Flexible Wire‐Shaped Supercapacitors in Parallel Double Helix Configuration with Stable Electrochemical Properties under Static/Dynamic Bending

Wire‐shaped flexible supercapacitors (SCs) have aroused much attention due to their small size, light weight, high flexibility, and deformability. However, the previously reported wire‐shaped SCs usually involve complex assembly processes, encounter potential structural instabilities, and the influence of dynamic bending on the electrochemical stability of wire‐shaped SCs is also not clear. Here, a parallel double helix wire‐shaped supercapacitor (PDWS) protocol has been developed with two symmetric titanium@MnO₂ fiber electrodes winded on a flexible nylon fiber by a simple and reliable process. The PDWSs show an operate voltage of 0.8 V, a high capacitance of 15.6 mF cm^–2 and an energy density of 1.4 µWh cm^–2. Due to rational structure design, the PDWSs demonstrate excellent mechanical and electrochemical stability under both static and dynamic deformations. Over 3500 bending cycles, 88.0% of the initial capacitance can still be retained. In terms of dynamic bending, it is found that the cyclic voltammetry curves show periodically fluctuations simultaneously with the bending frequency and the intensity of fluctuation increases with higher bending frequency, while the dynamic capacitance is almost not affected. With extraordinary mechanical flexibility and excellent electrochemical stability, the high performance PDWS is considered to be a promising power source for wearable electronics.     

Design of Novel Wearable,Stretchable, and Waterproof Cable‐Type Supercapacitors Based on High‐Performance Nickel Cobalt Sulfide‐Coated Etching‐Annealed Yarn Electrodes

Rapid advances in functional electronics bring tremendous demands on innovation toward effective designs of device structures. Yarn supercapacitors (SCs) show advantages of flexibility, knittability, and small size, and can be integrated into various electronic devices with low cost and high efficiency for energy storage. In this work, functionalized stainless steel yarns are developed to support active materials of positive and negative electrodes, which not only enhance capacitance of both electrodes but can also be designed into stretchable configurations. The as‐made asymmetric yarn SCs show a high energy density of 0.0487 mWh cm^?2 (10.19 mWh cm^?3) at a power density of 0.553 mW cm^?2 (129.1 mW cm^?3) and a specific capacitance of 127.2 mF cm^?2 under an operating voltage window of 1.7 V. The fabricated SC is then made into a stretchable configuration by a prestraining‐then‐releasing approach using polydimethylsiloxane (PDMS) tube, and its electrochemical performance can be well maintained when stretching up to a high strain of 100%. Moreover, the stretchable cable‐type SCs are stably workable under water‐immersed condition. The method opens up new ways for fabricating flexible, stretchable, and waterproof devices.     

Nano‐RuO2‐Decorated Holey Graphene Composite Fibers for Micro‐Supercapacitors with Ultrahigh Energy Density

Compactness and versatility of fiber‐based micro‐supercapacitors (FMSCs) make them promising for emerging wearable electronic devices as energy storage solutions. But, increasing the energy storage capacity of microscale fiber electrodes, while retaining their high power density, remains a significant challenge. Here, this issue is addressed by incorporating ultrahigh mass loading of ruthenium oxide (RuO₂) nanoparticles (up to 42.5 wt%) uniformly on nanocarbon‐based microfibers composed largely of holey reduced graphene oxide (HrGO) with a lower amount of single‐walled carbon nanotubes as nanospacers. This facile approach involes (1) space‐confined hydrothermal assembly of highly porous but 3D interconnected carbon structure, (2) impregnating wet carbon structures with aqueous Ru³⁺ ions, and (3) anchoring RuO₂ nanoparticles on HrGO surfaces. Solid‐state FMSCs assembled using those fibers demonstrate a specific volumetric capacitance of 199 F cm^?3 at 2 mV s^?1. Fabricated FMSCs also deliver an ultrahigh energy density of 27.3 mWh cm^?3, the highest among those reported for FMSCs to date. Furthermore, integrating 20 pieces of FMSCs with two commercial flexible solar cells as a self‐powering energy system, a light‐emitting diode panel can be lit up stably. The current work highlights the excellent potential of nano‐RuO₂‐decorated HrGO composite fibers for constructing micro‐supercapacitors with high energy density for wearable electronic devices.     

