Complementary metamaterial transmission line for monoband and dual‐band bandpass filters application

A novel composite right‐/left‐handed transmission line (CRLH TL) and its equivalent circuit model are proposed based on cascaded complementary single split ring resonator (CCSSRR). It features an intrinsically balanced wider band and an additional transmission zero above the right‐handed band relative to CRLH TL using complementary single split ring resonator and complementary split ring resonators. Moreover, two single negative (SN) metamaterial (MTM) TLs constructed by using complementary electric inductive‐capacitive resonator on the conductor strip and on the ground, respectively, are researched. Both SN MTM TLs exhibit electric resonance above the fundamental magnetic resonance. For application, a monoband (MB) bandpass filter (BPF) covered WLAN band, and a dual‐band (DB) BPF covered satellite DMB band and WiMAX band are designed, fabricated, and measured. The SN MTM TLs are adopted for the sake of deep and wide out‐of‐band suppression while CRLH MTM TLs using square‐shaped and Sierpinski‐shaped CCSSRR are critical factors of the MB and DB behavior. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

基于CRLH—TL及CSRR的带通滤波器

首次提出一种复合左右手传输线零阶谐振器及互补谐振环的新型带通滤波器.设计方法利用左右手复合传输线的独有特性,即零阶谐振器中心频率与谐振器长度无关,能在特定非零频率上得到无限波长的特点,来构造环形滤波器,并且地板蚀刻了长方形互补谐振环结构.设计过程中使用了AnsoftHFSS软件进行全波仿真,经过多次仿真,通过调节参数大小优化设计,最终结果得到中心频率为1.85GHz、带宽为0.1GHz的新型带通滤波器.在达到同样效果的前提下,减小尺寸,单个谐振器与传统相比体积减少了近80%,长方形CSBR还提高了传输特性.上述结构的实现对于左手材料在微波器件中的发展有一定的促进作用,进一步扩大了左手材料的应用范围.     

Novel application of a new metamaterial complementary electric LC resonator for the design of miniaturized sharp band‐pass filters

In this article, we introduce a new metamaterial complementary electric LC resonator (CELC) and investigate its operational mechanism, characteristics, and potentialities for application in microwave components and devices, such as filters. We consider the excitation of CELC by the electric and magnetic fields of microstrip lines and its resonance characteristics by the diagrams of effective permittivity (ε_eff) and permeability (μ_eff). A circuit model is obtained by the consideration of its coupling with the loaded microstrip line. We then realize a novel left‐handed (LH) cell by the combination of the CELC resonator and a short circuited stub. It is designed by the least mean square method. We finally use the cascade connection of such LH cells for the design of a miniaturized narrow‐band band‐pass filter with high out of band rejection. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Band‐notched ultra‐wideband antennas using nonperiodic composite right/left‐handed resonators

This article investigates the characteristics of a single/double‐cell composite right/left‐handed (CRLH) resonator and its application on multiple band‐notched ultra‐wideband (UWB) antennas while suggesting an accurate design procedure. Periodicity assumption and calculating a dispersion diagram allow band‐notched frequencies to adequately predict prior to antenna design. Zeroth‐order resonance (ZOR) frequency due to the CRLH characteristics of a mushroom resonator and higher‐order resonance frequencies are predictable through the hypothetical dispersion diagram. To demonstrate this method, compact, printed, ultra‐wideband circular monopole antennas with four/five‐band notched characteristics using a single/double mushroom resonator are presented. The effects of mushroom cell size on ZOR and the other band notched resonant frequencies are also investigated. The numerical simulations show that the asymmetrical unit cell provides the capability to tune both ZOR and band notched frequencies. Comparison between the simulation and measurement results shows reasonable agreement.     

A compact transmission line with two pairs of composite right/left‐handed passbands

A compact transmission line with two pairs of composite right/left‐handed (CRLH) passbands is investigated, and its equivalent circuit is proposed. Compared with the conventional CRLH transmission line (CRLH‐TL), we use the rectangular patches with meander lines and the T‐shaped defected ground structures (T‐DGS) to model the other two resonators, which realize the second left‐ and right‐handed bands. The dispersion relations are analytically derived using the equivalent circuit and Bloch‐Floquet theory. The five‐stage CRLH‐TL is fabricated, and the measured results are in agreement with those of simulation. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Leaky‐wave antenna with high gain and wide beam‐scanning angle range based on novel SIW‐CRLH transmission line

A leaky‐wave antenna (LWA) with high gain and wide beam‐scanning angle is proposed in this article using a novel substrate integrated waveguide (SIW) composite left/right‐handed transmission line (CRLH TL). The novel SIW‐CRLH TL is analyzed and the equivalent circuit model is also provided. Considering the continuous phase constant of the balanced SIW‐CRLH TL from negative to positive values, the proposed LWA can obtain a continuous beam steering property from backward to broadside to forward. For verification, a periodic LWA, which is comprised of 10 unit cells of the balanced SIW‐CRLH TL, is fabricated and measured. The measured and simulated results agree well, showing that the proposed periodic LWA operates from has continuous beam‐scanning capabilities of about 90° from backward to forward (including the broadside) with gains of better than 10 dB within the operating band. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:36–41, 2016.     

