Synthesis of polymer supported Ni (II)-Schiff Base complex and its usage as a catalyst in sodium borohydride hydrolysis

Influence of using as catalysis, Ni-Schiff Base complex which we previously synthesized [1] used to support with amberzyme oxirane resin (A.O.R.) polymer for increasing the catalytic activity in NaBH₄ hydrolysis reaction, to hydrogen generation was studied. The prepared catalyst was characterized by using SEM, XRD, BET, FT-IR analyze technique. Polymer supported Ni-Schiff Base complex catalyzed NaBH₄ hydrolysis reaction was investigated depending on concentration of NaBH₄, concentration of NaOH, temperature, percentage of Ni complex in total polymer supported Ni-Schiff Base complex and amount of catalyst factors. The maximum hydrogen production rate from hydrolysis of sodium borohydride with nickel-based complex catalyst compared to the pure nickel catalyst is increased from 772 mL H₂·g^?1 cat.·min^?1 to 2240 mL H₂ g^?1 cat.·min^?1 [1], and with supported amberzyme oxirane resin polymer this nickel based complex catalyst was increased to 13000 mL H₂·g^?1 cat.·min^?1 at 30 °C. The activation energy of complex catalyzed NaBH₄ hydrolysis reaction was found as 25.377 kJ/mol. This work also includes kinetic information for the hydrolysis of NaBH₄.     

Co3O4 hollow fiber: An efficient catalyst precursor for hydrolysis of sodium borohydride to generate hydrogen

Sodium borohydride (NaBH₄) is one of promising hydrogen storage materials for practical application, and the development of high-efficient catalysts for NaBH₄ hydrolysis to generate hydrogen is of critical importance. In this communication, Co₃O₄ hollow fiber composed of nanoparticles array was served as catalyst precursor and facilely prepared by combustion method with template of the absorbent cotton. For characterization, FE-SEM, HRTEM, EDS, XRD, FTIR and ICP were applied, respectively, and typical water-displacement method was performed to evaluate the catalytic activity. Using a solution composed of 10 wt% NaBH₄ and 2 wt% NaOH, hydrogen generation rate was up to 11.12 L min^?1 g^?1 (25 °C), which is much higher than that of the commercial cobalt oxides and similar catalyst precursors reported in literature.     

Solution combustion synthesized lithium cobalt oxide as a catalytic precursor for the hydrolysis of sodium borohydride

Solution combustion synthesis (SCS) has recently been explored as one method to synthesize metal oxides (e.g. Co₃O₄) that can serve as catalytic precursors for the hydrolysis of sodium borohydride (NaBH₄). In this work, SCS is used to produce the mixed metal oxide lithium cobalt oxide (LiCoO₂) from a solution of cobalt nitrate, lithium acetate, and glycine. Its subsequent use as an effective catalyst precursor for NaBH₄ hydrolysis is characterized and compared to commercially available LiCoO_2. To remove residual impurities from the SCS material the materials were heated at a rate of 10 °C min^?1 and held for 2 h at temperatures ranging from 500 to 800 °C and subsequently characterized. It was found that the layered phase of LiCoO₂ results at heat treat temperatures above 700 °C. Using a 0.6 wt.% aqueous solution of NaBH₄ at 25 °C and a 1 wt.% catalyst precursor loading, an optimized HGR of 2.09 L min^?1 g_cat^?1 was achieved for the solution combustion synthesized LiCoO₂. In contrast, at the same conditions, a HGR of 0.29 L min^?1 g_cat^?1 was obtained for commercial materials even though the specific surface area was much higher.     

Apricot Kernel shell waste treated with phosphoric acid used as a green,metal-free catalyst for hydrogen generation from hydrolysis of sodium borohydride

In this study, grinded apricot kernel shell (GAKS) biobased waste was used for the first time as a cost-effective, efficient, green and metal-free catalyst for hydrogen generation from the hydrolysis reaction of sodium borohydride (NaBH₄). For the hydrogen production by NaBH₄ hydrolysis reaction, GAKS was treated with various acids (HCl, HNO₃, CH₃COOH, H₃PO₄), salt (ZnCl₂) and base (KOH). As a result, the phosphoric acid (H₃PO₄) demonstrated better catalytic activity than other chemical agents. The hydrolysis of NaBH₄ with the GAKS-catalyst (GAKS_cat) was studied depending on different parameters such as acid concentration, furnace burning temperature and time, catalyst amount, NaBH₄ concentration and hydrolysis reaction temperature. The obtained GAKS_cat was characterized by ICP-MS, elemental analysis, TGA, XRD, FT-IR, Boehm, TEM and SEM analyses and was evaluated for its catalytic activity in the hydrogen production from the hydrolysis reaction of NaBH₄. According to the results, the optimal H₃PO₄ percentage was found as 15%. The maximum hydrogen generation rate from the hydrolysis of NaBH₄ with the GAKS_cat was calculated as 20,199 mL min⁻¹ g_cat⁻¹. As a result, it can be said that GAKS treated with 15% H₃PO₄ as a catalyst for hydrogen production is an effective alternative due to its high hydrogen production rate.     

