Bifunctional Porous NiFe/NiCo2O4/Ni Foam Electrodes with Triple Hierarchy and Double Synergies for Efficient Whole Cell Water Splitting

A 3D hierarchical porous catalyst architecture based on earth abundant metals Ni, Fe, and Co has been fabricated through a facile hydrothermal and electrodeposition method for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The electrode is comprised of three levels of porous structures including the bottom supermacroporous Ni foam (≈500 μm) substrate, the intermediate layer of vertically aligned macroporous NiCo₂O₄ nanoflakes (≈500 nm), and the topmost NiFe(oxy)hydroxide mesoporous nanosheets (≈5 nm). This hierarchical architecture is binder‐free and beneficial for exposing catalytic active sites, enhancing mass transport and accelerating dissipation of gases generated during water electrolysis. Serving as an anode catalyst, the designed hierarchical electrode displays excellent OER catalytic activity with an overpotential of 340 mV to achieve a high current density of 1200 mA cm^?2. Serving as a cathode catalyst, the catalyst exhibits excellent performance toward HER with a moderate overpotential of 105 mV to deliver a current density of 10 mA cm^?2. Serving as both anode and cathode catalysts in a two‐electrode water electrolysis system, the designed electrode only requires a potential of 1.67 V to deliver a current density of 10 mA cm^?2 and exhibits excellent durability in prolonged bulk alkaline water electrolysis.     

3D Self‐Supported Fe‐Doped Ni2P Nanosheet Arrays as Bifunctional Catalysts for Overall Water Splitting

The development of highly efficient bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial for improving the efficiency of overall water splitting, but still remains challenging issue. Herein, 3D self‐supported Fe‐doped Ni₂P nanosheet arrays are synthesized on Ni foam by hydrothermal method followed by in situ phosphorization, which serve as bifunctional electrocatalysts for overall water splitting. The as‐synthesized (Ni_0.33Fe_0.67)₂P with moderate Fe doping shows an outstanding OER performance, which only requires an overpotential of ≈230 mV to reach 50 mA cm^?2 and is more efficient than the other Fe incorporated Ni₂P electrodes. In addition, the (Ni_0.33Fe_0.67)₂P exhibits excellent activity toward HER with a small overpotential of ≈214 mV to reach 50 mA cm^?2. Furthermore, an alkaline electrolyzer is measured using (Ni_0.33Fe_0.67)₂P electrodes as cathode and anode, respectively, which requires cell voltage of 1.49 V to reach 10 mA cm^?2 as well as shows excellent stability with good nanoarray construction. Such good performance is attributed to the high intrinsic activity and superaerophobic surface property.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

Physically Adsorbed Metal Ions in Porous Supports as Electrocatalysts for Oxygen Evolution Reaction

Developing highly efficient and earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is significantly important for water‐splitting. Here, for the first time it is reported that the physically adsorbed metal ions (PAMI) in porous materials can be served as highly efficient OER electrocatalysts, which provides a universal PAMI method to develop electrocatalysts. This PAMI method can be applied to almost all porous supports, including graphene, carbon nanotubes, C₃N₄, CaCO₃, and porous organic polymers and all the systems exhibit excellent OER performance. In particular, the as‐synthesized Co_0.7Fe_0.3CB exhibits a small overpotential of 295 mV and 350 mV at the current density of 10 mA cm^?2 and 100 mA cm^?2, respectively, which exceeds commercial 40 wt% IrO₂/CB and most reported non‐noble metal‐based OER catalysts. Moreover, the mass activity of Co_0.7Fe_0.3CB reaches 643.4 A g^?1 at the overpotential of 320 mV, which is nearly 4.7 times higher than that of 40 wt% IrO₂/CB. In addition, the advanced ex situ and in situ synchrotron X‐ray characterizations are carried out to unravel the PAMI synthetic process. In short, this PAMI method will break the conversional understanding, i.e., the most OER catalysts are synthesized chemically, because the new PAMI method does not require any chemical synthesis, which therefore opens a new avenue for the development of OER electrocatalysts.     

