Synthesis and characterization of polyurethane/Mg‐Al layered double hydroxide nanocomposites

Layered double hydroxide (LDH) is a new type of nanofiller, which improves the physicochemical properties of the polymer matrix. In this study, 1, 3, 5, and 8 wt % of dodecyl sulfate‐intercalated LDH (DS‐LDH) has been used as nanofiller to prepare a series of thermoplastic polyurethane (PU) nanocomposites by solution intercalation method. PU/DS‐LDH composites so formed have been characterized by X‐ray diffraction and transmission electron microscopy analysis which show that the DS‐LDH layers are exfoliated at lower filler (1 and 3 wt %) loading followed by intercalation at higher filler (8 wt %) loading. Mechanical properties of the nanocomposite with 3 wt % of DS‐LDH content shows 67% improvement in tensile strength compared to pristine PU, which has been correlated in terms of fracture behavior of the nanocomposites using scanning electron microscope analysis. Thermogravimetric analysis shows that the thermal stability of the nanocomposite with 3 wt % DS‐LDH content is ≈ 29°C higher than neat PU. Limiting oxygen index of the nanocomposites is also improved from 19 to 23% in neat PU and PU/8 wt% DS‐LDH nanocomposites, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ethylene vinyl acetate/Mg‐Al LDH nanocomposites by solution blending

Partially exfoliated ethylene vinyl acetate (EVA‐40, 40% vinyl acetate content)/layered double hydroxide (LDH) nanocomposites using organically modified layered double hydroxide (DS‐LDH) have been synthesized by solution intercalation method. X‐ray diffraction (XRD) and transmission electron microscopy (TEM) studies of nanocomposites shows the formation of exfoliated LDH nanolayers in EVA‐40 matrix at lower DS‐LDH contents and partially intercalated/exfoliated EVA‐40/MgAl LDH nanocomposites at higher DS‐LDH contents. These EVA‐40/MgAl LDH nanocomposites demonstrate a significant improvement in tensile strength and elongation at break for 3 wt% of DS‐LDH filler loading compare to neat EVA‐40 matrix. Thermogravimetric analysis also shows that the thermal stability of the nanocomposites increases with DS‐LDH content in EVA‐40. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Ethylene vinyl acetate/ethylene propylene diene terpolymer‐blend‐layered double hydroxide nanocomposites

Ethylene vinyl acetate (EVA‐45)/ethylene propylene diene terpolymer (EPDM) blend‐layered double hydroxide (LDH) nanocomposites have been prepared by solution blending of 1:1 weight ratio of EVA and EPDM with varying amounts of organo LDH (DS‐LDH). X‐ray diffraction and transmission electron microscopy analysis suggest the formation of partially exfoliated EVA/EPDM/DS‐LDH nanocomposites. Measurement of mechanical properties of the nanocomposites (3 wt% DS‐LDH content) show that the improvement in tensile strength and elongation at break are 35 and 12% higher than neat EVA/EPDM blends. Dynamic mechanical thermal analysis also shows that the storage modulus of the nanocomposites at glass transition temperature is higher compared to the pure blend. Such improvements in mechanical properties have been correlated in terms of fracture behavior of the nanocomposites using scanning electron microscopy analysis. Thermal stability of the prepared nanocomposites is substantially higher compared to neat EVA/EPDM blend, confirming the formation of high‐performance polymer nanocomposites. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Rubber/LDH nanocomposites by solution blending

The rubber nanocomposites containing ethylene vinyl acetate (EVA) having 60 wt % of vinyl acetate content and organomodified layered double hydroxide (DS‐LDH) as nanofiller have been prepared by solution intercalation method and characterized. The XRD and TEM analysis demonstrate the formation of completely exfoliated EVA/DS‐LDH nanocomposites for 1 wt % filler loading followed by partially exfoliated structure for 5–8 wt % of DS‐LDH content. EVA/DS‐LDH nanocomposites show improved mechanical properties such as tensile strength (TS) and elongation at break (EB) in comparison with neat EVA. The maximum value of TS (5.1 MPa) is noted for 3 wt % of DS‐LDH content with respect to TS value of pure EVA (2.6 MPa). The data from thermogravimetric analysis show the improvement in thermal stability of the nanocomposites by ≈15°C with respect to neat EVA. Limiting oxygen index measurements show that the nanocomposites act as good flame retardant materials. Swelling property analysis shows improved solvent resistance behavior of the nanocomposites (1, 3, and 5 wt % DS‐LDH content) compared with neat EVA‐60. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of ethylene vinyl acetate/Mg–Al layered double hydroxide nanocomposites

