Synthesis of PAA-g-PNIPAM well-defined graft polymer by sequential RAFT and SET-LRP and its application in preparing size-controlled super-paramagnetic Fe3O4 nanoparticles as a stabilizer

A series of well-defined double hydrophilic graft copolymers, poly(acrylic acid)-g-poly(N-isopropylacrylamide) (PAA-g-PNIPAM), was employed as a novel water-soluble coating for constructing superparamagnetic iron oxide nanoparticles. The copolymer was synthesized via a three-step procedure: firstly, a well-defined hydrophobic PtBA-based backbone, poly(tert-butyl 2-((2-chloropropanoyloxy)-methyl)acrylate)-co-poly(tert-butyl acrylate), (PtBCPMA₁₉-co-PtBA₁₈), was prepared through RAFT copolymerization of a new trifunctional acrylic monomer, tert-butyl 2-((2-chloropropanoyloxy)methyl)acrylate and tert-butyl acrylate; secondly, taking this backbone as a macroinitiator to initiate SET-LRP of N-isopropylacrylamide resulted in well-defined (poly(tert-butyl 2-((2-chloropropanoyloxy)methyl)-acrylate)-co-poly(tert-butyl acrylate))-g-poly(N-isopropylacrylamide) ((PtBCPMA-co-PtBA)-g-PNIPAM) amphiphilic graft copolymers with relatively narrow polydispersities (M_w/M_n ≤ 1.31); thirdly, handling (PtBCPMA-co-PtBA)-g-PNIPAM in acidic conditions afforded PAA-g-PNIPAM graft copolymers. The resulting PAA-g-PNIPAM copolymers were directly utilized as a polymeric stabilizer in the preparation of superparamagnetic Fe₃O₄ nanoparticles. The particle size can be readily tuned in the range of 12.1–23.2 nm by varying the amount of PAA-g-PNIPAM copolymer or the length of PNIPAM side chain. Besides, the structure and properties of prepared Fe₃O₄/polymer nanocomposites were characterized by XRD, FT-IR, TGA, TEM, and magnetic measurement in detail.     

Amphiphilic cylindrical brushes with poly(acrylic acid) core and poly(n-butyl acrylate) shell and narrow length distribution

Core-shell cylindrical polymer brushes with poly(t-butyl acrylate)-b-poly(n-butyl acrylate) (PtBA-b-PnBA) diblock copolymer side chains were synthesized via ‘grafting from’ technique using atom transfer radical polymerization (ATRP). The formation of well-defined brushes was confirmed by GPC and ¹H NMR. Multi-angle light scattering (MALS) measurements on brushes with 240 arms show that the radius of gyration scales with the degree of polymerization of the side chains with an exponent of 0.57±0.05. The hydrolysis of the PtBA block of the side chains resulted amphiphilic cylindrical core-shell nanoparticles. In order to obtain a narrow length distribution of the brushes, the backbone, poly(2-hydroxyethyl methacrylate), was synthesized by anionic polymerization in addition to ATRP. The characteristic core-shell cylindrical structure of the brush was directly visualized on mica by scanning force microscopy (SFM). Brushes with 1500 block copolymer side chains and a length distribution of l_w/l_n=1.04 at a total length l_n=179 nm were obtained. By choosing the proper solvent in the dip-coating process on mica, the core and the shell can be visualized independently by SFM.     

Synthesis of (ABCB)n type ternary amphiphilic multiblock copolymer via poly(ethylene oxide) macro-chain transfer agent

A novel (ABCB)_n type ternary amphiphilic multiblock copolymer was synthesized by stepwise insertion of monomers into the trithiocarbonate-embedded poly(ethylene oxide) (PEO) macro-chain transfer agent (PEO-CTA)_n. (PEO-CTA)_n was synthesized first by coupling of α,ω-dihydroxyl PEO with dicarboxylic trithiocarbonate, then styrene (St) and t-butyl acrylate (^tBA) were inserted into the (PEO-CTA)_n successively to yield (PEO-b-PS)_n and (PEO-b-PS-b-P^tBA-b-PS)_n, respectively. After hydrolysis of the (PEO-b-PS-b-P^tBA-b-PS)_n, the final product (PEO-b-PS-b-PAA-b-PS)_n was obtained.     

