Direct electrochemistry and electrocatalysis of heme-proteins immobilized in porous carbon nanofiber/room-temperature ionic liquid composite film

The combination of porous carbon nanofiber (PCNF) and room-temperature ionic liquid (RTIL) provided a suitable microenvironment for heme-proteins to transfer electron directly. Hemoglobin, myoglobin, and cytochrome c incorporated in PCNF/RTIL films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks at about −0.28 V vs. SCE in pH 7.0 buffers, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. The cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrode. The heme/PCNF/RTIL/CHIT films were also characterized by UV-vis spectroscopy, indicating that heme-proteins in the composite film could retain its native structure. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at the heme/PCNF/RTIL/CHIT film modified electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of the redox proteins.     

Immobilization, direct electrochemistry and electrocatalysis of hemoglobin on colloidal silver nanoparticles-chitosan film

This paper reports on the fabrication and characterization of hemoglobin (Hb)-colloidal silver nanoparticles (CSNs)-chitosan film on the glassy carbon electrode and its application on electrochemical biosensing. CSNs could greatly enhance the electron transfer reactivity of Hb as a bridge. In the phosphate buffer solution with pH value of 7.0, Hb showed a pair of well-defined redox peaks with the formal potential (E^0′) of −0.325 V (vs. SCE). The immobilized Hb in the film maintained its biological activity, showing a surface-controlled process with the heterogeneous electron transfer rate constant (k_s) of 1.83 s⁻¹ and displayed the same features of a peroxidase in the electrocatalytic reduction of oxygen and hydrogen peroxide (H₂O₂). The linear range for the determination of H₂O₂ was from 0.75 μM to 0.216 mM with a detection limit of 0.5 μM (S/N = 3). Such a simple assemble method could offer a promising platform for further study on the direct electrochemistry of other redox proteins and the development of the third-generation electrochemical biosensors.     

Hemoglobin immobilized on whisker-like carbon composites and its direct electrochemistry

We developed a novel mesoporous carbon/whisker-like carbon (MCWC) composite which can promote the direct electron transfer of hemoglobin (Hb) immobilized on its surface. The cyclic voltammetric results showed that Hb immobilized on the surface of the MCWC composite could undergo a direct quasi-reversible electrochemical reaction. Its formal redox potential, E^0′ is −0.313 V in the phosphate buffer solution (pH 6.9) at a scan rate of 200 mV/s and is almost independent of the scan rate in the range of 100-600 mV/s. The dependence of E^0′ on the pH of phosphate buffer solution indicated that the redox reaction of Hb includes a one-electron-transfer reaction process coupled with one-proton-transfer. The experiment obtained larger value of electron transfer rate constant, k_s, than that of Hb immobilized on other carriers reported previously due to its special structure of loosely packed nanometer-scale carbon whiskers and thus formed “V-type” nano-pores. Furthermore, Hb immobilized on the surface of the MCWC composite can retain the stable bioelectrocatalytic activity for the reduction of H₂O₂.     

Electrochemistry and electrocatalysis of hemoglobin on multi-walled carbon nanotubes modified carbon ionic liquid electrode with hydrophilic EMIMBF4 as modifier

The direct electrochemistry of hemoglobin (Hb) on multi-walled carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was achieved in this paper. By using a hydrophilic ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) as the modifier, a new CILE was fabricated and further modified with MWCNTs to get the MWCNTs/CILE. Hb molecules were immobilized on the surface of MWCNTs/CILE with polyvinyl alcohol (PVA) film by a step-by-step method and the modified electrode was denoted as PVA/Hb/MWCNTs/CILE. UV-vis and FT-IR spectra indicated that Hb remained its native structure in the composite film. Cyclic voltammogram of PVA/Hb/MWCNTs/CILE showed a pair of well-defined and quasi-reversible redox peaks with the formal potential (E^0′) of −0.370 V (vs. SCE) in 0.1 mol/L pH 7.0 phosphate buffer solution (PBS), which was the characteristic of the Hb heme Fe^III/Fe^II redox couples. The redox peak currents increased linearly with the scan rate, indicating the direct electron transfer was a surface-controlled process. The electrochemical parameters of Hb in the film were calculated with the results of the electron transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s) as 0.49 and 1.054 s⁻¹, respectively. The immobilized Hb in the PVA/MWCNTs composite film modified CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide. So the proposed electrode showed the potential application in the third generation reagentless biosensor.     