Investigation on salisylaldimine-Ni complex catalyst as an alternative to increasing the performance of catalytic hydrolysis of sodium borohydride

In this study, 5-amino-2, 4-dichlorophenol-3, 5-ditertbutylsalisylaldimine-Ni complex catalyst is synthesised and used as an alternative to previous studies to produce hydrogen from hydrolysis of sodium borohydride. The resulting complex catalyst is characterised by XRD, XPS, SEM, FT-IR and BET surface area analyses. Experimental works are carried out at 30 °C with 2% NaBH₄, 7% NaOH and 5 mg of catalyst. The maximum hydrogen production rate from hydrolysis of sodium borohydride with nickel-based complex catalyst compared to the pure nickel catalyst is increased from 772 ml min^?1g^?1 to 2240 ml min^?1g^?1 by an increase of 190%. At the same time, the hydrolysis reaction with pure nickel catalyst is completed in 145 min while the hydrolysis reaction with nickel-based complex catalyst is completed in 50 min. The activation energy of this hydrolysis reaction was calculated as 18.16 kJ mol^?1. This work also includes kinetic information for the hydrolysis of NaBH₄.The reusability of the nickel-based complex catalyst used in this study has also been studied. The nickel-based complex catalyst is maintained the activity of 72% after the sixth use, compared to the first catalytic use.     

Effect of phosphoric acid and acetic acid addition on the hydrogen evolution using Ni based catalyst prepared in ethanol,methanol, and water solvents

Ni-based catalysts were synthesized in water, methanol and ethanol solvents by chemical reduction with sodium borohydride (NaBH₄). The obtained catalyst for the first time was used to catalyze the NaBH₄ hydrolysis reaction with phosphoric acid and acetic acid including different concentrations. The maximum hydrogen production rates obtained in the hydrolysis reaction including 0.5 M phosphoric acid and 0.1 M acetic acid of the Ni-based catalyst prepared in ethanol solvent were 5214 and 3650 ml g^?1 min^?1, respectively.     

Chitosan-mediated Co–Ce–B nanoparticles for catalyzing the hydrolysis of sodium borohydride

Highly dispersed Co–Ce–B nanoparticles supported on chitosan-derived carbon (Co–Ce–B/Chi–C) were synthesized through chemical reduction and carbonization. The morphology and microstructure of the Co–Ce–B/Chi–C nanocomposite were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Brunauer–Emmett–Teller adsorption analysis. This nanocomposite had uniform morphology and large surface area, and it showed high catalytic activity for NaBH₄ hydrolysis and good cycle stability. Compared with unsupported Co–Ce–B particles, this nanocomposite showed greatly increased catalytic activity for NaBH₄ hydrolysis. A remarkably high hydrogen generation rate of 4760 mL^?1 min^?1 g^?1 at 30 °C was achieved with low activation energy of 33.1 kJ mol^?1. These results indicate that the Co–Ce–B/Chi–C nanocomposite is a promising catalyst for on-demand hydrogen generation via NaBH₄ hydrolysis.     

Metal-organic frameworks (MOFs) and MOFs-derived CuO@C for hydrogen generation from sodium borohydride

Hydrogen gas has been considered as one of the promising sources of energy. Thus, several strategies including the hydrolysis of hydrides have been reported for hydrogen production. However, effective catalysts are highly required to improve the hydrogen generation rate. Two dimensional metal-organic frameworks (copper-benzene-1,4-dicarboxylic, CuBDC), and CuBDC-derived CuO@C were synthesized, characterized and applied as catalysts for hydrogen production using the hydrolysis and methanolysis of sodium borohydride (NaBH₄). CuBDC, and CuO@C display hydrogen generation rate of 7620, and 7240 mlH₂·g_cat⁻¹· min⁻¹, respectively for hydrolysis. While, CuBDC offers hydrogen generation rate of 9060 mlH₂·g_cat⁻¹· min⁻¹ for methanolysis. Both catalysts required short reaction time, and showed good recyclability. The materials may open new venues for efficient catalyst for energy-based applications.     