Mg–Al layered double hydroxide (LDH)/Ethylene vinyl acetate (EVA‐28) nanocomposites were prepared through solution intercalation method using organically modified layered double hydroxide (DS‐LDH). DS‐LDH was made by the intercalation of sodium dodecyl sulfate (SDS) ion. The structure of DS‐LDH and its nanocomposites with EVA‐28 was determined by X‐ray diffraction (XRD) and transmission electron microscope (TEM) analysis. XRD analysis shows that the original peak of DS‐LDH shifted to lower 2θ range and supports the formation of intercalated nanocomposites while, TEM micrograph shows the presence of partially exfoliated LDH nanolayers in addition to orderly stacked LDH crystallites in the polymer matrix. The presence of LDH in the nanocomposites has been confirmed by Fourier transform infrared (FTIR) analysis. The mechanical properties show significant improvement for the nanocomposite with respect to neat EVA‐28. Thermogravimetric (TGA) analysis shows that thermal stability of the nanocomposites is higher than that of EVA‐28. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1845–1851, 2007     

Preparation and characterization of exfoliated layered double hydroxide/silicone rubber nanocomposites

Silicone rubber (SR)/Mg–Al layered double hydroxide (LDH) nanocomposites were prepared by the solution intercalation of SR crosslinked by a platinum‐catalyzed hydrosilylation reaction into the galleries of dodecyl sulfate intercalated layered double hydroxide (DS–LDH). X‐ray diffraction and transmission electron microscopy analysis showed the formation of exfoliated structures of organomodified LDH layers in the SR matrix. The tensile strength and elongation at break of SR/DS–LDH (5 wt %) were maximally improved by 53 and 38%, respectively, in comparison with those of the neat polymer. Thermogravimetric analysis indicated that the thermal degradation temperature of the exfoliated SR/DS–LDH (1 wt %) nanocomposites at 50% weight loss was 20°C higher than that of pure SR. Differential scanning calorimetry analysis data confirmed that the melting temperature of the nanocomposites increased at lower filler loadings (1, 3, and 5 wt %), whereas it decreased at a higher filler loading (8 wt %). The relative improvements in the solvent‐uptake resistance behavior of the SR/DS–LDH nanocomposites were also observed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Morphology and properties of stearate‐intercalated layered double hydroxide nanoplatelet‐reinforced thermoplastic polyurethane

In the past few years, layered double hydroxides (LDHs) with monolayer structure have been much studied for the development of polymer nanocomposites. LDHs with intercalated stearate anions form a bilayer structure with increased interlayer spacing and are expected to be better nanofillers in polymers. In the work reported, thermoplastic polyurethane (PU)/stearate‐intercalated LDH nanocomposites were prepared by solution intercalation and characterized. X‐ray diffraction and transmission electron microscopy confirmed the exfoliation at lower filler loading followed by intercalation at higher filler loading in PU matrix. As regards mechanical properties, these nanocomposites showed maximum improvements in tensile strength (45%) and elongation at break (53%) at 1 and 3 wt% loadings. Maximum improvements in storage and loss moduli (20%) with a shift of glass transition temperature (15 °C) and an increase in thermal stability (32 °C) at 50% weight loss were observed at 8 wt% loading in PU. Differential scanning calorimetry showed a shift of melting temperature of the soft segment in the nanocomposites compared to neat PU, possibly due to the nucleating effect of stearate‐intercalated LDH on the crystal structure of PU. All these findings are promising for the development of mechanically improved, thermally stable novel PU nanocomposites. Copyright © 2011 Society of Chemical Industry     

Preparation and properties of in‐situ polymerized polyurethane/stearate intercalated layer double hydroxide nanocomposites