Flexible Zinc‐Ion Hybrid Fiber Capacitors with Ultrahigh Energy Density and Long Cycling Life for Wearable Electronics

Emerging wearable electronics require flexible energy storage devices with high volumetric energy and power densities. Fiber‐shaped capacitors (FCs) offer high power densities and excellent flexibility but low energy densities. Zn‐ion capacitors have high energy density and other advantages, such as low cost, nontoxicity, reversible Faradaic reaction, and broad operating voltage windows. However, Zn‐ion capacitors have not been applied in wearable electronics due to the use of liquid electrolytes. Here, the first quasisolid‐state Zn‐ion hybrid FC (ZnFC) based on three rationally designed components is demonstrated. First, hydrothermally assembled high surface area and conductive reduced graphene oxide/carbon nanotube composite fibers serve as capacitor‐type positive electrodes. Second, graphite fibers coated with a uniform Zn layer work as battery‐type negative electrodes. Third, a new neutral ZnSO₄‐filled polyacrylic acid hydrogel act as the quasisolid‐state electrolyte, which offers high ionic conductivity and excellent stretchability. The assembled ZnFC delivers a high energy density of 48.5 mWh cm^?3 at a power density of 179.9 mW cm^?3. Further, Zn dendrite formation that commonly happens under high current density is efficiently suppressed on the fiber electrode, leading to superior cycling stability. Multiple ZnFCs are integrated as flexible energy storage units to power wearable devices under different deformation conditions.     

Ultrahigh‐Areal‐Capacitance Flexible Supercapacitor Electrodes Enabled by Conformal P3MT on Horizontally Aligned Carbon‐Nanotube Arrays

Nanocarbon electronic conductors combined with pseudocapacitive materials, such as conducting polymers, display outstanding electrochemical properties and mechanical flexibility. These characteristics enable the fabrication of flexible electrodes for energy‐storage devices; that is, supercapacitors that are wearable or can be formed into shapes that are easily integrated into vehicle parts. To date, most nanocarbon materials such as nanofibers are randomly dispersed as a network in a flexible matrix. This morphology inhibits ion transport, particularly under the high current density necessary for devices requiring high power density. Novel flexible densified horizontally aligned carbon nanotube arrays (HACNTs) with controlled nanomorphology for improved ion transport are introduced and combined with conformally coated poly(3‐methylthiophene) (P3MT) conducting polymer to impart pseudocapacitance. The resulting P3MT/HACNT nanocomposite electrodes exhibit high areal capacitance of 3.1 F cm^?2 at 5 mA cm^?2, with areal capacitance remaining at 1.8 F cm^?2 even at a current density of 200 mA cm^?2. The asymmetric supercapacitor cell also delivers more than 1–2 orders of magnitude improvement in both areal energy and power density over state‐of‐the‐art cells. Furthermore, little change in cell performance is observed under high strain, demonstrating the mechanical and electrochemical stability of the electrodes.     

Vertically Oriented Graphene Nanoribbon Fibers for High‐Volumetric Energy Density All‐Solid‐State Asymmetric Supercapacitors