Engineering an Earth‐Abundant Element‐Based Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The simultaneous and efficient evolution of hydrogen and oxygen with earth‐abundant, highly active, and robust bifunctional electrocatalysts is a significant concern in water splitting. Herein, non‐noble metal‐based Ni–Co–S bifunctional catalysts with tunable stoichiometry and morphology are realized. The engineering of electronic structure and subsequent morphological design synergistically contributes to significantly elevated electrocatalytic performance. Stable overpotentials (η₁₀) of 243 mV (vs reversible hydrogen electrode) for oxygen evolution reaction (OER) and 80 mV for hydrogen evolution reaction (HER), as well as Tafel slopes of 54.9 mV dec^?1 for OER and 58.5 mV dec^?1 for HER, are demonstrated. In addition, density functional theory calculations are performed to determine the optimal electronic structure via the electron density differences to verify the enhanced OER activity is related to the Co top site on the (110) surface. Moreover, the tandem bifunctional NiCo₂S₄ exhibit a required voltage of 1.58 V (J = 10 mA cm^?2) for simultaneous OER and HER, and no obvious performance decay is observed after 72 h. When integrated with a GaAs solar cell, the resulting photoassisted water splitting electrolyzer shows a certified solar‐to‐hydrogen efficiency of up to 18.01%, further demonstrating the feasibility of engineering protocols and the promising potential of bifunctional NiCo₂S₄ for large‐scale overall water splitting.     

Autogenous Growth of Hierarchical NiFe(OH)x/FeS Nanosheet‐On‐Microsheet Arrays for Synergistically Enhanced High‐Output Water Oxidation

Practical electrochemical water splitting requires cost‐effective electrodes capable of steadily working at high output, leading to the challenges for efficient and stable electrodes for the oxygen evolution reaction (OER). Herein, by simply using conductive FeS microsheet arrays vertically pre‐grown on iron foam (FeS/IF) as both substrate and source to in situ form vertically aligned NiFe(OH)_x nanosheets arrays, a hierarchical electrode with a nano/micro sheet‐on‐sheet structure (NiFe(OH)_x/FeS/IF) can be readily achieved to meet the requirements. Such hierarchical electrode architecture with a superhydrophilic surface also allows for prompt gas release even at high output. As a result, NiFe(OH)_x/FeS/IF exhibits superior OER activity with an overpotential of 245 mV at 50 mA cm^?2 and can steadily output 1000 mA cm^?2 at a low overpotential of 332 mV. The water‐alkali electrolyzer using NiFe(OH)_x/FeS/IF as the anode can deliver 10 mA cm^?2 at 1.50 V and steadily operate at 300 mA cm^?2 with a small cell voltage for 70 h. Furthermore, a solar‐driven electrolyzer using the developed electrode demonstrates an exceptionally high solar‐to‐hydrogen efficiency of 18.6%. Such performance together with low‐cost Fe‐based materials and facile mass production suggest the present strategy may open up opportunities for rationally designing hierarchical electrocatalysts for practical water splitting or diverse applications.     

Promoting Active Sites in Core–Shell Nanowire Array as Mott–Schottky Electrocatalysts for Efficient and Stable Overall Water Splitting

