Photoinitiating polymerization to prepare biocompatible chitosan hydrogels

Chitosan hydrogels were prepared from water soluble chitosan derivatives (chitosan‐MA‐LA, CML) by photoinitiating polymerization under the existence of Irgacure2959 and the irradiation of UV light. The CML was obtained by amidation of the amine groups of chitosan with lactic acid and methacrylic acid. Gelation time of the hydrogel could be adjusted within a range of 5–50 min, and controlled by factors such as the degree of MA substitution, initiator concentration, existence of oxygen, and salt. The dry hydrogel adsorbed tens to hundred times of water, forming a highly hydrated gel. The swelling ratio was smaller at the higher degree of MA substitution, higher pH, and higher salt concentration. Rheological test showed that the hydrogel is elastomeric in the measuring frequency range, with a storage modulus and loss modulus of 0.8–7 kPa and 10–100 Pa, respectively. In vitro culture of chondrocytes demonstrated that the cells could normally proliferate in the extractant of the hydrogels, showing no cytotoxicity at lower initiator concentration. By contrast, the extractant of the hydrogel made by the redox initiating system, i.e., ammonium persulfate (APS) and N,N,N′,N′‐tetramethylethylenediamine (TEMED), showed apparent cytotoxicity. Thus, the chitosan hydrogels initiated by the Irgacure2959 have better comprehensive properties, in particular better biocompatibility, and are more suitable for biomedical applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Controlled release of Montelukast Sodium from pH-sensitive injectable hydrogels

pH sensitive hydrogels showed excellent drug release properties, with promise for other biomedical applications. Also, the impact of molecular weight (MW) and degree of deacetylation (DDA) of chitosan on the fabricated chitosan/poly (vinyl alcohol) (3:1 mol ratio) hydrogel with selective silane crosslinker amount was evaluated for controlled drug delivery. The FTIR spectroscopy confirmed the incorporated components and the developed interactions among the polymer chains. The hydrogel characteristics were expressed by their responsive behaviour in different environments (water, ionic media and pH). The hydrogel sample (CH1000) having chitosan with higher MW and DDA exhibited more thermal stability and bacterial growth inhibition against E.coli. All hydrogels exhibited maximum swelling at basic and neutral pH and less swelling was observed in acidic media. For drug release analysis performed in simulated gastric fluid, hydrogel showed controlled drug release in 2 h but it was more than 10%, consequently cannot be used for oral purpose. In simulated intestinal fluid, hydrogels exhibited more than 80% release within 90 min. This characteristic phenomenon at neutral pH empowered hydrogel appropriate towards injectable and targeted controlled release of applicable drug. It was concluded that the prepared hydrogel can be administered directly into the venous circulation through syringe and can be used with better results for biomedical applications.     

Carbon nanotube‐hybridized supramolecular hydrogel based on PEO‐b‐PPO‐b‐PEO/α‐cyclodextrin as a potential biomaterial

In virtue of the potential biomedical application of carbon nanotube (CNT), the CNT was hybridized into a supramolecular hydrogel based on the selective inclusion of α‐cyclodextrin (α‐CD) onto poly(ethylene oxide) (PEO) segments of a triblock copolymer, i.e., PEO‐block‐poly(propylene oxide)‐block‐PEO. Different from the previous report, the content of α‐CD, in contrast to that of ethylene oxide unit, was decreased to decrease the network density in hydrogel and hence improve the diffusion of encapsulated substances. As a result, the modulus of the hydrogels climbed slightly after introducing CNT. Furthermore, as the essential properties for wound dressing, the antimicrobial activity, the skin‐adhesion, and water‐retention of such supramolecular hybrid hydrogels were also verified. On the other hand, the supramolecular hybrid hydrogels inherited the shear‐thinning property and are suitable as an injectable biomaterial. The cell viability assay confirmed the equivalent cytotoxicity of the supramolecular hybrid hydrogels to that of the native hydrogels without CNT. Consequently, such CNT‐hybridized supramolecular hydrogel shows a great potential in the biomedical application. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Medicated wound dressings based on poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone)/chitosan hydrogels

Poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone) (PVP)/chitosan hydrogels were prepared by a low‐temperature treatment and subsequent ⁶⁰Co γ‐ray irradiation and then were medicated with ciprofloxacin lactate (an antibiotic) and chitosan oligomer (molecular weight = 3000 g/mol). The gel content, swelling ratio, tensile strength, and crystallinity of the hydrogels were determined. The effects of the chitosan molecular weight, the low‐temperature treatment procedure, and the radiation dosage on the hydrogel properties were examined. The molecular weight of chitosan was lowered by the irradiation, but its basic polysaccharide structure was not destroyed. Repeating the low‐temperature treatment and γ‐ray irradiation caused effective physical crosslinking and chemical crosslinking, respectively, and contributed to the mechanical strength of the final hydrogels. The incorporation of PVP and chitosan resulted in a significant improvement in the equilibrium swelling ratio and elongation ratio of the prepared hydrogels. The ciprofloxacin lactate and chitosan oligomer were soaked into the hydrogels. Their in vitro release behaviors were examined, and they were found to follow diffusion‐controlled kinetics. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2453–2463, 2006     

Photopolymerized hydrogel composites from poly(ethylene glycol) and hydroxyapatite for controlled protein delivery in vitro

The incorporation of hard particles into soft hydrogels can improve the mechanical properties and provide necessary bioactivity to the hydrogels for desired biomedical applications. Hydrogel composites containing hydroxyapatite (HA) are promising materials for orthopedic applications. In this study, injectable poly(ethylene glycol) (PEG) hydrogel precursor solutions containing HA particles and model protein bovine serum albumin (BSA) were synthesized in situ by photopolymerization. In vitro BSA release properties from the hydrogel composites containing various amounts of HA were investigated and discussed. Fourier transform infrared spectroscopy and scanning electron microscopy were employed to investigate the interaction between HA and the hydrogel network and the morphology of the hydrogel composites. It is found that PEG hydrogel composites containing HA sustained the release of BSA for at least 5 days and the presence of HA slowed down BSA release. Photopolymerized hydrogel composites containing HA may find potential use as a drug delivery matrix for orthopedic tissue engineering. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of poly(acrylic acid)–chitosan hydrogels by gamma irradiation and in vitro drug release

Biocompatible and biodegradable pH‐responsive hydrogels based on poly(acrylic acid) (AAc) and chitosan were prepared for controlled drug delivery. These interpolymeric hydrogels were synthesized by a gamma irradiation polymerization technique. The degree of gelation was over 96% and increased as the chitosan or acrylic acid content increased. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of pH 1–12 was investigated. The AAc/chitosan hydrogels showed the highest water content when the 30 vol % AAc and 0.1 wt % chitosan were irradiated with a 30‐kGy radiation dose. Also, an increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 12. The drug, 5‐fluorouracil, was loaded into these hydrogels and the release studies were carried out in simulated gastric and intestinal fluids. The in vitro release profiles of the drugs showed that more than 90% of the loaded drugs were released in the first 1 h at the intestinal pH and the rest of the drug had been released slowly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3660–3667, 2003     

Preparation and properties of core–shell alginate–carboxymethylchitosan hydrogels

BACKGROUND: Hydrogels of alginate (ALG) with partially carboxymethylated chitosan (CMCHI) have been produced for drug delivery, based on the interactions between the negative groups and an ionic crosslinker. In the present work, CMCHI was used to evaluate the influence of amino groups that are positively charged at pH = 4 and 6 on the ALG–CMCHI core–shell hydrogel preparation. An ANOVA statistics tool was used to evaluate the effect of composition, pH and chitosan chemical nature on the morphology and swelling properties of the hydrogels in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). RESULTS: The ALG–CMCHI core–shell hydrogels presented smaller (ca 2.3 µm) and more homogeneous microparticles than those with unmodified chitosan (ca 5.5 µm). The ALG–CMCHI hydrogels showed higher thermal stability and lower degree of swelling in SGF (314%) compared to those with chitosan (708%), since in the former hydrogels the protective layers that surround the particles are negatively charged. CONCLUSION: CMCHI can replace chitosan in the production of core–shell hydrogels with improved properties since the negative charge surrounding the ALG–CMCHI particles favours a lower degree of swelling. The results point out a possible prevention of burst release in SGF, sustaining the swelling ability of the ALG–CMCHI core–shell hydrogels in SIF, promising appropriate drug release. Copyright © 2009 Society of Chemical Industry     

γ‐Irradiation preparation of poly(acrylic acid)–chitosan hydrogels for in vitro drug release

