Preparation of polysilsesquioxane having dimethylamino group and grafted thermoresponsive polymer

The polysilsesquioxane having mercapto, dimethylamino, and phenyl groups (PAMPSQ) was prepared from the corresponding trimethoxysilanes by co-condensation under basic conditions. The mercapto group on PAMPSQ was utilized as an initiator for graft copolymerization of N-isopropylacrylamide and N,N-dimethylacrylamide. The grafting of the copolymer proceeded effectively to give the thermoresponsive polysilsesquioxane derivative (GrPSQ) without the formation of gel product. The obtained GrPSQ was amphiphilic and provided the property of thermoresponsive reversible aggregation. The aggregation temperatures of GrPSQ varied in buffer solutions showing different pH values. Furthermore, the formation of ammonium salts utilizing dimethylaminio groups with carboxylic acids or halogen compounds led to a rise in aggregation temperature.     

Effect of polymerization conditions on the syndiotactic-specificity in radical polymerization of N-isopropylacrylamide and fractionation of the obtained polymer according to the stereoregularity

Radical polymerization of N-isopropylacrylamide (NIPAAm) was examined in the presence of hexamethylphosphoramide (HMPA). The addition of an excess amount of HMPA induced syndiotactic-specificity that gradually enhanced as the feed monomer was consumed. The syndiotacticity of the obtained poly(NIPAAm)s was improved by increasing the [HMPA]₀/[NIPAAm]₀ ratio to five and prolonging the polymerization time to 96 h (racemo=72%). It was also revealed that more stereoregulated poly(NIPAAm) could be fractionated by reprecipitating the resulting polymers from hexane-THF mixture. This result suggested that more stereoregulated poly(NIPAAm) showed a lower solubility than less stereoregulated poly(NIPAAm)s. Furthermore, unusual hysteresis was observed in transmittance analysis of an aqueous solution of the fractionated syndiotactic poly(NIPAAm).     

Thermal/pH-sensitive core-shell copolymer latex and its potential for targeting drug carrier application

In this work, the synthesis, properties of a thermal/pH-sensitive core-shell copolymer latex were studied and its potential application as a targeting drug carrier was also investigated, where the crosslinked copolymer of N-isopropylacrylamide (NIPAAm) and chitosan was synthesized by soapless dispersion polymerization as the core, and the copolymer of methacrylic acid (MAA) and methyl methacrylate (MMA) was prepared as the shell. The weight ratio of chitosan/NIPAAm and the concentration of crosslinking agent in feed had been changed to investigate their effects on the particle size, reaction rate, zeta potential, surface functional groups, and specific surface area of latex particles. The swelling and thermo-sensitive behavior of the film made from these core-shell latexes were also studied under different pH values of buffer solution. The model drug (caffeine) could be loaded inside the copolymer particles and protected from releasing through the transport process effectively. And the thermo-responsive property of these copolymer particles significantly enhanced the protein conjugation that showed the potential of the latex being applied on the targeting drug carrier.     

Heterotactic poly(N-isopropylacrylamide) prepared via radical polymerization in the presence of fluorinated alcohols

Radical polymerization of N-isopropylacrylamide in toluene at −40 °C in the presence of fourfold amounts of fluorinated alcohols was investigated. The ¹³C NMR analysis of the obtained polymers suggested that the addition of fluorinated alcohols induced heterotactic specificity in radical polymerization of NIPAAm, although syndiotactic poly(NIPAAm)s were obtained by adding alkyl alcohols as we have previously reported. To the best of our knowledge, this is the first synthesis of heterotactic poly(NIPAAm).     

Metal-free isotactic-specific radical polymerization of N-isopropylacrylamide with pyridine N-oxide derivatives: The effect of methyl substituents of pyridine N-oxide on the isotactic specificity and the proposed mechanism for the isotactic-specific radical polymerization

The radical polymerizations of N-isopropylacrylamide (NIPAAm) in chloroform at low temperatures in the presence of pyridine N-oxide (PNO) derivatives were investigated. It was found that the methylation at meta-positions of PNO improved the isotactic specificity induced by PNO, whereas the methylation at ortho-positions prevented the induction of the isotactic specificity. NMR analysis revealed that NIPAAm and PNO derivatives formed predominantly 2:1 complex through a hydrogen-bonding interaction. Furthermore, the induction of the isotactic specificity was attributed to the conformationally limited propagating radicals. Based on these findings, the mechanism of the isotactic-specific radical polymerization was discussed.     