The use of metallurgical waste sludge as a catalyst in hydrogen production from sodium borohydride

In this study, the metallurgic sludge which contained oil and was obtained as waste of grinding, sharpening and milling parts was used in the production of hydrogen (H₂) from sodium borohydride (NaBH₄). The hydrolysis of NaBH₄ with the metallurgic sludge catalyst was investigated depending on several parameters such as sodium hydroxide (NaOH) concentration, catalyst amount, NaBH₄ concentration and temperature. The obtained metallurgic sludge catalyst was characterized by the XRD, FT-IR and SEM techniques and was evaluated for its activity in the H₂ generation from NaBH₄ hydrolysis. The maximum H₂ production rate from the hydrolysis of NaBH₄ with the metallurgic sludge catalyst was calculated as 9366 ml min⁻¹.g_cat⁻¹. The value of activation energy was found as 48.05 kJ mol⁻¹.     

Polypyrrole supported Co–W–B nanoparticles as an efficient catalyst for improved hydrogen generation from hydrolysis of sodium borohydride

Effective and reusable catalysts with high performance are essentially necessary for NaBH₄ based on-demand hydrogen generators to the widespread use for energy conversion in fuel cell power systems. Herein, we report a facile synthesis of surfactant-directed polypyrrole-supported Co–W–B nanoparticles as a robust catalyst for efficient hydrolysis of NaBH₄ reaction. This non-noble metal catalyst provides much higher catalytic activity than a conventional cobalt boride catalyst. By incorporating tungsten to catalyst composition and tuning molar ratio of W/(Co + W), about a four-fold higher hydrogen generation rate was attained compared to bare Co–B. Among the all catalysts tested, Co–W–B/PPy with 7.5% W possessed the remarkable catalytic performance of 9.92 L min^?1 g^?1 and high stability over five cycles with the apparent activation energy of 49.18 kJ mol^?1.     

Highly efficient and reactivated electrocatalyst of ruthenium electrodeposited on nickel foam for hydrogen evolution from NaBH4 alkaline solution

Cyclic life of catalyst for hydrolysis of sodium borohydride is one of the key issues, which hinder commercialization of hydrogen generation from sodium borohydride (NaBH₄) solution. This paper is aimed at promoting the cyclic life of Ru/Ni foam catalysts by employing an electro-deposition method. The effect of hydrolysis parameters on hydrolysis of sodium borohydride was studied for improving the catalytic performance. It is found that the hydrogen generation rate (HGR) of the hydrolysis reaction catalyzed by Ru/Ni foam catalyst can reach as high as 23.03 L min^?1 g^?1 (Ru). The Ru/Ni foam catalyst shows good catalytic activity after a cycleability test of 100 cycles by rinsing with HCl, which is considered as more effective method than rinsing with water for recovering the performance of Ru/Ni foam catalyst.     

Synthesis of cobalt-doped catalyst for NaBH4 hydrolysis using eggshell biowaste

In the present study, a cobalt-doped catalyst was prepared from chicken eggshell powder (CEP) biowaste to be used in the hydrolysis of sodium borohydride (NaBH₄). In the presence of the prepared catalyst (CEP_cat), possible effects of the parameters of NaOH concentration (%), catalyst amount (g), NaBH₄ concentration (%), process temperature (^oC) and reusability affecting the hydrolysis of sodium borohydride were examined. The CEP_cat obtained was characterized with FT-IR, TGA, XRD, SEM and EDX analyses. The hydrogen generation rate (HGR) was determined as 432 mL g_Co⁻¹ min⁻¹ in the presence of 1 g CEP_cat, a CoO/CaO ratio of 10/90 and 1% NaBH₄ concentration. The activation energy of the NaBH₄ hydrolysis reaction was calculated as 16.78 kJ mol⁻¹. After 16 reuses of the CEP_cat there was no significant decrease in the hydrogen volume. Compared to the first use while there was an increase in the HGR. These results showed that the CEP_cat prepared has a significant advantage over other catalysts for use in NaBH₄ hydrolysis.     