Biocompatible and biodegradable pH‐responsive hydrogels based on poly(acrylic acid) and chitosan were prepared for controlled drug delivery. These interpolymeric hydrogels were synthesized by a γ‐irradiation polymerization technique. The degree of gelation was over 96% and increased as the chitosan or acrylic acid (AAc) content increased. The equilibrium swelling studies of hydrogels prepared under various conditions were carried out in an aqueous solution, and the pH sensitivity in a range of pH 1–12 was investigated. The AAc/chitosan hydrogels showed the highest water content when 30 vol % AAc and 0.1 wt % chitosan were irradiated with a 30 kGy dose of radiation. In addition, an increase of the degree of swelling with an increase in the pH was noticed and it had the highest value at pH 12. The drug 5‐fluorouracil was loaded into these hydrogels and the release studies were carried out in simulated gastric and intestinal fluids. The in vitro release profiles of the drugs showed that more than 90% of the loaded drugs were released in the first 1 h at intestinal pH and the rest of the drug was released slowly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3270–3277, 2003     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Chitosan–Quercetin Bioconjugate as Multi‐Functional Component of Antioxidants and Dual‐Responsive Hydrogel Networks

Multifunctional hydrogels based on chitosan–quercetin (CHITQ) conjugate are prepared by a thermo‐induced radical procedure in the presence of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and N,N′‐methylenebis(acrylamide) (MEBA). At first, quercetin (Q) is grafted onto chitosan backbone with a functionalization degree of 275 mg of Q per gram of conjugate, as calculated by ¹H‐NMR analyses to impart antioxidant properties to the polysaccharide. Then, a pH and temperature sensitive hydrogel was obtained by involving CHITQ and NIPAAm in the polymerization reaction. The accessibility of phenolic moieties is modified in response to the hydrogel swelling/deswelling, as confirmed by antioxidant tests performed at different temperatures. Dual stimuli‐responsive hydrogels are proposed for the delivery of caffeine as model drug. The release profiles of caffeine depict a system particularly performing as on/off device at acidic pH with excellent applicability prospects.     

Antibacterial activity and cytotoxicity of hydrogel–nanosilver composites based on copolymers from 2‐acrylamido‐2‐methylpropanesulfonate sodium

In this research, we contributed to the search for potential hydrogel–silver dressings by generating hydrogel–silver nanoparticles (AgNPs) composites prepared by the dipping of the crosslinked hydrogel poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) (1:1) and poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) (1:1) into an aqueous suspension of citrate‐stabilized AgNPs. The composites obtained were evaluated by an antibacterial activity assay on Staphylococcus aureus and Escherichia coli and subjected to an in vitro cytotoxicity assay for human fibroblasts. The composite formed from the hydrogel poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium) with 3 mol % N,N‐methylene bisacrylamide showed the highest antibacterial activity and the least cytotoxicity among the composites tested; this makes it an excellent alternative as a potential dressing for the treatment of deep and exudative wounds. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39644.     

Preparation and properties of PVA/PVP hydrogels containing chitosan by radiation

Radiation can induce chemical reactions to modify polymers even when they are in the solid state or at a low temperature. Radiation crosslinking can be easily adjusted by controlling the radiation dose and is reproducible. The finished product contains no residuals of substances required to initiate the chemical crosslinking, which can restrict its application possibilities. In these studies, hydrogels for wound dressing were made from a mixture of chitosan and polyvinyl alcohol (PVA)/poly‐N‐vinylpyrrolidone (PVP) by freezing and thawing, gamma‐ray irradiation, or combined freezing and thawing and gamma‐ray irradiation. The physical properties of the hydrogel, such as gelation, water absorptivity, and gel strength, were examined to evaluate the usefulness of the hydrogels for wound dressing. The PVA/PVP composition was 60:40, PVA/PVP–chitosan ratio was in the range 9:1–7:3, and the concentration of, PVA/PVP–chitosan as a solid was 15 wt %. A mixture of PVA/PVP–chitosan was exposed to gamma irradiation doses of 25, 35, 50, 60 and 70 kGy to evaluate the effect of irradiation dose on the physical properties of hydrogels. Water‐soluble chitosan was used in these experiment. The physical properties of the hydrogels, such as gelation and gel strength, were higher when the combination of freezing and thawing and irradiation were used rather than just freezing and thawing. The PVA/PVP–chitosan composition and irradiation dose had a greater influence on swelling than gel content. Swelling percent increased as the composition of chitosan in PVA/PVP–chitosan increased. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1787–1794, 2002     

