Preparation and properties of one‐pack polybenzoxazine‐modified polyurethanes with improved thermal stability and electrical insulating properties

A novel method has been developed for the combination of polyurethanes and polybenzoxazines. For this purpose, firstly, p‐nitrophenol blocked polyurethanes (BPUs) were prepared via the reaction of poly(tetramethylene ether) glycol of various molecular weights, 2,4‐tolylene diisocyanate and p‐nitrophenol. The BPUs were then mixed with 2,2‐bis(3,4‐dihydro‐3‐phenyl‐2H‐1,3‐benzoxazine)propane (Ba) at various weight ratios. To prepare poly(urethane‐co‐benzoxazine) networks, the BPU/Ba mixtures were subjected to a heating programme derived from detailed differential scanning calorimetry and gel content measurements. Results showed about 30 to 40 °C reduction of polymerization temperature for complete curing of BPU/Ba mixtures in comparison to neat Ba. This phenomenon was related to catalytic action of librated p‐nitrophenol molecules. The thermal, mechanical, viscoelastic and electrical properties of prepared thermoset polymers were measured and correlated with their chemical structures. A significant improvement of thermal stability and dielectric strength in comparison to neat polyurethanes was found. Also, enhancement of tensile properties, ease of curing and ability to be transformed into thin films are fascinating features of these newly developed materials in comparison to neat polybenzoxazines. Therefore, these polymers have potential applicability as high‐performance materials in modern electrical industries. Copyright © 2010 Society of Chemical Industry     

Step‐growth polymerization of 5‐[(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido)‐3‐methylbutanoyl‐amino]isophthalic acid with aromatic diols

cis‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboxylic acid anhydride ( 1 ) was converted to imide acid ( 2 ) by reaction with S‐valine. Compound 2 was converted to the acid chloride ( 3 ) by reaction with thionyl chloride and then treated with 5‐aminoisophthalic acid in dry N,N‐dimethylacetamide to obtain 5‐[(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido)‐3‐methylbutanoylamino]isophthalic acid ( 4 ). Direct step‐growth polymerization of this novel chiral diacid monomer 4 with a series of different diols in a system of tosyl chloride, pyridine, and N,N‐dimethylformamide was carried out. The optically active polyesters (PEs) were obtained with good yield and moderate inherent viscosity ranging from 0.23 to 0.48 dL/g. The resulting polymers were characterized with FTIR, ¹H‐NMR, and elemental analysis techniques. The prepared PEs showed good thermal stability up to 320°C as measured by thermogravimetric analysis. Specific rotation experiments demonstrated the induction of optical activity due to successful insertion of S‐valine in the structure of pendant groups. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Shape‐memory polyurethanes minimally crosslinked with hydroxyl‐terminated AB2‐type hyperbranched polyurethanes

A series of shape‐memory polyurethanes based on poly(ϵ‐caprolactone) diol were prepared with novel hydroxyl‐terminated hyperbranched polyurethanes as crosslinkers and were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, wide‐angle X‐ray diffraction, dynamic mechanical analysis, tensile testing, and shape‐memory testing. The molecular weight of the soluble polymers ranged from 5.1 × 10⁴ to 29.0 × 10⁴ g/mol. The differential scanning calorimetry and wide‐angle X‐ray diffraction data indicated that when the crystallinities of the crosslinked polymers were compared to that of linear polyurethane, this parameter was improved when the crosslinker was in low quantity. The storage modulus ratios obtained from the dynamic mechanical analyses data of the crosslinked polymers were also high compared to that of the linear polyurethane. As a result, crosslinked polymers showed better shape‐memory properties compared to the linear polyurethanes. Also, the that incorporation of the hyperbranched polymer as a crosslinker into the polyurethane chain improved the thermal and mechanical properties of the polymer. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and properties of new photosensitive and chiral poly(amide‐imide)s based on bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic diimide and dibenzalacetone moieties in the main chain

