The microwave power performance comparisons of Al/sub x/Ga/sub 1-x/As/In/sub 0.15/Ga/sub 0.85/As (x=0.3, 0.5, 0.7, 1.0) doped-channel HFETs

The properties of doped-channel field-effect transistors (DCFET) have been thoroughly investigated on Al/sub x/Ga/sub 1-x/As/InGaAs (x= 0.3, 0.5, 0.7, 1) heterostructures with various Al mole fractions. In this study, we observed that by introducing a 200-/spl Aring/-thick Al/sub 0.5/Ga/sub 0.5/As (x=0.5) Schottky layer can enhance the device power performance, as compared with the conventional x=0.3 AlGaAs composition system. However, a degradation of the device power performance was observed for further increasing the Al mole fractions owing to their high sheet resistance and surface states. Therefore, Al/sub 0.5/Ga/sub 0.5/As Schottky layer design provides a good opportunity to develop a high power device for power amplifier applications.     

Performance improvement in tensile-strained In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As metamorphic HEMT

This paper proposes a In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As (x=0.3-0.5-0.3) metamorphic high-electron mobility transistor with tensile-strained channel. The tensile-strained channel structure exhibits significant improvements in dc and RF characteristics, including extrinsic transconductance, current driving capability, thermal stability, unity-gain cutoff frequency, maximum oscillation frequency, output power, power gain, and power added efficiency.     

Direct optical injection locking of monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As MODFET oscillators

The authors have fabricated monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As 0.25 mu m gate modulation-doped field effect transistor (MODFET) oscillators. The results of direct optical subharmonic injection locking of these oscillator circuits at 10.159 and 19.033 GHz are presented.<>     

Optical tuning of monolithic In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As/InP modulation-doped field-effect transistor oscillators at X and R band

The authors have experimentally studied the optical control and optical tuning characteristics of monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As modulation-doped field-effect transistor (MODFET) oscillators operating in the X and R bands. For a 20 mu W intrinsic photoexcitation on the device, the maximum frequency shift for the X- and R-band oscillators was 8.7 and 11.7 MHz, respectively.<>     

Double heterojunction bipolar transistor in Al/sub x/Ga/sub 1-x/As/GaAs/sub 1-y/Sb/sub y/ system

Double heterojunction bipolar transistors based on the Al/sub x/Ga/sub 1-x/As/GaAs/sub 1-y/Sb/sub y/ system are examined. The base layer consists of narrow band gap GaAs/sub 1-y/Sb/sub y/ and the emitter and collector consist of wider band gap Al/sub x/Ga/sub 1-x/As. Preliminary experimental results show that AlGaAs/GaAsSb/GaAs DHBTs exhibit a current gain of five and a maximum collector current density of 5*10/sup 4/ A/cm/sup 2/.<>     

Effect of strain on microwave noise characteristics in In/sub 0.52/Al/sub 0.48/As/In/sub x/Ga/sub 1-x/As (0.53

Chough  K.B. Hong  W.-P. Florez  L. Song  J.I. 《Electronics letters》1993,29(15):1338-1340

Optimized breakdown probabilities in Al/sub 0.6/Ga/sub 0.4/As-GaAs heterojunction avalanche photodiodes

Recently, it has been shown that the noise characteristics of heterojunction Al/sub 0.6/Ga/sub 0.4/As-GaAs avalanche photodiodes (APDs) can be optimized by proper selection of the width of the Al/sub 0.6/Ga/sub 0.4/As layer. Similar trends have also been shown theoretically for the bandwidth characteristics. The resulting noise reduction and potential bandwidth enhancement have been attributed to the fact that the high bandgap Al/sub 0.6/Ga/sub 0.4/As layer serves to energize the injected electrons, thereby minimizing their first dead space in the GaAs layer. We show theoretically that the same optimized structures yield optimal breakdown-probability characteristics when the APD is operated in Geiger mode. The steep breakdown-probability characteristics, as a function of the excess bias, of thick multiplication regions (e.g., in a 1000-nm GaAs homojunction) can be mimicked in much thinner optimized Al/sub 0.6/Ga/sub 0.4/As-GaAs APDs (e.g., in a 40-nm Al/sub 0.6/Ga/sub 0.4/As and 200-nm GaAs structure) with the added advantage of having a reduced breakdown voltage (e.g., from 36.5 V to 13.7 V).     