Graphene fiber based micro‐supercapacitors (GF micro‐SCs) have attracted great attention for their potential applications in portable and wearable electronics. However, due to strong π–π stacking of nanosheets for graphene fibers, the limited ion accessible surface area and slow ion diffusion rate leads to low specific capacitance and poor rate performance. Here, the authors report a strategy for the synthesis of a vertically oriented graphene nanoribbon fiber with highly exposed surface area through confined‐hydrothermal treatment of interconnected graphene oxide nanoribbons and consequent laser irradiation process. As a result, the as‐obtained fiber shows high length specific capacitance of 3.2 mF cm^?1 and volumetric capacitance of 234.8 F cm^?3 at 2 mV s^?1, as well as excellent rate capability and outstanding cycling performance (96% capacitance retention after 10 000 cycles). Moreover, an all‐solid‐state asymmetric supercapacitor based on graphene nanoribbon fiber as negative electrode and MnO₂ coated graphene ribbon fiber as positive electrode, shows high volumetric capacitance and energy density of 12.8 F cm^?3 and 5.7 mWh cm^?3 (normalized to the device volume), respectively, much higher than those of previously reported GF micro‐SCs, as well as a long cycle life with 88% of capacitance retention after 10 000 cycles.     

A Solid‐State Fibriform Supercapacitor Boosted by Host–Guest Hybridization between the Carbon Nanotube Scaffold and MXene Nanosheets

Fiber‐shaped supercapacitors with improved specific capacitance and high rate capability are a promising candidate as power supply for smart textiles. However, the synergistic interaction between conductive filaments and active nanomaterials remains a crucial challenge, especially when hydrothermal or electrochemical deposition is used to produce a core (fiber)–shell (active materials) fibrous structure. On the other hand, although 2D pseudocapacitive materials, e.g., Ti₃C₂T _x (MXene), have demonstrated high volumetric capacitance, high electrical conductivity, and hydrophilic characteristics, MXene‐based electrodes normally suffer from poor rate capability owing to the sheet restacking especially when the loading level is high and solid‐state gel is used as electrolyte. Herein, by hosting MXene nanosheets (Ti₃C₂T _x ) in the corridor of a scrolled carbon nanotube (CNT) scaffold, a MXene/CNT fiber with helical structure is successfully fabricated. These features offer open spaces for rapid ion diffusion and guarantee fast electron transport. The solid‐state supercapacitor based on such hybrid fibers with gel electrolyte coating exhibits a volumetric capacitance of 22.7 F cm⁻³ at 0.1 A cm⁻³ with capacitance retention of 84% at current density of 1.0 A cm⁻³ (19.1 F cm⁻³), improved volumetric energy density of 2.55 mWh cm⁻³ at the power density of 45.9 mW cm⁻³, and excellent mechanical robustness.     

A Flexible Ionic Liquid Gelled PVA‐Li2SO4 Polymer Electrolyte for Semi‐Solid‐State Supercapacitors

A novel high‐performance flexible gel polymer electrolyte (FGPE) for supercapacitors is prepared by a freeze‐drying method. In the presence of 1‐butyl‐3‐methylimidazolium chloride (BMIMCl) ionic liquid, Li₂SO₄ can easily be added into poly(vinyl alcohol) (PVA) aqueous solution over a large concentration range. The resultant FGPE demonstrates considerably high ionic conductivity (37 mS cm⁻¹) and a high fracture strain at 100% elongation at the optimal weight ratio of PVA:BMIMCl:Li₂SO₄ = 1:3:2.2. The supercapacitor fabricated with the resultant FGPE and activated carbon electrodes shows an electrode‐specific capacitance of 136 F g⁻¹ with a stable operating voltage of 1.5 V, a maximum energy density of 10.6 Wh kg⁻¹, and a power density of 3400 W kg⁻¹. Double supercapacitors in series can efficiently drive a light emitting diode (LED) bulb for over 5 min and the retention of the specific capacitance reaches 90% even after 3000 charge–discharge cycles. The ionic conductivity and charge–discharge behaviors of the resultant FGPE are not affected by bending up to 180°. The flexible supercapacitor device shows only a small capacitance loss of 18% after 1000 cycles of 135° bending.     