Developing earth‐abundant, active, and robust electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a vital challenge for efficient conversion of sustainable energy sources. Herein, metal–semiconductor hybrids are reported with metallic nanoalloys on various defective oxide nanowire arrays (Cu/CuO_x, Co/CoO_x, and CuCo/CuCoO_x) as typical Mott–Schottky electrocatalysts. To build the highway of continuous electron transport between metals and semiconductors, nitrogen‐doped carbon (NC) has been implanted on metal–semiconductor nanowire array as core–shell conductive architecture. As expected, NC/CuCo/CuCoO_x nanowires arrays, as integrated Mott–Schottky electrocatalysts, present an overpotential of 112 mV at 10 mA cm^?2 and a low Tafel slope of 55 mV dec^?1 for HER, simultaneously delivering an overpotential of 190 mV at 10 mA cm^?2 for OER. Most importantly, NC/CuCo/CuCoO_x architectures, as both the anode and the cathode for overall water splitting, exhibit a current density of 10 mA cm^?2 at a cell voltage of 1.53 V with excellent stability due to high conductivity, large active surface area, abundant active sites, and the continuous electron transport from prominent synergetic effect among metal, semiconductor, and nitrogen‐doped carbon. This work represents an avenue to design and develop efficient and stable Mott–Schottky bifunctional electrocatalysts for promising energy conversion.     

In Situ/Operando Capturing Unusual Ir6+ Facilitating Ultrafast Electrocatalytic Water Oxidation

Identifying real active sites and understanding the mechanism of oxygen evolution reaction (OER) are still a big challenge today for developing efficient electrochemical catalysts in renewable energy technologies. Here, using a combined in situ/operando experiments and theory, the catalytic mechanism of the ordered OER active Co and Ir ions in Sr₂CoIrO_6−δ is studied, which exhibits an unprecedented low overpotential 210 mV to achieve 10 mA cm^–2, ranking the highest performance among perovskite-based solid-state catalysts. Operando X-ray absorption spectroscopies as a function of applied voltage indicates that Ir⁴⁺ ion is gradually converted into extremely high-valence Ir^5+/6+, while the part of Co³⁺ ion is transferred into Co⁴⁺ under OER process. Density functional theory calculations explicitly reveal the order Co-O-Ir network as an origin of ultrahigh OER activity. The work opens a promising path to overcome the sluggish kinetics of OER bottleneck for water splitting via proper arrangements of the multi-active sites in catalyst.     

Electro‐Oxidation of Ni42 Steel: A Highly Active Bifunctional Electrocatalyst

Janus type water‐splitting catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni42 steel is upon harsh anodization converted into a bifunctional electrocatalyst. Oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) and at pH 0, 1, 13, 14, 14.6 (HER), respectively. The current density taken from long‐term OER measurements in pH 7 buffer solution upon the electro‐activated steel at 491 mV overpotential (η) is around four times higher (4 mA cm^?2) in comparison with recently developed OER electrocatalysts. The very strong voltage–current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 are even superior to those known for IrO₂‐RuO₂. No degradation of the catalyst is detected even when conditions close to standard industrial operations are applied to the catalyst. A stable Ni‐, Fe‐oxide based passivating layer sufficiently protects the bare metal for further oxidation. Quantitative charge to oxygen (OER) and charge to hydrogen (HER) conversion are confirmed. High‐resolution XPS spectra show that most likely γ?NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.     

Hierarchical NiCo2S4 Nanowire Arrays Supported on Ni Foam: An Efficient and Durable Bifunctional Electrocatalyst for Oxygen and Hydrogen Evolution Reactions

A recent approach for solar‐to‐hydrogen generation has been water electrolysis using efficient, stable, and inexpensive bifunctional electrocatalysts within strong electrolytes. Herein, the direct growth of 1D NiCo₂S₄ nanowire (NW) arrays on a 3D Ni foam (NF) is described. This NiCo₂S₄ NW/NF array functions as an efficient bifunctional electrocatalyst for overall water splitting with excellent activity and stability. The 3D‐Ni foam facilitates the directional growth, exposing more active sites of the catalyst for electrochemical reactions at the electrode–electrolyte interface. The binder‐free, self‐made NiCo₂S₄ NW/NF electrode delivers a hydrogen production current density of 10 mA cm^–2 at an overpotential of 260 mV for the oxygen evolution reaction and at 210 mV (versus a reversible hydrogen electrode) for the hydrogen evolution reaction in 1 m KOH. This highly active and stable bifunctional electrocatalyst enables the preparation of an alkaline water electrolyzer that could deliver 10 mA cm^–2 under a cell voltage of 1.63 V. Because the nonprecious‐metal NiCo₂S₄ NW/NF foam‐based electrodes afford the vigorous and continuous evolution of both H₂ and O₂ at 1.68 V, generated using a solar panel, they appear to be promising water splitting devices for large‐scale solar‐to‐hydrogen generation.     

