Adaptive Load-Aware Congestion Control Protocol for Wireless Sensor Networks

Congestion control in wireless sensor networks (WSNs) is crucial. In this article, we discuss congestion control and the adaptive load-aware problem for sensor nodes in WSNs. When the traffic load of a specific node exceeds its the available capacity of the node, a congestion problem occurs because of buffer memory overflow. Congestion may cause serious problems such as packet loss, the consumption of power, and low network throughput for sensor nodes. To address these problems, we propose a distributed congestion control protocol called adaptive load-aware congestion control protocol (ALACCP). The protocol can adaptively allocate the appropriate forwarding rate for jammed sensor nodes to mitigate the congestion load. Through the buffer management mechanism, the congestion index of neighboring sensor nodes, and an adjustment of the adaptive forwarding rate, the degree of congestion is alleviated markedly. The performance in allocating the forwarding rate effectively to neighboring sensor nodes also improves. The ALACCP can avoid packet loss because of traffic congestion, reduce the power consumption of nodes, and improve the network throughput. Simulation results revealed that the proposed ALACCP can effectively improve network performance and maintain the fairness of networks.     

A New Method to Find a High Reliable Route in IoT by Using Reinforcement Learning and Fuzzy Logic

Recently, Internet is moving quickly toward the interaction of objects, computing devices, sensors, and which are usually indicated as the Internet of things (IoT). The main monitoring infrastructure of IoT systems main monitoring infrastructure of IoT systems is wireless sensor networks. A wireless sensor network is composed of a large number of sensor nodes. Each sensor node has sensing, computing, and wireless communication capability. The sensor nodes send the data to a sink or a base station by using wireless transmission techniques However, sensor network systems require suitable routing structure to optimizing the lifetime. For providing reasonable energy consumption and optimizing the lifetime of WSNs, novel, efficient and economical schemes should be developed. In this paper, for enhancing network lifetime, a novel energy-efficient mechanism is proposed based on fuzzy logic and reinforcement learning. The fuzzy logic system and reinforcement learning is based on the remained energies of the nodes on the routes, the available bandwidth and the distance to the sink. This study also compares the performance of the proposed method with the fuzzy logic method and IEEE 802.15.4 protocol. The simulations of the proposed method which were carried out by OPNET (Optimum Network performance) indicated that the proposed method performed better than other protocols such as fuzzy logic and IEEE802.15.4 in terms of power consumption and network lifetime.

     

面向物联网的无线传感器网络综述

在分析无线传感器网络国内外研究现状及技术成熟度的基础上,从技术层面阐述了无线传感器网络与物联网之间的相互关系,总结了无线传感器网络系统执行所需要的信息采集系统设计、网络服务支持和网络通信协议设计等关键技术,说明了无线传感器网络未来发展所面临的挑战,并提出了面向物联网的无线传感器网络发展新思路。     

Industrial wireless sensor and actuator networks in industry 4.0: Exploring requirements,protocols, and challenges—A MAC survey

The vision to connect everyday physical objects to the Internet promises to create the Internet of Things (IoT), which is expected to integrate the diverse technologies such as sensors, actuators, radio frequency identification, communication technologies, and Internet protocols. Thus, IoT promises to transfer traditional industry to advance digital industry known as the Industry 4.0. At the core of the Industry 4.0 are the wireless sensor networks (WSNs) and wireless sensor and actuator networks (WSANs) that led to the development of industrial wireless sensor networks (IWSNs) and industrial wireless sensor and actuator networks (IWSANs). These networks play a central role of connecting machines, parts, products, and humans and create a diverse set of new applications to support intelligent and autonomous decision making. The IWSAN is a promising technology for numerous industrial applications because of their several potential benefits such as simple deployment, low cost, less complexity, and mobility support. However, despite such benefits, they impose several unique challenges at different layers of the protocol stack when deploying them for various monitoring and control applications in the Industry 4.0. In this article, we explore IWSAN, its applications, requirements, challenges, and solutions in the context of industrial control applications. Our main focus is on the medium access control (MAC) layer that can be exploited to satisfy such requirements. Our discussion presents extensive background study of the MAC schemes and it reviews the MAC protocols of the existing wireless standards and technologies. A number of application‐specific MAC protocols developed to support industrial applications, which are not part of these standards, are also elaborated. We rationalize to what extent the existing standards and protocols help in solving such requirements as laid down by the Industry 4.0. In the end, we emphasize on existing challenges and present important future directions.     

