Amine-impregnated MCM-41 in post-combustion CO2 capture: Synthesis,characterization, isotherm modelling

In this study, a composite mesoporous silica material MCM-41 (Mobil composite matter) is impregnated with monoethanolamine (MEA) as primary linear amine, benzylamine (BZA) as primary cyclic amine and N-(2-aminoethyl) ethanolamine (AEEA) as secondary diamine and the effects of amine loading, amine type, CO₂ partial pressure and adsorption temperatures on the CO₂ adsorption are investigated. The CO₂ adsorption performances of MCM-41 and amine impregnated MCM-41 samples are studied up to 1 bar of CO₂ partial pressure and the temperature range of 25–60 °C. The amine loadings (% impregnation) are optimized for maximum CO₂ uptake. The materials are characterised using N₂ adsorption/desorption isotherm, Fourier Transform Infrared (FT-IR) Spectroscopy, Thermogravimetric (TGA) and Elemental (CHNS) analysis. The materials have shown good structural and thermal stability. The MCM-41-40%AEEA, MCM-41-40%BZA and MCM-41-50%MEA samples are exhibited the CO₂ adsorption capacity of 2.34 mmol/g (102.98 mg/g), 0.908 mmol/g (39.96 mg/g) and 1.47 mmol/g (64.69 mg/g) respectively. The CO₂ uptake of MCM-41-40%AEEA is 3.5 times higher than that of in MCM-41 (0.68 mmol/g) and it is also the highest reported value as di-amine impregnated MCM-41. The results indicated that the adsorption capacities of the materials (MCM-41 and MCM-41-40%AEEA) are decreased with an increase of adsorption temperature in the range of 25–60 °C. The Freundlich, Langmuir, Sips and Toth isotherm models are used to correlate and predict experimental CO₂ adsorption data. The Sips and Toth isotherm models are found to be better fitted with the experimental data. The isosteric heat of adsorption of MCM-41 and MCM-41-40%AEEA samples are also calculated from Van’t Hoff plot using iSorbHP-win instrumental analysis software in the experimental temperature range.     

Compatibilizing effect of mesoporous fillers on the mechanical properties and morphology of polypropylene and polystyrene blend

Polypropylene(PP)/Polystyrene(PS) (PP/PS = 80/20) blend with different types of fillers were prepared by using melt method. Four different types of fillers, namely mesoporous MCM-41 (without template), nano-SiO₂, Polymethylmethacrylate (PMMA)/MCM-41 and PMMA/SiO₂ were considered. For PMMA/MCM-41 filler, the synthesis of the filler consisting of entrapped strand of PMMA within the pores of mesoporous MCM-41 (without template) was described. The mechanical properties of the blend determined as the nano-fillers contents and the different types of blend were found to vary with the different interface between fillers and the matrix. SEM revealed a good interaction between the matrix phases and PMMA/MCM-41 or MCM-41 (without template). The decreased T_g of PS implied that the good adhesion between PP and PS blend was obtained by adding PMMA/MCM-41 nano-filler.     

Influence of pH on the sorption behaviour of uranyl ions in mesoporous MCM-41 and MCM-48 molecular sieves

The sorption of uranyl ions in mesoporous MCM-41 and MCM-48 was accomplished with the help of a direct-template-exchange route, and the progress was monitored as a function of pH of the precursor uranyl nitrate solution. Under identical conditions of synthesis, around one and a half times larger amount of uranium was found to be sorbed in MCM-48 (∼12.5 wt.%) as compared to MCM-41 (∼9.5 wt.%). Further, the powder X-ray diffraction (XRD) data revealed that the expansion of unit cell parameters and broadening of reflections of the uranium containing samples depended on the pH of the precursor uranyl solution. Likewise, the Fourier transform infrared spectroscopy (FT-IR) studies showed a progressive decrease in the frequency of the axial OUO asymmetric stretching vibrational band, ν_a(UO) of the anchored uranyl groups with the increase of pH of the exchanging uranyl solution. The presence of two bands at ∼920 and 879 cm⁻¹ for uranyl exchanged samples prepared at pH > 5 indicated the presence of trinuclear (UO₂)₃⁺₅(OH) species. The occlusion of uranium thus depends upon the pore structure of the host material and the nature and dimension of the hydrolysis species formed at a particular pH of uranyl solution. Furthermore, the template-exchange of hexavalent uranium in MCM-41 and MCM-48 not only results in the formation of bulky hydrolysis species in the mesovoids, but also substitutes (isomorphously) in the silicate matrix resulting in the formation of UMCM-41 and UMCM-48.     

