A Hybrid Silica Nanoreactor Framework for Encapsulation of Hollow Manganese Oxide Nanoparticles of Superior T1 Magnetic Resonance Relaxivity

A new hybrid nanoreactor framework with poly(ethylene oxide)‐perforated silica walls is designed to encapsulate hollow manganese oxide nanoparticles (MONs) of high distinctness and homogeneity. Achieved by an interfacial templating scheme, the nanoreactor ensures that acidic etching of MONs by an acetate buffer solution is highly controlled for precise control of the hollow interior. As such, hollow MONs with different nanostructures are developed successfully through a facile acetate buffer solution etching. The resultant hollow MONs are integrated within the hybrid nanoreactor and demonstrate superior r₁ relativity of up to 2.58 mm ^?1 s^?1 for T₁ magnetic resonance imaging (MRI). By modifying the nanoreactor architecture, it is also demonstrated that the efficacy of MONs as T₁ MRI contrast agents can be significantly improved if an optimal cluster of hollow MONs is encapsulated into the hybrid silica framework. The evolution of core morphology with time is studied to elucidate the etching mechanism. It is revealed that the hollow formation arises due to the surface stabilization of MONs by acetate ions and the subsequent acidic etching of the interior core in a sporadic manner. This is different from the commonly reported nanoscale Kirkendall effect or the selective etching of the core–shell MnO/Mn₃O₄ structure.     

Synthesis of PEOlated Fe3O4@SiO2 Nanoparticles via Bioinspired Silification for Magnetic Resonance Imaging

Inspired by the biosilification process, a highly benign synthesis strategy is successfully developed to synthesize PEOlated Fe₃O₄@SiO₂ nanoparticles (PEOFSN) at room temperature and near‐neutral pH. The success of such a strategy lies in the simultaneous encapsulation of Fe₃O₄ nanocrystals and silica precursors into the core of PEO‐based polymeric micelles. The encapsulation results in the formation of a silica shell being confined to the interface between the core and corona of the Fe₃O₄‐nanocrystal‐loaded polymeric micelles. Consequently, the surface of the Fe₃O₄@SiO₂ nanoparticle is intrinsically covered by a layer of free PEO chains, which enable the PEOFSN to be colloidally stable not only at room temperature, but also upon incubation in the presence of proteins under physiological conditions. In addition, the silica shell formation does not cause any detrimental effects to the encapsulated Fe₃O₄ nanocrystals with respect to their size, morphology, crystallinity, and magnetic properties, as shown by their physicochemical behavior. The PEOFSN are shown to be good candidates for magnetic resonance imaging (MRI) contrast agents as demonstrated by the high r₂/r₁ ratio with long‐term stability under high magnetic field, as well as the lack of cytotoxicity.     

Biotemplated Synthesis of Gold Nanoparticle–Bacteria Cellulose Nanofiber Nanocomposites and Their Application in Biosensing

Bacteria cellulose (BC) nanofibers are used as robust biotemplates for the facile fabrication of novel gold nanoparticle (NP)–bacteria cellulose nanofiber (Au–BC) nanocomposites via a one‐step method. The BC nanofibers are uniformly coated with Au NPs in aqueous suspension using poly(ethyleneimine) (PEI) as the reducing and linking agent. With the addition of different halides, Au–BC nanocomposites with different Au shell thicknesses are formed, and a possible formation mechanism is proposed by taking into account the special role played by PEI. A novel H₂O₂ biosensor is constructed using the obtained Au–BC nanocomposites as excellent support for horseradish peroxidase (HRP) immobilization, which allows the detection of H₂O₂ with a detection limit lower than 1 µM . The Au–BC nanocomposites could be further used for the immobilization of many other enzymes, and thus, may find potential applications in bioelectroanalysis and bioelectrocatalysis.     