Freestanding Lamellar Porous Carbon Stacks for Low‐Temperature‐Foldable Supercapacitors

High‐performance supercapacitors (SCs) are important energy storage components for emerging wearable electronics. Rendering low‐temperature foldability to SCs is critically important when wearable devices are used in a cold environment. However, currently reported foldable SCs do not have a stable electrochemical performance at subzero temperatures, while those that are performing are not foldable. Herein, a freestanding pure‐carbon‐based porous electrode, namely, lamellar porous carbon stack (LPCS), is reported, which enables stable low‐temperature‐foldable SCs. The LPCS, which is fabricated with a simple vacuum filtration of a mixture of carbon fibers (CFs), holey reduced graphene oxides (HRGOs), and carbon nanotubes (CNTs), possesses a lamellar stacking of porous carbon thin sheets, in which the CFs act as the skeleton and the HRGOs and CNTs act as binders. The unique structure leads to excellent compression resilience, high foldability, and high electronic and ionic conductivity. SCs made with the LPCS electrodes and ionic liquid electrolyte show a high energy density (2.1 mWh cm^?2 at 2 mA cm^?2), low‐temperature long lifetime (95% capacity after 10 000 cycles at ?30 °C), and excellent low‐temperature foldability (86% capacity after 1000 folding cycles at ?30 °C).     

A Highly Stretchable and Real‐Time Healable Supercapacitor

In addition to a high specific capacitance, a large stretchability and self‐healing properties are also essential to improve the practicality and reliability of supercapacitors in portable and wearable electronics. However, the integration of multiple functions into one device remains challenging. Here, the construction of a highly stretchable and real‐time omni‐healable supercapacitor is demonstrated by sandwiching the polypyrrole‐incorporated gold nanoparticle/carbon nanotube (CNT)/poly(acrylamide) (GCP@PPy) hydrogel electrodes with a CNT‐free GCP (GP) hydrogel as the electrolyte and chemically soldering an Ag nanowire film to the hydrogel electrode as the current collector. The newly developed dynamic metal‐thiolate (M‐SR, M = Au, Ag) bond‐induced integrated configuration, with an intrinsically powerful electrode and electrolyte, enables the assembled supercapacitor to deliver an areal capacitance of 885 mF cm^?2 and an energy density of 123 µWh cm^?2, which are among the highest‐reported values for stretchable supercapacitors. Notably, the device exhibits a superhigh stretching strain of 800%, rapid optical healing capability, and significant real‐time healability during the charge–discharge process. The exceptional performance combined with the facile assembly method confirms this multifunctional device as the best performer among all the flexible supercapacitors reported to date.     

Conversion Synthesis of Self‐Standing Potassium Zinc Hexacyanoferrate Arrays as Cathodes for High‐Voltage Flexible Aqueous Rechargeable Sodium‐Ion Batteries

Prussian blue analogs exhibit great promise for applications in aqueous rechargeable sodium‐ion batteries (ARSIBs) due to their unique open framework and well‐defined discharge voltage plateau. However, traditional coprecipitation methods cannot prepare self‐standing electrodes to meet the needs of wearable energy storage devices. In this work, a water bath method is reported to grow microcube‐like K₂Zn₃(Fe(CN)₆)₂·9H₂O on carbon cloth (CC) using Zn nanosheet arrays as the zinc source and reducing agent, directly serving as a self‐standing cathode. Benefiting from fast ion diffusion and high conductivity, the cathode delivers a high areal capacity of 0.76 mAh cm^?2 at 0.5 mA cm^?2 and excellent capacity retention of 57.9% as the current density increases to 20 mA cm^?2. By coupling with NaTi₂(PO₄)₃ grown on CC as an anode, a quasi‐solid‐state flexible ARSIB with a high output voltage plateau of 1.6 V is successfully assembled, exhibiting a superior areal capacity of 0.56 mAh cm^?2 and energy density of 0.92 mWh cm^?2. In particular, the device shows admirable mechanical flexibility, maintaining 90.3% of initial capacity after 3000 bending cycles. This work is anticipated to open a new avenue for the rational design of self‐standing electrodes used in high‐voltage flexible ARSIBs.     