Aromatic poly(amide‐imide)s (PAIs) are high‐performance materials with a good compromise between thermal stability and processability when compared with polyamides or polyimides of analogous structures. In addition, the incorporation of photosensitive functional groups and chiral segments into the polymer backbone can lead to interesting polymers for various applications. In this work, six new photosensitive and chiral PAIs were synthesized from the direct polycondensation reaction of novel N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L ‐amino acids with 2,5‐bis(4‐aminobenzylidene)cyclopentanone as dibenzalacetone moiety using two different methods. The polymerization reactions produced a series of photosensitive and optically active PAIs in high yields and with good inherent viscosities. The resulting polymers were characterized using Fourier transform infrared and ¹H NMR spectroscopy, elemental analysis, inherent viscosity, specific rotation, solubility tests and UV‐visible spectroscopy. The thermal properties of the PAIs were investigated using thermogravimetric analysis. Due to the presence of the dibenzalacetone moiety in the polymer chain, the PAIs have photosensitive properties. Also, these PAIs are optically active and soluble in various organic solvents. These resulting new polymers have the potential to be used in column chromatography for the separation of enantiomeric mixtures. Copyright © 2009 Society of Chemical Industry     

Synthesis and nonlinear optical properties of novel y‐type polyurethanes containing different concentrations of chromophore

A new series of Y‐type polyurethanes containing different concentrations of nonlinear optical (NLO) chromophore with aniline donor and tricyanofurane (TCF) acceptor have been successfully prepared, and characterized by FTIR, UV‐Vis, and ¹H‐NMR spectra. New polyurethanes were synthesized with different chromophore contents by introducing diol N, N‐dihydroxyethylaniline or 4‐[N, N‐(dihydroxyethyl)amino]benzaldehyde. These NLO polyurethanes exhibit good film forming property and high thermal stability up to 281°C. The highest electro‐optic coefficient (r₃₃) of polymers is up to 39 pm V^?1 measured by simple reflection technique at 1310 nm, and the temporal stability of the poling‐induced order at elevated temperature of 80°C was much improved through the introducing of hydrogen bonding interaction in this system. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and structural characterization of novel chiral nanostructured poly(esterimide)s containing different natural amino acids and 4,4′‐thiobis(2‐tert‐butyl‐5‐methylphenol) linkages

Pyromellitic dianhydride (benzene‐1,2,4,5‐tetracarboxylic dianhydride) (1) was reacted with several amino acids in acetic acid and the resulting imide‐acid [N,N′‐(pyromellitoyl)‐bis‐L ‐amino acid diacid] (4a–4d) was obtained in high yield. The direct polycondensation reaction of these diacids with 4,4′‐thiobis(2‐tert‐butyl‐5‐methylphenol) (5) was carried out in a system of tosyl chloride(TsCl), pyridine, and N,N‐dimethyl formamide (DMF) to give a series of novel optically active poly(esterimide)s. Step‐growth polymerization was carried out by varying the time of heating and the molar ratio of TsCl/diacid, and the optimum conditions were achieved. These new chiral polymers were characterized with respect to chemical structure and purity by means of specific rotation experiments, FTIR, ¹H‐NMR, X‐ray diffraction, elemental, and thermogravimetric analysis (TGA) field emission scanning electron microscopy (FE‐SEM) techniques. These polymers are readily soluble in many polar organic solvents like DMF, N,N‐dimethyl acetamide, dimethyl sulfoxide, N‐methyl‐2‐pyrrolidone, and protic solvents such as sulfuric acid. TGA showed that the 10% weight loss temperature in a nitrogen atmosphere was more than 390°C; therefore, these new chiral polymers have useful levels of thermal stability associated with good solubility. Furthermore, study of the surface morphology of the obtained polymers by FE‐SEM showed that each polymers exhibit nanostructure morphology. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Infrared emissivity property study and conformational analysis of helical polysilane

Left and right single‐handed helical polysilane (L‐HPS and D‐HPS) and racemic helical polysilane (R‐HPS) were synthesized by the Wurtz‐type coupling reaction. The chiral dichloro(methoxycarbonyl ethyl propyl ether)methylsilane monomers applied in copolymerization were derived from methyl d /l ‐lactate. The obtained polymers were characterized by ¹H and ¹³C nuclear magnetic resonance, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, circular dichroism spectroscopy, gel permeation chromatography and X‐ray diffraction. Infrared emissivity (IRE) values were also investigated. Compared to R‐HPS, L‐HPS, and D‐HPS, a pair of mirror image, showed higher crystallinity, better thermal stability, and lower IRE (8–14 mm) at the values of 0.592 and 0.576, respectively. The higher regular secondary structure of HPSs was attributed to the formation of intermolecular hydrogen bonds. To further study the configurations of L‐HPS, D‐HPS, and R‐HPS, rotational isomeric state scheme with molecular dynamics simulation have been utilized. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46335.     