Unraveling the Synergistic Mechanism of Bi-Functional Nickel–Iron Phosphides Catalysts for Overall Water Splitting

Ni–Fe bimetallic electrocatalysts are expected to replace existing precious metal catalysts for water splitting and achieve industrial applications due to their high intrinsic activity and low cost. However, the mechanism by which Ni and Fe species synergistically enhance catalytic activity remains obscure, which still needs further in-depth study. In this study, a highly active bi-functional electrocatalyst of Ni₂P/FeP heterostructures is constructed on Fe foam (Ni₂P/FeP-FF), clearly illustrating the effect of Ni on Fe species for oxygen evolution reaction (OER) and revealing the true catalytic active phase for hydrogen evolution reaction (HER). The Ni₂P/FeP-FF only needs overpotentials of 217 and 42 mV to reach 10 mA cm⁻² for OER and HER, respectively, exhibiting superior bi-functional activity for overall water splitting. The Ni can elevate the strength of Fe O on Ni₂P/FeP-FF surface and promote the formation of high-valence FeOOH phase during OER, thus enhancing OER performance. Based on first-principles calculations and Raman characterizations, the Ni₂P/Ni(OH)₂ heterojunction evolved from Ni₂P/FeP is identified as the real high active phase for HER. This study not only builds a near-commercial bifunctional electrocatalyst for overall water splitting, but also provides a deep insight for synergistic catalytic mechanism of Ni and Fe species.     

Efficient and Durable 3D Self‐Supported Nitrogen‐Doped Carbon‐Coupled Nickel/Cobalt Phosphide Electrodes: Stoichiometric Ratio Regulated Phase‐ and Morphology‐Dependent Overall Water Splitting Performance

The construction of a novel 3D self‐supported integrated Ni_xCo_2?xP@NC (0 < x < 2) nanowall array (NA) on Ni foam (NF) electrode constituting highly dispersed Ni_xCo_2?xP nanoparticles, nanorods, nanocapsules, and nanodendrites embedded in N‐doped carbon (NC) NA grown on NF is reported. Benefiting from the collective effects of special morphological and structural design and electronic structure engineering, the Ni_xCo_2?xP@NC NA/NF electrodes exhibit superior electrocatalytic performance for water splitting with an excellent stability in a wide pH range. The optimal NiCoP@NC NA/NF electrode exhibits the best hydrogen evolution reaction (HER) activity in acidic solution so far, attaining a current density of 10 mA cm^?2 at an overpotential of 34 mV. Moreover, the electrode manifests remarkable performances toward both HER and oxygen evolution reaction in alkaline medium with only small overpotentials of 37 mV at 10 mA cm^?2 and 305 mV at 50 mA cm^?2, respectively. Most importantly, when coupling with the NiCoP@NC NA/NF electrode for overall water splitting, an alkali electrolyzer delivers a current density of 20 mA cm^?2 at a very low cell voltage of ≈1.56 V. In addition, the NiCoP@NC NA/NF electrode has outstanding long‐term durability at j = 10 mA cm^?2 with a negligible degradation in current density over 22 h in both acidic and alkaline media.     