Synthesis of P‐Doped and NiCo‐Hybridized Graphene‐Based Fibers for Flexible Asymmetrical Solid‐State Micro‐Energy Storage Device

Fiber supercapacitors (FSCs) are promising energy storage devices in portable and wearable smart electronics. Currently, a major challenge for FSCs is simultaneously achieving high volumetric energy and power densities. Herein, the microscale fiber electrode is designed by using carbon fibers as substrates and capillary channels as microreactors to space‐confined hydrothermal assembling. As P‐doped graphene oxide/carbon fiber (PGO/CF) and NiCo₂O₄‐based graphene oxide/carbon fiber (NCGO/CF) electrodes are successfully prepared, their unique hybrid structures exhibit a satisfactory electrochemical performance. An all‐solid‐state PGO/CF//NCGO/CF flexible asymmetric fiber supercapacitor (AFSC) based on the PGO/CF as the negative electrode, NCGO/CF hybrid electrode as the positive electrode, and poly(vinyl alcohol)/potassium hydroxide as the electrolyte is successfully assembled. The AFSC device delivers a higher volumetric energy density of 36.77 mW h cm^?3 at a power density of 142.5 mW cm^?3. In addition, a double reference electrode system is adopted to analyze and reduce the IR drop, as well as effectively matching negative and positive electrodes, which is conducive for the optimization and improvement of energy density. For the AFSC device, its better flexibility and electrochemical properties create a promising potential for high‐performance micro‐supercapacitors. Furthermore, the introduction of the double reference electrode system provides an interesting method for the study on the electrochemical performances of two‐electrode systems.     

Coupling PEDOT on Mesoporous Vanadium Nitride Arrays for Advanced Flexible All‐Solid‐State Supercapacitors

Tailored construction of advanced flexible supercapacitors (SCs) is of great importance to the development of high‐performance wearable modern electronics. Herein, a facile combined wet chemical method to fabricate novel mesoporous vanadium nitride (VN) composite arrays coupled with poly(3,4‐ethylenedioxythiophene) (PEDOT) as flexible electrodes for all‐solid‐state SCs is reported. The mesoporous VN nanosheets arrays prepared by the hydrothermal–nitridation method are composed of cross‐linked nanoparticles of 10–50 nm. To enhance electrochemical stability, the VN is further coupled with electrodeposited PEDOT shell to form high‐quality VN/PEDOT flexible arrays. Benefiting from high intrinsic reactivity and enhanced structural stability, the designed VN/PEDOT flexible arrays exhibit a high specific capacitance of 226.2 F g^?1 at 1 A g^?1 and an excellent cycle stability with 91.5% capacity retention after 5000 cycles at 10 A g^?1. In addition, high energy/power density (48.36 Wh kg^?1 at 2 A g^?1 and 4 kW kg^?1 at 5 A g^?1) and notable cycling life (91.6% retention over 10 000 cycles) are also achieved in the assembled asymmetric flexible supercapacitor cell with commercial nickel–cobalt–aluminum ternary oxides cathode and VN/PEDOT anode. This research opens up a way for construction of advanced hybrid organic–inorganic electrodes for flexible energy storage.     

Waterproof,Ultrahigh Areal‐Capacitance,Wearable Supercapacitor Fabrics

High‐performance supercapacitors (SCs) are promising energy storage devices to meet the pressing demand for future wearable applications. Because the surface area of a human body is limited to 2 m², the key challenge in this field is how to realize a high areal capacitance for SCs, while achieving rapid charging, good capacitive retention, flexibility, and waterproofing. To address this challenge, low‐cost materials are used including multiwall carbon nanotube (MWCNT), reduced graphene oxide (RGO), and metallic textiles to fabricate composite fabric electrodes, in which MWCNT and RGO are alternatively vacuum‐filtrated directly onto Ni‐coated cotton fabrics. The composite fabric electrodes display typical electrical double layer capacitor behavior, and reach an ultrahigh areal capacitance up to 6.2 F cm^?2 at a high areal current density of 20 mA cm^?2. All‐solid‐state fabric‐type SC devices made with the composite fabric electrodes and water‐repellent treatment can reach record‐breaking performance of 2.7 F cm^?2 at 20 mA cm^?2 at the first charge–discharge cycle, 3.2 F cm^?2 after 10 000 charge–discharge cycles, zero capacitive decay after 10 000 bending tests, and 10 h continuous underwater operation. The SC devices are easy to assemble into tandem structures and integrate into garments by simple sewing.     

