Spray-dried solid dispersions containing ferulic acid: comparative analysis of three carriers,in vitro dissolution,antioxidant potential and in vivo anti-platelet effect

This article aimed to improve the relative solubility and dissolution rate of ferulic acid (FA) by the use of spray-dried solid dispersions (SDs) in order to ensure its in vitro antioxidant potential and to enhance its in vivo anti-platelet effect. These SDs were prepared by spray-drying at 10 and 20% of drug concentration using polyvinylpyrrolidone K30 (PVP-K30), polyethylene glycol 6000 (PEG 6000) and poloxamer-188 (PLX-188) as carriers. SDs and physical mixtures (PM) were characterized by SEM, XRPD, FTIR spectroscopy and TGA analysis. Spray-dried SDs containing FA were successfully obtained. Relative solubility of FA was improved with increasing carrier concentration. PVP-K30 and PEG 6000 formulations showed suitable drug content values close to 100%, whereas PLX-188 presented mean values between 70 and 90%. Agglomerates were observed depending on the carrier used. XRPD patterns and thermograms indicated that spray-drying led to drug amorphization and provided appropriate thermal stability, respectively. FTIR spectra demonstrated no remarkable interaction between carrier and drug for PEG 6000 and PLX-188 SDs. PVP-K30 formulations had changes in FTIR spectra, which denoted intermolecular O–H???O?=?C bonds. Spray-dried SDs played an important role in enhancing dissolution rate of FA when compared to pure drug. The free radical-scavenging assay confirmed that the antioxidant activity of PEG 6000 10% SDs was kept. This formulation also provided a statistically increased in vivo anti-platelet effect compared to pure drug. In summary, these formulations enhanced relative solubility and dissolution rate of FA and chosen formulation demonstrated suitable in vitro antioxidant activity and improved in vivo anti-platelet effect.     

Enhanced dissolution of ibuprofen using solid dispersion with polyethylene glycol 20000

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared in a relatively easy and simple manner, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility and in vitro drug release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting toward the lower melting temperature of the drug peak in SDs in DSC study indicated the possibilities of drug-polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C(max), and a significant decrease in T(max) over pure ibuprofen. Preliminary results from this study suggested that the preparation of fast dissolving ibuprofen SDs by low-temperature melting method using polyethylene glycol 20000 as a meltable hydrophilic polymer carrier could be a promising approach to improve solubility, dissolution, and absorption rate of ibuprofen.     

Physicochemical characterization of gliclazide–macrogol solid dispersion and tablets based on optimized dispersion

Background: This study investigated the physical interaction of gliclazide (GLC) with a hydrophilic carrier, that is, macrogol [polyethylene glycol (PEG)]. Different molecular weights of PEG (4000, 10,000, and 20,000) were used in different drug : carrier weight ratios (1 : 1, 1 : 2, 1 : 5, and 1 : 10). Method: Preliminary screening was done by phase solubility studies to characterize the liquid state interaction between the drug and the carrier. Solid dispersions (SDs) of GLC and PEG in different ratios were prepared by fusion technique and by physical mixing. The solid-state interaction between the drug and the carrier was examined by performing differential scanning calorimetry and Fourier transform infrared spectroscopic studies. SD with satisfactory characteristics was selected for the formulation of tablets by wet granulation method and compared with the commercial brand for in vitro dissolution. Results: It was evident from phase solubility studies that the drug solubility increased linearly with increasing PEG concentrations. In vitro dissolution of GLC improved significantly in the SDs prepared by fusion method as compared with the original drug and physical mixtures. Scanning electron microscopy images showed well-defined changes in the surface topography of GLC, thus confirming the effective formation of a fused binary system. The SD tablets showed a significant improvement in the drug release profile than that of the commercial brand. Conclusion: It was thus concluded that SD formulations of GLC can be successfully used to design a solid dosage form of the drug, which would have significant advantages over the current marketed tablets.     