Allyl functionalized telechelic linear polymer and star polymer via RAFT polymerization

Reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene using bisallyl trithiocarbonate as a chain transfer agent (CTA) was studied. The polymerization exhibited first-order kinetics and the molecular weight increased linearly with increase of monomer conversion. Well defined allyl-functionalized telechelic polystyrene (PS), poly(tert-butyl acrylate) (PtBA) and corresponding triblock copolymers, polystyrene-b-poly(n-butyl acrylate)-b-polystyrene (PS-b-PnBA-b-PS) and poly(tert-butyl acrylate)-b-polystyrene-b-poly(tert-butyl acrylate) (PtBA-b-PS-b-PtBA) were prepared as characterized with GPC and NMR analysis. The allyl-end groups of the telechelic PS have been switched to 1,2-dibromopropyl groups quantitatively by bromine addition reaction, further substitution of the bromide with azide was also made. Furthermore, star PS with allyl-end-functionalized arms was synthesized by RAFT polymerization of divinyl benzene using allyl-functionalized PS as a macro-CTA via arm-first approach. Star polymer with a thiol-functionalized core was generated by aminolysis reaction of the star polymer and ethylenediamine. As a result, difunctionalized star polymer with allyl and thiol groups was obtained and was used as a stabilizer for the formation of gold nanoparticles.     

Nitroxide-mediated polymerization to form symmetrical ABA triblock copolymers from a bidirectional alkoxyamine initiator

Bidirectional alkoxyamine 2 was synthesized and used as the initiator in the polymerization of styrene (S), n-butyl acrylate (nBA), t-butyl acrylate (tBA), isoprene (I), and dimethylacrylamide (DMA). A variety of symmetrical ABA triblock copolymers were prepared, ranging in size from 5 to 59 kDa. Kinetics studies and gel permeation chromatography (GPC) confirmed the “living” nature of these polymerizations. Trifluoroacetic acid was used to convert the PtBA blocks of these polymers into poly(acrylic acid) (PAA) blocks, forming ABA amphiphilic triblock copolymers. AFM images of PAA-b-PnBA-b-PAA and PAA-b-PS-b-PAA triblock copolymers ionized by the addition of 2,2′-(ethylenedioxy)bis(ethylamine) show evidence of self-assembly.     

Calorimetric study of block-copolymers of poly(n-butyl acrylate) and gradient poly(n-butyl acrylate-co-methyl methacrylate)

The nanophase separation in diblock and triblock copolymers consisting of immiscible poly(n-butyl acrylate) (block A) and gradient copolymers of methyl methacrylate (MMA) and n-butyl acrylate (nBA) (block M/A) were investigated by means of their heat capacity, C_p, as a function of the composition of the blocks M/A and temperature. In all copolymers studied, both blocks are represented by their C_p and glass transition temperature, T_g, as well as the broadening of the transition-temperature range. The low-temperature transition of the blocks A is always close to that of the pure poly(n-butyl acrylate) and is independent of the analyzed compositions of the block copolymer, but broadened asymmetrically relative to the homopolymer due to the small phase size. The higher transition is related to the glass transition of the copolymer block of composition M/A. Besides the asymmetric broadening of the transition due to the phase separation, it decreases in T_g and broadens, in addition, symmetrically with increasing acrylate content. The concentration gradient is not able to introduce a further phase separation with a third glass transition inside the M/A block.     

pH responsive nanoplates from bulk self-assembly of UV-crosslinkable poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate)

We report the dispersed nanoplates prepared from bulk self-assembly of diblock copolymer poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate) (PtBA-b-PCEMA) with PCEMA as a UV-crosslinkable segment and PtBA as a hydrolysable segment. PtBA-b-P(HEMA-TMS) was synthesized through a two step ATRP and functionalized to PtBA-b-PCEMA. The diblock copolymer with 55.7 % weight ratio of PCEMA bulk was assembled into lamellar morphology and characterized by small-angle X-ray scattering (SAXS). After UV-crosslinking, the dispersed nanoplates were prepared by dispersing the crosslinked bulk self-assembly in a good solvent of the PtBA segment and characterized by transmission electron microscopy (TEM). The dispersed nanoplates have crosslinked PCEMA as the cores and the solubilized PtBA as the coronas. After hydrolysis of the PtBA segment into poly(acrylic acid) (PAA), the crosslinked nanoobjects could be dispersed in water and showed reversible pH-responsibility.     