Preparation of high nickel-containing MCM-41-type mesoporous silica via a modified direct synthesis method

A method with modifying tetraethyl orthosilicate (TEOS) with nickel species has been developed for the synthesis of mesoporous silica with high nickel content (11.8 wt.% of Ni or even higher). With the method, MCM-41-type materials were obtained with high BET surface area reaching 868 m²/g and pore volume up to 0.73 cm³/g. The materials were characterized by means of X-ray powder diffraction, transmission electron microscopy, energy dispersive X-ray spectroscopy, N₂ adsorption, Fourier transform infrared and X-ray photoelectron spectroscopy. Nickel species were incorporated into the silica frameworks. The mesostructures still remain after activation using H₂ at 773 K.     

In situ incorporation of nickel nanoparticles into the mesopores of MCM-41 by manipulation of solvent-solute interaction and its activity toward adsorptive desulfurization of gas oil

In this contribution, different amounts of nickel were incorporated into the mesopores of MCM-41 via an in situ approach. A hydrophobic nickel precursor was incorporated into the nanochannels of mesoporous silica by manipulation of solvent-solute interaction. The synthesized material was characterized using X-ray diffraction, nitrogen physisorption, temperature programmed reduction, and transmission electron microscopy. The results implicate the formation of MCM-41 with well-ordered hexagonal structure and establish also the presence of nickel nanoparticles inside the nanochannels of mesoporous silica. Adsorptive desulfurization of gas oil was conducted using the nickel-incorporated MCM-41 samples. The effects of nickel concentration, temperature of process and feed flow rate on the desulfurization process were examined. The MCM-41 containing 6 wt.% of nickel had both the highest breakthrough sulfur adsorption capacity and total sulfur adsorption capacity, which were 0.69 and 1.67 mg sulfur/g adsorbent, respectively. The breakthrough sulfur adsorption capacity was almost regained after reductive regeneration of spent adsorbent. The obtained results suggest that the method applied for the synthesis of Niy/MCM resulted in formation of well-dispersed, accessible and small nickel nanoparticles incorporated into the pores of MCM-41 which might be an advantage for adsorption of refractory sulfur compounds from low sulfur gas oil.     

Ultrasonic-assisted synthesis and magnetic studies of iron oxide/MCM-41 nanocomposite

Iron oxide nanoparticles were stabilized within the pores of mesoporous silica MCM-41 amino-functionalized by a sonochemical method. Formation of iron oxide nanoparticles inside the mesoporous channels of amino-functionalized MCM-41 was realized by wet impregnation using iron nitrate, followed by calcinations at 550 °C in air. The effect of functionalization level on structural and magnetic properties of obtained nanocomposites was studied. The resulting materials were characterized by powder X-ray diffraction (XRD), high-resolution transmission electron microscopy and selected area electron diffraction (HRTEM and SAED), vibrating sample and superconducting quantum interface magnetometers (VSM and SQUID) and nitrogen adsorption–desorption isotherms measurements. The HRTEM images reveal that the most of the iron oxide nanoparticles were dispersed inside the mesopores of silica matrix and the pore diameter of the amino-functionalized MCM-41 matrix dictates the particle size of iron oxide nanoparticles. The obtained material possesses mesoporous structure and interesting magnetic properties. Saturation magnetization value of magnetic iron oxide nanopatricles stabilized in MCM-41 amino-functionalized by in situ sonochemical synthesis was 1.84 emu g⁻¹. An important finding is that obtained magnetic nanocomposite materials exhibit enhanced magnetic properties than those of iron oxide/MCM-41 nanocomposite obtained by conventional method. The described method is providing a rather short preparation time and a narrow size distribution of iron oxide nanoparticles.     