Enhanced Dissolution of Ibuprofen Using Solid Dispersion with Polyethylene Glycol 20000

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared in a relatively easy and simple manner, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility and in vitro drug release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting toward the lower melting temperature of the drug peak in SDs in DSC study indicated the possibilities of drug–polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C_max, and a significant decrease in T_max over pure ibuprofen. Preliminary results from this study suggested that the preparation of fast dissolving ibuprofen SDs by low-temperature melting method using polyethylene glycol 20000 as a meltable hydrophilic polymer carrier could be a promising approach to improve solubility, dissolution, and absorption rate of ibuprofen.     

Evaluation of solid dispersions of Clofazimine

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Solubility and dissolution performances of spray-dried solid dispersion of Efavirenz in Soluplus

Abstract

Efavirenz (EFV), a first-line anti-HIV drug largely used as part of antiretroviral therapies, is practically insoluble in water and belongs to BCS class II (low solubility/high permeability). The aim of this study was to improve the solubility and dissolution performances of EFV by formulating an amorphous solid dispersion of the drug in polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®) using spray-drying technique. To this purpose, spray-dried dispersions of EFV in Soluplus^® at different mass ratios (1:1.25, 1:7, 1:10) were prepared and characterized using particle size measurements, SEM, XRD, DSC, FTIR and Raman microscopy mapping. Solubility and dissolution were determined in different media. Stability was studied at accelerated conditions (40?°C/75% RH) and ambient conditions for 12 months. DSC and XRD analyses confirmed the EFV amorphous state. FTIR spectroscopy analyses revealed possible drug–polymer molecular interaction. Solubility and dissolution rate of EFV was enhanced remarkably in the developed spray-dried solid dispersions, as a function of the polymer concentration. Spray-drying was concluded to be a proper technique to formulate a physically stable dispersion of amorphous EFV in Soluplus^®, when protected from moisture.     

Effect of semicrystalline copolymers in solid dispersions of pioglitazone hydrochloride: in vitro-in vivo correlation

Objective: The study was aimed to improve the dissolution and bioavailability of developed stable amorphous solid dispersions (SDs) of pioglitazone hydrochloride (PGH), a poorly water-soluble drug.

Significance: Poor aqueous solubility of PGH was overcome by the design of SDs. Level A correlation demonstrated between in vitro release and bioavailability of PGH, suggest its biowaiver potential.

Methods: The effects of semicrystalline copolymers (poloxamer 407 and gelucire 50/13) and methods of preparations on dissolution behavior, in vivo performance, and stability of PGH SDs were investigated. All the SDs were characterized by FTIR, TGA, DSC, XRD, and SEM.

Results: FTIR and TGA showed the compatibility with the polymers. The significant change in melting pattern of the PGH observed in the DSC thermograms supported by XRD patterns & SEM indicated a change from a crystalline to an amorphous state. Gelucire 50/13 was observed to have greater ability to form SDs than poloxamer 407 in solvent evaporation method (SM). Prevention of recrystallization during storage suggested stability of the formulation. Gelucire 50/13 based SD, prepared by SM remarkably increased the dissolution within 15?min (87.27?±?2.25%) and was supported by dissolution parameters (Q₁₅, IDR, RDR, % DE, f₁, f₂). These SDs showed pH-dependent solubility. In vivo test showed significantly (p?<?.05) higher AUC_0–t and C_max, which were about 3.17 and 4.34 times that of the pure drug respectively.

Conclusion: Gelucire 50/13 was found to be a suitable carrier for SM for preparation of SDs of PGH as evident from increased dissolution and bioavailability.     