基于发布/订阅模型的WSN设计

为降低通信频率对节点能耗的影响同时提高大规模节点下传感器网络的连通率,本文设计了一种以发布/订阅模型作为应用层数据交互方式的无线传感器网络。该网络利用6LoWPAN技术实现组网,并以Contiki操作系统为平台完成了基于发布/订阅模型的MQTT-S应用层协议设计。测试结果表明,该设计能够有效降低节点的通信流量,实现对节点功耗以及网络通信优化,并能与互联网实现无缝连接减少开发成本,对大规模传感器网络的设计与应用具有重要意义。     

Throughput Evaluation of a Novel Scheme to Mitigate the Congestion over WSNs

In recent years, due to fast development of wireless sensor networks (WSNs), the numbers of nodes are increasing, and their scope of applications is continuously expanding, including environmental monitoring, military and smart home applications. The power supply, memory and computing power of wireless sensor nodes are greatly hampered in WSNs so that the WSNs are classified as a task-oriented framework. This study focused on exploring problems caused by traffic congestion on the WSNs with a large amount of flow, such as packet loss, bandwidth reduction, and waste of energy on the sensor nodes. On the other hand, a cooperative strong node mechanism is presented and named as Cooperative Strong Node Mechanism, in which a threshold is set to determine whether the node traffic is over or not. When the load exceeds, the privilege of corresponding sensor nodes is upgraded so that it can command its child nodes to change the transmission path to distribute the traffic effectively. Furthermore, when the traffic exceeds preset overall network flow, new sensor nodes are added in the network to relieve the traffic. This novel proposed mechanism can not only increase network throughput and effectively prevent the occurrence from congestion problems, but is suitable for a variety of routing protocols.     

Hierarchical Tree Alternative Path (HTAP) algorithm for congestion control in wireless sensor networks

Recent advances in wireless sensor networks (WSNs) have lead to applications with increased traffic demands. Research is evolving from applications where performance is not considered as a crucial factor, to applications where performance is a critical factor. There are many cases in the fields of automation, health monitoring, and disaster response that demand wireless sensor networks where performance assurances are vital, especially for parameters like power, delay, and reliability. Due to the nature of these networks the higher amount of traffic is observed when the monitored event takes place. Exactly at this instance, there is a higher probability of congestion appearance in the network. Congestion in WSNs is tackled by the employment of two methods: either by reducing the load (“traffic control”), or by increasing the resources (“resource control”). In this paper we present the Hierarchical Tree Alternative Path (HTAP) algorithm, a “resource control” algorithm that attempts, through simple steps and minor computations, to mitigate congestion in wireless sensor networks by creating dynamic alternative paths to the sink. HTAP is evaluated in several scenarios in comparison with another “resource control” algorithm (TARA), as well as with a “traffic control” algorithm (SenTCP), and also the case where no congestion control exists in the network (“no CC”). Results show that HTAP is a simple and efficient algorithm capable of dealing successfully with congestion in WSNs, while preserving the performance characteristics of the network.     

Effect of Co-channel Interference on Two-Way Untrustworthy Relay Selection

Wireless Personal Communications - In wireless sensor networks (WSNs), traffic flow congestion can reduce network performance. We propose a congestion control method for WSNs that use a cache state...     