An electrochemical biosensor based on Nafion-ionic liquid and a myoglobin-modified carbon paste electrode

An electrochemical biosensor was constructed based on the immobilization of myoglobin (Mb) in a composite film of Nafion and hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆) for a modified carbon paste electrode (CPE). Direct electrochemistry of Mb in the Nafion-BMIMPF₆/CPE was achieved, confirmed by the appearance of a pair of well-defined redox peaks. The results indicate that Nafion-BMIMPF₆ composite film provided a suitable microenvironment to realize direct electron transfer between Mb and the electrode. The cathodic and anodic peak potentials were located at −0.351 V and −0.263 V (vs. SCE), with the apparent formal potential (Ep) of −0.307 V, which was characteristic of Mb Fe(III)/Fe(II) redox couples. The electrochemical behavior of Mb in the composite film was a surface-controlled quasi-reversible electrode process with one electron transfer and one proton transportation when the scan rate was smaller than 200 mV/s. Mb-modified electrode showed excellent electrocatalytic activity towards the reduction of trichloroacetic acid (TCA) in a linear concentration range from 2.0 × 10⁻⁴ mol/L to 1.1 × 10⁻² mol/L and with a detection limit of 1.6 × 10⁻⁵ mol/L (3σ). The proposed method would be valuable for the construction of a third-generation biosensor with cheap reagents and a simple procedure.     

A study of ion exchange at the poly(butyl viologen)-electrolyte interface by SECM

In this work, the ion exchange characteristics of poly(butyl viologen) (PBV) thin films on a platinum electrode has been investigated by cyclic voltammetric (CV) scans. Since ferrocyanide anions (Fe(CN)₆⁴⁻) were added during the polymerization of the PBV thin-film for its stability, Fe(CN)₆⁴⁻ could form charge transfer complex with monomer and co-deposited with polymer. Scanning electrochemical microscopy (SECM) was used to probe the released Fe(CN)₆⁴⁻ ions from PBV film with Os(bpy)₃Cl₂ as a mediator for the approaching process in 0.5 M KCl medium. Mass changes during the redox process of the film were also monitored in-situ by electrochemical quartz crystal microbalance (EQCM). The ion exchange and transport behavior was observed during CV cycling of the film of the SECM and EQCM. The insertion and extraction of anions were found to be potential-dependence. Moreover, the decrease in tip current of released Fe(CN)₆⁴⁻ with increasing cycle number accounted for the ion exchange between Fe(CN)₆⁴⁻ and Cl⁻ in the KCl electrolyte. However, the Fe(CN)₆⁴⁻/Fe(CN)₆³⁻ redox couple was found to be highly stable between 0.0 and 0.5 V (vs. Ag/AgCl/saturated KCl) in the phosphate buffer solution. Therefore, the electrochemical property of Fe(CN)₆⁴⁻/Fe(CN)₆³⁻ redox couple was studied at different scan rates using CV technique. The peak currents were directly proportional to the scan rate as predicted for a surface confined diffusionless system. The surface coverage (Γ) and the concentration of Fe(CN)₆⁴⁻ were determined to be 1.88 × 10⁻⁸ mol/cm² and 0.641 mol/dm³, respectively. By neglecting cations incorporation during redox reaction of the PBV film and also based on the results obtained from energy-dispersive X-ray spectroscopy for the films of as-deposited, reduced and oxidized states, an ion exchange mechanism was proposed.     