Boosting Activity on Co4N Porous Nanosheet by Coupling CeO2 for Efficient Electrochemical Overall Water Splitting at High Current Densities

Developing highly active nonprecious electrocatalysts with superior durability for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial to improve the efficiency of overall water splitting but remains challenging. Here, a novel superhydrophilic Co₄N‐CeO₂ hybrid nanosheet array is synthesized on a graphite plate (Co₄N‐CeO₂/GP) by an anion intercalation enhanced electrodeposition method, followed by high‐temperature nitridation. Doping CeO₂ into Co₄N can favor dissociation of H₂O and adsorption of hydrogen, reduce the energy barrier of intermediate reactions of OER, and improve the compositional stability, thereby dramatically boosting the HER performance while simultaneously inducing enhanced OER activity. Furthermore, the superhydrophilic self‐supported electrode with Co₄N‐CeO₂ in situ grown on the conductive substrate expedites electron conduction between substrate and catalyst, promotes the bubble release from electrode timely and impedes catalyst shedding, ensuring a high efficiency and stable working state. Consequently, the Co₄N‐CeO₂/GP electrode shows exceptionally low overpotentials of 24 and 239 mV at 10 mA cm^?2 for HER and OER, respectively. An alkaline electrolyzer by using Co₄N‐CeO₂/GP as both the cathode and anode requires a cell voltage of 1.507 V to drive 10 mA cm^?2, outperforming the Pt/C||RuO₂ electrolyzer (1.540 V@10 mA cm^?2). More significantly, the electrolyzer has extraordinary long‐term durability at a large current density of 500 mA cm^?2 for 50 h, revealing its potential in large‐scale applications.     

Efficient and Stable Bifunctional Electrocatalysts Ni/NixMy (M = P,S) for Overall Water Splitting

Development of easy‐to‐make, highly active, and stable bifunctional electrocatalysts for water splitting is important for future renewable energy systems. Three‐dimension (3D) porous Ni/Ni₈P₃ and Ni/Ni₉S₈ electrodes are prepared by sequential treatment of commercial Ni‐foam with acid activation, followed by phosphorization or sulfurization. The resultant materials can act as self‐supported bifunctional electrocatalytic electrodes for direct water splitting with excellent activity toward oxygen evolution reaction and hydrogen evolution reaction in alkaline media. Stable performance can be maintained for at least 24 h, illustrating their versatile and practical nature for clean energy generation. Furthermore, an advanced water electrolyzer through exploiting Ni/Ni₈P₃ as both anode and cathode is fabricated, which requires a cell voltage of 1.61 V to deliver a 10 mA cm^?2 water splitting current density in 1.0 m KOH solution. This performance is significantly better than that of the noble metal benchmark—integrated Ni/IrO₂ and Ni/Pt–C electrodes. Therefore, these bifunctional electrodes have significant potential for realistic large‐scale production of hydrogen as a replacement clean fuel to polluting and limited fossil‐fuels.     

Amorphous Cobalt–Iron Hydroxide Nanosheet Electrocatalyst for Efficient Electrochemical and Photo‐Electrochemical Oxygen Evolution

Finding efficient electrocatalysts for oxygen evolution reaction (OER) that can be effectively integrated with semiconductors is significantly challenging for solar‐driven photo‐electrochemical (PEC) water splitting. Herein, amorphous cobalt–iron hydroxide (CoFe? H) nanosheets are synthesized by facile electrodeposition as an efficient catalyst for both electrochemical and PEC water oxidation. As a result of the high electrochemically active surface area and the amorphous nature, the optimized amorphous CoFe? H nanosheets exhibit superior OER catalytic activity in alkaline environment with a small overpotential (280 mV) to achieve significant oxygen evolution (j = 10 mA cm^?2) and a low Tafel slope (28 mV dec^?1). Furthermore, CoFe? H nanosheets are simply integrated with BiVO₄ semiconductor to construct CoFe? H/BiVO₄ photoanodes that exhibit a significantly enhanced photocurrent density of 2.48 mA cm^?2 (at 1.23 V vs reversible hydrogen electrode (RHE)) and a much lower onset potential of 0.23 V (vs RHE) for PEC‐OER. Careful electrochemical and optical studies reveal that the improved OER kinetics and high‐quality interface at the CoFe? H/BiVO₄ junction, as well as the excellent optical transparency of CoFe? H nanosheets, contribute to the high PEC performance. This study establishes amorphous CoFe? H nanosheets as a highly competitive candidate for electrochemical and PEC water oxidation and provides general guidelines for designing efficient PEC systems.     