Hollow MCM-41 microspheres derived from P(St-MMA)/MCM-41 core/shell composite particles

In soap-free latex media, poly(styrene-methyl methacrylate)/MCM-41 core/shell composite microspheres have been fabricated by adding silicate source in batches. In this process, silicate species and the surfactant micelles were self-assembled into 2-dimensional hexagonal arrangement on the surface of P(St-MMA) microspheres. Hollow MCM-41 microspheres were obtained via removing polymer core by solvent. XRD, TEM, IR and N₂ adsorption-desorption analysis were applied to characterize products. The results showed that average diameter and wall thickness of hollow MCM-41 microspheres is about 240 nm and 20 nm, respectively. Results of N₂ adsorption-desorption indicate that hollow MCM-41 microspheres possess a highly ordered mesoporous structure and a narrow pore distribution with a mean value of 2.34 nm.     

Room temperature synthesis of Si-MCM-41 using polymeric version of ethyl silicate as a source of silica

Synthesis of mesoporous MCM-41 materials at room temperature using less expensive polymeric version of ethyl silicate (40 wt% SiO₂) as a source of silica was established. The influence of crucial synthesis parameters such as molar ratios of H₂O/NH₄OH, NH₄OH/SiO₂ and CTMABr/SiO₂ in gel on the quality of the phase formed was investigated. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and low temperature N₂ adsorption-desorption isotherms have been employed to characterize the products. The magnitude of orderness, textural properties and thermal stability of the Si-MCM-41 samples prepared under identical judiciously pre-controlled synthesis conditions using ethyl silicate and conventional tetraethyl orthosilicate (TEOS) were assessed. Even though, ethyl silicate has proved to be suitable source for the preparation of MCM-41 at room temperature, there exists an optimum value of H₂O/NH₄OH for different NH₄OH/SiO₂ molar ratios in the gel. Changes in the morphology were observed when NH₄OH/SiO₂, H₂O/NH₄OH molar ratios in the gels were changed.     

A novel application of mesoporous silica material for extraction of pesticides

The mesoporous silica material MCM-41 was prepared by the sol-gel method and characterized using X-ray diffraction (XRD), N₂ adsorption-desorption and thermogravimetric analysis. The material was tested for extraction of trichlorfon, pyrimethanil, tetraconazole, thiabendazole, imazalil and tebuconazole from mango fruit, with analysis using gas chromatography-mass spectrometry (GC/MS). In experiments carried out in triplicate, at a 1.0 mg/kg concentration level, recoveries using the MCM-41 sorbent were in the range 73-103%. Comparison of MCM-41 with commercially available silica gel showed that MCM-41 was a similar extracting phase for the pesticides investigated with a significant cost advantage over this conventional material.     

New mesoporous silica/carbon composites by in situ transformation of silica template in carbon/silica nanocomposite

Hard template-based fabrication of mesoporous carbon unavoidably goes through the removal process of the template to generate template-free carbon replica, including troublesome disposal of template waste often accompanied by toxic etchant, which not only increases the fabrication cost of materials but also raises serious environmental concerns. As a novel strategy to overcome such problem, a direct in situ synthesis approach using silica waste in carbon/silica nanocomposite as a silica source and cetyltrimethylammonium bromide as a porogen under basic condition is reported in this study for the generation of a new composite composed of mesoporous MCM-41 silica and hollow carbon capsule. The resultant MCM-41/carbon capsule composite offers a 3-D interconnected multimodal pore system, which discloses a wide pore range of ordered uniform mesopores (ca 2.3?nm) resulting from MCM-41 silica and disordered uniform mesopores (ca 3.8?nm) and macropores (ca 300?nm) from hollow mesoporous carbon, respectively. The composite has a high specific surface area (ca 909?m²/g) and large pore volume (ca 0.73?cm³/g). The in situ transformation approach of silica waste into valuable mesoporous silica is considered as a promising scalable route for efficient new multi-functional composites useful for a wide range of applications such as adsorption of volatile organic compounds and radioactive wastes produced in a nuclear facility.     