Modulated relay based stable election protocol for large-scale wireless sensor networks

Internet of things (IoT) applications based on wireless sensor networks (WSNs) have recently gained vast momentum. These applications vary from health care, smart cities, and military applications to environmental monitoring and disaster prevention. As a result, energy consumption and network lifetime have become the most critical research area of WSNs. Through energy-efficient routing protocols, it is possible to reduce energy consumption and extend the network lifetime for WSNs. Using hybrid routing protocols that incorporate multiple transmission methods is an effective way to improve network performance. This paper proposes modulated R-SEP (MR-SEP) for large-scale WSN-based IoT applications. MR-SEP is based on the well-known stable election protocol (SEP). MR-SEP defines three initial energy levels for the nodes to improve the network energy distribution and establishes multi-hop communication between the cluster heads (CHs) and the base station (BS) through relay nodes (RNs) to reduce the energy consumption of the nodes to reach the BS. In addition, MR-SEP reduces the replacement frequency of CHs, which helps increase network lifetime and decrease power consumption. Simulation results show that MR-SEP outperforms SEP, LEACH, and DEEC protocols by 70.2%, 71.58%, and 74.3%, respectively, in terms of lifetime and by 86.53%, 86.68%, and 86.93% in terms of throughput.     

Development of a novel 6LoWPAN-based multipurpose sensor monitoring and notification system

In the area of wireless communication technologies, 6LoWPAN leverages the extensive capabilities of IPv6, even within the constraints imposed by resource-limited devices, particularly within wireless sensor networks (WSNs). The integration of 6LoWPAN into modern solutions for implementing the IPv6-based Internet of Things (IoT) is becoming increasingly important. In this paper, a sensor monitoring and notification system specifically designed for deployment over 6LoWPAN has been proposed. Multipurpose capability, scalability, and ease of deployability are the main features of the proposed system. Its architecture reflects the highest degree of flexibility and allows for a variety of use cases encountered in practical scenarios. In addition, a web interface has been developed as part of the comprehensive system architecture. This interface enables efficient management of the entire system and facilitates connection for new users and seamless integration of additional sensors. By encapsulating complex functions in a user-friendly interface, the system promotes accessibility, convenience, and an enhanced user experience. The proposed system overcomes the limitations of current approaches, thereby creating new opportunities. The flexibility of the proposed system allows it to be applied to various use cases.     

EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications

The wireless sensor network based IoT applications mainly suffers from end to end delay, loss of packets during transmission, reduced lifetime of sensor nodes due to loss of energy. To address these challenges, we need to design an efficient routing protocol that not only improves the network performance but also enhances the Quality of Service. In this paper, we design an energy-efficient routing protocol for wireless sensor network based IoT application having unfairness in the network with high traffic load. The proposed protocol considers three-factor to select the optimal path, i.e., lifetime, reliability, and the traffic intensity at the next-hop node. Rigorous simulation has been performed using NS-2. Also, the performance of the proposed protocol is compared with other contemporary protocols. The results show that the proposed protocol performs better concerning energy saving, packet delivery ratio, end-to-end delay, and network lifetime compared to other protocols.

     

An Efficient Secure Authentication and Key Establishment Scheme for M2M Communication in 6LoWPAN in Unattended Scenarios

Machine-to-machine (M2M) is an important part of Internet of Things (IoT), and is used to describe those technologies applied in wireless communication automatically between mechanics or electronics instruments. With the rapid development and wide application of the Internet of Things, IETF is assigned to design IPv6 over low power wireless personal area network (6LoWPAN). The address of IPv6 is indefinite, which means it can satisfy addressing requirements for M2M. The 6LoWPAN standard has clarified important issues in M2M, but communication security has not been effectively resolved. In this article, we analyzed the existing security protocol for M2M communication in 6LoWPAN. The analysis result shows that the protocol has the defect of data leakage after the node is captured. In addition, the EAKES6Lo protocol is also vulnerable to sinkhole attacks and plaintext-chosen attacks. Based on the above analysis, an M2M communication mutual authentication protocol based on 6LoWPAN in unattended operation is proposed. The protocol establishes a reasonable secret key distribution mechanism and designs an anti-capture attack detection method for unattended nodes to resist attacks, such as replay attacks, sinkhole attacks, plaintext-chosen attacks, and physical capture attacks. Finally, the security of the protocol is proved by BAN.

