A new ATM adaptation layer for TCP/IP over wireless ATM networks

This paper describes the design and performance of a new ATM adaptation layer protocol (AAL‐T) for improving TCP performance over wireless ATM networks. The wireless links are characterized by higher error rates and burstier error patterns in comparison with the fiber links for which ATM was introduced in the beginning. Since the low performance of TCP over wireless ATM networks is mainly due to the fact that TCP always responds to all packet losses by congestion control, the key idea in the design is to push the error control portion of TCP to the AAL layer so that TCP is only responsible for congestion control. The AAL‐T is based on a novel and reliable ARQ mechanism to support quality‐critical TCP traffic over wireless ATM networks. The proposed AAL protocol has been validated using the OPNET tool with the simulated wireless ATM network. The simulation results show that the AAL‐T provides higher throughput for TCP over wireless ATM networks compared to the existing approach of TCP with AAL 5. This revised version was published online in July 2006 with corrections to the Cover Date.     

Performance of H.263 video transmission over wireless channelsusing hybrid ARQ

This paper proposes a hybrid ARQ error control scheme based on the concatenation of a Reed-Solomon (RS) code and a rate compatible punctured convolutional (RCPC) code for low-bit-rate video transmission over wireless channels. The concatenated hybrid ARQ scheme we propose combines the advantages of both type-I and type-II hybrid ARQ schemes. Certain error correction capability is provided in each (re)transmitted packet, and the information can be recovered from each transmission or retransmission alone if the errors are within the error correction capability (similar to type-I hybrid ARQ). The retransmitted packet contains redundancy bits which, when combined with the previous transmission, result in a more powerful RS/convolutional concatenated code to recover information if error correction fails for the individual transmissions (similar to type-II hybrid ARQ). Bit-error rate (BER) or signal-to-noise ratio (SNR) of a radio channel changes over time due to mobile movement and fading. The channel quality at any instant depends on the previous channel conditions. For the accurate analysis of the performance of the hybrid ARQ scheme, we use a multistate Markov chain (MSMC) to model the radio channel at the data packet level. We propose a method to partition the range of the received SNR into a set of states for constructing the model so that the difference between the error rate of the real radio channel and that of the MSMC model is minimized. Based on the model, we analyze the performance of the concatenated hybrid ARQ scheme. The results give valuable insight into the effects of the error protection capability in each packet, the mobile speed, and the number of retransmissions. Finally, the transmission of H.263 coded video over a wireless channel with error protection provided by the concatenated hybrid ARQ scheme is studied by means of simulations     

An integrated FEC coding scheme for ATM transmission over regenerative satellite networks

The application of asynchronous transfer mode (ATM) on both wireless and satellite networks requires system adaptation. This adaptation has to improve the overall system's performance, and achieve high quality‐of‐service classes approaching that for fibre‐optic communications. In this paper, a new integrated forward‐error‐correction (FEC) coding scheme is introduced for ATM transmission over regenerative satellite networks. The proposed FEC scheme is a concatenation of two Reed–Solomon codes tailored for the header and payload parts of the ATM cell. This integrated coding scheme is shown to significantly improve the cell loss ratio as compared to the standard CRC code used in the ATM cell header. We obtain both upper and lower performance bounds for the concatenated code and check their accuracy when compared to exact system's performance. Both analytical and simulation results show that a cell loss ratio and bit‐error rate (BER) of 10^?25 and 10^?7 can be, respectively, achieved with minimum delay requirements on the SATCOM link. Finally, an approximation for the system's throughout is obtained. It is shown that using a hybrid selective‐repeat automatic‐repeat‐request (SR‐ARQ) with the RS code, a large throughput of approximately 0.843 can be achieved at BERs lower than 10^?7 for data services. Copyright © 2005 John Wiley & Sons, Ltd.     

Error correction and error detection techniques for wireless ATM systems

Error correction and error detection techniques are often used in wireless transmission systems. The Asynchronous Transfer Mode (ATM) employs Header Error Control (HEC). Since ATM specifications have been developed for high‐quality optical fiber transmission systems, HEC has single‐bit error correction and multiple‐bit error detection capabilities. When HEC detects multiple‐bit error, the cell is discarded. However, wireless ATM requires a more powerful Forward Error Correction (FEC) scheme to improve the Bit Error Rate (BER) performance resulting in a reduction in the transmission power and antenna size. This concatenation of wireless FEC and HEC of the ATM may effect cell loss performance. This paper proposes error correction and error detection techniques suitable for wireless ATM and analyzes the performance of the proposed schemes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Performance of ATM networks under hybrid ARQ/FEC error controlscheme