Direct electron transfer of hemoglobin in a CdS nanorods and Nafion composite film on carbon ionic liquid electrode

In this paper the direct electron transfer of hemoglobin (Hb) was carefully investigated by using a room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆) modified carbon paste electrode (CILE) as the basal working electrode. Hb was immobilized on the surface of CILE with the nanocomposite film composed of Nafion and CdS nanorods by a step-by-step method. UV–vis and FT-IR spectra showed that Hb in the composite film remained its native structure. The direct electrochemical behaviors of Hb in the composite film were further studied in a pH 7.0 phosphate buffer solution (PBS). A pair of well-defined and quasi-reversible cyclic voltammetric peaks of Hb was obtained with the formal potential (E⁰′) at −0.295 V (vs. SCE), which was the characteristic of heme Fe(III)/Fe(II) redox couples. The direct electrochemistry of Hb was achieved on the modified electrode and the apparent heterogeneous electron transfer rate constant (k_s) was calculated to be 0.291 s⁻¹. The formal potentials of Hb Fe(III)/Fe(II) couple shifted negatively with the increase of buffer pH and a slope value of −45.1 mV/pH was got, which indicated that one electron transfer accompanied with one proton transportation. The fabricated Hb sensor showed good electrocatalytic manner to the reduction of trichloroacetic acid (TCA).     

Capacitance properties of electrochemically deposited polyazulene films

Polyazulene films formed by electrochemical oxidation of azulene have been studied as active components in electrochemical capacitors. The film shows reversible electrochemical behavior in the positive potential range and exhibits p-doping properties. The influence of film formation conditions on the films electrochemical properties has been investigated. A strong effect of solvent on the polyazulene deposition has been observed. The highest yield of film deposition was found for dichloromethane. Polyazulene films also exhibit stable voltammetric properties in aprotic solvents. The voltammetric response of the film is affected by the size of the anion of the supporting electrolyte. In solutions containing tetra(alkyl)ammonium perchlorates, tetrafluoroborates or hexafluorophosphates, reversible oxidation of polyazulene is obtained. In the presence of large tetra(phenyl)borate anions, polyazulene is irreversibly oxidized upon electrochemical oxidation. The capacitance properties of these materials have been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The polyazulene film displays a relatively high specific capacitance close to 400 F g⁻¹. Such high value of C_s locates this material among very good polymeric redox pseudo-capacitors.     

Preparation of polypyrrole/ferrocyanide films modified carbon paste electrode and its application on the electrocatalytic determination of ascorbic acid

Functionalized polypyrrole film were prepared by incorporation of (Fe(CN)₆)⁴⁻ as doping anion, during the electropolymerization of pyrrole onto a carbon paste electrode (CPE) in aqueous solution by using potentiostatic method. The electrochemical behavior of the (Fe(CN)₆)³⁻/(Fe(CN)₆)⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry and double step potential chronoamperometry methods. In this study, an obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole/ferrocyanide films modified carbon paste electrode (Ppy/FCNMCPEs) was demonstrated by oxidation of ascorbic acid. It has been found that under optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such electrode occurs at a potential about 540 mV less positive than unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and catalytic reaction rate constant, k_h′, were also determined by using various electrochemical approaches.The catalytic oxidation peak current showed a linear dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 4.5×10⁻⁴ to 9.62×10⁻³ M of ascorbic acid with a correlation coefficient of 0.9999. The detection limit (2σ) was determined as 5.82×10⁻⁵ M.     

Electrochemical synthesis and anticorrosive properties of Nafion-poly(aniline-co-o-aminophenol) coatings on stainless steel

The objective of this work was to compare the electrochemical behavior and possible anticorrosive properties of composite with Nafion^®, poly(aniline-co-o-aminophenol) (P(An-co-OAP)) and polyaniline (PAn) films with those of corresponding simple films. The electrochemical synthesis of polymer films was carried out on stainless steel AISI 304 (SS) surfaces by using the cyclic potential sweep (CPS) deposition. Scanning electron microscopy (SEM) was used for the characterization of the structure and morphology of deposited films. Evaluation of anticorrosive properties of films in 0.5 M H₂SO₄ without and with chlorides was achieved by monitoring the open circuit potential (E_OC) of coated SS electrodes as well as by tracing the anodic current-potential polarization curves. These studies have shown that the SS remains in its passive state in the presence of polymer coatings. Composite with Nafion^®, P(An-co-OAP) and PAn films, keep their redox activity in chloride-containing acid solutions providing almost a complete protection of the SS substrate against pitting corrosion. These films prevent chloride exchange with solution because of the cation permselectivity of the Nafion^® membrane. The charge compensation during redox reactions occurs mainly by protons since sulfonate groups of Nafion^® act as dopants in composite films. The redox behavior of the Nafion^®-P(An-co-OAP) film is improved as compared with that of the Nafion^®-PAn film in both Cl⁻-free and Cl⁻-containing solutions. This behavior may be ascribed to the functional group -OH that facilitates charge compensation through proton during redox reactions.     