Porous Pd/NiFeOx Nanosheets Enhance the pH-Universal Overall Water Splitting

Modulating the morphology and chemical composition is an efficient strategy to enhance the catalytic activity for water splitting, since it is still a great challenge to develop a bifunctional catalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) over a wide pH range. Herein, Pd/NiFeO_x nanosheets are synthesized with tightly arranged petal nanosheets and uniform mesoporous structure on nickel foam (NF). The porous 2D structure yields a larger surface area and exposes more active sites, facilitating water splitting at all pH values. The overpotential of Pd/NiFeO_x nanosheets for OER is only 180, 169, and 310 mV in 1 m KOH, 0.5 m H₂SO₄, and 1 m phosphate-buffered saline (PBS) conditions at 10 mA cm⁻² current density, as well as excellent HER activity with ultralow overpotential in a wide pH range. When using porous Pd/NiFeO_x nanosheets as bifunctional catalysts for water splitting, it just required a cell voltage of 1.57 V to reach a current density of 20 mA cm⁻² with nearly 100% faradic efficiency in alkaline conditions, which is much lower than that of benchmark Pt/CǁRuO₂ (1.76 V) couples, along with the improving stability benefiting from the good corrosion resistance of the inner NiFeO_x nanosheets.     

Overall Water Splitting Catalyzed Efficiently by an Ultrathin Nanosheet‐Built,Hollow Ni3S2‐Based Electrocatalyst

Making highly efficient catalysts for an overall ?water splitting reaction is vitally important to bring solar/electrical‐to‐hydrogen energy conversion processes into reality. Herein, the synthesis of ultrathin nanosheet‐based, hollow MoO_x/Ni₃S₂ composite microsphere catalysts on nickel foam, using ammonium molybdate as a precursor and the triblock copolymer pluronic P123 as a structure‐directing agent is reported. It is also shown that the resulting materials can serve as bifunctional, non‐noble metal electrocatalysts with high activity and stability for the hydrogen evolution reaction (HER) as well as the oxygen evolution reaction (OER). Thanks to their unique structural features, the materials give an impressive water‐splitting current density of 10 mA cm^?2 at ≈1.45 V with remarkable durability for >100 h when used as catalysts both at the cathode and the anode sides of an alkaline electrolyzer. This performance for an overall water splitting reaction is better than even those obtained with an electrolyzer consisting of noble metal‐based Pt/C and IrO_x/C catalytic couple—the benchmark catalysts for HER and OER, respectively.     

Two Birds with One Stone: Metal–Organic Framework Derived Micro‐/Nanostructured Ni2P/Ni Hybrids Embedded in Porous Carbon for Electrocatalysis and Energy Storage

The construction of bifunctional electrode materials for hydrogen evolution reaction (HER) and lithium‐ion batteries (LIBs) has been a hot topic of research. Herein, metal–organic frameworks (MOFs) derived micro‐/nanostructured Ni₂P/Ni hybrids with a porous carbon coating (denoted as Ni₂P/Ni@C) are prepared using a feasible pyrolysis–phosphidation strategy. On the one hand, the optimal Ni₂P/Ni@C catalyst exhibits superior HER performance with a low overpotential of 149 mV versus a reversible hydrogen electrode (RHE) at 10 mA cm^?2 and excellent durability. The density functional theory computations verify that the strong synergistic effect between Ni₂P and Ni could optimize the electronic structure, thus rendering the enhanced electrocatalytic performance. On the other hand, the Ni₂P/Ni@C electrode displays a reversible capacity of 597 mAh g^?1 after 1000 cycles at 1000 mA g^?1 and improved rate capability as an anode for LIBs, owing to the well‐organized micro‐/nanostructure and conductive Ni core. In addition, the electrochemical reaction mechanism of the Ni₂P/Ni@C electrode upon lithiation/delithiation is investigated in detail via ex situ X‐ray powder diffraction and X‐ray photoelectron spectroscopy methods. It is expected that the facile and controllable approach can be extended to fabricate other MOF‐based metal phosphides/metal hybrids for electrochemical energy storage and conversion systems.     