Printable Fabrication of Nanocoral‐Structured Electrodes for High‐Performance Flexible and Planar Supercapacitor with Artistic Design

Planar supercapacitors with high flexibility, desirable operation safety, and high performance are considered as attractive candidates to serve as energy‐storage devices for portable and wearable electronics. Here, a scalable and printable technique is adopted to construct novel and unique hierarchical nanocoral structures as the interdigitated electrodes on flexible substrates. The as‐fabricated flexible all‐solid‐state planar supercapacitors with nanocoral structures achieve areal capacitance up to 52.9 mF cm^?2, which is 2.5 times that of devices without nanocoral structures, and this figure‐of‐merit is among the highest in the literature for the same category of devices. More interestingly, due to utilization of the inkjet‐printing technique, excellent versatility on electrode‐pattern artistic design is achieved. Particularly, working supercapacitors with artistically designed patterns are demonstrated. Meanwhile, the high scalability of such a printable method is also demonstrated by fabrication of large‐sized artistic supercapacitors serving as energy‐storage devices in a wearable self‐powered system as a proof of concept.     

High‐Performance Two‐Ply Yarn Supercapacitors Based on Carbon Nanotube Yarns Dotted with Co3O4 and NiO Nanoparticles

Yarn supercapacitors are promising power sources for flexible electronic applications that require conventional fabric‐like durability and wearer comfort. Carbon nanotube (CNT) yarn is an attractive choice for constructing yarn supercapacitors used in wearable textiles because of its high strength and flexibility. However, low capacitance and energy density limits the use of pure CNT yarn in wearable high‐energy density devices. Here, transitional metal oxide pseudocapacitive materials NiO and Co₃O₄ are deposited on as‐spun CNT yarn surface using a simple electrodeposition process. The Co₃O₄ deposited on the CNT yarn surface forms a uniform hybridized CNT@Co₃O₄ layer. The two‐ply supercapacitors formed from the CNT@Co₃O₄ composite yarns display excellent electrochemical properties with very high capacitance of 52.6 mF cm^?2 and energy density of 1.10 μWh cm^?2. The high performance two‐ply CNT@Co₃O₄ yarn supercapacitors are mechanically and electrochemically robust to meet the high performance requirements of power sources for wearable electronics.     

Vertically Aligned Graphene–Carbon Fiber Hybrid Electrodes with Superlong Cycling Stability for Flexible Supercapacitors

Graphene electrode–based supercapacitors are in high demand due to their superior electrochemical characteristics. A major bottleneck of using the supercapacitors for commercial applications lies in their inferior electrode cycle life. Herein, a simple and facile method to fabricate highly efficient supercapacitor electrodes using pristine graphene sheets vertically stacked and electrically connected to the carbon fibers which can result in vertically aligned graphene–carbon fiber nanostructure is developed. The vertically aligned graphene–carbon fiber electrode prepared by electrophoretic deposition possesses a mesoporous 3D architecture which enabled faster and efficient electrolyte‐ion diffusion with a gravimetric capacitance of 333.3 F g^?1 and an areal capacitance of 166 mF cm^?2. The electrodes displayed superlong electrochemical cycling stability of more than 100 000 cycles with 100% capacitance retention hence promising for long‐lasting supercapacitors. Apart from the electrochemical double layer charge storage, the oxygen‐containing surface moieties and α‐Ni(OH)₂ present on the graphene sheets enhance the charge storage by faradaic reactions. This enables the assembled device to provide an excellent gravimetric energy density of 76 W h kg^?1 with a 100% capacitance retention even after 1000 bending cycles. This study opens the door for developing high‐performing flexible graphene electrodes for wearable energy storage applications.     