Hydrogen-bond-assisted isotactic-specific radical polymerization of N-isopropylacrylamide with pyridine N-oxide

Radical polymerization of N-isopropylacrylamide (NIPAAm) in CHCl₃ at low temperatures in the presence of pyridine N-oxide (PNO) was investigated. An isotactic poly(NIPAAm) with meso diad content of 61% was successfully prepared at −60 °C in the presence of a two-fold amount of PNO. Thermodynamic analysis suggested that the isotactic-specificity was entropically induced, probably due to conformational fixation near the propagating chain-end through coordination by PNO.     

Effect of a combination of hexamethylphosphoramide and alkyl alcohol on the stereospecificity of radical polymerization of N-isopropylacrylamide

Radical polymerization of N-isopropylacrylamide (NIPAAm) was investigated at low temperatures in the presence of both hexamethylphosphoramide (HMPA) and alkyl alcohols. Although HMPA and alkyl alcohols separately induced syndiotactic specificity in NIPAAm polymerization in toluene at low temperatures, a combination of HMPA and less bulky alkyl alcohols, such as methanol and ethanol, was found to induce isotactic specificity at −80 °C. NMR analysis of mixtures of NIPAAm, ethanol and HMPA suggested the formation of a 1:1:1 complex through O-H•••O=C and N-H•••O=P hydrogen bonding. It is believed that the steric effect of HMPA enhanced by cooperative hydrogen bonding was responsible for the combined effect of HMPA and alkyl alcohols in inducing isotactic specificity.     

Direct synthesis of syndiotactic-rich poly(N-isopropylacrylamide) via radical polymerization of hydrogen-bond-complexed monomer

Radical polymerization of N-isopropylacrylamide (NIPAAm) in toluene was investigated in the presence of hexamethylphosphoramide (HMPA). We succeeded in directly preparing syndiotactic-rich poly(NIPAAm), the syndiotacticity of which (r=70%) is the highest among those of radically-prepared poly(NIPAAm)s so far reported, by lowering polymerization temperature to −60 °C in the presence of a two-fold amount of HMPA. The NMR analysis revealed that the induced syndiotactic-specificity was ascribed to 1:1 complex formation between NIPAAm and HMPA. Furthermore, thermodynamic analysis described that the induced syndiotactic-specificity was enthalpically achieved.     

Synthesis of core-shell polyurethane-polydimethylsiloxane particles in cyclohexane and in supercritical carbon dioxide used as dispersant media: a comparative investigation

Polyurethane-polydimethylsiloxane particles of tuneable diameter in the range 0.5-5 μm, have been synthesized by step-growth polymerization, both in cyclohexane and in supercritical carbon dioxide (scCO₂) used as dispersant media. The feasibility of the polyaddition between ethylene glycol and tolylene-2,4-diisocyanate, selected as monomers, was first demonstrated in cyclohexane, in the presence of hydroxy- or isocyanate-terminated polydimethylsiloxane used as a surfmer. The polymerizations were then carried out in scCO₂ at 60 °C and above 200 bar, after the solubility of each reactant has been determined in scCO₂, at various pressures and temperatures. Both in cyclohexane and in scCO₂, the reaction extent was determined by means of FTIR spectroscopy. The structure and the morphology of the resulting powdery polyurethane-polydimethylsiloxane ‘core-shell’ material were confirmed by NMR, SEC, TEM and SEM techniques.     