Evaluation of Solid Dispersions of Clofazimine

ABSTRACT

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Effect of water-soluble carriers on dissolution characteristics of nifedipine solid dispersions

Solid dispersions of nifedipine (NP) with polyethylene glycols (PEG4000 and PEG6000), hydroxypropyl-β-cyclodextrin (HPβCD), and poloxamer 407 (PXM 407) in four mixing ratios were prepared by melting, solvent, and kneading methods in order to improve the dissolution of NP. The enhancement of the dissolution rate and the time for 80% NP dissolution T_80% depended on the mixing ratio and the preparation method. The highest dissolution rate and the T_80% as short as 15 min were obtained from PXM 407 solid dispersion prepared by the melting method at the mixing ratio of 1:10. The X-ray diffraction (XRD) patterns of solid dispersions at higher proportions of carriers demonstrated consistent with the results from differential scanning calorimetric (DSC) thermograms that NP existed in the amorphous state. The wettability and solubility were markedly improved in the PXM 407 system. The presence of intermolecular hydrogen bonding between NP and PEGs and between HPβCD and PXM 407 was shown by infrared (IR) spectroscopy.     

Solid carriers for improved solubility of glipizide in osmotically controlled oral drug delivery system

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli-PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli-PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli-PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Incorporation of paclitaxel solid dispersions with poloxamer188 or polyethylene glycol to tune drug release from poly(ϵ-caprolactone) films

Here we report the application of solid dispersion (SD) technique to improve paclitaxel (PTX) release from poly(?-caprolactone) (PCL)-based film. Paclitaxel solid dispersions (SDs) with either poloxamer188 (PXM) or polyethylene glycol (PEG) were successfully prepared by a melting method and then incorporated into PCL films, which were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and In vitro drug release/dissolution studies. It was found that PTX was faster released from the SDs than the corresponding physical mixtures (PMs) or PTX alone. For the PCL films with almost the same PTX loading, drug release from films containing SDs was remarkably faster than that from the film directly incorporated with PTX particles, and the films containing SDs with PXM exhibited a faster drug release than those with PEG. An increase In the content of PXM had no significant influence on PTX release from the films containing SDs. Incorporation of a higher content of SDs led to slower drug release from PCL films, indicating that PTX loading had a dominating effect on drug release. Through this study, we demonstrated the feasibility of the application of SD technique on the improvement of PTX release from PCL films and offered some beneficial information on modulating drug release behavior by changing the compositions and contents of the SDs-loaded PCL films.     

Solid Carriers for Improved Solubility of Glipizide in Osmotically Controlled Oral Drug Delivery System

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli–PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli–PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli–PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Study of a novel disintegrable oleanolic acid-polyvinylpolypyrrolidone solid dispersion

Novel solid dispersions of oleanolic acid-polyvinylpolypyrrolidone (OLA-PVPP SDs) were designed and prepared to improve the apparent solubility of drug, as well as to improve the stability, fluidity and compressibility of SDs. Disintegrable OLA-PVPP SDs were then evaluated both in vitro and in vivo. DSC, XRD, IR and SEM analysis proved the formation of OLA-PVPP SD and its amorphous state. The results of fluidity study, moisture absorption test and stability test showed that OLA-PVPP SD with good fluidity and qualified stability was successfully obtained. Meanwhile excellent dissolution rate was achieved for in vitro studies; dissolution test showed that ～50–75% of OLA was dissolved from SDs within the first 10?min, which is about 10–15 times of free OLA. In vivo study indicated that the formation of solid dispersion could largely improve the absorption of OLA, resulting in a much shorter T_max (p?C_max (p?0→∞ of OLA-PVPP SDs (1:6) were 155.4?±?37.24?h·ng/mL compared to the 103.11?±?26.69?h·ng/mL and 94.92?±?13.05?h·ng/mL of OLA-PVPP physical mixture (1:6) and free OLA, respectively. These proved PVPP could be a promising carrier of solid dispersions and was industrially feasible alternative carrier in the manufacture of solid dispersions.     