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) synthesis and properties

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) or P(EXA-r-tBA)-PCEA was synthesized by atom transfer radical polymerization. Reactivity ratios of EXA and tBA for copolymerization were determined. The specific refractive index increments of six diblocks were measured as a function of their composition. The diblocks were thermally stable and formed micelles in an automobile engine oil. Such micelles may be useful as an anti-friction additive in lubricating oils.     

Aqueous lubricating properties of charged (ABC) and neutral (ABA) triblock copolymer chains

Application of charged polymer chains as additives for lubricating neutral surfaces in aqueous environment, especially via polymer physisorption, is generally impeded by the electrostatic repulsion between adjacent polymers on the surface. In this study, we have investigated the adsorption and aqueous lubricating properties of an amphiphilic triblock copolymer, comprised of a neutral poly(ethylene glycol) (PEG) block, a hydrophobic poly(2-methoxyethyl acrylate) (PMEA) block, and a charged poly(methacrylic acid) (PMAA) block, namely PEG-b-PMEA-b-PMAA. After adsorption onto a nonpolar hydrophobic surface from aqueous solution, an equal and homogeneous mixture of neutral PEG and charged PMAA chains is formed on the surface, with an adsorbed polymer mass comparable to its fully neutral counterpart, PEG-b-PMEA-b-PEG. The lubricity of PEG-b-PMEA-b-PMAA showed significant improvement compared to fully charged polymer chains, e.g. poly(acrylic acid)-block-poly(2-methoxyethyl acrylate) (PAA-b-PMEA), which is attributed to dilution of charged moieties on the surface and subsequent improvement of the lubricating film stability.     

Contact Time and Temperature Dependencies of Tack in Polyacrylic Block Copolymer Pressure-Sensitive Adhesives Measured by the Probe Tack Test

The adhesion strength of an adhesive is affected by two factors: the development of interfacial adhesion and the cohesive strength of the adhesive. In order to evaluate the relative contributions of these two factors, the tack of polyacrylic block copolymer-based adhesives was measured using a probe tack test. For this purpose, three model adhesives were prepared: poly(methyl methacrylate)-block-poly(n-butyl acrylate)-block-poly(methyl methacrylate) triblock copolymer (A), a mixture of the triblock and poly(methyl ethacrylate)-block-poly(n-butyl acrylate) diblock copolymer (7/3, w/w) (B), and a mixtureof the triblock and poly(n-butyl acrylate) oligomer (8/2, w/w) (C). The tack measured at room temperature was in the order B ≈ C > A and increased gradually with an increase in the contact time. The temperature dependence of tack showed peak tack values above room temperature, and the peak tack temperature was in the order A > B > C. The storage and loss moduli measured by dynamic mechanical analysis were also in the order A > B > C. The molecular mobility of the poly(n-butyl acrylate) unit in the block copolymer measured by H-pulse NMR was in the order C> B > A. It was concluded from these results that the relative contribution of interfacial adhesion to the tack of the different systems was in the order C > B > A.     

Baroplastic behavior of miscible block copolymer blends

Pressure dependence of various phase transitions for the miscible block copolymer (BCP) blends was evaluated by depolarized light scattering (DPLS) and small-angle neutron scattering (SANS) measurements, in which the blends consist of a polystyrene-b-poly(n-butyl methacrylate) (PS-b-PnBMA) and a deuterated polystyrene-b-poly(n-hexyl methacrylate) (dPS-b-PnHMA). Excellent baroplasticity was observed in nearly symmetric blends of PS-b-PnBMA/dPS-b-PnHMA, leading to the most outstanding pressure coefficients, |dT/dP|, in a closed-loop type phase behavior between a lower disorder-to-order transition (LDOT) and an order-to-disorder transition (ODT) type phase behavior. Together with the estimated pressure coefficients based on the values of enthalpic and volumetric changes at phase transitions, we demonstrate that the entropic compressibility for the miscible BCP blends is a baroplastic indicator, which was characterized by the negative volume change on mixing (ΔV_mix) at transitions.     