Polyaniline doped with α, ω‐alkanedisulfonic acids: preparation and characterization

The use of α, ω‐alkanedisulfonic acid, HO₃S(CH₂)_nSO₃H (n = 1, 4, 6 and 12), as a dopant for polyaniline (PANi) was investigated. This series of disulfonic acids with varying chain lengths were synthesized and used in the doping of PANi. The doped polymers showed conductivity in the range 10^?2 to 10^?1 S cm^?1. Thermal studies showed that the doped polymers, depending on the chain length of α,ω‐alkanedisulfonic acid, were stable up to ca 300 °C and the thermal stability decreased with increasing dopant chain length. The thermal stability of α,ω‐alkanedisulfonic acid‐doped PANi was higher than that of alkanesulfonic acid‐doped PANi which typically degrades around 250 °C, suggesting a moderately broader processing window for α,ω‐alkanedisulfonic acid‐doped PANi for blending with other thermoplastics. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Optical and thermal properties of diethyl‐(2R, 3R) (+)‐tartrate based chiral polyurethanes with main chain amido chromophores

The toluene diisocyanate based optically active chiral polyurethanes were synthesized according to the symmetry conditions. The noncentrosymmetric (both charge asymmetry and spatial asymmetry) environment were attained by the incorporation of the chiral units (diethyl‐(2R,3R)(+)‐tartrate) and donor‐acceptor building blocks in the main chain which induce a helical conformation in the macromolecular chain. A series of optically active polyurethanes containing chiral linkages in the polymer back bone have been synthesized by using DBTDL catalyst by incorporating the amido diols which were obtained by the aminolysis of ε‐caprolactone by using the diamines, diaminoethane, diaminobutane, and diaminohexane respectively. The effect of incorporation of the chiral molecule diethyl‐(2R,3R)(+)‐tartrate on the properties of polyurethanes was studied by changing the chromophores and also by varying the chiral‐chromophore composition. Various properties of polyurethanes were investigated by UV, Fluorescence, TG/DTA, XRD, polarimetric techniques, Kurtz‐Perry powder techniques, etc. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel poly(thiourea‐ether‐imide)s derived from 4,4′‐oxydiphenyl‐bis(thiourea): probing the possibility for high‐temperature applications

Our interest in the fabrication of high‐performance polyimides has led to thiourea‐substituted poly(thiourea‐ether‐imide)s (PTEIs) with good retention of thermal properties along with flame retardancy. A new aromatic monomer, 4,4′‐oxydiphenyl‐bis(thiourea) (ODPBT), was efficiently synthesized and polymerized with various dianhydrides (pyromellitic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 4,4′‐(hexafluoroisopropylidene)diphthalic dianhydride) via two‐stage chemical imidization to fabricate a series of PTEIs. The structural characterization of ODPBT and the polymers was carried out using Fourier transform infrared, ¹H NMR and ¹³C NMR spectral techniques along with crystallinity, organosolubility, inherent viscosity and gel permeation chromatographic measurements. PTEIs bearing C?S and ? O? moieties in the backbone demonstrated an amorphous nature and were readily soluble in various amide solvents. The novel polymers had inherent viscosities of 1.16–1.23 dL g^?1 and molecular weights of ca 90 783–96 927 g mol^?1. Their thermal stability was substantiated via 10% weight loss in the temperature range 516–530 °C under inert atmosphere. The polyimides had glass transition temperatures of 260–265 °C. Incorporation of thiourea functionalities into polymer backbones is demonstrated to be an effective way to enhance their thermal properties and flame retardancy. Thus, ODPBT can be considered as an excellent candidate for use in the synthesis of high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Optically active poly(ester‐amide)s: synthesis and characterization