Co complex modified on Eupergit C as a highly active catalyst for enhanced hydrogen production

In present paper, the preparation and catalytic activity of Eupergit C polymer (EC) modified Co complex was reported. Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Brunauer-Emmett-Teller Surface Area Analysis (BET), Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM) coupled with energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) were used to characterization of catalyst. EC modified-Co complex was the first time examined as a catalyst in NaBH₄ hydrolysis to H₂ evolution. The kinetic calculations were determined by using two different kinetic methods. The low activation energy barriers were achieved as 21.673 kJ mol^?1 for nth order model and as 21.061kJmol^?1 for Langmuir-Hinshelwood (L-H) model at low temperatures. EC modified-Co complex catalyst exhibited high performance with H₂ evolution rates of 3914 mL H₂g_cat^?1min^?1 and 9183 mLH₂g_cat^?1min^?1 at 30 °C–50 °C. Additionally, Langmuir–Hinshelwood mechanism was explained for EC modified Co complex catalyzed sodium borohydride hydrolysis reaction. The reusability experiments showed that EC modified-Co complex catalyst maintained excellent stability with 100% conversion and without significant lost after the 6th run.     

Effective TiO2 supported Cu-Complex catalyst in NaBH4 hydrolysis reaction to hydrogen generation

This paper reports the experimental results on using TiO₂ based Cu(II)-Schiff Base complex catalyst for hydrolysis of NaBH₄. In the presence of Cu-Schiff Base complex which we reported in advance [1] and with titanium dioxide supports a novel catalyst named TiO₂ supported 4-4′-Methylenbis (2,6-diethyl)aniline-3,5-di-tert-buthylsalisylaldimine-Cu complex is prepared, successfully. The synthesized catalyst was characterized by means of X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Brunauer-Emmett-Teller Surface Area Analysis (BET) and Fourier Transform Infrared Spectroscopy (FT-IR). The as prepared catalyst was employed to generate hydrogen through hydrolysis reaction of NaBH₄. Effects of different parameters (e.g. amount of Cu-Schiff Base complex in all catalyst, percentage of NaBH₄, percentage of NaOH, amount of TiO₂ supported Cu-Schiff Base complex catalyst and different temperatures) are also investigated. A high apparent activation energy (Ea), 25,196 kJ.mol^-1 is calculated for hydrolysis of NaBH₄ at 20–50 °C. Hydrogen generation rate was 14,020 mL H₂/g_cat.min and 22,071 mL H₂/g_cat.min in order of 30 °C and 50 °C.     

Hydrogen generation from alkaline NaBH4 solution using a dandelion-like Co–Mo–B catalyst supported on carbon cloth

In this study, a dandelion-like Co–Mo–B catalyst was prepared on carbon cloth (CC) by two-step electrodeposition method for the first time. The composition and microscopy are characterized by XRD and SEM technology. The results revealed that the as-synthesized Co–Mo–B catalyst exhibited high hydrogen generation rate (1280.80 mL min^?1 g^?1) and low activation energy (51.0 kJ mol^?1) for the hydrolysis of alkaline NaBH₄ solution. The results reveal that the reason might be due to high specific surface of the novel dandelion-like nanostructure and the synergistic effect of Co, Mo and B. Moreover, the catalytic activity was closely related to NaOH concentration, and OH^– anions were competitive with BH₄^– anions in alkaline NaBH₄ solution to transfer to the catalyst surface.     

Highly stable and controllable CoB/Ni-foam catalysts for hydrogen generation from alkaline NaBH4 solution

In this work, a series of shaped CoB/Ni-foam catalysts were directly synthesized by using a convenient and simple electroless plating method. Despite the low loading amount of CoB, the catalysts showed high catalytic performance in the hydrolysis of NaBH₄ solution, and the maximum hydrogen generation rate reached 1930 mL min^?1 (g CoB)^?1 in 1 wt % NaBH₄ + 5 wt % NaOH solution at 293 K. The catalysts demonstrated distinct stability, and the hydrogen generation rate was almost unchanged after 6 cycles. Furthermore, the catalysts could be easily recovered from the reaction system by a magnet. These characteristics make CoB/Ni-foam a high performance and cost effective catalyst for practical applications of hydrogen generation.     

Salicylaldimine-Ni complex supported on Al2O3: Highly efficient catalyst for hydrogen production from hydrolysis of sodium borohydride

In this study, the Ni-based complex catalyst containing nickel of 1% supported on Al₂O₃ is used as for the hydrogen production from NaBH₄ hydrolysis. The maximum hydrogen production rate from hydrolysis of NaBH₄ with Ni-based complex catalyst supported on Al₂O₃ containing nickel of 1% is 62535 ml min^?1 g^?1 (complex catalyst containing 1 wt% Ni). The resulting complex catalyst is characterised by XRD, XPS, SEM, FT-IR, UV, and BET surface area analyses. The Arrhenius activation energy is found to be 27.29 kJ mol^?1 for the nickel-based complex catalyst supported on Al₂O₃. The reusability of the catalyst used in this study has also been investigated. The Ni-based complex catalyst supported on Al₂O₃ containing nickel of 1% is maintained the activity of 100% after the fifth use, compared to the first catalytic use. The n value for the reaction rate order of NaBH₄ is found to be about 0.33.     