In ATM networks, fixed-length cells are transmitted. A cell may be discarded during the transmission due to buffer overflow or detection of errors. Cell discarding seriously degrades transmission quality. This paper analyzes a hybrid automatic repeat request/forward error control (ARQ/FEC) cell-loss recovery scheme that is applied to virtual circuits (VCs) of ATM networks. FEC is performed based on a simple single-parity code, while a Go-Back-N ARQ is employed on top of that. Both throughput efficiency and reliability analysis of the hybrid scheme are presented. In the process we investigate the interactive effects of the network parameters (number of transit nodes, traffic intensity, ARQ packet length, …) on the performance. The analysis provides a method for optimizing the FEC code size for a given network specification     

Performance Analysis of Wireless Multimedia DS/CDMA Communications with Power Control and Hybrid ARQ

In this paper, we present aperformance analysis of a wireless multimedia direct-sequence code-divisionmultiple-access(DS/CDMA) system based on different error control schemes and an optimal power control algorithm over multipath Rayleigh fading channels.The error control schemes consist of Forward Error Correction (FEC), diversity, and Automatic Repeat reQuest (ARQ). The concatenated codes with a Reed–Solomon outer code andconvolutional inner code are used as FEC. Since a multimedia system is required to support services with different rates and Quality of Services (QoS), different error control schemes are used to satisfy the requirements of different media. In particular, a power control algorithm which can optimize the capacityperformance of the integrated system is presented. Numerical results will show that power optimization can increase the capacity and decrease the total transmission power. By incorporating diversity and hybrid ARQ along with appropriate code ratesin the optimal power controlled system, dramatic increase in system capacitycan also be achieved.     

Improving Wireless TCP Throughput by a Novel TCM-Based Hybrid ARQ

A novel hybrid ARQ (HARQ) scheme using a concatenated two-state trellis-coded modulation (CT-TCM) code is proposed for improving wireless TCP throughput. A distinguished feature of the proposed scheme is that the heavily punctured TCM codes are used for retransmissions of the corrupted data block, which are combined at the receiver with the previously received sequences of the same data block for decoding. By this method, significantly improved coding gain and efficient spectrum utilization can be achieved with very low complexity. A Markov model is developed to evaluate TCP throughput over the proposed HARQ in wireless link. By both analysis and simulation, we demonstrate that compared with other existing TCM-based ARQ schemes, significant improvement of TCP throughput over wireless links is achieved by the proposed CT-TCM HARQ while smaller buffer size is required at the access point.     

Hybrid ARQ schemes for point-to-multipoint communication overnonstationary broadcast channels

Hybrid automatic-repeat-request (ARQ) error control schemes make use of both error detection and error correction in order to achieve high throughput and low undetected error probabilities on two way channels. Two hybrid ARQ schemes, termed hybrid go-back-N (HGB- N) and hybrid selective-repeat (HSR), are proposed for point-to-multipoint communications over broadcast channels. Both schemes incorporate a concatenated code for error correction and error detection. The performance study of the hybrid schemes is based on a two-state Markov model of a burst noise channel. An analytic solution is derived for the throughput efficiency of the HSR scheme, while approximations and computer simulation are used to evaluate the throughput efficiency of the HGB-N scheme. It is shown that the schemes perform considerably better than the corresponding pure ARQ schemes in which a block code is used for error detection only, especially in environments with a large number of receivers and large channel roundtrip delays, such as satellite broadcast links     

无线ATM系统的混合纠错方案及其在突发信道上的性能分析

本文提出了一种适用于无线ATM系统的混合纠错方案:用RS码保护话音信号,用截短RS/混合Ⅱ型ARQ保护图像和数据。文中分析和仿真了这一混合纠错方案在突发信道上的性能。结果表明,利用RS码强的纠错能力,通过有限次的重传就可获得低的信元丢失率和传输时延。     

A recommended error control architecture for ATM networks withwireless links

This paper provides performance results through analysis and simulation for key error control problems encountered in using wireless links to transport asynchronous transfer mode (ATM) cells. Problems considered include the forward-error correction (FEC) and interleaving at the physical layer, the impact of wireless links on the ATM cell header-error control (HEC) sand cell delineation (CD) functions, the application of data link automatic repeat-request (ARQ) for traffic requiring reliable transport, and the impact of the choice of end-to-end ARQ protocol for reliable service. We conclude that it is very important to make the physical layer as SONET-like as possible through the use of powerful FEC, interleaving, and ARQ. These additional error control measures are especially necessary for disturbed channels because of the degrading effects of the channel on higher-layer functions. A recommended error control architecture is given with tradeoffs     