Functionalization of mesoporous MCM-41 for the delivery of curcumin as an anti-inflammatory therapy

In this study, mesoporous silica nanoparticles (MSNs) composed of MCM-41 were synthesized and modified with amine groups (i.e., NH₂) to form NH_2/MCM-41, which was loaded with curcumin (CUR) to form CUR@NH₂/MCM-41 to create an efficient carriers in drug delivery systems (DDSs). The three samples (i.e., pure MCM-41, NH₂/MCM-41, and CUR@NH₂/MCM-41) were characterized using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transition electron microscopy (TEM), and a thermogravimetric analyzer (TGA). The study investigated the effect of the carrier dose, CUR concentration, pH, and contact time on the drug loading efficiency (DLE%) by adsorption. The best DLE% for MCM-41 and NH₂/MCM-41 was found to be 15.78 and 80%, respectively. This data demonstrated that the Langmuir isotherm had a greater correlation coefficient (R²) of 0.9840 for MCM-41 and 0.9666 for NH₂/MCM-41 than the Freundlich and Temkin isotherm models. A pseudo-second-order kinetic model seems to fit well with R² = 0.9741 for MCM-41 and R² = 0.9977 for NH₂/MCM-41. A phosphate buffer solution (PBS) with a pH of 7.4 was utilized to study CUR release behavior. As a result, the full release after 72 h was found to have a maximum of 74.1% and 29.95% for pure MCM-41 and NH₂/MCM-41, respectively. The first-order, Weibull, Hixson-Crowell, Korsmeyer-Peppas, and Higuchi kinetic release models were applied to releasing CUR from CUR@MCM-41 and CUR@NH₂/MCM-41. The Weibull kinetic model fit well, with R² = 0.944 and 0.96912 for pure MCM-41 and NH₂/MCM-41, respectively.     

High pressure carbon dioxide adsorption on nanoporous carbons prepared by Zeolite Y templating

Nanoporous carbons were synthesized by chemical vapor deposition using furfuryl alcohol/butylene as a carbon source and zeolite Y as a hard template (ZYC). The ZYC were characterized by PXRD, N₂ sorption, and SEM. The carbon materials exhibited predominant microporosity, and the specific surface area increased from 2563 to 3010 m² g⁻¹ as the pyrolysis temperature was raised from 800 to 1000 °C. ZYC prepared at 1000 °C showed a CO₂ adsorption capacity of 986 mg g⁻¹_adsorbent at 40 bar 298 K, which surpasses the capacities of commercial carbons and mesoporous carbon CMK-3, and closely approaches the best performance of the metal organic framework MOF-177. The CO₂ adsorption capacities of the adsorbents were found to be closely correlated with the BET surface areas of the materials tested.     

Laccase immobilized on methylene blue modified mesoporous silica MCM-41/PVA

The mesoporous silica sieve MCM-41 containing methylene blue (MB) provides a suitable immobilization of biomolecule matrix due to its uniform pore structure, high surface areas, good biocompatibility and nice conductivity. Based on this, a facilely fabricated amperometric biosensor by entrapping laccase into the MB modified MCM-41/PVA composite film has been developed. Laccase from Trametes versicolor is assembled on a composite film of MCM-41 containing MB/PVA modified Au electrode and the electrode is characterized with respect to transmission electron microscopy (TEM) and scanning electron microscopic (SEM), Cyclic voltammetry (CV), response time, detection limit, linear range and activity of laccase. The laccase modified electrode remains good redox behavior in pH 4.95 acetate buffer solution, at room temperature in present of 0.1 mM catechol. The response time (t_90%) of the modified electrode is less than 4 s for catechol. The detection limit is 0.331 µM and the linear detect range is about from 4.0 µM to 87.98 µM for catechol with a correlation coefficient of 0.99913(S/N = 3). The apparent Michaelis–Menten (K_M^app) is estimated using the Lineweaver–Burk equation and the K_M^app value is about 0.256 mM. This work demonstrated that the mesoporous silica MCM-41 containing MB provides a novel support for laccase immobilization and the construction of biosensors with a faster response and better bioactivity.     