The synthesis and characterization of a new series of chiral poly(ester‐amide)s are reported. They were prepared by the simple reaction of diacid chlorides with biphenolic azo chromophores and optically active dihydroxy compound (isosorbide) in dimethyl acetamide at 100 °C. The polymers containing isosorbide units were optically active. The polymers showed T_g between 100 and 190 °C and were stable up to 400 °C. These poly(ester‐amide)s showed a positive solvatochromism in UV–visible absorption spectra. Second harmonic generation activities were measured by the powder method. © 2001 Society of Chemical Industry     

Synthesis,spectral, and thermal characterization of photosensitive poly(ether–ester)s containing α,β‐unsaturated ketone moieties in the main chain derived from 2,6‐bis[4‐(3‐hydroxypropyloxy)‐3‐methoxybenzylidene]cyclohexanone

A series of photosensitive poly(ether–ester)s containing α,β‐unsaturated ketone moieties in the main chain were synthesized from 2,6‐bis[4‐(3‐hydroxypropyloxy)‐3‐methoxybenzylidene]cyclohexanone (BHPMBCH) and aliphatic and aromatic diacid chlorides. The diol precursor, BHPMBCH, was synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone and 3‐bromo‐1‐propanol. The solubility of the polymers was tested in various solvents. The intrinsic viscosity of the synthesized polymers, determined by an Oswald viscometer, was found to be 0.06–0.80 g/dL. The molecular structures of the monomer and polymers were confirmed by Fourier transform infrared, ultraviolet–visible, ¹H‐NMR, and ¹³C‐NMR spectral analyses. The thermal properties were studied with thermogravimetric analysis and differential scanning calorimetry. The thermogravimetric analysis data revealed that the polymers were stable up to 220°C and started degrading thereafter. The thermal stability initially increased with increasing spacer length and then decreased due to negative effects of the spacer. The self‐extinguishing properties of the synthesized polymers were studied by the determination of the limiting oxygen index values with Van Krevelen's equation. In addition, the photocrosslinking properties of the polymer chain were studied with UV spectroscopy, and we observed that the rate of photocrosslinking increased significantly with increasing methylene carbon chain length of the acid spacer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and acoustic properties of new soluble polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol

Eight novel polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)]diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol acting as hard segments with two aromatic and two aliphatic diisocyanates (4,4′‐diphenylmethane diisocyanate, toluene 2,4‐diisocyanate, isophorone diisocyanate, and hexamethylene diisocyanate) were prepared and characterized with Fourier transform infrared, UV spectrophotometry, fluorescence spectroscopy, ¹H‐NMR and ¹³C‐NMR spectroscopy, thermogravimetric analysis, and differential thermal analysis. All the polyurethanes contained domains of semicrystalline and amorphous structures, as indicated by X‐ray diffraction. The acoustic properties and solubility parameters were calculated with the group contribution method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Renewable resource modified polyol derived aliphatic hyperbranched polyurethane as a biodegradable and UV‐resistant smart material

Renewable resource tailored tough, elastomeric, biodegradable, smart aliphatic hyperbranched polyurethanes were synthesized using castor oil modified polyol containing fatty amide triol, glycerol, diethanolamine and monoglyceride of sunflower oil via an A_x + B_y (x , y ≥ 2) approach. To the best of our knowledge, this is the first report of the synthesis of solely aliphatic hyperbranched polyurethanes by employing renewable resources. The synthesized polyurethanes were characterized by Fourier transform infrared, NMR and XRD techniques. The hyperbranched polyurethanes exhibited good mechanical properties, especially elongation at break (668%), toughness (32.16 MJ m^?3) and impact resistance (19.02 kJ m^?1); also high thermal stability (above 300 °C) and good chemical resistance. Also, the hyperbranched polyurethanes were found to show adequate biodegradability and significant UV light resistance. Moreover, they demonstrated excellent multi‐stimuli‐driven shape recovery ability (up to 97%) under direct sunlight (10⁵ lux), thermal energy (50 °C) and microwave irradiation (450 W). The performance of the hyperbranched polyurethanes was compared with renewable resource based and synthetic linear polyurethane to judge the superiority of the hyperbranched architecture. Therefore, these new aliphatic macromolecules hold significant promise as smart materials for advanced applications. © 2017 Society of Chemical Industry     