Design of MAC-defined aggregated ARQ schemes for IEEE 802.11n networks

Based on the IEEE 802.11n standard, frame aggregation is considered one of the major factors to improve system performance of wireless local area networks (WLANs) from the medium access control (MAC) perspective. In order to fulfill the requirements of high throughput performance, feasible design of automatic repeat request (ARQ) mechanisms becomes important for providing reliable data transmission. In this paper, two MAC-defined ARQ schemes are proposed to consider the effect of frame aggregation for the enhancement of network throughput. An aggregated selective repeat ARQ (ASR-ARQ) algorithm is proposed, which incorporates the conventional selective repeat ARQ scheme with the consideration of frame aggregation. On the other hand, the aggregated hybrid ARQ (AH-ARQ) protocol is proposed to further enhance throughput performance by adopting the Reed-Solomon block code as the forward error correction (FEC) scheme. Novel analytical models based on the signal flow graph are established in order to realize the retransmission behaviors of both schemes. Simulations are conducted to validate and compare the proposed ARQ mechanisms with existing schemes based on service time distribution. Numerical results show that the proposed AH-ARQ protocol outperforms the other retransmission schemes owing to its effective utilization of FEC mechanism.     

无线视频的一种码率控制方法

无线信道的高误码率对视频图像质量有很大的影响,前向纠错(FEC)和自动重发请求(ARQ)对于降低无线信道的误码率,提高图像质量有很好的效果。通过对FEC和ARQ方法的有效性分析,在TMN8的基础上提出一种简单的混合FEC/ARQ自适应模式选择码率控制方法。该方法首先预测报文丢失数量和纠错报文传输时延,从而选择合适的纠错编码模式,并为纠错编码分配比特数。实验结果表明该方法有效降低无线信道下报文丢失率,显著提高了图像质量。     

PEEC: a channel-adaptive feedback-based error

Reliable transmission is a challenging task over wireless LANs since wireless links are known to be susceptible to errors. Although the current IEEE802.11 standard ARQ error control protocol performs relatively well over channels with very low bit error rates (BERs), this performance deteriorates rapidly as the BER increases. This paper investigates the problem of reliable transmission in a contention free wireless LAN and introduces a packet embedded error control (PEEC) protocol, which employs packet-embedded parity symbols instead of ARQ-based retransmission for error recovery. Specifically, depending on receiver feedback, PEEC adaptively estimates channel conditions and administers the transmission of (data and parity) symbols within a packet. This enables successful recovery of both new data and old unrecovered data from prior transmissions. In addition to theoretically analyzing PEEC, the performance of the proposed scheme is extensively analyzed over real channel traces collected on 802.11b WLANs. We compare PEEC performance with the performance of the IEEE802.il standard ARQ protocol as well as contemporary protocols such as enhanced ARQ and the hybrid ARQ/FEC. Our analysis and experimental simulations show that PEEC outperforms all three competing protocols over a wide range of actual 802.11b WLAN collected traces. Finally, the design and implementation of PEEC using an adaptive low-density-parity-check (A-LDPC) decoder is presented.     

A wireless ATM MAC protocol with combined hybrid ARQ and adaptive scheduling with analysis

A combined hybrid automatic repeat request (ARQ) error control and adaptive scheduling scheme is proposed for time-division multiple access/time-division duplex medium access control (MAC) protocols in wireless asynchronous transfer mode (ATM) networks. Specifically, with the aid of proper channel modeling, the performance of various error-control schemes is evaluated. Accordingly, type-II hybrid ARQ is chosen as the error recovery scheme to combat fading effects, while adaptive fair-queueing is designed to achieve a fair and efficient resource allocation in wireless channels. In particular, the weight of a connection used in the fair-queueing algorithm dynamically adapts in terms of varying channel conditions and the types of services. Various simulations are conducted in typical indoor wireless ATM networks. It is shown that the proposed scheme can achieve a high throughput and transfer reliability with minimized delay and cell loss rate when compared with the conventional MAC layer control.     

Modeling TCP SACK performance over wireless channels with semi-reliable ARQ/FEC

Providing reliable data communications over wireless channels is a challenging task because time-varying wireless channel characteristics often lead to bit errors. These errors result in loss of IP packets and, consequently, TCP segments encapsulated into these packets. Since TCP cannot distinguish packet losses due to bit corruption from those due to network congestion, any packet loss caused by wireless channel impairments leads to unnecessary execution of the TCP congestion control algorithms and, hence, sub-optimal performance. Automatic Repeat reQuest (ARQ) and Forward Error Correction (FEC) try to improve communication reliability and reduce packet losses by detecting and recovering corrupted bits. Most analytical models that studied the effect of ARQ and FEC on TCP performance assumed that the ARQ scheme is perfectly persistent (i.e., completely reliable), thus a frame is always successfully transmitted irrespective of the number of transmission attempts it takes. In this paper, we develop an analytical cross-layer model for a TCP connection running over a wireless channel with a semi-reliable ARQ scheme, where the amount of transmission attempts is limited by some number. The model allows to evaluate the joint effect of stochastic properties of the wireless channel characteristics and various implementation-specific parameters on TCP performance, which makes it suitable for performance optimization studies. The input parameters include the bit error rate, the value of the normalized autocorrelation function of bit error observations at lag 1, the strength of the FEC code, the persistency of ARQ, the size of protocol data units at different layers, the raw data rate of the wireless channel, and the bottleneck link buffer size.     