A Hollow‐Core,Magnetic, and Mesoporous Double‐Shell Nanostructure: In Situ Decomposition/Reduction Synthesis,Bioimaging, and Drug‐Delivery Properties

A novel in situ decomposition/reduction approach is developed to manu­facture hollow core, magnetic, and mesoporous double‐shell nanostructures (HMMNSs) via in situ decomposition and reduction of a β‐FeOOH nanorod core and organosilicate‐incorporated silica‐shell precursor. The formed HMMNSs are then aminated by silanization for further covalent conjugation to rhodamine B isothiocyanate (RBITC) and poly(ethylene glycol) (PEG) chains. The resultant RBITC‐grafted and PEGylated nanocomposites (HMMNS–R/Ps) have excellent blood compatibility and very low cytotoxicity towards HeLa and MCF‐7 cells, and can be taken up by cancer cells effectively in a dose‐dependent manner, as confirmed by in vitro flow cytometry, confocal luminescence imaging, and magnetic resonance imaging (MRI) studies. In vivo MRI studies coupled with Prussian blue staining of slides from different organs show that the nanocomposites preferentially accumulate in liver and spleen after intravenous injection, which suggests a potential application of the nanocomposites as MRI contrast agents. Importantly, the HMMNS–R/P nanocomposites show high loading capacity for water‐insoluble anticancer drugs (docetaxel or camptothecin) owing to the presence of a large inner cavity and enhanced surface area and pore volume. Furthermore, the drug‐loaded nanocomposites exhibit greater cytotoxicity than the corresponding free drugs. These results confirm that the HMMNS–R/P nanocomposites are promising candidates for simultaneous bioimaging and drug delivery.     

RGD‐Conjugated Nanoscale Coordination Polymers for Targeted T1‐ and T2‐weighted Magnetic Resonance Imaging of Tumors in Vivo

Development of multifunctional nanoscale coordination polymers (NCPs) allowing for T₁‐ and T₂‐weighted targeted magnetic resonance (MR) imaging of tumors could significantly improve the diagnosis accuracy. In this study, nanoscale coordination polymers (NCPs) with a diameter of ≈80 nm are obtained with 1,1′‐dicarboxyl ferrocene (Fc) as building blocks and magnetic gadolinium(III) ions as metallic nodes using a nanoprecipitation method, then further aminated through silanization. The amine‐functionalized Fc‐Gd@SiO₂ NCPs enable the covalent conjugation of a fluorescent rhodamine dye (RBITC) and an arginine‐glycine‐aspartic acid (RGD) peptide as a targeting ligand onto their surface. The formed water‐dispersible Fc‐Gd@SiO₂(RBITC)–RGD NCPs exhibit a low cytotoxicity, as confirmed by MTT assay. They have a longitudinal relaxivity (r₁) of 5.1 mM^?1 s^?1 and transversal relaxivity (r₂) of 21.7 mM^?1 s^?1, suggesting their possible use as both T₁‐positive and T₂‐negative contrast agents. In vivo MR imaging experiments show that the signal of tumor over‐expressing high affinity α_vβ₃ integrin from T₁‐weighted MR imaging is positively enhanced 47±5%, and negatively decreased 33±5% from T₂‐weighted MR imaging after intravenous injection of Fc‐Gd@SiO₂(RBITC)–RGD NCPs.     

High‐Performance Sodium‐Ion Hybrid Supercapacitor Based on Nb2O5@Carbon Core–Shell Nanoparticles and Reduced Graphene Oxide Nanocomposites

Sodium‐ion hybrid supercapacitors (Na‐HSCs) have potential for mid‐ to large‐scale energy storage applications because of their high energy/power densities, long cycle life, and the low cost of sodium. However, one of the obstacles to developing Na‐HSCs is the imbalance of kinetics from different charge storage mechanisms between the sluggish faradaic anode and the rapid non‐faradaic capacitive cathode. Thus, to develop high‐power Na‐HSC anode materials, this paper presents the facile synthesis of nanocomposites comprising Nb₂O₅@Carbon core–shell nanoparticles (Nb₂O₅@C NPs) and reduced graphene oxide (rGO), and an analysis of their electrochemical performance with respect to various weight ratios of Nb₂O₅@C NPs to rGO (e.g., Nb₂O₅@C, Nb₂O₅@C/rGO‐70, ‐50, and ‐30). In a Na half‐cell configuration, the Nb₂O₅@C/rGO‐50 shows highly reversible capacity of ≈285 mA h g^?1 at 0.025 A g^?1 in the potential range of 0.01–3.0 V (vs Na/Na⁺). In addition, the Na‐HSC using the Nb₂O₅@C/rGO‐50 anode and activated carbon (MSP‐20) cathode delivers high energy/power densities (≈76 W h kg^?1 and ≈20 800 W kg^?1) with a stable cycle life in the potential range of 1.0–4.3 V. The energy and power densities of the Na‐HSC developed in this study are higher than those of similar Li‐ and Na‐HSCs previously reported.     