Preparation and properties of flame-retardant polyphosphate esters: Low-temperature solution polycondensation of 3,3,′5,5′-tetrabromobisphenol AF and aryl phosphorodichloridates

This article describes the syntheses of aromatic polyphosphates from the reaction of various aryl phosphorodichloridates with 3,3′,5,5′-tetrabromobisphenol AF (TBPAF) in a chlorinated hydrocarbon solvent under low-temperature conditions. The new polyphosphates obtained were characterized by infrared, ¹³C and ³¹P nuclear magnetic resonance spectra, elemental analysis, inherent viscosity, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, limiting oxygen index, contact angle, and molar mass measurement. All of the polyphosphates obtained had high yields, and the inherent viscosities were in the range 0.12 - 0.15 dL g⁻¹. All of the polymers start degrading between 210 and 267°C and had 14 - 26% residual mass at 700°C in nitrogen. Polymer E, having a methoxy group in the side chain phenyl ring, showed better thermal stability than the other polymers. The X-ray diffraction patterns revealed that all of the polyphosphates were amorphous. These polyphosphates had glass transition temperatures between 140 and 154°C. Polymers obtained from TBPAF had excellent flame retardency, as indicated by high limiting oxygen index values in the range of 63 - 68. The water contact angles (θ_w) of all of the polyphosphates were in the range of 74 - 87°. The contact angles of polymers A and B were larger than those of other polyphosphates that contain more oxygen (polymers C and E) or bromine atoms (polymer D). © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 59–65, 1997     

Synthesis, characterization and infrared emissivity property of optically active polyurethane derived from tyrosine

Optically active polyurethanes (LPU and DPU) and racemic polyurethane (RPU) were synthesized by the self-polyaddition of the isocyanate-phenols which derived from the chiral and racemic tyrosine. All of the polymers were characterized by FT-IR, ¹H NMR, GPC, UV-Vis spectroscopy, circular dichroism (CD) spectroscopy, TGA and X-ray diffraction (XRD), and the infrared emissivity values were investigated in addition. LPU and DPU were two enantimorphs, they possessed helical configurations and higher degree of hydrogen bondings compared to the RPU which presented random coiled molecular chain. The crystallinity and thermal decomposition temperature of LPU and DPU were higher than that of the RPU due to the more regular secondary structure which facilitate the formation of a large number of inter-chain hydrogen bonds. Consequently, the LPU and DPU exhibited lower infrared emissivity values (8-14 μm), which came down to 0.611 and 0.625.     

Infrared radiation and thermal cyclic performance of a high-entropy rare-earth hexaaluminate coating prepared by atmospheric plasma spraying

In this study, a high-entropy RMgAl₁₁O₁₉ (HE-RMA, R = La, Pr, Nd, Sm, Gd) and LaMgAl₁₁O₁₉ (LMA) coatings were fabricated by atmospheric plasma spraying. The phase composition, microstructure, thermal stability, infrared emissivity performance and shock resistance were comparatively characterized. The results showed that doping multiple rare-earth cations could be conductive to enhance the infrared emissivity. The as-sprayed HE-RMA coating exhibited the highest infrared emissivity, which reached up to 0.971 at 1000 °C. The reason for the improvement of the infrared emissivity was attributed to introduced impurity energy level resulting from doping cations, which could reduce the forbidden bandwidth and increase probability of electronic transition. Meanwhile, HE-RMA coating exhibited better shock resistance at 1100 °C due to superior fracture toughness (1.84 ± 0.41 MPa·m^1/2) during thermal cycling test at 1100 °C. In addition, HE-RMA coating still exhibited high infrared emissivity (0.932 at 1000 °C) at 1100 °C annealing for 100 h with only a slight reduction.