The present work deals with the effect of stearate intercalated layered double hydroxide (St‐LDH) loadings on the morphological, mechanical, thermal, adhesive and flame retardant properties of polyurethane (PU)/St‐LDH nanocomposites prepared by the in situ polymerization method. X‐ray diffraction and transmission electron microscopy studies confirmed that exfoliation takes place at 3 wt% loading followed by intercalation at higher filler loadings in the PU matrix. The exfoliated structure has been further verified by atomic force microscopy. The measurements of stress‐strain, thermogravimetric analysis, dynamic mechanical analysis, lap shear strength and peel strength analysis showed that the nanocomposites containing 3 wt% St‐LDH exhibit excellent improvement in tensile strength (ca 175%) and log storage modulus (ca 14%), while PU/St‐LDH (5 wt%) possesses optimum improvement in glass transition temperature (ca 6 °C), lap shear strength (200%) and peel strength (130%) over neat PU. In addition, the gradual improvements in limiting oxygen index value with St‐LDH loading indicated the higher effectiveness in providing better barrier properties as well as better flame retardant behavior. Copyright © 2012 Society of Chemical Industry     

Effect of bilayered stearate ion‐modified Mg?Al layered double hydroxide on the thermal and mechanical properties of silicone rubber nanocomposites

The homogeneous dispersion of nanofillers in polymer matrices to form polymer nanocomposites remains a challenge in the development of high‐performance polymer materials for various applications. In the work reported, a stearate ion‐modified Mg? Al layered double hydroxide (St‐LDH) as nanofiller was incorporated in a silicone rubber (SR) matrix by solution intercalation and subsequently characterized. X‐ray diffraction and transmission electron microscopy studies confirm the formation of a predominantly exfoliated dispersion of St‐LDH layers of 75–100 nm in width and about 1–2 nm in thickness in the SR. Thermogravimetric analysis shows that the thermal degradation temperature of the exfoliated SR/St‐LDH (1 wt%) nanocomposites is about 80 °C higher than that of pure SR. Differential scanning calorimetric studies indicate that the melting and crystallization temperatures are higher by 4 and 10 °C for 5 and 8 wt% St‐LDH‐loaded SR nanocomposites compared to neat SR. A significant improvement of 97% in tensile strength and 714% in storage modulus and a reduction of 82% in oxygen permeability have been achieved at 3 wt% St‐LDH loading in SR. Copyright © 2011 Society of Chemical Industry     

Effect of vinyl acetate content on the mechanical and thermal properties of ethylene vinyl acetate/MgAl layered double hydroxide nanocomposites

Ethylene vinyl acetate (EVA)/Mg‐Al layered double hydroxide (LDH) nanocomposites using EVA of different vinyl acetate contents (EVA‐18 and EVA‐45) have been prepared by solution blending method. X‐ray diffraction and transmission electron microscopic studies of nanocomposites clearly indicate the formation of exfoliated/intercalated structure for EVA‐18 and completely delaminated structure for EVA‐45. Though EVA‐18 nanocomposites do not show significant improvement in mechanical properties, EVA‐45 nanocomposites with 5 wt % DS‐LDH content results in tensile strength and elongation at break to be 25% and 7.5% higher compared to neat EVA‐45. The data from thermogravimetric analysis show that the nanocomposites of EVA‐18 and EVA‐45 have ≈10°C higher thermal decomposition temperature compared to neat EVA. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of a phosphorus compound on the morphology,thermal properties,and flammability of polystyrene/MgAl‐layered double hydroxide nanocomposites

Phosphorus, nitrogen‐containing monomer, acryloxyethyl phenoxy phosphorodiethyl amidate (AEPPA), was synthesized and copolymerized with styrene (St). Nanocomposites of polystyrene and poly(St‐co‐AEPPA) with various amounts of Mg‐Al layered double hydroxide (LDH) were then prepared by in situ bulk polymerization. Structure and morphology of the nanocomposites were investigated by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The nanocomposites were also examined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and microscale combustion calorimeter (MCC) to evaluate the thermal properties and flammability. Intercalated or exfoliated structures were obtained for all the nanocomposites. The results from XRD and TEM showed the LDH layers dispersed better in poly(St‐co‐AEPPA) than those in PS matrix. Decrease in thermal stability and enhancement in char residues were observed for poly(St‐co‐AEPPA) nanocomposites compared with PS nanocomposites at the same LDH loading. The addition of LDH can obviously reduce the heat release capacity (HRC) and total heat release (THR) of PS. Moreover, further reductions in HRC and THR were found in poly(St‐co‐AEPPA) nanocomposites. The reduction in flammability was attributed to the lower maximum mass loss rate (MMLR) and higher char residues of the nanocomposites. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Assembly of layered double hydroxide on multi‐walled carbon nanotubes as reinforcing hybrid nanofiller in thermoplastic polyurethane/nitrile butadiene rubber blends

