENG. SCI., 55:2349–2354, 2015. © 2015 Society of Plastics Engineers