Avalanche noise characteristics of single Al/sub x/Ga/sub 1-x/As(0.3

Groves  C. Chia  C.K. Tozer  R.C. David  J.P.R. Rees  G.J. 《Quantum Electronics, IEEE Journal of》2005,41(1):70-75

Characteristics of In/sub 0.425/Al/sub 0.575/As-InxGa/sub 1-x/As metamorphic HEMTs with pseudomorphic and symmetrically graded channels

In/sub 0.425/Al/sub 0.575/As-In/sub x/Ga/sub 1-x/As metamorphic high electron mobility transistors (MHEMTs) with two different channel designs, grown by molecular beam epitaxy (MBE) system, have been successfully investigated. Comprehensive dc and high-frequency characteristics, including the extrinsic transconductance, current driving capability, device linearity, pinch-off property, gate-voltage swing, breakdown performance, unity-gain cutoff frequency, max. oscillation frequency, output power, and power gain, etc., have been characterized and compared. In addition, complete parametric information of the small-signal device model has also been extracted and discussed for the pseudomorphic channel MHEMT (PC-MHEMT) and the V-shaped symmetrically graded channel MHEMT (SGC-MHEMT), respectively.     

MESFET-like transferred-electron devices in In/sub 0.53/Ga/sub 0.47/As

In/sub 0.53/Ga/sub 0.47/As transferred-electron devices with Schottky-gate electrodes were fabricated. These devices can be used in optoelectronic circuits on InP or as millimetre wave oscillators. For the realisation of the gate electrode several enhancement layers were tested to increase the Schottky barrier height on In/sub 0.53/Ga/sub 0.47/As. The triggering of single dipole domains in the device was demonstrated.<>     

Highly linear Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMTs

We report an Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMT with enhanced linearity. By engineering the channel region, i.e., inserting a 6-nm-thick AlGaN layer with 5% Al composition in the channel region, a composite-channel HEMT was demonstrated. Transconductance and cutoff frequencies of a 1 /spl times/100 /spl mu/m HEMT are kept near their peak values throughout the low- and high-current operating levels, a desirable feature for linear power amplifiers. The composite-channel HEMT exhibits a peak transconductance of 150 mS/mm, a peak current gain cutoff frequency (f/sub T/) of 12 GHz and a peak power gain cutoff frequency (f/sub max/) of 30 GHz. For devices grown on sapphire substrate, maximum power density of 3.38 W/mm, power-added efficiency of 45% are obtained at 2 GHz. The output third-order intercept point (OIP3) is 33.2 dBm from two-tone measurement at 2 GHz.     

Refractive index step and optical confinement in Ga/sub 0.86/In/sub 0.14/As/sub 0.13/Sb/sub 0.87//Ga/sub 0.73/Al/sub 0.27/As/sub 0.02/Sb/sub 0.98/ double heterostructure lasers emitting at 2.2 mu m

Using theoretical fitting to measured transverse far field patterns in Ga/sub 0.86/In/sub 0.14/As/sub 0.13/Sb/sub 0.87//Ga/sub 0.73/Al/sub 0.27/As/sub 0.02/Sb/sub 0.98/ DH lasers emitting at 2.2 mu m the authors estimated the value of the active layer refractive index as 3.78. This value, higher than assumed earlier based on theoretical calculations, ensures good optical confinement for this kind of heterostructure and provides a good theoretical fit with the authors' experimental data of threshold current density against active layer thickness.<>     

Ultralow leakage In/sub 0.53/Ga/sub 0.47/As p-i-n photodetector grown on linearly graded metamorphic In/sub x/Ga/sub 1-x/P buffered GaAs substrate

A novel top-illuminated In/sub 0.53/Ga/sub 0.47/As p-i-n photodiodes (MM-PINPD) grown on GaAs substrate by using linearly graded metamorphic In/sub x/Ga/sub 1-x/P (x graded from 0.49 to 1) buffer layer is reported. The dark current, optical responsivities, noise equivalent power, and operational bandwidth of the MM-PINPD with aperture diameter of 60 /spl mu/m are 13 pA, 0.6 A/W, 3.4/spl times/10/sup -15/ W/Hz/sup 1/2/, and 7.5 GHz, respectively, at 1550 nm. The performances of the MM-PINPD on GaAs are demonstrated to be comparable to those of a similar device made on InGaAs-InP substrate.     