Electrosynthesis and characterization of poly(2-[(E)-2-azulen-1-ylvinyl] thiophene) using polyazulene as model compound

Electrochemical polymerization of azulene and 2-[(E)-2-azulen-1-ylvinyl] thiophene has been studied in this work. Characterization of the formed films was done by cyclic voltammetry (CV), in situ UV-vis absorption spectroscopy and by scanning electron microscopy (SEM). Polymerization was performed by CV in a three-electrode electrochemical cell in 0.1 M tetrabutylammonium hexafluorophosphate-acetonitrile (TBAPF₆-ACN) within two different potential ranges. The redox behavior of the films was studied by CV in monomer-free TBAPF₆-ACN electrolyte solution. The electrochemical response from the anodic charging (p-doping) in the different films consisted of symmetric and well-resolved redox peaks. During electrochemical doping changes in the UV-vis spectra can be seen due to transformation of the films from the neutral into the doped form. Poly(2-[(E)-2-azulen-1-ylvinyl] thiophene), in particular shows a very broad absorbance spectrum starting at 300 nm extending to 900 nm. Morphologies of the electrosynthesized films were studied by SEM.     

n-Type nitrogenated nanocrystalline diamond thin-film electrodes: The effect of the nitrogenation on electrochemical properties

Nitrogenated nanocrystalline diamond thin-film electrodes with controlled conductivity are grown from microwave- or arc-plasma in CH₄-Ar-H₂-N₂ gas mixtures. Their electrochemical behavior is studied using cyclic voltammetry and electrochemical impedance spectroscopy techniques. It is concluded from Mott-Schottky plots that the studied material has n-type conductance; the donor concentration is estimated. The character of electrode behavior is controlled by the degree of nitrogenation of the material. In particular, with the increasing of nitrogen concentration in the feeding gas (0-25%) supplied to plasma-chemical reactor, the potential window in the supporting electrolyte (2.5 M H₂SO₄) becomes somewhat narrower, the reversibility of electrochemical reactions in the [Fe(CN)₆]^3−/4− redox couple becomes more pronounced. Kinetic parameters of redox reactions in this couple are determined. By and large, with the increasing of the nitrogenation the electrochemical behavior of “poor conductor” gives way to that of metal-like conductor.     

Electro-Fenton degradation of azo dye using polypyrrole/anthraquinonedisulphonate composite film modified graphite cathode in acidic aqueous solutions

Amaranth azo dye has been degraded by electro-Fenton method using an undivided cell containing the polypyrrole (PPy)/anthraquinonedisulphonate (AQDS) composite film modified graphite cathode and Pt anode. In acidic media, the PPy/AQDS composite film exhibits the characteristic of gas diffusion cathode and is highly efficient for hydrogen peroxide electrogeneration with high generation rate and current efficiency. This new electro-Fenton system can degrade amaranth azo dye efficiently in various acidic solutions. The amaranth decay and total organic carbon (TOC) removal were determined as a function of pH, cathode potential, Fe²⁺ and doping AQDS concentrations. Total dye decay and 80.3% mineralization were achieved at the optimum conditions (pH 3.0, E_cath = −0.65 V vs. SCE, 2.0 mM Fe²⁺ concentration). The electrochemical stability and electrocatalytic activity of the composite film after use in electro-Fenton process were also investigated using cyclic voltammetry (CV) and Fourier transfer infrared (FTIR) spectroscopy technologies.     