The influence of Na2CO3 content and Ni concentration on the physicochemical properties of nanometer Y-substituted nickel hydroxide

Nanometer Y-substituted nickel hydroxide was prepared by supersonic co-precipitation method with Na₂CO₃ as a buffer and NiCl₂ as a nickel source. The crystal structure, morphology, particle size distribution and electrochemical performance affected by the buffer (Na₂CO₃) content and Ni²⁺ concentration are characterized. The results indicate most of the samples are co-existence with α and β phases and the proportion of α-Ni(OH)₂ increases with the increase of Na₂CO₃, but decreases with the increase of Ni²⁺ concentration. The primary particles of samples are nanometer particles and the shape of primary particles transform from acicular to quasi-spherical with increasing Na₂CO₃ content, but converse process for the increase of Ni²⁺ concentration. The average particle size decreases initially and then increases. Complex electrodes were prepared by mixing 8 wt.% nickel hydroxides with commercial micro-size spherical nickel. The discharge capacities of samples increase initially and then decrease with increasing Na₂CO₃ content or decreasing Ni²⁺ concentration. When Na₂CO₃ content is 0.08 g and Ni²⁺ concentration is 0.2 mol/L, the sample has better electrochemical performance, such as larger discharge capacity (316.3 mAh/g at 0.2 C rate), lower charge voltage and higher discharge plateau, than those of other samples.     

Infrared to visible upconversion luminescence in Er/Yb co-doped CeO2 inverse opal

Infrared to visible upconversion luminescence has been investigated in Er³⁺/Yb³⁺ co-doped CeO₂ inverse opal. Under the excitation of 980 nm diode lasers, visible emissions centered at 525, 547, 561, 660 and 680 nm are observed, which are assigned to the Er³⁺ transitions of ²H_11/2 → ⁴I_15/2 (525 nm), ⁴S_3/2 → ⁴I_15/2 (547, 561 nm), ⁴F_9/2 → ⁴I_15/2 (660 and 680 nm), respectively. The effect of photonic band gap on the upconversion luminescence intensity was also obtained. Additionally, the upconversion luminescence mechanism was studied. The dependence of Er³⁺ upconversion emission intensity on pump power reveals that it is a two-photon excitation process.     

Synthesis and characterization of surface-modified and organic-functionalized MCM-41 type ordered mesoporous materials

A new and efficient method for the preparation of MCM-41 type ordered mesoporous phases using phosphate as promoter under reflux conditions is reported. The various mesoporous materials studied were: silica (Si-MCM-41), alumino-silicate (Al-MCM-41), and titanium-silicate (Ti-MCM-41). Our concept of promoter-assisted synthesis of zeolites and related microporous materials was found to be applicable in the synthesis of ordered mesoporous materials as well. The addition of small catalytic quantity of phosphate ions (PO ₄ ³⁻ ), used as promoters, significantly reduced the synthesis time (by a factor of 3–4) of all these mesoporous materials. The synthesis of new MCM-41 type organic-inorganic composite materials with unique properties is also reported.     

Effective heavy metal removal from aqueous systems by thiol functionalized magnetic mesoporous silica

A thiol-functionalized magnetic mesoporous silica material (called SH-mSi@Fe₃O₄), synthesized by a modified Stöber method, has been investigated as a convenient and effective adsorbent for heavy metal ions. Structural characterization by powder X-ray diffraction, N₂ adsorption-desorption isotherm, Fourier transform infrared spectroscopy and elemental analyses confirms the mesoporous structure and the organic moiety content of this adsorbent. The high saturation magnetization (38.4 emu/g) make it easier and faster to be separated from water under a moderate magnetic field. Adsorption kinetics was elucidated by pseudo-second-order kinetic equation and exhibited 3-stage intraparticle diffusion mode. Adsorption isotherms of Hg and Pb fitted well with Langmuir model, exhibiting high adsorption capacity of 260 and 91.5 mg of metal/g of adsorbent, respectively. The distribution coefficients of the tested metal ions between SH-mSi@Fe₃O₄ and different natural water sources (groundwater, lake water, tap water and river water) were above the level of 10⁵ mL/g. The material was very stable in different water matrices, even in strong acid and alkaline solutions. Metal-loaded SH-mSi@Fe₃O₄ was able to regenerate in acid solution under ultrasonication. This novel SH-mSi@Fe₃O₄ is suitable for repeated use in heavy metal removal from different water matrices.     