Achieving Ultrahigh Energy Density and Long Durability in a Flexible Rechargeable Quasi‐Solid‐State Zn–MnO2 Battery

Advanced flexible batteries with high energy density and long cycle life are an important research target. Herein, the first paradigm of a high‐performance and stable flexible rechargeable quasi‐solid‐state Zn–MnO₂ battery is constructed by engineering MnO₂ electrodes and gel electrolyte. Benefiting from a poly(3,4‐ethylenedioxythiophene) (PEDOT) buffer layer and a Mn²⁺‐based neutral electrolyte, the fabricated Zn–MnO₂@PEDOT battery presents a remarkable capacity of 366.6 mA h g^?1 and good cycling performance (83.7% after 300 cycles) in aqueous electrolyte. More importantly, when using PVA/ZnCl₂/MnSO₄ gel as electrolyte, the as‐fabricated quasi‐solid‐state Zn–MnO₂@PEDOT battery remains highly rechargeable, maintaining more than 77.7% of its initial capacity and nearly 100% Coulombic efficiency after 300 cycles. Moreover, this flexible quasi‐solid‐state Zn–MnO₂ battery achieves an admirable energy density of 504.9 W h kg^?1 (33.95 mW h cm^?3), together with a peak power density of 8.6 kW kg^?1, substantially higher than most recently reported flexible energy‐storage devices. With the merits of impressive energy density and durability, this highly flexible rechargeable Zn–MnO₂ battery opens new opportunities for powering portable and wearable electronics.     

Hierarchical 3D All‐Carbon Composite Structure Modified with N‐Doped Graphene Quantum Dots for High‐Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all‐carbon electrode materials are prepared by assembling N‐doped graphene quantum dots (N‐GQDs) on carbonized MOF materials (cZIF‐8) interweaved with carbon nanotubes (CNTs) for flexible all‐solid‐state supercapacitors. In this ternary electrode, cZIF‐8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N‐GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N‐GQD@cZIF‐8/CNT electrodes exhibit a high specific capacitance of 540 F g^?1 at 0.5 A g^?1 in a 1 m H₂SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^?1 with a power density of 108.7 W kg^?1. Meanwhile, three supercapacitors connected in series can power light‐emitting diodes for 20 min. All‐solid‐state N‐GQD@cZIF‐8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^?1 with a power density of 89.3 W kg^?1, while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high‐performance energy storage devices via the rational design.     

Aluminum‐Ion‐Intercalation Supercapacitors with Ultrahigh Areal Capacitance and Highly Enhanced Cycling Stability: Power Supply for Flexible Electrochromic Devices

Electrochemical capacitor systems based on Al ions can offer the possibilities of low cost and high safety, together with a three‐electron redox‐mechanism‐based high capacity, and thus are expected to provide a feasible solution to meet ever‐increasing energy demands. Here, highly efficient Al‐ion intercalation into W₁₈O₄₉ nanowires (W₁₈O₄₉NWs) with wide lattice spacing and layered single‐crystal structure for electrochemical storage is demonstrated. Moreover, a freestanding composite film with a hierarchical porous structure is prepared through vacuum‐assisted filtration of a mixed dispersion containing W₁₈O₄₉NWs and single‐walled carbon nanotubes. The as‐prepared composite electrode exhibits extremely high areal capacitances of 1.11–2.92 F cm^?2 and 459 F cm^?3 at 2 mA cm^?2, enhanced electrochemical stability in the Al³⁺ electrolyte, as well as excellent mechanical properties. An Al‐ion‐based, flexible, asymmetric electrochemical capacitor is assembled that displays a high volumetric energy density of 19.0 mWh cm^?3 at a high power density of 295 mW cm^?3. Finally, the Al‐ion‐based asymmetric supercapacitor is used as the power source for poly(3‐hexylthiophene)‐based electrochromic devices, demonstrating their promising capability in flexible electronic devices.