Preparation and characterization of solid dispersions of dipyridamole with a carrier "copolyvidonum Plasdone S-630"

Solid dispersions (SDs) of dipyridamole (DIP) with a novel carrier copolyvidonum Plasdone®S-630 (CoPVP) were developed by solvent evaporation method. The solid state of SDs of DIP with CoPVP (SDs CoPVP) was characterized by fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarizing microscopy, compared with that of SDs of DIP with polyvinylpyrrolidone Plasdone®K-29/32 (SDs PVP). FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between DIP and CoPVP or PVP in SDs. DSC and XRD studies indicated that DIP presented in amorphous state in both SDs CoPVP and SDs PVP at higher weight ratios. The dissolution property of SDs CoPVP was significantly improved in comparison of pure DIP and physical mixtures with CoPVP (PM CoPVP). Both SDs CoPVP and SDs PVP powder showed the favorable flowability. However, SDs CoPVP showed better compressibility than SDs PVP. The lower hydroscopicity of SDs CoPVP could be advantageous to the stability to SDs. This study proves the potential of CoPVP as a carrier in the formulations of SDs for poorly soluble drugs.     

Preparation and Characterization of Solid Dispersions of Dipyridamole with a Carrier “Copolyvidonum Plasdone®S-630”

Solid dispersions (SDs) of dipyridamole (DIP) with a novel carrier copolyvidonum Plasdone®S-630 (CoPVP) were developed by solvent evaporation method. The solid state of SDs of DIP with CoPVP (SDs CoPVP) was characterized by fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarizing microscopy, compared with that of SDs of DIP with polyvinylpyrrolidone Plasdone®K-29/32 (SDs PVP). FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between DIP and CoPVP or PVP in SDs. DSC and XRD studies indicated that DIP presented in amorphous state in both SDs CoPVP and SDs PVP at higher weight ratios. The dissolution property of SDs CoPVP was significantly improved in comparison of pure DIP and physical mixtures with CoPVP (PM CoPVP). Both SDs CoPVP and SDs PVP powder showed the favorable flowability. However, SDs CoPVP showed better compressibility than SDs PVP. The lower hydroscopicity of SDs CoPVP could be advantageous to the stability to SDs. This study proves the potential of CoPVP as a carrier in the formulations of SDs for poorly soluble drugs.     

Improved stability of solid dispersions of manidipine with polyethylene glycol 4000/copovidone blends: application of ternary phase diagram

Context: Manidipine (MDP) is generally used clinically as an antihypertensive agent; however, the bioavailability of orally administered MDP is limited due to their very low water solubility.

Objective: The objectives of this research were, therefore, to increase the solubility of MDP by the formation of ternary solid dispersions (tSD) with polyethylene glycol 4000 (PEG4000) and copovidone and to improve their stability.

Methods: Solid ternary phase diagram was constructed to find homogeneous solid dispersion region after melting and solidifying at low temperature with different quenching substances. The pulverized powder of solid dispersions was then determined, for their physicochemical properties, by differential scanning calorimetry, powder X-ray diffractometry, Fourier transform infrared (FTIR) spectroscopy and hot stage microscopy. The solubility and dissolution of MDP from the tSD were investigated. The physical stability of tSD was also determined under accelerated condition at 40?°C/75% relative humidity (RH) for 6 months.

Results and discussion: The results showed that MDP was molecularly dispersed in PEG4000 and copovidone when the tSD was created from homogeneous region of solid ternary phase diagram. FTIR results confirmed that strong hydrogen bonding was presented between MDP and copovidone, leading to a significant increase in the solubility and dissolution of MDP. After storage at accelerated condition (40?°C/75%RH) for 6 months, the tSD still showed a good appearance and high solubility.

Conclusion: The results of this study suggest that tSD prepared by melting has promising potential for oral administration and may be an efficacious approach for improving the therapeutic potential of MDP.     

Enhancement of docetaxel solubility using binary and ternary solid dispersion systems

Context: Poor biopharmaceutical properties and toxicities associated with the intravenous formulation of docetaxel (DTX) necessitate the exploration of an alternate oral route of delivery.