The investigation of MCM-48-type and MCM-41-type mesoporous silica as oral solid dispersion carriers for water insoluble cilostazol

Objective: To explore the suitable application of MCM-41 (Mobil Composition of Matter number forty-one)-type and MCM-48-type mesoporous silica in the oral water insoluble drug delivery system.

Methods: Cilostazol (CLT) as a model drug was loaded into synthesized MCM-48 (Mobil Composition of Matter number forty-eight) and commercial MCM-41 by three common methods. The obtained MCM-41, MCM-48 and CLT-loaded samples were characterized by means of nitrogen adsorption, thermogravimetric analysis, ultraviolet-visible spectrophotometry, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry and powder X-ray diffractometer.

Results: It was found that solvent evaporation method was preferred according to the drug loading efficiency and the maximum percent cumulative drug dissolution. MCM-48 with 3D cubic pore structure and MCM-41 with 2D long tubular structure are nearly spherical particles in 300–500?nm. Nevertheless, the silica carriers with similar large specific surface areas and concentrating pore size distributions (978.66?m²/g, 3.8?nm for MCM-41 and 1108.04?m²/g, 3.6?nm for MCM-48) exhibited different adsorption behaviors for CLT. The maximum percent cumulative drug release of the two CLT/silica solid dispersion (CLT-MCM-48 and CLT-MCM-41) was 63.41% and 85.78% within 60?min, respectively; while in the subsequent 12?h release experiment, almost 100% cumulative drug release were both obtained. In the pharmacokinetics aspect, the maximum plasma concentrations of CLT-MCM-48 reached 3.63?mg/L by 0.92?h. The AUC_0–∞ values of the CLT-MCM-41 and CLT-MCM-48 were 1.14-fold and 1.73-fold, respectively, compared with the commercial preparation.

Conclusion: Our findings suggest that MCM-41-type and MCM-48-type mesoporous silica have great promise as solid dispersion carriers for sustained and immediate release separately.     

Phosphate adsorption on aluminum-coordinated functionalized macroporous–mesoporous silica: Surface structure and adsorption behavior

In this study, Al(III)-coordinated diamino-functionalized macroporous–mesoporous silica was synthesized and characterized by X-ray diffraction, N₂ adsorption–desorption, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy. Because of well-defined and interconnecting macroporous–mesoporous networks, the resulting adsorbent (MM-SBA) exhibited a significantly better phosphate adsorption performance and faster removal rate, as compared with the mesoporous adsorbent (M-SBA). Based on the Freundlich and Langmuir models, the phosphate adsorption capacity and the maximum adsorption capacity of MM-SBA were 7.99 mg P/g and 23.59 mg P/g, respectively. In the kinetic study of MM-SBA, over 95% of its final adsorption capacity reached in the first 1 min; whereas that of M-SBA was less than 79%.     

Hydrothermal synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of mesoporous anatase TiO2 nanopowders

Mesoporous anatase TiO₂ nanopowder was synthesized by hydrothermal method at 130 °C for 12 h. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), HRTEM, and Brunauer-Emmett-Teller (BET) surface area. The as-synthesized sample with narrow pore size distribution had average pore diameter about 3-4 nm. The specific BET surface area of the as-synthesized sample was about 193 m²/g. Mesoporous anatase TiO₂ nanopowders (prepared by this study) showed higher photocatalytic activity than the nanorods TiO₂, nanofibers TiO₂ mesoporous TiO₂, and commercial TiO₂ nanoparticles (P-25, JRC-01, and JRC-03). The solar energy conversion efficiency (η) of the cell using the mesoporous anatase TiO₂ was about 6.30% with the short-circuit current density (Jsc) of 13.28 mA/cm², the open-circuit voltage (Voc) of 0.702 V and the fill factor (ff) of 0.676; while η of the cell using P-25 reached 5.82% with Jsc of 12.74 mA/cm², Voc of 0.704 V and ff of 0.649.