Supercritical‐Fluid‐Assisted One‐Pot Synthesis of Biocompatible Core(γ‐Fe2O3)/Shell(SiO2) Nanoparticles as High Relaxivity T2‐Contrast Agents for Magnetic Resonance Imaging

Monodisperse iron oxide/microporous silica core/shell composite nanoparticles, core(γ‐Fe₂O₃)/shell(SiO₂), with a diameter of approximately 100 nm and a high magnetization are synthesized by combining sol–gel chemistry and supercritical fluid technology. This one‐step processing method, which is easily scalable, allows quick fabrication of materials with controlled properties and in high yield. The particles have a specific magnetic moment (per kg of iron) comparable to that of the bulk maghemite and show superparamagnetic behavior at room temperature. The nanocomposites are proven to be useful as T₂ MRI imaging agent. They also have potential to be used in NMR proximity sensing, theranostic drug delivery, and bioseparation.     

Core–Shell Nanoparticles: Characterizing Multifunctional Materials beyond Imaging—Distinguishing and Quantifying Perfect and Broken Shells

Core–shell nanoparticles (NPs) are amongst the most promising candidates in the development of new functional materials. Their fabrication and characterization are challenging, in particular when thin and intact shells are needed. To date no technique has been available that differentiates between intact and broken or cracked shells. Here a method is presented to distinguish and quantify these types of shells in a single cyclic voltammetry experiment by using the different electrochemical reactivities of the core and the shell material. A simple comparison of the charge measured during the stripping of the core material before and after the removal of the shell makes it possible to determine the quality of the shells and to estimate their thickness. As a proof‐of‐concept two multifunctional examples of core–shell NPs, Fe₃O₄@Au and Au@SnO₂, are used. This general and original method can be applied whenever core and shell materials show different redox properties. Because billions of NPs are probed simultaneously and at a low cost, this method is a convenient new screening tool for the development of new multifunctional core–shell materials and is hence a powerful complementary technique or even an alternative to the state‐of‐the‐art characterization of core–shell NPs by TEM.     

Uniform,Assembled 4 nm Mn3O4 Nanoparticles as Efficient Water Oxidation Electrocatalysts at Neutral pH

Electrochemical water splitting is one of the ways to produce environmentally‐friendly hydrogen energy. Transition‐metal (TM)‐based catalysts have been attracting attention due to their low cost and abundance, but their insufficient activity still remains a challenge. Here, 4 nm Mn₃O₄ nanoparticles (NPs) are successfully synthesized and their electrochemical behavior is investigated. Using electrokinetic analyses, an identical water oxidizing mechanism is demonstrated between the 4 and 8 nm Mn₃O₄ NPs. In addition, it is confirmed that the overall increase in the active surface area is strongly correlated with the superb catalytic activity of the 4 nm Mn₃O₄ NPs. To further enhance the oxygen evolution reaction (OER) performance, Ni foam substrate is introduced to maximize the entire number of the NPs participating in OER. The 4 nm Mn₃O₄/Ni foam electrode exhibits outstanding electrocatalytic activity for OER with overpotential of 395 mV at a current density of 10 mA cm^?2 under neutral conditions (0.5 m PBS, pH 7).     

Facile Fabrication of Highly Dispersed Pd@Ag Core–Shell Nanoparticles Embedded in Spirulina platensis by Electroless Deposition and Their Catalytic Properties

Microorganisms are widely used as the biotemplates for producing micro/nanomaterials owing to their unique features, such as exquisite morphology, renewable, and environmentally friendly. However, mass intracellular synthesis of uniformly dispersed nanoparticles (NPs) inside microorganisms is still challenging, especially in a predictable and controllable manner. Here, a facile and efficiency strategy is proposed to controllably produce highly dispersed and surfactant‐free Pd@Ag core–shell NPs within the Spirulina platensis (Sp.) cells. In this approach, the Sp. cells' permeability is enhanced by the hydrochloric acid treatment first, which enables the Pd NPs penetrate the cell envelope and distribute uniformly inside the cells, and then they can work as the catalytic seeds for the following electroless silver deposition, resulting in the intracellular fabrication of Pd@Ag core–shell NPs with no agglomeration. The Pd@Ag NPs show excellent catalytic activity (turnover frequency is up to 2893 h^?1 for the 6.32 nm Pd@Ag NPs), good stability, and recyclability toward the 4‐nitrophenol reductions. The excellent properties are attributed to the asymmetrical core–shell structure, small size, and good dispersion of Pd@Ag NPs. Due to its facility, cost‐effectiveness, and versatility, this method can be expanded to other microorganisms, so it opens tremendous opportunities for various metallic nanoparticles intracellular synthesis as well as the practical application.     