Synthesis of Amphiphilic Diblock Copolymers by DPE Method

Amphiphilic diblock copolymers, poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) and polystyrene-b-poly(acrylic acid) (PS-b-PAA), were prepared by 1,1-diphenylethene (DPE) method under mild conditions. Firstly, free radical polymerization of tert-butyl acrylate (tBA) was carried out with AIBN as initiator in the presence of DPE, giving a DPE-containing precursor, PtBA, with controlled molecular weight. Secondly, methyl methacrylate and styrene were polymerized in the presence of PtBA precursor, and PS-b-PtBA and PMMA-b-PtBA diblock copolymers with controlled molecular weights were obtained respectively. Finally, amphiphilic diblock copolymers, PMMA-b-PAA and PS-b-PAA, were prepared by hydrolysis of PS-b-PtBA and PMMA-b-PtBA. The formation of PS-b-PAA and PMMA-b-PAA was confirmed by ¹H NMR. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were used to detect the self-assembly behavior of the amphiphilic diblock polymers in tetrahydrofuran (THF).     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

Synthesis and characterisation of hydroxyl end-capped telechelic polymers with poly(methyl methacrylate)-block-poly(n-butyl acrylate) backbones via atom transfer radical polymerisation

Hydroxyl end-capped telechelic polymers with poly(methyl methacrylate)-block-poly(n-butyl acrylate) (PMMA-b-PBA) backbones have been prepared via atom transfer radical polymerisation (ATRP) together with a nucleophilic substitution reaction. A hydroxyl-functionalised PMMA macroinitiator (HO-PMMA-Br) was prepared via ATRP at the optimised reaction temperature (60 °C) using 2-hydroxyethyl 2-bromoisobutyrate as the initiator. The high functionality of the bromo end group in the macroinitiator was confirmed by both ¹H NMR technique and a chain-extension reaction. Electrospray ionisation mass spectrometer proved to be a valuable tool for characterising PMMAs with a bromo end group (PMMA-Br), which provided signals corresponding to the intact polymers although multiply charged polymer chains were observed. The well-defined block copolymers HO-PMMA-b-PBA-Br were obtained by the ATRP of n-butyl acrylate using HO-PMMA-Br as a macroinitiator in a one-pot reaction at 100 °C. The kinetics as well as the dependence of the M_n,SEC and PDIs of the obtained block copolymers on the conversions of n-butyl acrylate in the chain-extension reaction suggested negligible radical termination during the reaction, demonstrating that the well-defined HO-PMMA-b-PBA-Br with a high functionality of bromo end group were obtained. The nucleophilic substitution reaction of a monohydroxyl-functionalised block copolymer HO-PMMA-b-PBA-Br with 5-amino-1-pentanol in dimethyl sulfoxide at room temperature was verified with ¹H and ¹³C NMR techniques, which resulted in a series of telechelic polymers HO-PMMA-b-PBA-OH with a functionality of hydroxyl groups up to 1.7 according to the gradient polymer elution chromatography.     

Synthesis of versatile TIPNO-based alkoxyamines

The versatile chloromethyl TIPNO-based alkoxyamine was efficiently transformed into other valuable functionalised TIPNO-based alkoxyamines such as amino alkoxyamines which are interesting initiators for block copolymers and bisalkoxyamines in good yield and in two steps at the most. One bisalkoxyamine has allowed to prepare well-defined polystyrene-b-poly(n-butyl acrylate)-b-polystyrene symmetrical triblock copolymer. The last representative example of such alkoxyamines is a styrenic alkoxyamine which was copolymerized with styrene to afford branched polystyrene. Finally, for the first time branched poly(n-butyl acrylate) by nitroxide mediated radical polymerization was obtained and was a efficient macroinitiator of styrene, which indicates that the radical polymerization mediated by this styrenic alkoxyamine is living.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Ultrasonically initiated emulsifier-free emulsion copolymerization of n-butyl acrylate and acrylamide. Part I: Polymerization mechanism

The polymerization mechanism of ultrasonically initiated emulsifier-free emulsion copolymerization of n-butyl acrylate (BA) and acrylamide (AM) was investigated. A four-step polymerization mechanism of the ultrasonically initiated emulsifier-free emulsion was put forward based on the monomer conversion and the main reaction locus. Improving the power output would increase the monomer conversion and the rate of polymerization. However, when the reaction temperature was 30 °C and the concentration of Na₂SO₄ was 0.1%, the monomer conversion and the rate of polymerization achieved maximum. The FTIR spectra showed that the sample obtained by this way was the copolymer of BA and AM, but not the blend of poly(butyl acrylate) and polyacrylamide.     