Realizing the Synergy of Interface Engineering and Chemical Substitution for Ni3N Enables its Bifunctionality Toward Hydrazine Oxidation Assisted Energy-Saving Hydrogen Production

Hydrazine oxidation assisted water electrolysis offers a unique rationale for energy-saving hydrogen production, yet the lack of effective non-noble-metal bifunctional catalysts is still a grand challenge at the current stage. Here, the Mo doped Ni₃N and Ni heterostructure porous nanosheets grow on Ni foam (denoted as Mo Ni₃N/Ni/NF) are successfully constructed, featuring simultaneous interface engineering and chemical substitution, which endow the outstanding bifunctional electrocatalytic performances toward both hydrazine oxidation reaction (HzOR) and hydrogen evolution reaction (HER), demanding a working potential of −0.3 mV to reach 10 mA cm⁻² for HzOR and −45 mV for that of HER. Impressively, the overall hydrazine splitting (OHzS) system requires an ultralow cell voltage of 55 mV to deliver 10 mA cm⁻² with remarkable long-term durability. Moreover, as a proof-of-concept, economical H₂ production systems utilizing OHzS unit powered by a waste AAA battery, a commercial solar cell, and a homemade direct hydrazine fuel cell (DHzFC) are investigated to inspire future practical applications. The density functional theory calculations demonstrate that the synergy of Mo substitution and abundant Ni₃N/Ni interface owns a more thermoneutral value for H* absorption ability toward HER and optimized dehydrogenation process for HzOR.     

Defect‐Rich Ni3FeN Nanocrystals Anchored on N‐Doped Graphene for Enhanced Electrocatalytic Oxygen Evolution

Owing to their unique optical, electronic, and catalytic properties, metal nitrides nanostructures are widely used in optoelectronics, clean energy, and catalysis fields. Despite great progress has been achieved, synthesis of defect‐rich (DR) bimetallic nitride nanocrystals or related nanohybrids remains a challenge, and their electrocatalytic application for oxygen evolution reaction (OER) has not been fully studied. Herein, the DR‐Ni₃FeN nanocrystals and N‐doped graphene (N‐G) nanohybrids (DR‐Ni₃FeN/N‐G) are fabricated through temperature‐programmed annealing and nitridation treatment of NiFe‐layered double hydroxides/graphene oxide precursors by controlling annealing atmosphere. In the nanohybrids, the DR‐Ni₃FeN nanocrystals are anchored on N‐G, and mainly show twin crystal defects besides ≈10% of stacking faults. Such nanohybrids can efficiently catalyze OER in alkaline media with a small overpotential (0.25 V) to attain the current density of 10 mA cm^?2 and a high turnover frequency (0.46 s^?1), superior to their counterparts (the nearly defect‐free Ni₃FeN/N‐G), commercial IrO₂, and the‐state‐of‐art reported OER catalysts. Except for the superior activity, they show better durability than their counterparts yet. As revealed by microstructural, spectroscopic, and electrochemical analyses, the enhanced OER performance of DR‐Ni₃FeN/N‐G nanohybrids originates from the abundant twin crystal defects in Ni₃FeN active phase and the strong interplay between DR‐Ni₃FeN and N‐G.