Poly(vinyl alcohol)/chitosan/honey/clay responsive nanocomposite hydrogel wound dressing

Many efforts have been made to develop modern wound dressings to overcome limitations of traditional ones. Smart nanocomposite hydrogels are appropriate candidates. In this work, a novel responsive nanocomposite hydrogel based on poly(vinyl alcohol)/chitosan/honey/clay was developed and evaluated as a novel wound dressing. The morphology and properties of synthesized nanocomposite hydrogels loaded with honey as a drug model were investigated. The exfoliated morphology of nanocomposite was confirmed by X‐ray diffractometry. Swelling studies were performed at 20 and 37 °C at various pH. The results showed that swelling increased as a result of temperature rise and maximum swelling occurred at a pH of 2. In vitro release of honey was also studied at the same conditions. Corresponding results indicated faster honey release rate at higher pH values. MTT results exhibited no cytotoxicity in nanocomposite hydrogel system. Investigation of antibacterial activity revealed more than 99% antibacterial activity for proposed system. In vivo results confirmed the wound healing ability of developed system. Generally, appropriate properties of proposed system made it ideal in wound dressing applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46311.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002     

Thermosensitive poly(n‐isopropylacrylamide) hydrogels bonded on cellulose supports

A two‐step initiation and polymerization process was developed for the preparation of two series of hydrogel–cellulose composites with distinctively different morphologies and swelling behaviors. Hydroentangled cotton cellulose fibers were optimally initiated in 20 mM aqueous ammonium cerium(IV) nitrate for 15 min and then polymerized in aqueous solutions of N‐isopropylacrylamide (NIPAAm) monomer and N,N′‐methylene bisacrylamide (BisA) crosslinker. The extents of hydrogels on the cellulose solids could be controlled by variations in the concentrations of the monomer and crosslinker as well as the NIPAAm/BisA solution‐to‐solid ratios. The two series of hydrogel–cellulose composites formed were hydrogel‐covered/filled cellulose (I) and cellulose‐reinforced hydrogel (II) composites. Series I composites were synthesized with NIPAAm/BisA solutions below the liquid saturation level of the cellulose; this led to pore structures (size and porosity) that depended on both the extent and swelling of the grafted hydrogels. Series II composites were polymerized in the presence of excessive NIPAAm/BisA solutions to produce cellulose solids completely encapsulated in the hydrogels. All the cellulose‐supported hydrogels exhibited lower extents of phase transition over a wider temperature range (28–40°C) than the free poly(N‐isopropylacrylamide) hydrogels (32°C). These findings demonstrate that hydrogels can be used to control the pore structure of cellulose and can be supported with cellulose fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 999–1006, 2003     

Effects of chitosan characteristics on the physicochemical properties,antibacterial activity,and cytotoxicity of chitosan/2‐glycerophosphate/nanosilver hydrogels

The effects of molecular weight (MW) and the degree of deacetylation (DD) of chitosan (CS) on the physicochemical properties, antibacterial activity, and cytotoxicity of CS/2‐glycerophosphate (GP)/nanosilver hydrogel in the development of a thermosensitive in situ formed wound dressing are examined herein. The gelation temperatures for the hydrogels were measured in the range of 32–37°C by manipulating the MW and DD of CS and the GP concentration. The structure of 88% DD CS hydrogel was more porous, uniform, and connective than that of the 80% DD CS hydrogel. The superior water vapor transmission rates of hydrogels with 80% and 88% DD CS were 7150 ± 52 and 9044 ± 221 gm^?2 d^?1, respectively. The skin permeations of nanosilver by the 80% and 88% DD CS hydrogels were 3.82 and 4.99 μg cm^?2, respectively, in 24 h tests. Both the hydrogels with 6 and 12 ppm nanosilver showed cytotoxicity for HS68 cells. The diameters of the hydrogel's inhibition zones for Pseudomonas aeruginosa and Staphylococcus aureus increased when the concentration of nanosilver increased and the MW of the CS decreased. Therefore, the hydrogel could be prepared with lower MW CS and lower concentration of nanosilver in order to reduce the cytotoxicity of nanosilver, while maintaining similar antibacterial activity for a hydrogel prepared with higher concentration nanosilver and higher MW CS. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Star‐shaped polycaprolactone/chitosan composite hydrogels: fabrication and characterization