Impacts of stereoregularity and stereocomplex formation on physicochemical, protein adsorption and cell adhesion behaviors of star-shaped 8-arms poly(ethylene glycol)-poly(lactide) block copolymer films

Biodegradable stereocomplex film exhibiting soft and stretchy character was prepared by simply blending between enantiomeric 8-arms poly(ethylene glycol)-block-poly(l-lactide) (8-arms PEG-b-PLLA) and 8-arms PEG-b-PDLA copolymers with star-shaped structure. The stereocomplex film exhibited higher T_g and PLA crystallinity than those of original copolymer films. Effects of stereoregularity and stereocomplexation on protein adsorption and L929 cells attachment/proliferation behaviors onto the films were analyzed from the viewpoint to design a new class of implantable soft biomaterial. The stereocomplex film was found to exhibit large amount of protein adsorption than original films. Furthermore, cell attachment efficiency and proliferation rate on the film were significantly enhanced by stereocomplexation. This stereocomplex material is expected to be applicable as degradable temporary scaffold for soft tissue regeneration. Consequently, it was indicated that the stereocomplex formation could be proposed to be a novel method to control the protein- and cell-adhesive properties of biodegradable matrix composed of PEG-PLA copolymer.     

Preparation of block-brush PEG-b-P(NIPAM-g-DMAEMA) and its dual stimulus-response

Well-defined dually responsive block-brush copolymer of poly(ethylene glycol)-b-[poly(N-isopropylacrylamide)-g-poly(N,N-dimethylamino-ethylmethacrylate)], [PEG-b-P(NIPAM-g-PDMAEMA)] was successfully prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry based on azide-capped PDMAEMA and alkyne-pending PEG-b-PNIPAM copolymer. Azide-capped PDMAEMA was synthesized through ATRP of DMAEMA monomer using an azide-functionalized initiator of β-azidoethyl-2-bromoisobutyrate. Alkyne-pending PEG-b-PNIPAM copolymer was obtained through ATRP copolymerization of NIPAM with propargyl acrylate. The final block-brush copolymer was synthesized by the click reaction between these two polymer precursors. Because of characteristics of three different blocks, the copolymer exhibited dually thermo- and pH-responsive behavior. The responsive behaviors of block-brush copolymer were studied by laser light scattering, temperature-dependent turbidity measurement and micro differential scanning calorimetry. The phase transition temperature of block-brush copolymer increased with the decrease of pH value. At pH = 5.0, the copolymer displayed weak thermo-responsive behavior and might form uni-molecular micelles upon heating. At higher pH values, the block-brush copolymer aggregated intermolecularly into the micelles during the phase transition.     

Synthesis of linear tetrablock quaterpolymers via atom transfer radical polymerization and a click coupling approach

We report the synthesis of a well-defined linear tetrablock quaterpolymer of poly(butyl acrylate)-b-polystyrene-b-poly(methyl acrylate)-b-poly(methyl methacrylate) by combining atom transfer radical polymerization (ATRP) and a click coupling approach. For this purpose, polystyrene-b-poly(butyl acrylate) (AB) was prepared by ATRP using macroinitiator as α-trimethylsilyl(TMS)-alkyne ω-bromo polystyrene. The α-(TMS) end of the AB diblock copolymer was deprotected using tetrabutylammonium fluoride (TBAF) in THF. The ω-azide end of the CD diblock copolymer was made from poly(methyl methacrylate)-b-poly(methyl acrylate) (CD) via transformation of the bromine chain end by a simple nucleophilic substitution reaction with NaN₃ in DMF. Click coupling between the ω-azide end in CD diblock copolymer with the α-alkyne end in the AB diblock copolymer was then performed by Cu¹-catalyzed (3+2) cycloaddition. Gel permeation chromatography (GPC), FT-IR and ¹H NMR spectroscopy confirmed the successful formation of a linear ABCD tetrablock copolymer via ATRP and click coupling.