     

Load balancing clustering and routing for IoT-enabled wireless sensor networks

Internet of things (IoT) devices are equipped with a number of interconnected sensor nodes that relies on ubiquitous connectivity between sensor devices to optimize information automation processes. Because of the extensive deployments in adverse areas and unsupervised nature of wireless sensor networks (WSNs), energy efficiency is a significant aim in these networks. Network survival time can be extended by optimizing its energy consumption. It has been a complex struggle for researchers to develop energy-efficient routing protocols in the field of WSNs. Energy consumption, path reliability and Quality of Service (QoS) in WSNs became important factors to be focused on enforcing an efficient routing strategy. A hybrid optimization technique presented in this paper is a combination of fuzzy c-means and Grey Wolf optimization (GWO) techniques for clustering. The proposed scheme was evaluated on different parameters such as total energy consumed, packet delivery ratio, packet drop rate, throughput, delay, remaining energy and total network lifetime. According to the results of the simulation, the proposed scheme improves energy efficiency and throughput by about 30% and packet delivery ratio and latency by about 10%, compared with existing protocols such as Chemical Reaction Approach based Cluster Formation (CHRA), Hybrid Optimal Based Cluster Formation (HOBCF), GWO-based clustering (GWO-C) and Cat Swarm Optimization based Energy-Efficient Reliable sectoring Scheme with prediction algorithms (P_CSO_EERSS). The study concludes that the protocol suitable for creating IoT monitoring system network lifetime is an important criteria.     

IBLEACH: intra-balanced LEACH protocol for wireless sensor networks

Wireless sensor networks (WSNs) are composed of many low cost, low power devices with sensing, local processing and wireless communication capabilities. Recent advances in wireless networks have led to many new protocols specifically designed for WSNs where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. Minimizing energy dissipation and maximizing network lifetime are important issues in the design of routing protocols for WSNs. In this paper, the low-energy adaptive clustering hierarchy (LEACH) routing protocol is considered and improved. We propose a clustering routing protocol named intra-balanced LEACH (IBLEACH), which extends LEACH protocol by balancing the energy consumption in the network. The simulation results show that IBLEACH outperforms LEACH and the existing improvements of LEACH in terms of network lifetime and energy consumption minimization.     

Towards a classification of energy aware MAC protocols for wireless sensor networks

Power management is an important issue in wireless sensor networks (WSNs) because wireless sensor nodes are usually battery powered, and an efficient use of the available battery power becomes an important concern specially for those applications where the system is expected to operate for long durations. This necessity for energy efficient operation of a WSN has prompted the development of new protocols in all layers of the communication stack. Provided that, the radio transceiver is the most power consuming component of a typical sensor node, large gains can be achieved at the link layer where the medium access control (MAC) protocol controls the usage of the radio transceiver unit. MAC protocols for sensor networks differ greatly from typical wireless networks access protocols in many issues. MAC protocols for sensor networks must have built‐in power conservation, mobility management, and failure recovery strategies. Furthermore, sensor MAC protocols should make performance trade‐off between latency and throughput for a reduction in energy consumption to maximize the lifetime of the network. This is in general achieved through duty cycling the radio transceiver. Many MAC protocols with different objectives were proposed for wireless sensor networks in the literature. Most of these protocols take into account the energy efficiency as a main objective. There is much more innovative work should be done at the MAC layer to address the hard unsolved problems. In this paper, we first outline and discuss the specific requirements and design trade‐offs of a typical wireless sensor MAC protocol by describing the properties of WSN that affect the design of MAC layer protocols. Then, a typical collection of wireless sensor MAC protocols presented in the literature are surveyed, classified, and described emphasizing their advantages and disadvantages whenever possible. Finally, we present research directions and identify open issues for future medium access research. Copyright © 2009 John Wiley & Sons, Ltd.     

A New Lightweight User Authentication and Key Agreement Scheme for WSN

The Internet of Things (IoT) is one of the most up-to-date and newest technologies that allows remote control of heterogeneous networks and has a good outlook for industrial applications. Wireless sensor networks (or in brief WSNs) have a key role on the Internet of industrial objects. Due to the limited resources of the sensor nodes, designing a balanced authentication scheme to provide security in reasonable performance in wireless sensor networks is a major challenge in these applications. So far, several security schemes have been presented in this context, but unfortunately, none of these schemes have provided desired security in reasonable cost. In 2017, Khemissa et al. proposed a security protocol for mutual authentication between sensor node and user in WSNs, however, in this paper we show that this protocol is not safe enough in the confrontation of desynchronization, user impersonation and gateway impersonation attacks. The proposed attacks succeed with the probability of one and to be realized only require an execution of the protocol. Given merits of the Khemissa et al.’s protocol, we also improved their protocol in such a way that provides suitable level of security, and also we prove its security using two formal ways, i.e. BAN logic and also the Scyther tool. We also argue informally about the improved protocol’s security.