An Integrated Multifunctional Nanoplatform for Deep‐Tissue Dual‐Mode Imaging

The combination of biocompatible superparamagnetic and photoluminescent nanoparticles (NPs) is intensively studied as highly promising multifunctional (magnetic confinement and targeting, imaging, etc.) tools in biomedical applications. However, most of these hybrid NPs exhibit low signal contrast and shallow tissue penetration for optical imaging due to tissue‐induced optical extinction and autofluorescence, since in many cases, their photoluminescent components emit in the visible spectral range. Yet, the search for multifunctional NPs suitable for high photoluminescence signal‐to‐noise ratio, deep‐tissue imaging is still ongoing. Herein, a biocompatible core/shell/shell sandwich structured Fe₃O₄@SiO₂@NaYF₄:Nd³⁺ nanoplatform possessing excellent superparamagnetic and near‐infrared (excitation) to near‐infrared (emission), i.e., NIR‐to‐NIR photoluminescence properties is developed. They can be rapidly magnetically confined, allowing the NIR photoluminescence signal to be detected through a tissue as thick as 13 mm, accompanied by high T₂ relaxivity in magnetic resonance imaging. The fact that both the excitation and emission wavelengths of these NPs are in the optically transparent biological windows, along with excellent photostability, fast magnetic response, significant T₂‐contrast enhancement, and negligible cytotoxicity, makes them extremely promising for use in high‐resolution, deep‐tissue dual‐mode (optical and magnetic resonance) in vivo imaging and magnetic‐driven applications.     

Plasmon‐Enhanced Fluorescence‐Based Core–Shell Gold Nanorods as a Near‐IR Fluorescent Turn‐On Sensor for the Highly Sensitive Detection of Pyrophosphate in Aqueous Solution

Developing plasmon‐enhanced fluorescence (PEF) technology for identifying important biological molecules has a profound impact on biosensing and bioimaging. However, exploration of PEF for biological application is still at a very early stage. Herein, novel PEF‐based core–shell nanostructures as a near‐infrared fluorescent turn‐on sensor for highly sensitive and selective detection of pyrophosphate (PPi) in aqueous solution are proposed. This nanostructure gold nanorod (AuNR)@SiO₂@meso‐tetra(4‐carboxyphenyl) porphyrin (TCPP) contains a gold nanorod core with an aspect ratio of 2.3, a silica shell, and TCPP molecules covalently immobilized onto the shell surface. The silica shell is employed a rigid spacer for precisely tuning the distance between AuNR and TCPP and an optimum fluorescence enhancement is obtained. Due to the quenching effect of Cu²⁺, the copper porphyrin (TCPP‐Cu²⁺) results in a weak fluorescence. In the presence of PPi, the strong affinity between Cu²⁺ and PPi can promote the disassembly of the turn‐off state of TCPP‐Cu²⁺ complexes, and therefore the fluorescence can be readily restored. By virtue of the amplified fluorescence signal imparted by PEF, this nanosensor obtains a detection limit of 820 × 10^?9m of PPi with a good selectivity over several anions, including phosphate. Additionally, the potential applicability of this sensor in cell imaging is successfully demonstrated.     

Gadolinium‐Doped Iron Oxide Nanoprobe as Multifunctional Bioimaging Agent and Drug Delivery System

In this study, a high‐performance T₁–T₂ dual‐model contrast agent by gadolinium‐doped iron oxide nanoparticle (GION) is developed. Following its development, the application of this agent in vivo by combining doxorubicin (DOX) and folic acid (FA) (FA–GION–DOX) for targeted drug delivery to monitor cancer treatment is explored. GION showed transverse and longitudinal relaxivities up to 182.7 × 10^?3 and 7.87 × 10^?3m ^?1 s^?1, respectively, upon Gd/Fe ratio in GION at 1/4. DOX released from FA–GION–DOX is pH dependent and only kills cancer cell after FA receptor‐mediated internalization into the acidic environment of endosomes and lysosomes. Systemic delivery of FA–GION–DOX significantly inhibits the growth of tumors and shows good magnetic resonance enhancement in a human cervical cancer xenograft model. Thus, FA–GION–DOX has a potential application for the targeted and magnetic resonance imaging guided therapy of cervical cancer.     

Gold Core‐DNA‐Silver Shell Nanoparticles with Intense Plasmonic Chiroptical Activities

The strong plasmonic chiroptical activities of gold core‐DNA‐silver shell nanoparticles (NPs) are reported for the first time, using cytosine‐rich single‐stranded DNA as the template for the guidance of silver shell growth. The anisotropy factor of the optically active NPs at 420 nm reaches 1.93 × 10^?2. Their chiroptical properties are likely induced by the DNA–plasmon interaction and markedly amplified by the strong electromagnetic coupling between the gold core and silver shell.     

Temperature Responsive Solution Partition of Organic–Inorganic Hybrid Poly(N‐isopropylacrylamide)‐Coated Mesoporous Silica Nanospheres

A series of poly(N‐isopropylacrylamide)‐coated mesoporous silica nanoparticle materials (PNiPAm‐MSNs) has been synthesized by a surface‐initiated living radical polymerization with a reversible addition–fragmentation chain transfer (RAFT) reaction. The structure and the degree of polymerization of the PNiPAm‐MSNs has been characterized by a variety of techniques, including nitrogen sorption analysis, ²⁹Si and ¹³C solid‐state NMR spectroscopy, transmission electron microscopy (TEM), and powder X‐ray diffraction (XRD). The thermally induced changes of the surface properties of these polymer‐coated core–shell nanoparticles have been determined by examining their partition activities in a biphasic solution (water/toluene) at different temperatures.     

A Novel Cathode Material with a Concentration‐Gradient for High‐Energy and Safe Lithium‐Ion Batteries

A high‐energy functional cathode material with an average composition of Li[Ni_0.72Co_0.18Mn_0.10]O₂, mainly comprising a core material Li[Ni_0.8Co_0.2]O₂ encapsulated completely within a stable manganese‐rich concentration‐gradient shell is successfully synthesized by a co‐precipitation process. The Li[Ni_0.72Co_0.18Mn_0.10]O₂ with a concentration‐gradient shell has a shell thickness of about 1 µm and an outer shell composition rich in manganese, Li[Ni_0.55Co_0.15Mn_0.30]O₂. The core material can deliver a very high capacity of over 200 mA h g^?1, while the manganese‐rich concentration‐gradient shell improves the cycling and thermal stability of the material. These improvements are caused by a gradual and continuous increase of the stable tetravalent Mn in the concentration‐gradient shell layer. The electrochemical and thermal properties of this cathode material are found to be far superior to those of the core Li[Ni_0.8Co_0.2]O₂ material alone. Electron microscopy also reveals that the original crystal structure of this material remains intact after cycling.     

“Naked” Magnetically Recyclable Mesoporous Au–γ‐Fe2O3 Nanocrystal Clusters: A Highly Integrated Catalyst System

Naked magnetically recyclable mesoporous Au–γ‐Fe₂O₃ clusters, combining the inherent magnetic properties of γ‐Fe₂O₃ and the high catalytic activity of Au nanoparticles (NPs), are successfully synthesized. Hydrophobic Au–Fe₃O₄ dimers are first self‐assembled to form sub‐micrometer‐sized Au–Fe₃O₄ clusters. The Au–Fe₃O₄ clusters are then coated with silica, calcined at 550 °C, and finally alkali treated to dissolve the silica shell, yielding naked‐Au–γ‐Fe₂O₃ clusters containing Au NPs of size 5–8 nm. The silica protection strategy serves to preserve the mesoporous structure of the clusters, inhibit the phase transformation from γ‐Fe₂O₃ to α‐Fe₂O₃, and prevent cluster aggregation during the synthesis. For the reduction of p‐nitrophenol by NaBH₄, the activity of the naked‐Au–γ‐Fe₂O₃ clusters is ≈22 times higher than that of self‐assembled Au–Fe₃O₄ clusters. Moreover, the naked‐Au–γ‐Fe₂O₃ clusters display vastly superior activity for CO oxidation compared with carbon‐supported Au–γ‐Fe₂O₃ dimers, due to the intimate interfacial contact between Au and γ‐Fe₂O₃ in the clusters. Following reaction, the naked‐Au–γ‐Fe₂O₃ clusters can easily be recovered magnetically and reused in different applications, adding to their versatility. Results suggest that naked‐Au–γ‐Fe₂O₃ clusters are a very promising catalytic platform affording high activity. The strategy developed here can easily be adapted to other metal NP–iron oxide systems.     

A High‐Energy Li‐Ion Battery Using a Silicon‐Based Anode and a Nano‐Structured Layered Composite Cathode

High capacity electrodes based on a Si composite anode and a layered composite oxide cathode, Ni‐rich Li[Ni_0.75Co_0.1Mn_0.15]O₂, are evaluated and combined to fabricate a high energy lithium ion battery. The Si composite anode, Si/C‐IWGS (internally wired with graphene sheets), is prepared by a scalable sol–gel process. The Si/C‐IWGS anode delivers a high capacity of >800 mAh g^?1 with an excellent cycling stability of up to 200 cycles, mainly due to the small amount of graphene (～6 wt%). The cathode (Li[Ni_0.75Co_0.1Mn_0.15]O₂) is structurally optimized (Ni‐rich core and a Ni‐depleted shell with a continuous concentration gradient between the core and shell, i.e., a full concentration gradient, FCG, cathode) so as to deliver a high capacity (>200 mAh g^?1) with excellent stability at high voltage (～4.3 V). A novel lithium ion battery system based on the Si/C‐IWGS anode and FCG cathode successfully demonstrates a high energy density (240 Wh kg^?1 at least) as well as an unprecedented excellent cycling stability of up to 750 cycles between 2.7 and 4.2 V at 1C. As a result, the novel battery system is an attractive candidate for energy storage applications demanding a high energy density and long cycle life.     

PEGylated Polypyrrole Nanoparticles Conjugating Gadolinium Chelates for Dual‐Modal MRI/Photoacoustic Imaging Guided Photothermal Therapy of Cancer

Polypyrrole nanoparticles conjugating gadolinium chelates were successfully fabricated for dual‐modal magnetic resonance imaging (MRI) and photoacoustic imaging guided photothermal therapy of cancer, from a mixture of pyrrole and pyrrole‐1‐propanoic acid through a facile one‐step aqueous dispersion polymerization, followed by covalent attachment of gadolinium chelate, using polyethylene glycol as a linker. The obtained PEGylated poly­pyrrole nanoparticles conjugating gadolinium chelates (Gd‐PEG‐PPy NPs), sized around around 70 nm, exhibited a high T₁ relaxivity coefficient of 10.61 L mm ^?1 s^?1, more than twice as high as that of the relating free Gd³⁺ complex (4.2 L mm ^–1 s^?1). After 24 h intravenous injection of Gd‐PEG‐PPy NPs, the tumor sites exhibited obvious enhancement in both T₁‐weighted MRI intensity and photoacoustic signal compared with that before injection, indicating the efficient accumulation of Gd‐PEG‐PPy NPs due to the introduction of the PEG layer onto the particle surface. In addition, tumor growth could be effectively inhibited after treatment with Gd‐PEG‐PPy NPs in combination with near‐infrared laser irradiation. The passive targeting and high MRI/photo­acoustic contrast capability of Gd‐PEG‐PPy NPs are quite favorable for precise cancer diagnosing and locating the tumor site to guide the external laser irradiation for photothermal ablation of tumors without damaging the surrounding healthy tissues. Therefore, Gd‐PEG‐PPy NPs may assist in better monitoring the therapeutic process, and contribute to developing more effective “personalized medicine,” showing great potential for cancer diagnosis and therapy.     

Core–Ring Structured NiCo2O4 Nanoplatelets: Synthesis,Characterization, and Electrocatalytic Applications

An innovative nanostructure, namely the core–ring structure, is reported in this paper. It occurs in NiCo₂O₄ nanoplatelets, synthesized by the coprecipitation decomposition method using sodium hydroxide as the precipitant. The yield of core–ring hexagonal NiCo₂O₄ nanoplatelets is greater than 80% at 200 °C. A high‐resolution transmission electron microscopy and energy dispersive spectroscopy investigation reveals the typical core–ring nanostructure, which shows a strong enrichment of Co in the core with a Co content higher than 80%. A mechanism for the core–ring structure formation is proposed. The core–ring NiCo₂O₄ can be used as an electrocatalyst for an oxygen evolution reaction (OER) in alkaline water electrolysis. Compared with the electrodes of ordinary NiCo₂O₄ and Co₃O₄, or other NiCo₂O₄ electrodes prepared by alternate methods, the electrode coated by core‐ring NiCo₂O₄ nanoplatelets exhibits the greatest electrocatalytic properties, with an over‐potential of 0.315 V at a current density of 100 mA cm^?2.