Preparation and characterization of osmium hexacyanoferrate films and their electrocatalytic properties

Osmium hexacyanoferrate films have been prepared using repeated cyclic voltammetry, and the deposition process and the films’ electrocatalytic properties in electrolytes containing various cations have been investigated. The cyclic voltammograms recorded the deposition of osmium hexacyanoferrate films directly from the mixing of Os³⁺ and Fe(CN)₆³⁻ ions from solutions containing various cations. An electrochemical quartz crystal microbalance, cyclic voltammetry, and UV-visible spectroscopy were used to study the growth mechanism of the osmium hexacyanoferrate films. The osmium hexacyanoferrate films showed a single redox couple, and the redox reactions included “electron transfer” and “proton transfer” with a formal potential that demonstrates a proton effect in acidic solutions up to a 12 M aqueous HCl solution. The electrochemical and electrochemical quartz crystal microbalance results indicate that the redox process was confined to the immobilized osmium hexacyanoferrate film. The electrocatalytic reduction of dopamine, epinephrine, norepinephrine, S₂O₃²⁻, and SO₅²⁻ by the osmium hexacyanoferrate films was performed. The preparation and electrochemical properties of co-deposited osmium(III) hexacyanoferrate and copper(II) hexacyanoferrate films were determined, and their two redox couples showed formal potentials that demonstrated a proton effect and an alkaline cation effect, respectively. Electrocatalytic reactions on the hybrid films were also investigated.     

Preparation and electrochemistry of cadmium pentacyanonitrosylferrate film modified glassy carbon electrode

A glassy carbon (GC) electrode surface was modified with a cadmium pentacyanonitrosylferrate (CdPCNF) film as a novel electrode material. The modification procedure of the GC surface includes two consecutive procedures: (i) the electrodeposition of metallic cadmium on the GC electrode surface from a CdCl₂ solution and (ii) the chemical transformation of the deposited cadmium to the CdPCNF films in 0.05 M Na₂[Fe(CN)₅NO] + 0.5 M KNO₃ solution. The modified GC electrode showed a well-defined redox couple due to [Cd^IIFe^III/II(CN)₅NO]^0/−1 system. The effects of supporting electrolytes and solution pH were studied on the electrochemical behavior of the modified electrode. The diffusion coefficients of alkali-metal cations in the film (D), the transfer coefficient (α) and the charge transfer rate constant at the modifying film | electrode interface (k_s), were calculated in the presence of various alkali-metal cations. The stability of the modified electrode was investigated under various experimental conditions.     

Glassy carbon electrode modified with Nafion-Au colloids for clenbuterol electroanalysis

Stable Nafion-Au colloids were immobilized on a glassy carbon electrode (GCE) for detection of β-agonist clenbuterol by electroanalysis. The Au colloids were prepared by a one-step electrodeposition onto GCE, with obvious electrocatalytic activity present. The negatively charged Nafion film was an efficient barrier to negatively charged interfering compounds, resulting in accumulation of positively charged clenbuterol at the Nafion film. The electrochemical characters of the electrode during various modified steps in a redox probe system of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] were confirmed by cyclic voltammetry (CV) and AC-impedance. In Britton-Robinson (B-R) buffer solution (pH = 2.0) and the potential range of −0.2 to 1.2 V, the Nafion-Au colloid modified electrode, compared to a bare GCE, exhibits obvious electrocatalytic activity towards the redox of clenbuterol by greatly enhancing the peak current with a linear calibration curve from 8.0 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L and a detection limit of (1.0 × 10⁻⁷ mol/L) (R = 0.996). The modified electrode shows high sensitivity, selectivity and reproducibility. The recovery for detecting clenbuterol (∼10⁻⁶ mol/L) in human serum is up to 98.19%.     

Electrochemical investigation of the influence of thin SiOx films deposited on gold on charge transfer characteristics

The paper reports on the investigation of the electrochemical behavior of a thin gold film electrode coated with silicon dioxide (SiO_x) layers of increasing thickness. Stable thin films of amorphous silica (SiO_x) were deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using plasma-enhanced chemical vapor deposition (PECVD) technique. Scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS) were used to investigate the electrochemical behavior of the interfaces. In the case of SECM, the influence of the SiO_x thicknesses on the electron transfer kinetics of three redox mediators was investigated. Normalized current-distance curves (approach curves) were fitted to the theoretical model in order to find the effective heterogeneous first order rate constant (k_eff) at the sample. EIS was in addition used to confirm the diffusion barrier character of the SiO_x interlayer.     