     

QoS evaluation of energy-efficient ML-MAC protocol for wireless sensor networks

Power management is an important issue in wireless sensor networks (WSNs) because wireless sensor nodes are usually battery powered, and an efficient use of the available battery power becomes an important concern specially for those applications where the system is expected to operate for long durations. This necessity for energy efficient operation of a WSN has prompted the development of new protocols in all layers of the communication stack. If the radio transceiver is the most power consuming component of a typical sensor node, large gains can be achieved at the link layer where the medium access control (MAC) protocol controls the usage of the radio transceiver unit.     

基于无线传感器网络的跨层拥塞控制协议

无线传感器网络(WSN)中由拥塞引起的大量分组重传以及重传多次失败后的分组丢弃会导致较长的时延、较高的分组丢失率和较多的能量消耗.为了准确探测和控制网络拥塞,提出了一种基于跨层设计的拥塞控制协议,即上行拥塞控制(UCC)协议.该协议利用节点在媒质接人控制(MAC)层中未占用的缓冲器区间大小和所预测的通信流量作为该节点的...     

Impact of MAC frame length on energy efficiency in 6LowPAN

To reach necessary end-to-end connectivity between the Internet and wireless sensor networks （WSNs）, the Internet Engineering Task Force （IETF） IPv6 over low power wireless personal area network （6LowPAN） working group has been established and introduced an adaptation layer for integration of IEEE 802.15.4 physical layer/media access control （PHY/MAC） layers and the upper layers of any Intemet protocol （IP）-based networks, such as the Internet. The energy efficiency is one of the most important performance measures in WSNs because most sensor nodes are only battery powered so we should reduce the energy consumption to the lowest to extend the life of nodes. Therefore the determination of MAC frame length should be carefully considered since that the radio frequency （RF） module consumes most the energy of a sensor node meanwhile the MAC protocol is the direct controller of RF module. In this paper, we provide a star-shaped 6LowPAN non-beacon mode with unslotted carrier sense multiple access with collision avoidance （CSMA/CA） mechanism to access to the channel and model the stochastic behavior of a target end node as the M/G/1 queuing system. Analytical expressions for some parameters such as channel busy probability, packet loss probability and energy efficiency are obtained in this paper and our analytical results can clearly show the impact of MAC frame length on the energy efficiency of a target node in both ideal and lossy channel.     

Security and Privacy in IoT: A Survey

The Internet of Things (IoT) is a network of globally connected physical objects, which are associated with each other via Internet. The IoT foresees the interconnection of few trillions of intelligent objects around us, uniquely and addressable every day, these objects have the ability to accumulate process and communicate data about themselves and their surrounding environment. The best examples of IoT systems are health care, building smart city with advance construction management system, public and defense surveillance and data acquisition. Recent advancement in the technology has developed smart and intelligent sensor nodes and RFIDs lead to a large number of wireless networks with smart and intelligent devices (object, or things) connected to the Internet continuously transmit the data. So to provide security and privacy to this data in IoT is a very challenging task, which is to be concerned at highest priority for several current and future applications of IoT. Devices such as smart phone, WSNs and RFIDs etc., are the major components of IoT network which are basically resource constrained devices. Design and development of security and privacy management schemes for these devices is guided by factors like good performance, low power consumption, robustness to attacks, tampering of the data and end to end security. Security schemes in IoT provide unauthorized access to information or other objects by protecting against alterations or destruction. Privacy schemes maintain the right to control about the collected information for its usage and purpose. In this paper, we have surveyed major challenges such as Confidentiality, Integrity, Authentication, and Availability for IoT in a brief manner.