An efficient approach has been applied to assemble MgAl layered double hydroxide onto pristine carbon nanotubes using sodium dodecylsulfate. The assembling process and formation of such hybrid nanostructures were established using X‐ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and high‐resolution transmission electron microscopy. Subsequently, the hybrid was used as nanofiller in the development of high‐performance thermoplastic polyurethane/acrylonitrile butadiene rubber (1:1 w/w) blend nanocomposites. Measurements of mechanical and dynamic mechanical properties show that tensile strength, elongation at break and storage modulus improve significantly by 171%, 1.8 times and 241% in a blend with 0.50 wt% loading of hybrid filler. Thermogravimetric analysis shows that the thermal stability of the blend with 0.50 wt% hybrid filler compared to neat material is maximally improved by 20 °C determined at 50% weight loss. Differential scanning calorimetry shows the maximum enhancement in melting temperature (7 °C) and crystallization temperature (31 °C) due to significant nucleation efficiency of the filler, homogeneous dispersion and strong interfacial interaction between polymer matrix and filler. © 2015 Society of Chemical Industry     

Swelling and mechanical properties of (acrylonitrile‐butadiene rubber)/(hydrogenated acrylonitrile‐butadiene rubber) blends with precipitated silica filled in gasohol fuels

This work studied the effects of hydrogenated acrylonitrile‐butadiene rubber (HNBR) and precipitated silica (PSi) loadings in acrylonitrile‐butadiene rubber (NBR) filled with 60 parts per hundred of rubber (phr) of carbon black (CB) for oil‐resistant seal applications in contact with gasohol fuel. The cure characteristics, mechanical properties, and swelling behavior of HNBR/NBR blends reinforced with PSi before and after immersion in ethanol‐based oils (E10, E20, and E85) were then monitored. This work studied the effects of PSi loading in rubber compounds on the mechanical properties of the rubber blends. The results suggested that the scorch time of CB‐filled NBR/HNBR was not affected by HNBR loading, but the cure time, Mooney viscosity, and torque difference increased with HNBR content. The swelling of the blends in E85 oil were relatively low compared with those in E10 and E20 oils. The recommended NBR/HNBR blend ratio for oil‐resistant applications was 50/50. Tensile strength and elongation at break before and after immersion in gasohol oils increased with HNBR loading, and the opposite effect was found for tensile modulus and hardness. PSi filler had no effect on scorch time, but decreased the cure time of the blends. The swelling level of the blends slightly decreased with increasing PSi content. The recommended silica content for optimum reinforcement for black‐filled NBR/HNBR blend at 50/50 was 30 phr. The results in this work suggested that NBR/HNBR blends reinforced with 60 phr of CB and 30 phr of silica could be potentially used for rubber seals in contact with gasohol fuels. J. VINYL ADDIT. TECHNOL., 22:239–246, 2016. © 2014 Society of Plastics Engineers     

Effects of nanotalc inclusion on mechanical,microstructural, melt shear rheological,and crystallization behavior of polyamide 6‐based binary and ternary nanocomposites

The objective of the study is to investigate the effect of inclusion of nanotalc on the strength properties of polyamide 6 (PA6)‐based binary and ternary nanocomposites. Binary nanocomposites were prepared by melt compounding of PA6 with varying content of nanotalc (1, 2, and 4 wt%). Ternary nanocomposites were prepared by melt compounding of compatibilized blend of PA 6 and ethylene‐co‐butyl acrylate (EBA elastomer) with varying content of nanotalc (1, 2, and 4 wt%). Both the binary and ternary nanocomposites registered a very high improvement in the strength/stiffness‐related properties at lower filler loading of 1 wt%. Phase morphology of the composites studied by SEM, TEM, and XRD revealed the formation of extended brane‐like structures and delaminated talc layers in the binary nanocomposites. The modulus predicted by Halpin‐Tsai and Mooney equation suggests that the composites retained a very good aspect ratio after melt mixing. Orientation effects of nanotalc enhanced the melt flow behavior in the composites. POLYM. ENG. SCI., 50:1978–1993, 2010. © 2010 Society of Plastics Engineers     