Low-temperature MBE-grown In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As/InP optical waveguides

The MBE growth of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As ( lambda /sub g/=1.06 mu m) layers in the temperature range of 400-450 degrees C was demonstrated to give high-quality optical waveguides which not only exhibit low propagation losses as low as 0.5 dB/cm at lambda =1.55 mu m but concomitantly high resistivity of >10/sup 4/ Omega cm. The refractive index of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As was estimated to be 3.207+or-0.03 at lambda =1.55 mu m.<>     

BCB-bridged distributed wideband SPST switch using 0.25-/spl mu/m In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic HEMTs

In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic high-electron mobility transistor (mHEMT) dc-30 GHz distributed single-pole-single through (SPST) switches were designed and fabricated using the low-/spl kappa/ benzocyclobutene (BCB) bridged technology. The current gain cutoff frequency, and the electron transit time of In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As mHEMTs have been investigated. By analyzing the extrinsic total delay time, the effective velocity of electrons can be estimated, and the average velocity is 2.3/spl times/10/sup 7/cm/s. The dc-30 GHz distributed wideband SPST switch exhibits an insertion loss of less than 5.5 dB, and an isolation larger than 30 dB, which is the first demonstration of the high-isolation of InAlAs-InGaAs mHEMTs monolithic switch. As to the power performance, this switch can handle the power up to 12 dBm at 2.4 GHz. After over 250 h of 85-85 (temperature =85/spl deg/C, humidity =85%) environmental evaluation, this BCB passivated and bridged microwave and monolithic integrated circuit switch demonstrates reliable RF characteristics without any significant performance change, which proves that this process using the low-/spl kappa/ BCB layer is attractive for millimeter-wave circuit applications.     

Characteristics of In/sub x/Al/sub 1-x/N-GaN high-electron mobility field-effect transistor

GaN-based field effect transistors commonly include an Al/sub x/Ga/sub 1-x/N barrier layer for confinement of a two-dimensional electron gas (2DEG) in the barrier/GaN interface. Some of the limitations of the Al/sub x/Ga/sub 1-x/N-GaN heterostructure can be, in principle, avoided by the use of In/sub x/Al/sub 1-x/N as an alternative barrier, which adds flexibility to the engineering of the polarization-induced charges by using tensile or compressive strain through varying the value of x. Here, the implementation and electrical characterization of an In/sub x/Al/sub 1-x/-GaN high electron mobility transistor with Indium content ranging from x=0.04 to x=0.15 is described. The measured 2DEG carrier concentration in the In/sub 0.04/Al/sub 0.96/N-GaN heterostructure reach 4/spl times/10/sup 13/ cm/sup -2/ at room temperature, and Hall mobility is 480 and 750 cm/sup 2//V /spl middot/ s at 300 and 10 K, respectively. The increase of Indium content in the barrier results in a shift of the transistor threshold voltage and of the peak transconductance toward positive gate values, as well as a decrease in the drain current. This is consistent with the reduction in polarization difference between GaN and In/sub x/Al/sub 1-x/N. Devices with a gate length of 0.7 /spl mu/m exhibit f/sub t/ and f/sub max/ values of 13 and 11 GHz, respectively.     

A novel InGaP/Al/sub x/Ga/sub 1-x/As/GaAs CEHBT

A new and interesting InGaP/Al/sub x/Ga/sub 1-x/As/GaAs composite-emitter heterojunction bipolar transistor (CEHBT) is fabricated and studied. Based on the insertion of a compositionally linear graded Al/sub x/Ga/sub 1-x/As layer, a near-continuous conduction band structure between the InGaP emitter and the GaAs base is developed. Simulation results reveal that a potential spike at the emitter/base heterointerface is completely eliminated. Experimental results show that the CEHBT exhibits good dc performances with dc current gain of 280 and greater than unity at collector current densities of J/sub C/=21kA/cm/sup 2/ and 2.70/spl times/10/sup -5/ A/cm/sup 2/, respectively. A small collector/emitter offset voltage /spl Delta/V/sub CE/ of 80 meV is also obtained. The studied CEHBT exhibits transistor action under an extremely low collector current density (2.7/spl times/10/sup -5/ A/cm/sup 2/) and useful current gains over nine decades of magnitude of collector current density. In microwave characteristics, the unity current gain cutoff frequency f/sub T/=43.2GHz and the maximum oscillation frequency f/sub max/=35.1GHz are achieved for a 3/spl times/20 /spl mu/m/sup 2/ device. Consequently, the studied device shows promise for low supply voltage and low-power circuit applications.     

High breakdown voltage (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P/InGaAs quasi-enhancement-mode pHEMT with field-plate technology

A high breakdown voltage and a high turn-on voltage (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P/InGaAs quasi-enhancement-mode (E-mode) pseudomorphic HEMT (pHEMTs) with field-plate (FP) process is reported for the first time. Between gate and drain terminal, the transistor has a FP metal of 1 /spl mu/m, which is connected to a source terminal. The fabricated 0.5/spl times/150 /spl mu/m/sup 2/ device can be operated with gate voltage up to 1.6 V owing to its high Schottky turn-on voltage (V/sub ON/=0.85 V), which corresponds to a high drain-to-source current (I/sub ds/) of 420 mA/mm when drain-to-source voltage (V/sub ds/) is 3.5 V. By adopting the FP technology and large barrier height (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P layer design, the device achieved a high breakdown voltage of -47 V. The measured maximum transconductance, current gain cutoff frequency and maximum oscillation frequency are 370 mS/mm, 22 GHz , and 85 GHz, respectively. Under 5.2-GHz operation, a 15.2 dBm (220 mW/mm) and a 17.8 dBm (405 mW/mm) saturated output power can be achieved when drain voltage are 3.5 and 20 V. These characteristics demonstrate that the field-plated (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P E-mode pHEMTs have great potential for microwave power device applications.     

Investigation of the impact of Al mole-fraction on the consequences of RF stress on Al/sub x/Ga/sub 1-x/N/GaN MODFETs

Variations of the low-frequency noise (LFN), power, and dc characteristics of a variety of SiN/sub x/ passivated AlGaN/GaN MODFETs with different values of Al mole-fraction, gate length, and gate drain spacing upon RF stress are investigated. It is experimentally evidenced that the variation of Al mole-fraction (x) of the barrier Al/sub x/Ga/sub 1-x/N layer from 0.2 to 0.4, has no considerable impact on the drain and gate low-frequency noise current characteristics. The most noticeable variation on the device characteristics upon long-term RF stressing has been on the pinch-off voltage. Although no material degradation by increasing the Al mole-fraction has been evidenced through the low-frequency noise data, it is observed that the variation of pinch-off voltage upon RF stressing becomes more important as the Al mole-fraction increases.     

Considerations for polarization insensitive optical switching and modulation using strained InGaAs/InAlAs quantum well structure

It is shown that In/sub 1-x/Ga/sub x/As/In/sub 0.52/Al/sub 0.48/As MQW structures with the wells under tensile strain obtained by the appropriate selection of the Ga mole fraction and well size can achieve polarization-insensitive optical switching and modulation for a wide range of wavelengths between 1.0 and 1.6 mu m. For example, a change in refractive index of -0.5% at about 1.55 mu m will facilitate an intersectional angle of more than 10 degrees in a total internal reflection switch which can be readily fabricated. Hence, this material system is promising for long-wavelength polarization-insensitive semiconductor optoelectronic devices.<>