Star‐shaped polycaprolactone (stPCL)/chitosan composite hydrogel was fabricated by simply melt/solution blending between chitosan/dicarboxylic acid solution and melted stPCL, using 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and N‐hydroxysuccinimide as conjugating agents to obtain a composite hydrogel. Here, stPCL and modified stPCL were investigated. The stPCL was modified to have a carboxyl‐terminated chain (stPCL‐COOH). The composite hydrogels were transparent. The network structure of the composite hydrogels was investigated. stPCL‐OH had no chemical bond to the chitosan network but stPCL‐COOH could co‐crosslink with the chitosan network. The porous structure and porosity of the composite hydrogels were similar to those of chitosan hydrogel. However, the hydrophobicity of stPCL resulted in a lower swelling ratio compared to chitosan hydrogel. The rheological analysis of the composite hydrogel exhibited a stable crosslinked network. Compression testing of the composite hydrogel obtained from stPCL‐COOH at a mole ratio of stPCL‐COOH and chitosan of 1:1 had optimum compressive mechanical properties comparable to chitosan hydrogel due to a synergistic effect of the flexibility in stPCL and the co‐crosslinking of stPCL‐COOH with the chitosan network. © 2020 Society of Chemical Industry     

Preparation and properties of crosslinked chitosan thermosensitive hydrogel for injectable drug delivery systems

The aim of this study was to prepare and investigate the physical properties of a thermosensitive crosslinked chitosan pregel solution, and evaluate the in vitro release profiles of macromolecules from this sol–gel transition system. Chitosan and poly (vinyl alcohol) were used to form an interpenetrating polymeric network with glutaraldehyde as the crosslinker, and glycerophosphate (GP) was added to transform the pH‐dependent solutions into thermosensitive pH‐dependent solutions. Rheological study showed that the gelation was dependent on the crosslink degree and GP concentration of the solution. The crosslinked gel had excellent mechanic properties and no apparent “pores” and formed an integrated hydrogel texture according to scanning electronic micrograph. Gas chromatography test guaranteed the medication safety with no detection of glutaraldehyde remnants in the hydrogels. In vitro release study showed that the gelation does not significantly affect the macromolecules diffusion but the crosslinking degree does. These results indicated that the hydrogel formed an intensified three‐dimensional hybrid network with interpenetrating molecules, which effectively buffered or delayed the macromolecules diffusion. The hydrogels sustained the drug release over 30 days and could be potentially used as in situ gelling implants. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1892–1898, 2006     

Dual stimuli responsive glycidyl methacrylate chitosan‐quaternary ammonium hybrid hydrogel and its bovine serum albumin release

A new family of cationic hybrid hydrogels from two new positively charged aqueous soluble precursors, glycidyl methacrylate‐chitosan (GMA‐chitosan), and 2‐(acryloyloxy) ethyl trimethylammonium (AETA), was developed via a simple photocrosslinking fabrication method. These hybrid hydrogels have pendant quaternary ammonium functional groups on the AETA segments. The chemical composition of GMA‐chitosan/AETA hybrid hydrogels were characterized by Fourier transform infrared spectroscopy and their mechanical, swelling, and morphological properties were examined as a function of the composition of the hybrids as well as the effect of pH and ionic strength of the surrounding medium. GMA‐chitosan/AETA hybrid hydrogels show a porous network structure with average pore diameter 20–50 μm. The compression moduli of these hybrid hydrogels ranged from 27.24 to 28.94 kPa, which are significantly higher than a pure GMA‐chitosan (17.64 kPa). GMA‐chitosan/AETA hybrid hydrogel shows pH/ionic strength responsive swelling behavior because of the presence of the positive charge pendant groups. These hybrid hydrogels showed a sustained BSA protein release and a significantly lower initial burst release than a pure GMA‐chitosan hydrogel. The two aqueous soluble precursors and the cationic charge characteristics of the resulting GMA‐chitosan/AETA hybrid hydrogels may suggest that this new family of biomaterials may have promising applications as the pH responsive protein drug delivery vehicles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3736–3745, 2013