突发信道下无线ATM的前向差错控制方案

在无线ATM网络中，无线信道的高误码率和突发特性要求对无线ATM信元进行较强的误码保护。本文提出了一种有效的前向差错控制（FEC）方案，对信元头采用较强的FEC，对信息域采用较弱的FEC，并针对信道特性和采用的前向差错控制编码的特点进行元头信元内交织，文中对无线ATM信元在突发信道下的信元丢失率和信元信息错误率进行了分析，仿真结果表明该方案在降低信元信息错误率的同时有效地降低了信元丢失率。     

A spread slotted CDMA/ALOHA system with hybrid ARQ for satellitemultiple access

We propose and investigate a new type of satellite multiple access protocol that combines the characteristics of the spread slotted (SS)-ALOHA protocol, code division multiple access (CDMA), and the hybrid automatic repeat request (ARQ) error controlling and retransmission scheme, in order to increase the throughput by reducing the number of retransmissions and to keep the bit error rate (BER) of the satellite link low when the channel experiences heavy traffic. The main feature of our proposed system is the utilization of two different fields in the analysis of the satellite multiple access problem. Since the hub now possesses the forward error correction (FEC) capability to correct errors that appear after the CDMA despreading of the packets, the satellite does not need to ask so often for the retransmission of erroneous packets and will ask for retransmission only when the FEC error correcting capability is exceeded. This paper also presents the adaptive optimization of the balance between the CDMA processing gain and FEC coding gain in order to obtain a better throughput for the SS-CDMA/ALOHA with hybrid ARQ protocol for satellite multiple access. The optimization is made with the constraint of keeping the bandwidth of the transmitted packets constant during all times. According to this, the effective throughput of the protocol (information bits over total transmitted bits ratio) is improved by adaptively changing the CDMA and FEC codes used in the transmission. This adaptive optimization is done by observing the channel status or load and increasing or decreasing both coding schemes' gains. Computer simulations show the performance of the proposed multiple access scheme     

Partially systematic rate-compatible punctured SCCCs

In this letter, we propose and compare some new rate-compatible serially concatenated convolutional code (SCCC) families. To obtain them, inner coded bits only are punctured. However, and this is the novelty proposed in the letter, the puncturing is not limited to inner parity bits, but extended also to inner systematic bits, thus obtaining high rate SCCCs (i.e., beyond the outer code rate). The two main applications of this technique are its use in hybrid Automatic-Repeat-reQuest/Forward-Error Correction (ARQ/FEC) schemes and to achieve unequal error protection (UEP) of an information sequence.     

Modelling ARQ for a High-Speed ATM-Based Wireless LAN

An Automatic Repeat Request (ARQ) scheme is proposed for a wireless ATM LAN based on the MEDIAN concept. Simulations have been performed to demonstrate the consequences of ARQ inclusion in terms of required buffer capacity and resulting cell end-to-end delay. In particular, the behaviour of the ARQ-enhanced system for real-time traffic under non error-free conditions has been examined. The main result of the simulations is that, due to specific properties of the MEDIAN wireless ATM LAN, the proposed ARQ scheme is suitable for real-time ATM services, while yielding virtually error-free links. Next to low cell delay, it features low overhead and low processing complexity whereas it can be readily combined with a simple and efficient MAC scheme.     

Energy Efficient Coded Communication for IEEE 802.15.4 Compliant Wireless Sensor Networks

The multipath nature of the wireless environment does not provide reliable links for robust communication in wireless senor networks (WSNs). These unreliable links increase the error level to a greater extent and therefore, reduces battery life. Hence, there arises a need for developing energy efficient forward error correction code that avoids more energy consuming Automatic Repeat request (ARQ) scheme used in WSNs to improve link reliability. In this paper, we consider a simple block error correction codes such as cyclic and Bose Chaudhuri Hocquenghem (BCH) codes to be used in IEEE 802.15.4 RF transceiver based sensor nodes. The simulations are performed to measure network parameters such as bit error rate, and energy spent per bit under Rayleigh fading channel environment. It is found that BCH code with code rate of 0.8 provides coding gain of 1.6 dB when compared with cyclic and ARQ schemes and proves to be an energy efficient code among the codes considered.