Synthesis of PCL/clay masterbatches in supercritical carbon dioxide

Pre-exfoliated nanoclays were prepared through a masterbatch process using supercritical carbon dioxide as solvent and poly(?-caprolactone) as organic matrix. In situ polymerization of ?-caprolactone in the presence of large amount of clay was conducted to obtain these easily dispersible nanoclays, collected as a dry and fine powder after reaction. Dispersion of these pre-exfoliated nanoclays in chlorinated polyethylene was also investigated. All the results confirm the specific advantages of supercritical CO₂ towards conventional solvents for filler modification.     

Synthesis and characterization of pH- and temperature-sensitive hydrogel of N-isopropylacrylamide/cyclodextrin based copolymer

A reactive β-Cyclodextrin (β-CD) based monomer carrying vinyl carboxylic acid functional groups was synthesized via reaction of β-CD with maleic anhydride (MAH) in N,N-dimethylformamide (DMF) at 80 °C. By copolymerization of the monomer with N-isopropylacrylamide (NIPA), a novel hydrogel, poly(NIPA-co-MAH-β-CD) with pH and temperature sensitivities plus molecular inclusion function, was obtained using free radical polymerization in aqueous solution. The hydrogel's composition was determined by element analysis and infrared spectroscopy. Equilibrium swelling ratio (ESR) of hydrogels was tested under different environment of pH, temperature and ionic strength. The results indicated that ESR of hydrogels presents marked variations following the change of experimental conditions used.     

Temperature dependence of density of polymer gels: Effects of ionizable groups in copoly(N-isopropylacrylamide/acrylic acid or sodium acrylate)-water systems

Effects of ionizable groups in hydrogels of copolymer networks on the volumetric contraction-expansion process were investigated. Polymer networks used were: copoly[N-isopropylacrylamide (NIPA)(1 − x)/acrylic acid (HAc) or sodium acrylate (NaAc)(x)] with mole fraction of minor component (x) assuming 0.0114 and 0.0457. From the temperature (T) dependence of total volume of gels, densities of the polymer and solvent (water) components, and stoichiometry, we evaluated (1) the volume of gels occupied by a single mean polymeric residue and associated water molecules (expressed in units of nm³), mean v_sp(gel), and (2) number of water molecules per single mean polymeric residue, mean N_s(gel), from near 273 K to 323 K. These quantities (1) and (2) listed above showed how acid and salt forms affect differently on volumetric changes of gels over 50 K. We developed an approach to evaluate volumetric changes of gels solely caused by a single polymeric residue of a minor component (x < 0.05) plus associated water by applying thermodynamic first-order perturbation theory. They are specific v_sp(gel)(T) for a single HAc or NaAc polymeric residue plus associated water and the corresponding specific N_s(gel)(T). Specific v_sp(gel)(HAc or NaAc)(T) and the corresponding specific N_s(gel(T)) revealed specific characteristics in thermal behavior near their respective transition temperatures from the swollen to shrunken states. We found these thermal changes shown at the nano-scale match very well with specific changes in the molality(T) of both ionizable groups. In fact, these are directly triggered by varying contents of water in gels. Based on the understanding of dissociative equilibrium attained by ionizable groups, we successfully replaced Na⁺ in hydrogels of copoly[NIPA(1 − x)/NaAc(x)] (x = 0.0457) by hydrogen ions. Absence of Na⁺ in treated hydrogels was experimentally verified by ²³Na NMR and Na atomic absorption flame photometry. Discontinuity in the volumetric contraction-expansion process from the swollen to shrunken states and vice versa was not observed in contradiction to the previous reports [Hirotsu S, Hirokawa Y, Tanaka T. J Chem Phys 1987;87:1392-5. Matsuo SE, Tanaka T. J Chem Phys 1988;89:1695-703.] obtained by the conventional swelling experiments.     

pH-Controlled association of PEG-containing terpolymers of N-isopropylacrylamide and 1-vinylimidazole

Temperature- and pH-controlled association of terpolymers of N-isopropylacrylamide (NIPA) with 1-vinylimidazole (VI) and polyethylene glycol (PEG) has been investigated by light scattering and atomic force microscopy (AFM) in situ. The polymers contained 0-15 mol% VI and 0-2 mol% PEG. The phase transition temperatures (T_p) have been in the range of 32-45 °C and exhibited significant dependence on the pH of solution in the pH range between 5 and 8. The T_p of the polymers increased with increasing VI content and with decreasing pH, confirming major effect of VI ionization status on T_p. The presence of PEG grafts in the polymer structure had augmenting effect on the magnitude of pH-responsiveness and on the pH-independent colloidal stability of the polymer particles formed above T_p. Incorporation of VI into the polymer structure had similar, but pH-dependent effect on colloidal stabilization of the polymer particles. The size of the particles formed after the phase transition is driven by the association of the collapsed NIPA segments in the globule conformation and it decreased with decreasing pH. The phase transition temperature of the polymers could be adjusted to increase from temperatures below, to temperatures above body temperature upon decreasing pH from 7 to 6, suggesting that such polymers could provide a material platform for a variety of biomedical applications. AFM analysis in situ showed a fully reversible formation of particles in the solutions of the polymers above their T_p.     

Benzylated modification and dyeing of ramie fiber in supercritical carbon dioxide

The effects of pretreatment conditions, including the addition of a phase‐transfer catalyst, on the benzylation of ramie fiber were investigated in this study. Raw and benzylated ramie fibers were dyed in supercritical carbon dioxide, and the color strength (K/S) of the ramie fiber was measured by ultraviolet–visible spectroscopy. An obviously improved dyeing capability of the benzylated ramie fiber, that is, a better level‐dyeing property and a higher K/S, was achieved. Moreover, the color strength of the ramie fiber, indexed as the value of K/S, increased significantly with the degree of substitution of the benzylated ramie fiber. The raw and modified ramie fibers were characterized with Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of biodiesel from edible and non-edible oils in supercritical alcohols and enzymatic synthesis in supercritical carbon dioxide

Biodiesel is an attractive alternative fuel because it is environmentally friendly and can be synthesized from edible and non-edible oils. The synthesis of biodiesel from edible oils like palm oil and groundnut oil and from crude non-edible oils like Pongamia pinnata and Jatropha curcas was investigated in supercritical methanol and ethanol without using any catalyst from 200 to 400 °C at 200 bar. The variables affecting the conversion during transesterification, such as molar ratio of alcohol to oil, temperature and time were investigated in supercritical methanol and ethanol. Biodiesel was also synthesized enzymatically with Novozym-435 lipase in presence of supercritical carbon dioxide. The effect of reaction variables such as temperature, molar ratio, enzyme loading and kinetics of the reaction was investigated for enzymatic synthesis in supercritical carbon dioxide. Very high conversions (>80%) were obtained within 10 min and nearly complete conversions were obtained at within 40 min for the synthesis of biodiesel in supercritical alcohols. However, conversions of only 60–70% were obtained in the enzymatic synthesis even after 8 h.     

Synthesis and photoluminescent properties of polymer containing perylene and fluorene units

A new luminescent polymer, F-PTCD, with N,N′-bis-(propenylaniline)-3,4,9,10-perylene tetracarboxylic diimide-emitting segments (PTCD) and 9,9-diphenylfluorene (DIPT) was synthesized by Heck reaction. The structures were characterized by MS, EA, ¹H NMR, IR and the photoluminescent (PL) properties were investigated by UV/vis absorption and fluorescence emission spectra. The fluorescence quantum yield was 0.453 in acetone. Thermogravimetric analysis and differential scanning calorimetry showed that the polymer is thermal stable up to 569 °C with glass-transition temperature higher than 125 °C. They are yellow-red emitting materials with the band gap of 2.33 eV estimated from the onset absorption. In addition, the emission can be quenched by both electron donor (N,N-dimethylaniline) and electron acceptor (Fullerene), where the processes followed the Stern-Volmer equation. Furthermore, the interaction between F-PTCD and carbon nanotubes (CNTs) was also studied by fluorescent quenching.     