Morphological,mechanical, and thermal features of PMMA nanocomposites containing two‐dimensional Co–Al layered double hydroxide

The focus of the current study is to investigate the influence of Co–Al layered double hydroxide (LDH) on the morphological, thermal, and mechanical features of poly(methyl methacrylate) (PMMA)‐based nanocomposites. Sodium dodecyl sulfate modified Co–Al LDH was synthesized by single step coagulation method. The PMMA nanocomposites containing different loadings of nanofiller (1–7 wt %) and polystyrene‐grafted maleic anhydride compatibilizer (5 wt %) were melt intercalated via twin screw extruder and later subjected to injection molding to prepare mechanical testing samples. The different properties of PMMA nanocomposites were studied by using XRD, TEM, FTIR, DSC, TGA, tensile, flexural, impact, and flammability analysis. The result of XRD analysis suggested the exfoliated morphology of the nanocomposite while the TEM demonstrated the intercalated structure at higher loading of LDH. The thermal characterization results revealed that thermal properties were improved by the addition of Co–Al LDH, whereas the flammability test exposed that dripping was minimum at 7 wt % loading. The mechanical properties exhibited that optimum results were obtained at 1 wt % loading of Co–Al LDH. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45774.     

Novel one‐step synthesis of acrylonitrile butadiene rubber/bentonite nanocomposites with (3‐Mercaptopropyl)trimethoxysilane as a compatilizer

Acrylonitrile butadiene rubber (NBR)/bentonite (Bt) nanocomposites were synthesized by an one‐step method in NBR latex with (3‐Mercaptopropyl)trimethoxysilane (MPTMS) as a compatilizer. The nanocomposites were compounded with curing additives and then vulcanized. The prepared vulcanizates were characterized by Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD). The curing properties and mechanical properties were also investigated. The thermal properties were studied with thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology was investigated by field emission‐scanning electron microscopy (FE‐SEM). By swelling test, the swelling ratio and the crosslinking density were achieved. The hydrolyzation and condensation of MPTMS was identified by FTIR while the intercalated/exfoliated structure of Bt was determined by XRD. It was evident that the mechanical properties of the nanocomposites were significantly improved compared with the neat NBR. The well‐dispersed bentonite particles and effects of MPTMS were supported by the images from FE‐SEM. The results of TGA showed that the fastest weight‐loss temperature (T_max) was elevated by over 10°C for the nanocomposites compared with the neat NBR, indicating an enhanced thermal stability. By swelling test, the swelling ratio was determined, decreased to 139% for the optimized NBR/MPTMS/Bt nanocomposites compared with 210% for neat NBR. POLYM. COMPOS., 36:1693–1702, 2015. © 2014 Society of Plastics Engineers     

Poly(lactic acid)/ethylene vinyl acetate copolymer blend composites with wood flour and wollastonite: Physical properties,morphology, and biodegradability

In the present study, poly(lactic acid) (PLA), a biodegradable plastic, was melt‐blended with five weight percentages (10–50 wt%) of ethylene vinyl acetate (EVA) copolymer, a non‐biodegradable plastic, having a vinyl acetate content of 19 wt% and a melt flow index of 530 g/10 min, on a twin screw extruder, followed by an injection molding. The blends at 10 and 20 wt% EVA revealed a noticeably increased impact strength and strain at break over the pure PLA, and the blend at 10 wt% EVA exhibited the highest impact strength and strain at break. The 90/10 (wt%/wt%) PLA/EVA blend was then selected for preparing either single or hybrid composite with wood flour (WF) and wollastonite (WT). The filler loading was fixed at 30 parts by weight per hundred of resin throughout the experiment, and the WF/WT weight ratios were 30/0, 20/10, 15/15, 10/20, and 0/30. The prepared composites were examined for their mechanical and thermal properties, melt flow index, flammability, water uptake, and biodegradability as a function of composition. All the composites showed a filler‐dose‐dependent decrease in the impact strength and strain at break, but an increase in the tensile and flexural modulus (optimal at 0/30 WF/WT) and tensile and flexural strength (optimal at 30/0 WF/WT) as compared with the neat 90/10 (wt%/wt%) PLA/EVA blend. In addition, the melt flow index, char residue, anti‐dripping ability, water uptake, and biodegradability of the composites were also higher than those of the neat blend. J. VINYL ADDIT. TECHNOL., 25:313–327, 2019. © 2019 Society of Plastics Engineers     