Multimode resonator based on composite right‐/left‐handed transmission line for UWB bandpass filter application

A new multimode resonator (MMR) using composite right‐/left‐handed transmission line (CRLH TL) is proposed and discussed. The CRLH TL structure is constructed by cascading interdigital coupled microstrip line sections on which short‐ended stepped impedance stubs are loaded. Dispersion characteristic of the transmission line structure is obtained using the Bloch–Floquet theory. The resonator, which has multiresonances electrical behaviors, is especially suitable in ultrawideband (UWB) applications. An UWB filter is presented as an illustration. With transmission zeros introduced at upper stopband, the filter has a sharp skirt performance. In addition, rejection level at lower stopband also gets enhanced due to direct current suppression effects of the multimode resonator. The filter prototype is implemented and measured. The measured results validate the theoretical analysis and show that the filter has a sharp skirt and an out‐of‐band rejection level as good as 38 dB. Meanwhile, return loss is better than 16 dB. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:815–824, 2015.     

Bandwidth and gain‐enhanced composite right/left‐handed antenna for ultra‐wideband applications

A coplanar waveguide‐fed metamaterial antenna is presented for ultra‐wideband (UWB) applications. The proposed antenna is designed with single unit‐cell composite right/left‐handed transmission line (CRLH‐TL) loaded with a split‐ring resonator (SRR). The UWB characteristic is obtained by merging the zeroth‐order resonance of CRLH‐TL with two additional resonances due to the ground plane and SRR respectively. Subsequently, a partial reactive impedance surface is embedded on the rear side of the proposed antenna to enhance the realized gain without affecting the UWB response. The overall size of the antenna is 0.241λ_o x 0.267λ_o x 0.013λ_o (28.8 x 32 x 1.6 mm³), where λ_o is the free space wavelength at 2.51 GHz. The measured results indicate –10 dB fractional bandwidth of 139.19% (2.51‐14 GHz) with realized gains of 2.3, 4.6, and 6 dBi at the resonant frequencies 4, 7.84, and 10.29 GHz respectively. The measured peak realized gain is 6.6 dBi at 10.6 GHz. The radiation efficiency is above 63.85% for the entire UWB range with a peak value of 86.84%. A fairly stable group delay with variation within 1 ns is obtained throughout the operating frequency band. A good agreement has been observed between the measured and simulated results.     

Novel configuration of ultra‐wide band uni‐planar configuration of complementary split ring resonator composite right/left‐handed based band pass filter with sharp roll off and good stopband attenuation

In this paper, a compact novel simple design of ultra‐wide bandpass filter with high out of band attenuation is presented. The filter configuration is based on combining an ultra‐wide band composite right/left‐handed (CRLH) band pass filter (BPF) with simple uni‐planar configuration of complementary split ring resonator (UP‐CSRR). By integrating two UP‐CSRR cells, the ultra‐wideband CRLH filter roll‐off and wide stopband attenuation are enhanced. The filter has 3 dB cutoff frequencies at 3.1 GHz and 10.6 GHz with insertion loss equals 0.7 dB in average and minimum and maximum values of 0.48 dB and 1.05 dB, respectively over the filter passband. Within the passband. The transition band attenuation from 3 dB to 20 dB is achieved within the frequency band 1.9 GHz to 3.1 GHz (48%) at lower cutoff and the frequency band 10.6 GHz to 11.4 GHz (7%) at upper stopband. Moreover, the filter has a wide stopband attenuation >20 dB in frequencies 11 GHz to 13.6 GHz (21%) and ends with 3 dB cutoff frequency at 14.8 GHz. Furthermore, the designed filter size is very compact (23 × 12 mm²) whose length is only about 0.17 λ_g at 6.85 GHz. The filter performance is examined using circuit modeling, full‐wave simulations, and experimental measurements with good matching between all of them.     