Effect of phosphoric acid addition on the hydrogen production from hydrolysis of NaBH4 with Cu based catalyst

Cu based catalysts were synthesized in water and methanol solvents by chemical reduction with sodium borohydride (NaBH₄). The obtained catalyst was used to catalyze the NaBH₄ hydrolysis reaction with phosphoric acid (H₃PO₄) including different concentrations. Surface morphology and structural properties of the Cu based catalysts prepared in water and methanol solvents were studied using by X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area measurements and Fourier-transform infrared spectroscopy (FTIR) analyses, respectively. The catalytic activity of the catalysts has been tested by measuring the hydrogen production rate by the acidified hydrolysis of NaBH₄. The maximum hydrogen production rates in the hydrolysis reaction including 0.25 M H₃PO₄ using the Cu based catalyst prepared in water and methanol solvents were 825 and 660 ml g^?1min^?1, respectively. At the same time, the hydrogen production experiments were carried out from this hydrolysis reaction with only H₃PO₄ and NaBH₄ interactions without using Cu metal catalyst. The activation energy obtained based on the nth order reaction model was found to be 61.16 kJ mol^?1.     

Bacterial cellulose derived carbon as a support for catalytically active Co–B alloy for hydrolysis of sodium borohydride

The fast release of hydrogen from borohydride is highly desired for a fuel cell system. However, the generation of hydrogen from borohydride is limited by the low activity and low stability of the catalyst. Herein, a highly active catalyst is synthesized through a simple one-step chemical reduction using bacterial cellulose (BC) derived carbon as a support for the active Co–B alloy. The morphology and microstructure of the BC/Co–B nanocomposite are characterized by SEM, TEM, XRD, and BET adsorption analysis. The BC/Co–B possesses high surface area (125.31 m² g^?1) high stability and excellent catalytic activity for the hydrolysis of NaBH₄. Compared with unsupported Co–B nanocomposite or commercial carbon supported Co–B, the BC/Co–B nanocomposite shows greatly improved catalytic activity for the hydrolysis of NaBH₄ with a high hydrogen generation rate of 3887.1 mL min^?1 g^?1 at 30 °C. An activation energy of 56.37 kJ mol^?1 was achieved for the hydrolysis reaction. Furthermore, the BC/Co–B demonstrated excellent stability. These results indicate that the BC/Co–B nanocomposite is a promising candidate for the hydrolysis of borohydrides.     

Development of highly efficient and reusable Ruthenium complex catalyst for hydrogen evolution

Herein, we report an efficient, environmentally friendly and stable catalyst development to hydrogen evolution from sodium borohydride hydrolysis. For this purpose, Ruthenium complex catalyst successfully fabricated via 5-Amino-2,4-dichlorophenol-3,5-ditertbutylsalisylaldimine ligand and RuCl₃·H₂O salt. Ru complex catalyst was identified with X-Ray Diffraction Analysis, Infrared Spectroscopy, Elemental Analysis, Transmission electron microscopy, Scanning Electron Microscope and Brunauer-Emmett-Teller Surface Area Analysis. According to the analysis results, it was confirmed that Ru complex catalyst was successfully synthesized. Ru complex was used as a catalyst in NaBH₄ hydrolysis. The kinetic performance of Ru complex catalyst was evaluated at various reaction temperatures, various sodium borohydride concentration, catalyst concentration and sodium hydroxide concentration in hydrogen evolution. The apparent activation energy for the hydrolysis of sodium borohydride was determined as 25.8 kJ mol^?1. With fully conversion, the promised well durability of Ru complex was achieved by the five consecutive cycles for hydrogen evolution in sodium borohydride hydrolysis The hydrogen evolution rates were 299,220 and 160,832 mL H₂ g_cat^?1 min^?1 in order of at 50 °C and 30 °C. Furthermore, the proposed mechanism of Ru complex catalyzed sodium borohydride hydrolysis was defined step by step. This study provides different insight into the rational design and utilization and catalytic effects of ruthenium complex in hydrogen evolution performance.