Electrochemical performances of poly(3,4-ethylenedioxythiophene)-NiFe2O4 nanocomposite as electrode for supercapacitor

Poly 3,4-ethylenedioxythiophene (PEDOT)-based NiFe₂O₄ conducting nanocomposites were synthesized and their electrochemical properties were studied in order to find out their suitability as electrode materials for supercapacitor. Nanocrystalline nickel ferrites (5-20 nm) have been synthesized by sol-gel method. Reverse microemulsion polymerization in n-hexane medium for PEDOT nanotube and aqueous miceller dispersion polymerization for bulk PEDOT formation using different surfactants have been adopted. Structural morphology and characterization were studied using XRD, SEM, TEM and IR spectroscopy. Electrochemical performances of these electrode materials were carried out using cyclic voltammetry at different scan rates (2-20 mV/s) and galvanostatic charge-discharge at different constant current densities (0.5-10 mA/cm²) in acetonitrile solvent containing 1 M LiClO₄ electrolyte. Nanocomposite electrode material shows high specific capacitance (251 F/g) in comparison to its constituents viz NiFe₂O₄ (127 F/g) and PEDOT (156 F/g) where morphology of the pore structure plays a significant role over the total surface area. Contribution of pseudocapacitance (C_FS) arising from the redox reactions over the electrical double layer capacitance (C_DL) in the composite materials have also been investigated through the measurement of AC impedance in the frequency range 10 kHz-10 mHz with a potential amplitude of 5 mV. The small attenuation (∼16%) in capacitance of PEDOT-NiFe₂O₄ composite over 500 continuous charging/discharging cycles suggests its excellent electrochemical stability.     

Electrocatalytic oxidation of some amino acids on a nickel-curcumin complex modified glassy carbon electrode

This study investigated the electrocatalytic oxidation of alanine, l-arginine, l-phenylalanine, l-lysine and glycine on poly-Ni(II)-curcumin film (curcumin: 1,7-bis [4-hydroxy-3-methoxy phenyl]-1,6-heptadiene-3,5-dione) electrodeposited on a glassy carbon electrode in alkaline solution. The process of oxidation and its kinetics were established by using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy techniques. Voltammetric studies indicated that in the presence of amino acids the anodic peak current of low valence nickel species increased, followed by a decrease in the corresponding cathodic current. This indicates that amino acids were oxidized on the redox mediator which was immobilized on the electrode surface via an electrocatalytic mechanism. Using Laviron's equation, the values of α and k_s for the immobilized redox species were determined as 0.43 ± 0.03 and 2.47 ± 0.02 × 10⁶ s⁻¹, respectively. The rate constant, the electron transfer coefficient and the diffusion coefficients involved in the electrocatalytic oxidation of amino acids were determined.     

The impedance of fast charge transfer reactions on boron doped diamond electrodes

Reversible charge transfer on boron doped diamond (BDD) electrodes was studied using cyclic voltammetry and electrochemical impedance spectroscopy. Polycrystalline diamond films of 5 μm thickness with 200 and 3000 ppm boron content were prepared by chemical vapour deposition on niobium substrate. The samples were mounted in a Teflon holder and used as rotating disk electrodes (RDE) with rotation frequencies between 0 and 4000 rpm. The electrochemical measurements were carried out in aqueous electrolyte solutions of 0.5 M Na₂SO₄ + 5 mM K₃[Fe(CN)₆]/K₄[Fe(CN)₆] and 0.1 M KCl + 5 mM [Ru(NH₃)₆]Cl₂/[Ru(NH₃)₆]Cl₃. The electrochemical redox behaviour of the BDD electrodes was found to differ significantly from that of an active Pt electrode. The deviations are indicated by a large peak potential difference and a shift of the peak potentials in cyclic voltammograms with increasing sweep rate. At rotating electrodes lower limiting current densities are found and the impedance diagrams exhibit an additional capacitive impedance element at high frequencies. The results are described quantitatively by an impedance model which is based on partial blocking of the diamond surface.