Wideband balun filter on slot‐line resonator with intrinsic balanced performance in magnitude and phase

In this article, a novel wideband balun filter on the coupled slotline‐line resonator topology with intrinsic balanced performance in magnitude and phase performance is presented. The proposed wideband balun filter consists of four uniform half‐wavelength slot‐line resonators (SLRs) in middle, one single‐ended unbalanced port, and one balanced port with two terminals. By utilizing the distinct field conversion from the slotline to the microstrip line feeding line, the proposed technique can realize good balanced performance inherently in magnitude and phase over a wideband frequency range. In order to demonstrate the proposed scheme and support the design conception, one circuit prototype is designed, fabricated, and tested. All of the measured results of the frequency response, magnitude, and phase imbalance performance agree well with the simulated one, and these results have effectively demonstrated its good filtering property, intrinsic balanced performance in magnitude and phase over a wide band frequency.     

Compact wideband bandpass filter based on double‐T‐shaped stub loaded resonator and loading technique for zero‐voltage point

In this article, a double‐T‐shaped stub centrally loaded uniform impedance resonator (UIR) is introduced and its resonant characteristics are well clarified, which provided a simple approach for triple‐mode wideband bandpass filter (BPF) design. The double‐T‐shaped stub consists of a T‐shaped stub at the center of UIR and two shunt uniform‐impedance stubs at the T‐shaped stub. Furthermore, loading technique for zero‐voltage point is employed to guide design procedure from UIR to the proposed resonator. The resonant frequencies of the first three modes for the resonator can be free to adjust by the length of the UIR and the two kinds of stub. Finally, a compact wideband BPF is designed, fabricated, and measured. The measured results are in good agreement with the full‐wave simulation results. The realized wideband filter exhibits a 3 dB fractional bandwidth of 69.1% with good in‐band filtering performance, wide stopband, and sharp out‐of‐band rejection skirt.     

Hilbert‐shaped complementary ring resonator and application to enhanced‐performance low pass filter with high selectivity

In this article, a novel single negative metamaterial (MTM) transmission line (TL) consisting of a Hilbert‐shaped complementary ring resonator (H‐CRR) on the ground plane is initially presented and studied in depth. Then based on the proposed MTM TL, a novel six‐section Hi‐Lo microstrip low‐pass filter (LPF) with a cut‐off frequency 2.5 GHz is developed, fabricated, and measured. Measurement results indicate that: by integrating H‐CRR, the selectivity has been significantly improved which is 77.3 dB/GHz due to the single negative permittivity; by etching a crown square on low‐impedance section, the bandwidth characterized by 20 dB return loss was obviously enhanced by 26.2% and the maximal sidelobe level of in‐band return loss was reduced from 22 to 24.6 dB. What' more, the developed LPF achieved a 36.3% size reduction with respect to its conventional counterpart. The design concept, which was confirmed by the measurement data, is of practical value and can be popularized in other microwave devices where high selectivity is requested. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Bulk acoustic wave‐coupled resonator filters: Concept,design, and application

Bulk‐acoustic‐wave‐coupled resonator filters is an emerging technology that is capable of meeting increasingly ambitious demands of wireless applications by addressing performance, chip size, and die cost. This article outlines the fundamental design principles of these filters. A major consideration of filter design is the choice of the coupling structure between the two vertically stacked resonators. This can be either a multilayer Bragg coupler or a novel structure using a single layer of a very low acoustic impedance material. It is demonstrated how spurious modes are related to the dispersion diagram and how they affect the passband characteristics. For the suppression of these spurious modes suitable edge termination techniques are discussed. Based on optimized coupler performance and known parasitic effects, we analyze circuit design methods for microwave filters and duplexers with specific passband, roll‐off, and wideband responses. We show as example a miniature 2.0 × 1.6 mm² Universal Mobile Telecommunication System (UMTS) Band1 duplexer fabricated using the coupler resonator technology. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Wideband leaky‐wave antenna with consistent gain and wide beam scanning angle based on multilayered substrate integrated waveguide composite right/left‐handed transmission line

In this article, a wideband leaky‐wave antenna is designed for consistent gain and wide beam scanning angle by using the proposed multilayered substrate integrated waveguide (SIW) composite right/left‐handed transmission line (CRLH TL). The proposed SIW CRLH structure consists of two parts: an interdigital fingers slot of rotating 45° etched on the upper ground of the SIW, and a rotated parasitic patch beneath the slot. Due to the continuous phase constants change from negative to positive values of the proposed SIW‐CRLH under the balanced condition, the designed LWA can achieves a continuous beam‐scanning property from backward to forward over the operating frequency band. The designed antenna is fabricated and measured, the measured and simulated results are in good agreements with each other, indicating that the designed antenna obtains a measured continuous main beam scanning from backward ?78° to forward +76° over the frequency range from 7.7 to 12.8 GHz with a consistent gain of more than 9.5 dB. Besides, the designed antenna also exhibits a measured 3‐dB gain bandwidth of 45.1% with maximum gain of 15 dB. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:731–738, 2016.     