Effect of rubber content on morphology and thermal and rheological behaviors of acrylonitrile-butadiene rubber/poly(ethylene-co-vinyl acetate)/organoclay nanocomposites

Thermoplastic elastomer nanocomposites based on acrylonitrile butadiene rubber (NBR) and poly(ethylene-co-vinyl acetate) (EVA) with different weight ratios (20, 40 and 60 wt% of NBR) and 5 wt% of organocaly (OC) were prepared in an internal mixer. The results obtained from X-ray diffraction and transmission electron microscopy (TEM) micrographs showed that due to the OC–EVA interaction, nearly all of the clay platelets were exfoliated. Scanning electron microscope (SEM) was used to investigate the particle size and phase morphology. SEM images for the unfilled blends revealed a two-phase structure in which the NBR domains were dispersed into the EVA phase. However, for the blend containing 60 wt.% of NBR, a co-continuous morphology was exhibited. The addition of OC decreased the NBR domain size significantly in which NBR remained as a dispersed phase even for the blend having the highest amount of NBR studied. Young's modulus and yield stress increased, but elongation at break and stress at break decreased for the nanocomposites in comparison with that of the unfilled materials. Thermal studies indicated that although OC decreased the degree of crystallinity and crystallization temperature of EVA slightly, it showed no effect on EVA melting temperature in comparison with that of the unfilled samples. It was also found that the nanocomposites behaved as shear thinning fluids over the entire range of angular frequency and the values of storage modulus and stress relaxation modulus of the nanocomposite containing 20 wt% of NBR was even higher than that of the NBR alone.     

Multiwalled carbon nanotube/montmorillonite hybrid filled ethylene‐co‐vinyl acetate nanocomposites with enhanced mechanical properties,thermal stability,and dielectric response

Homogeneous multiwalled carbon nanotube/montmorillonite hybrid filler (HMM) dispersion was prepared by co‐ultrasonication and was subsequently used to prepare ethylene‐co‐vinyl acetate (EVA) nanocomposites by solution blending method. XRD and TEM analysis of HMM confirm significant interaction between the montmorillonite (MMT) layers and multiwalled carbon nanotubes (MWCNT) in line with previous reports. Analysis of the nanocomposites shows the constituent fillers to be homogeneously dispersed in EVA matrix. Mechanical properties of neat EVA are remarkably improved with HMM content up to 3 wt% followed by reversion. Maximum improvement observed in tensile strength, elongation at break, and toughness are 424%, 109%, and 1122%, respectively. Results show maximum thermal stability at 4 wt% and best dielectric response at 1 wt% HMM content. Exceptional mechanical and dielectric properties of EVA nanocomposites attained may be attributed to homogeneous dispersion of fillers and improved polymer–filler interaction. Comparison shows excellent synergy between MWCNT and MMT towards mechanical reinforcement of EVA. POLYM. ENG. SCI., 58:1155–1165, 2018. © 2017 Society of Plastics Engineers     

In situ synthesis,morphology, and thermal properties of polystyrene—MgAl layered double hydroxide nanocomposites

Polystyrene (PS)/layered double hydroxide (LDH) nanocomposites were synthesized by in situ free radical bulk polymerization. LDH formed by magnesium and aluminum (Mg:Al—molar ratio of 2:1) was prepared by coprecipitation method and intercalated with sodium dodecyl sulfate (DDS). The nanocomposites were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and flammability test. The XRD and TEM demonstrated that synthesized nanocomposites in all compositions studied showed a high global dispersion of LDH in PS, suggesting exfoliation. The results of TGAs (when 50% mass loss was selected as a comparison point) and flammability tests for synthesized nanocomposites, presented a significant improvement in thermal stability and flammability property when compared with pure PS. This behavior and properties indicate application of the surfactant intercalated LDH reinforced PS in fields where thermal stability is an important characteristic. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers