Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

A vacuum vessel (VV) of a tokamak fusion reactor like the International Thermonuclear Experimental Reactor (ITER) consists the first confinement barrier that includes the largest amount of radioactive materials such as tritium and activation products. The ingress of coolant event (ICE) is a design basis event in the ITER where water is used as the coolant. The loss of vacuum event (LOVA) is also considered as an independent design basis event. Based on the results of ICE and LOVA preliminary experiments, an integrated in-vessel thermofluid test is being planned and conceptual design of the facility is in progress. The main objectives of the integrated test are to investigate the consequences of possible interaction of the ICE and the LOVA and to validate the analytical model of thermofluid events in the VV of the fusion reactor. This paper introduces a conceptual design of the integrated test facility and a testing plan.     

Source Term and Mobilization Assessment in NSSR-1 of ITER

We describe the radioactive sources in the International Thermonuclear Experimental Reactor (ITER). The most important sources are co-deposited tritium, tritiated water, tokamak dust, and corrosion products. The co-deposited tritium is limited to 1 kg-T; the total on-site tritium inventory in the Basic Performance Phase (BPP) is 4 kg-T. Tritiated water concentrations are kept below 0.2 g-T/m³ in the divertor; other coolant loops have lower tritium concentrations. The in-vessel dust inventory is up to 100 kg-W, 100 kg-Be, and 200 kg-C. The activated corrosion product inventory is kept below 10 kg per loop.     

Analysis of the reference accidental sequence for safety assessment of LLCB TBM system

Safety analysis of the reference accidental sequence has been carried out for Lead Lithium cooled Ceramic Breeder (LLCB) Test Blanket Module (TBM) system; India's prototype of DEMO blanket concept for testing in International Thermonuclear Experimental Reactor (ITER). The accidental event analyzed starts with a Postulated Initiating Event (PIE) of ex-vessel loss of first wall helium coolant due to guillotine rupture of coolant pipe with simultaneous assumed failure of plasma shutdown system. Three different variants of the sequences analyzed include simultaneous additional failures of TBM and ITER first wall, failure of TBM box resulting in to spilling of lead lithium liquid metal in to vacuum vessel and reactor trip on Loss of Coolant Accident (LOCA) signal from TBM system. The analysis address specific reactor safety concerns, such as pressurization of confinement buildings, vacuum vessel pressurization, release of activated products and tritium during these accidental events and hydrogen production from chemical reactions between lead–lithium liquid metal and beryllium with water. An in-house customized computer code is developed and through these deterministic safety analyses the prescribed safety limits are shown to be well within limits for Indian LLCB-TBM design and it also meets overall safety goal for ITER. This paper reports transient analysis results of the safety assessment.     

Materials selection and design for the International Thermonuclear Experimental Reactor(ITER)

The International Thermonuclear Experimental Reactor (ITER) program is a multinational effort to design and develop the technology for a superconducting magnetic fusion energy reactor that can achieve long burn times using a deuterium-tritium fuel. During the recently completed Conceptual Design Activity (CDA), teams from the U.S., Japan, Soviet Union, and EC generated a baseline design useful for physics and component modeling and also serving as a focus for component and materials R&D. Here I will review the ITER CDA magnet design, choice of magnet structural materials, and the effect of materials and design limitations on ITER operation. In addition, the selection and availability of superconducting materials will be briefly discussed.     

Development of ITER tritium transport package

For tritium supply to the fusion reactor of ITER (International Thermonuclear Experimental Reactor; the way to new energy) [1], tritium needs to be transported from tritium production sites, mainly the CANDU type reactor sites to the Tritium Plant building of ITER. Korea Atomic Energy Research Institute (KAERI) was commissioned the work of developing the transport package for tritium by ITER organization and the first stage of the development has been finished. The developed package was designed to carry 70 g of tritium and classified as a type B(U) package, which should comply with the requirements stipulated in IAEA regulations for the transportation of radioactive materials [2]. The package is composed of a storage vessel, a containment vessel, an overpack and an aluminum liner, which is a unique feature of the package. The aluminum liner between the storage vessel and the containment vessel is for containment control under the repetitive use of the package. The package has enough pressure resistance for 5 years in-site storage and the structural and thermal integrity under the hypothetical accident conditions has been demonstrated through a series of analyses.     

Safety Analysis Results for ITER In-Vessel Loss of Coolant Events

A number of postulated in-vessel loss of coolant accidents (LOCAs) associated with the first wall and baffle cooling systems of the ITER detailed design have been analyzed for the ITER Non-site Specific Safety Report (NSSR-1). A range of break sizes from one first wall tube break (1.57 × 10^–4 m²) to damage to all in-vessel components (0.6 m² break) have been examined. These events span the ITER event classification from likely events to extremely unlikely events. In addition, in-vessel pipe breaks in combination with bypass of the two confinement barriers through a generic penetration have been examined. In all cases, when the vacuum vessel pressure suppression system is activated, most of the radioactive inventory is carried to the suppression pool where it remains for the duration of the event. Releases in these events are well within ITER release limits.     

Tritium environmental transport studies at TFTR

Environmental tritium concentrations will be measured near the Tokamak Fusion Test Reactor (TFTR) to help validate dynamic models of tritium transport in the environment. For model validation the database must contain sequential measurements of tritium concentrations in key environmental compartments. Since complete containment of tritium is an operational goal, the supplementary monitoring program should be able to glean useful data from an unscheduled acute release. Portable air samplers will be used to take samples automatically every 4 hours for a week after an acute release, thus obtaining the time resolution needed for code validation. Samples of soil, vegetation, and foodstuffs will be gathered daily at the same locations as the active air monitors. The database may help validate the plant/soil/air part of tritium transport models and enhance environmental tritium transport understanding for the International Thermonuclear Experimental Reactor (ITER).     

Recent progress on the Tokamak Fusion Test Reactor

The deuterium-tritium (D-T) experiments on the Tokamak Fusion Test Reactor (TFTR) have yielded unique information on the confinement, heating and alpha particle physics of reactor scale D-T plasmas as well as the first experience with tritium handling and D-T neutron activation in an experimental environment. The D-T plasmas produced and studied in TFTR have peak fusion power of 10.7 MW with central fusion power densities of 2.8 MWm^–3 which is similar to the 1.7 MWm^–3 fusion power densities projected for 1,500 MW operation of the International Thermonuclear Experimental Reactor (ITER). Detailed alpha particle measurements have confirmed alpha confinement and heating of the D-T plasma by alpha particles as expected. Reversed shear, highl _i and internal barrier advanced tokamak operating modes have been produced in TFTR which have the potential to double the fusion power to 20 MW which would also allow the study of alpha particle effects under conditions very similar to those projected for ITER. TFTR is also investigating two new innovations, alpha channeling and controlled transport barriers, which have the potential to significantly improve the standard advanced tokamak.     

Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

China Fusion Engineering Test Reactor(CFETR) is an ITER-like fusion engineering test reactor that is intended to fill the scientific and technical gaps between ITER and DEMO.One of the main missions of CFETR is to achieve a tritium breeding ratio that is no less than 1.2to ensure tritium self-sufficiency.A concept design for a water cooled ceramics breeding blanket(WCCB) is presented based on a scheme with the breeder and the multiplier located in separate panels for CFETR.Based on this concept,a one-dimensional(1D) radial built breeding blanket was first designed,and then several three-dimensional models were developed with various neutron source definitions and breeding blanket module arrangements based on the 1D radial build.A set of nuclear analyses have been carried out to compare the differences in neutronics characteristics given by different calculation models,addressing neutron wall loading(NWL),tritium breeding ratio(TBR),fast neutron flux on inboard side and nuclear heating deposition on main in-vessel components.The impact of differences in modeling on the nuclear performance has been analyzed and summarized regarding the WCCB concept design.     

R&D activities of the liquid breeder blanket in Korea

A liquid breeder blanket has been developed in parallel with the International Thermonuclear Experimental Reactor (ITER) Test Blanket Module (TBM) program in Korea. The Korea Atomic Energy Research Institute (KAERI) has developed the common fields of a solid TBM such as design tools, structural material, fabrication methods, and He cooling technology to support this concept for the ITER. Also, other fields such as a liquid breeder technology and tritium extraction have been developed from the designed liquid TBM. For design tools, system codes for safety analysis such as Multi-dimensional Analysis of Reactor Safety (MARS) and GAs Multi-component Mixture Analysis (GAMMA) were developed for He coolant and liquid breeder. For the fabrication methods, Ferritic Martensitic Steel (FMS) to FMS and Be to FMS joinings with a Hot Isostatic Pressing (HIP) were developed and verified with a high heat flux test of up to 0.5–1.0 MW/m². Moreover, three mockups were successfully fabricated and a 10-channel prototype is being fabricated to make a rectangular channel FW. For the integrity of the joining, two high heat flux test facilities were constructed, and one using an electron beam has been constructed. With the 6 MPa nitrogen loop, a basic heat transfer experiment for code validation was performed. From the verification of the components such as preheater and circulator, a 9 MPa He loop was constructed, and it supplies high temperature (500 °C) and pressure (8 MPa) He to the high heat flux test facility. For an electromagnetic (EM) pump development for circulating the liquid breeder, magnetohydrodynamic (MHD) experiment, and flow corrosion test, a PbLi breeder loop was constructed. From the performance test, the EM pump and magnet show their capability, and flow and static corrosion tests including oxide coating for corrosion protection were performed. For tritium extraction from the liquid breeder, a gas–liquid contact method was adopted and a tritium extraction chamber was constructed. For measurement of the tritium amount in the liquid breeder, permeation sensors have been developed.     

CFETR第一壁及赤道面外包层中子辐照损伤初步分析

中国聚变工程实验堆(Chinese Fusion Engineering Testing Reactor,CFETR)的包层和偏滤器第一壁面向堆芯等离子体,第一壁辐照损伤分析对于托克马克安全运行至关重要。赤道面外包层较其它包层距离堆芯等离子体中心更近,其结构材料承受中子辐照大。因此,进行中子辐照损伤评估十分必要。基于此目的,采用计算机辅助设计(Computer Aided Design,CAD)模型和蒙特卡罗中子学建模转换接口Mc CAD完成中子学建模,并用蒙特卡罗方法的粒子输运程序计算第一壁和氦冷固态外包层结构材料辐照损伤。此外,对比了铍和钨作为面向等离子体材料两种情况下第一壁的受损情况。计算结果表明,氦冷固态包层模型下结构材料可以满足CFETR一期的运行要求。     

托卡马克聚变中子源的数值模型研究

托卡马克(Tokamak)聚变装置中子学分析中,聚变中子源描述是重要的输入参数,其准确性直接影响分析结果的可靠性。通过分析ITER和欧洲聚变示范堆(EU DEMO)中子学分析中所采用的聚变中子源模型,提出了一种完整描述Tokamak中L-mode、H-mode等离子体的D-D、D-T聚变中子源的数值模型。在中国聚变工程实验堆(CFETR)的工程集成设计平台上,编写了基于蒙特卡罗算法的程序SCG求解该数值模型,实现了读取(零维)等离子体参数、输出可供典型中子学软件MCNP直接读取的中子源定义文件的功能。以CFETR氦冷球床包层的中子学分析模型为基准,在相同的L-mode等离子体D-T聚变工况下,相较于采用EU DEMO源子程序,采用本模型计算得到的中子壁负载差异最大值为2.02%,包层氚增殖率差异为0.18%,全堆能量增益因子的差异为0.23%。结果表明,本模型与其他源描述的差异较小,可应用于CFETR的中子学分析。     

国际热核聚变实验堆过渡馈线设计与分析

国际热核聚变实验堆（InternationalThermonuclearExperimentalReactor，简称ITER）采用超导馈线系统传输磁体线圈所需电流、冷却液及数据信号等。本文介绍了馈线系统中过渡馈线的设计，并通过有限元法对设计结构进行全面校核和应力分析，为结构的进一步研制提供了理论依据。     

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR

Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor to bridge the gap between ITER and future fusion power plant. As its objectives are to demonstrate generation of fusion power and to realize tritium self-sufficiency, the tritium breeding ratio (TBR) is a key design parameter. In the blanket design and optimization, the structures such as the first wall (FW), cooling plate (CP), stiffening plate (SP), cap and some other design parameters in detailed 3-D model have significant impacts on the tritium breeding performance. Based on a helium cooled solid breeder blanket option for CFETR, the impact analysis of the helium cooled solid blanket structures on tritium breeding performance was performed in this paper. Firstly, the detailed 3D neutronics model was built by using of a CAD to Monte Carlo Geometry conversion tool McCad. Then based on the detailed 3D neutronics model, the impact analyses of the blanket structures on tritium breeding performance were carried out, which include the FW, CP, SP, cap and side wall. By the sensitivity study of the blanket structures on the TBR, it gave the TBR variation trend and references for the blanket design and optimization.     

Design and technical status of the EU contribution to ITER

Europe is involved in the procurement of most of the high-technology items for the ITER device (e.g. parts of the superconducting Toroidal (TF) and Poloidal Field (PF) coils, the vacuum vessel (VV), the in-vessel components, the remote handling, the additional heating systems, the tritium plant and cryoplant and finally parts of the diagnostics). In many cases the technologies required to manufacture these components are well established, in others there is still ongoing design and R&D work to select and optimise the final design solutions and to consolidate the underlying technologies as, for example, in the areas of heating and current drive, plasma diagnostics, shield blanket and first wall, remote handling, etc. A design review has recently been conducted by the ITER Organisation, with the support of the Domestic Agencies (DAs) established by the countries participating to ITER, to address the remaining outstanding technical issues and understand the associated implications for design, machine performance, schedule and cost.This paper provides an update of the design and technical status of EU contributions to ITER.     

中国HCCB-TBM氚增殖单元三维多物理场耦合氚输运模拟分析

中国氦冷固态实验包层模块（HCCB-TBM）将在国际热核聚变实验堆（ITER）上安装测试,以验证其氚增殖能力与核热移出能力。HCCB-TBM中的氚输运与流体的传热和传质、氢同位素交换、结构材料的SORET效应密切相关。考虑以上物理因素,基于商业软件COMSOL完成了HCCB-TBM氚增殖单元多物理场耦合的氢同位素输运模拟分析。分析结果表明：球床吹洗气体中含氢有助于抑制氚渗透损失;当吹洗气体含氢浓度为4.66×10^-2 mol/m³时,产生约13.2倍的氚渗透阻止效应。     

Economic Impacts on the United States of Siting Decisions for the International Thermonuclear Experimental Reactor

This paper presents the results of a study that examines and compares the probable short-term economic impacts of the International Thermonuclear Experimental Reactor (ITER) on the United States (U.S.) if (1) ITER were to be sited in the U.S., or (2) ITER were to be sited in one of the other countries that, along with the U.S., is currently participating in the ITER program. Life-cycle costs associated with ITER construction, operation, and decommissioning are analyzed to assess their economic impact. A number of possible U.S. host and U.S. non-host technology and cost-sharing arrangements with the other ITER Parties are examined, although cost-sharing arrangements and the process by which the Parties will select a host country and an ITER site remain open issues. Both national and local/regional economic impacts, as measured by gross domestic product, regional output, employment, net exports, and income, are considered. These impacts represent a portion of the complex, interrelated set of economic considerations that characterize U.S. host and U.S. non-host participation in ITER. A number of other potentially important economic and noneconomic considerations are discussed qualitatively.     

Using the tritium plasma experiment to evaluate ITER PFC safety

The Tritium Plasma Experiment was assembled at Sandia National Laboratories, Livermore and is being moved to the Tritium Systems Test Assembly facility at Los Alamos National Laboratory to investigate interactions between dense plasmas at low energies and plasma-facing component materials. This apparatus has the unique capabilty of replicating plasma conditions in a tokamak divertor with particle flux densities of 2 × 10²³ ions/m².s and a plasma temperature of about 15 eV using a plasma that includes tritium. An experimental program has been initiated using the Tritium Plasma Experiment to examine safety issues related to tritium in plasma-facing components, particularly the ITER divertor. Those issues include tritium retention and release characteristics, tritium permeation rates and transient times to coolant streams, surface modification and erosion by the plasma, the effects of thermal loads and cycling, and particulate production. An industrial consortium led by McDonnell Douglas will design and fabricate the test fixtures.Prepared for the U.S. Department of Energy, Office of Energy Research under DOE Idaho Field Office Contract DE-AC07-76ID01570.     

Fabrication and high heat flux test of the first wall mock-ups for the Korean He Cooled Test Blanket (KO HCML TBM)

Korea has proposed and designed a Helium Cooled Molten Lithium (HCML) Test Blanket Module (TBM) to be tested in the International Thermonuclear Experimental Reactor (ITER). Ferrite Martensitic (FM) steel is designed to be used as a structural material in this design. Three mock-ups, especially for the first wall channels, were fabricated with a Hot Isostatic Pressing (HIP, 1050 °C, 100 MPa, 2 h) in order to develop the fabrication technology. One of them was used to observe the microstructure and it was found that there are no pores and cracks. Other mock-ups were used with high heat flux (HHF) tests performed with 20 cycles under 0.5 and 1.0 MW/m² heat fluxes in order to evaluate the integrity of the fabricated mock-ups. Here, HHF test conditions were determined with an ANSYS-CFX analysis. And then, the mock-ups were tested and broken under a 1.5 MW/m² heat flux, which is about the Critical Heat Flux (CHF) at the wall.