A wideband dielectric resonator antenna array using air‐bridgeless coplanar waveguide power divider

In this communication a 2 × 2 dielectric resonator antenna (DRA) array is proposed with a wideband frequency response. An air bridgeless coplanar waveguide (CPW) power divider network is first time used to feed the 2 × 2 DRA array. Four rectangular DRAs are used as array element and exited in TE₁₁₁ mode by four slots at the end of the CPW lines in the feed network. The straight CPW phase delay line in feed network is further meandered resulting an enhanced radiation performance. The proposed DRA array exhibits a wideband response with an impedance bandwidth of 16% while maintaining a stable broadside radiation pattern with the gain range from 8 to 9.4 dBi. The proposed design is fabricated and measured, reaching good agreement with simulation results.     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

Quintuple-mode wideband bandpass filter based on stub-loaded circular resonator

In this paper, novel compact wideband filters have been implemented using a stub-loaded microstrip resonator based on a circular open-loop configuration for the first time. To offer an alternative wideband filter configuration, the quadruple?/quintuple-mode wideband bandpass filters (BPFs) using stub-loaded circular microstrip resonator (SLCMR) and parallel-coupled microstrip line (PCML) feed configuration are proposed. They are realized by employing a single open stub and two open stubs, respectively. A half-wavelength $\left(\lambda /2\right)$ circular microstrip resonator (CMR) loaded with two open stubs excites three resonant modes, while the one with a single stub produces two resonant modes. One of the modes is odd-mode generated by a $\lambda /2$ CMR, the others are even-modes excited by the two loading stubs. The PCML with enhanced input/output (I/O) coupling degree excites also two modes in the passband. Two loading stubs not only creates transmission poles in the passband, they also create two transmission zeros in the lower and upper stopbands. The quadruple?/quintuple-mode wideband BPFs with fractional bandwidths FBW of 60% and 62% are successfully realized by using the SLCMR and PCML feed configuration together. Both filters are designed, fabricated, and tested where excellent agreement between simulated and measured results is observed.     

Design of wideband bandpass filter with high and wide stopband rejection using asymmetrical‐loaded stepped‐impedance resonator

This study presents a wideband bandpass filter (WBBPF) with wide and high stopband suppression by loading a stepped‐impedance resonator (SIR). The prototype of WBBPF is composed of an inverted π‐shaped resonator with T‐shaped resonator and open stub loaded, centrally. Odd‐/even‐mode analysis technique is employed to characterize the resonant properties of this prototype. Then, a SIR is loaded to this filter, asymmetrically, to improve the out‐of‐band performance. For experimental validation, a WBBPF is designed, fabricated, and tested. The measurement results show that the center frequency of WBBPF is located at 5.095 GHz, and the 3‐dB fraction bandwidth is about 71%. Plus, the out‐of‐band suppression with 30‐dB rejection level can be extended to 18.17 GHz.     

Dielectric resonator array antenna for triple band WLAN applications with enhanced gain

An H‐shaped dielectric resonator array antenna is presented for wideband applications. The proposed antenna is excited by slot feed mechanism and investigated experimentally. The antenna covers the frequency ranges from 1.41 to 2.59 GHz, and 4.73 to 6.06 GHz with the corresponding impedance bandwidth of 59% and 24.65%, respectively. The simulation results fulfill the bandwidth requirements of IEEE 802.11a/b/g (2.4‐2.484 GHz/5.15‐5.35 GHz/5.725‐5.825 GHz) for Wireless local area network (WLAN) applications. The proposed antenna has simple structure, easy to fabricate and its measured radiation pattern shows a reliable performance in the desired operating bands.     

Isolation enhancement of rectangular dielectric resonator antennas using wideband double slit complementary split ring resonators

A wideband epsilon‐negative structure is employed as one‐layer and two‐layer isolators to reduce mutual coupling in multiple‐input multiple‐output systems composed of two E‐coupled rectangular dielectric resonator antennas. The proposed unit cell with ?15 dB bandwidth for S₂₁ extending from 1970 to 3317 MHz, is a double slit complementary split ring resonator etched on the ground plane of a stripline. Each layer is composed of a 2 × 3 array of the suggested unit cell. Reduction in isolation of more than 11 dB for the one‐layer case and higher than 20 dB for the two‐layer case are measured within the frequency range of 2.604 to 2.64 GHz which includes WiMAX. The highest isolation level of 36 dB is realized at 2.868 GHz. The impedance matching, gain, radiation efficiency, and envelope correlation are improved compared to the original case. A prototype is designed, fabricated, and tested. Simulation data and measurement results are in good agreement.