Synthesis of poly(N-isopropylacrylamide) copolymer containing anhydride and imide comonomers - A theoretical study on reversal of LCST

The stimuli sensitive copolymer NIPAM-co-MI was prepared by copolymerizing NIPAM (N-isopropylacrylamide) with varying concentrations of maleimide (MI). The copolymer showed the same ratio of the monomeric components as that of the initial monomer feed ratio, with the two components arranged in the chain in a purely random sequence. Interestingly, the lower critical solution temperature (LCST) of NIPAM-co-MI was found to decrease with increase in MI loading in the copolymer. This behavior was in drastic contrast to the LCST behavior of a similar copolymer NIPAM-co-MA of NIPAM and maleic anhydride (MA) where the LCST showed an increase with increase in the MA concentration. A theoretical interpretation of the contrasting LCST behavior of both NIPAM-co-MI and NIPAM-co-MA was obtained by quantum mechanical (QM) modeling on small structural units of the polymers as well as molecular dynamic (MD) simulations at LCST and above the LCST on 50-unit oligomer model of the polymers. The QM models showed that the MI based polymer is more inclined towards bend structure, higher hydration, and higher intramolecular hydrogen bond formation between its monomer units when compared to those of the MA based polymer. The results of the large scale MD simulation was in complete support of the QM results as it showed the formation of a more folded and highly hydrated NIPAM-co-MI than NIPAM-co-MA.     

Solubility of Jatropha and Aquilaria oils in supercritical carbon dioxide at elevated pressures

This study investigated experimental equilibrium solubilities of Jatropha curcas and Aquiliaria crassna oils dissolved in supercritical carbon dioxide at temperatures of 318-338 K and pressures of 20, 25, 30, 35 MPa. The highest solubility of J. curcas and A. crassna oil were 29.8 and 28.4 mg L⁻¹, respectively, at 338 K and 35 MPa. The oil solubilities and the concentration of triglycerides both increased with increasing temperature and pressure. Triglyceride molecules surrounded by carbon dioxide molecules may be proposed since solubilities increased with the flux of supercritical carbon dioxide. The solubility of these two oils linearly increased with the density of supercritical carbon dioxide. Experimental data of the oil solubility were successfully correlated by the Chrastil equation.     

Synthesis of thermosensitive poly(N-alkylacrylamide) gels and core-shell type gels

When the poly(acrylic acid) (PAA) gel-1,8-diazabicyclo-[5,4,0]-7-undecene salt (DAA) was placed in N-methyl-2-pyrrolidone containing an excess of alkylamine and triphenylphosphine, selective amidation took place from the outside to give the corresponding poly(N-alkylacrylamide) gel containing a C3 alkyl chain through a DAA-poly(N-alkylacrylamide) type gel capsule consisting of a hydrophilic unreacted core part and an amidated shell layer. The amidation proceeded by a reaction mechanism similar to the unreacted-core model. Thermal properties of the resulting poly(N-alkylacrylamide) gels such as deswelling behavior and equilibrium swelling ratio in water as a function of temperature were measured. The release of methyl orange from a poly(N-alkylacrylamide) gel and the gel capsule was also examined. PAA-poly(N-alkylacrylamide) type gel capsules containing a PAA core part and thermosensitive poly(N-alkylacrylamide) shell layer, prepared by the neutralization of DAA-poly(N-alkylacrylamide) type gel capsules, showed on-off chemical release characteristics in response to stepwise temperature changes across the LCST.     

Preparation of polysilsesquioxane grafted thermoresponsive polymer by use of mercapto group

The polysilsesquioxane having mercapto and phenyl groups (PMPSQ) was prepared from the corresponding trimethoxysilanes by co-condensation under basic conditions. The mercapto groups on PMPSQ were utilized as the initiators for the graft polymerization of N-isopropylacrylamide (NIPAM) with the comonomer such as N,N-dimethylacrylamide (DMAA) or hydroxyethyl acrylate under UV irradiation. The grafting of the copolymers proceeded effectively to give the functionalized polysilsesquioxane derivatives, in which the monomer unit ratios almost reflected the feed molar ratios of the monomers and no formation of gel product was observed. These grafted polysilsesquioxanes could be dissolved in water and showed the property of thermoresponsive gel formation.