Objective: This study aims at enhancing the solubility of poorly soluble drug, DTX with the help of solid dispersion (SD) technique.

Method: DTX SDs were formulated with selected solubilizers, including Kollidon 12PF, Lutrol F68, Soluplus and Hydroxypropyl-β-cyclodextrin in different weight ratios. Freeze-drying method was used to prepare the binary and ternary SDs. Kinetic solubility of the SDs was evaluated in order to select best DTX-solubilizer combination. Best performing combination was then characterized using differential scanning calorimeter (DSC), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM).

Results and Discussion: Among all SDs tested, Soluplus outperformed all the excipients at equivalent weight ratio. Binary SD of DTX and Soluplus (1:10) resulted in the highest improvement in solubility (362.93?±?11.01?µg/mL). This is approximately a 93-fold increment as compared to the solubility of crystalline DTX (3.9?±?0.2?µg/mL). This exceptional performance can be attributed to solid-state transformation as well as micellization.

Conclusion: Among all the excipients tested, Soluplus dispersion is the most promising candidate for oral formulation development.     

Enhanced Dissolution of Ursodeoxycholic Acid from the Solid Dispersion

Abstract

Solid dispersions of a very slightly water-solubte drug, ursodeoxycholic acid (UDCA), were prepared using urea, mannitol, and PEG 6000 as a carrier, and the solubility of UDCA was determined in water-ethanol (1:1) mixed solvent as a function of UDCA-carrier ratio. The solubility of UDCA was slightly improved when urea or PEG 6000 was used as a carrier. The powder x-ray diffraction measurements revealed that UDCA did not exist in the crystalline state in the solid dispersions. Differential scanning calorimetry (DSC) studies showed that UDCA was able to dissolve in the melt of urea, mannitol, and PEG 6000. The effect of carriers of solid dispersions on the UDCA dissolution rate was examined. The dissolution rate of UDCA was markedly increased from the solid dispersions of urea, PEG 6000, and mannitol, respectively.     

Enhanced Dissolution of Ursodeoxycholic Acid from the Solid Dispersion

Solid dispersions of a very slightly water-solubte drug, ursodeoxycholic acid (UDCA), were prepared using urea, mannitol, and PEG 6000 as a carrier, and the solubility of UDCA was determined in water-ethanol (1:1) mixed solvent as a function of UDCA-carrier ratio. The solubility of UDCA was slightly improved when urea or PEG 6000 was used as a carrier. The powder x-ray diffraction measurements revealed that UDCA did not exist in the crystalline state in the solid dispersions. Differential scanning calorimetry (DSC) studies showed that UDCA was able to dissolve in the melt of urea, mannitol, and PEG 6000. The effect of carriers of solid dispersions on the UDCA dissolution rate was examined. The dissolution rate of UDCA was markedly increased from the solid dispersions of urea, PEG 6000, and mannitol, respectively.     

Cyclodextrin nanosponges to enhance the dissolution profile of quercetin by inclusion complex formation

ABSTRACT

The therapeutic potential of quercetin is mostly hampered by its low water solubility and poor absorption. The aim of this study was to enhance the dissolution rate of quercetin by molecular encapsulation with cyclodextrin nanosponges. The inclusion complexes were obtained by freeze-drying method. Inclusion complexes were characterized by Fourier Transformed Infrared Spectroscopy (FTIR), x-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), transmission electron microscopy (TEM), and dissolution testing. FTIR, XRD, and DSC studies confirmed the interactions of quercetin with nanosponges. TEM images revealed the spherical morphology of complexes. The dissolution of the drug nanosponge complex was significantly higher compared with the pure drug in simulated intestinal fluid (SIF; pH 6.8). The results indicated that the degree of cross-linking has the significant influence on dissolution. Nanosponges with lower degree of cross-linking released 91% of the drug within 45 min, whereas nanosponges with higher degree of cross-linking resulted in sustained release up to 24 h.