首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 140 毫秒
1.
This work deals with the study of optical and morphological properties of InGaAs/AlGaAs quantum dot(QD) structures grown by molecular beam epitaxy(MBE) . Photoluminescence(PL) emission energies,activation energies of PL quenching and QD sizes are studied as functions of the Al content in the AlyGa1-yAs confining layers(CL) . We show that the PL emission energy of In(Ga) As/AlyGa1-yAs QD structures increases with increasing y and that the sizes of InAs/AlyGa1-yAs QDs decrease with increasing y. By the comparison of the experimental results with those of an effective-mass model developed to calculate the QD fundamental transition energies,we show that the blueshift of emission energy has to be ascribed not only to the increase in barrier discontinuities that confine the carriers into QDs but even to effects related to changes of the QD morphology dependent on CL composition. Moreover,we show that the Al content in the barriers determines also the activation energy of thermal quenching of PL,which depends on the thermal escape of carriers from QD levels. These studies resulted in the preparation of structures with efficient light-emission in the 980 nm spectral window of interest for lightwave communications.  相似文献   

2.
This work deals with the study of optical and morphological properties of InGaAs/AlGaAs quantum dot (QD) structures grown by molecular beam epitaxy (MBE). Photoluminescence (PL) emission energies, activation energies of PL quenching and QD sizes are studied as functions of the Al content in the AlyGal-yAs confining layers (CL). We show that the PL emission energy of In(Ga)As/AlyGal-yAs QD structures increases with increasing y and that the sizes of InAs/AlyGal-yAs QDs decrease with increasing y. By the comparison of the experimental results with those of an effective-mass model developed to calculate the QD fundamental transition energies, we show that the blueshift of emission energy has to be ascribed not only to the increase in barrier discontinuities that confine the carriers into QDs but even to effects related to changes of the QD morphology dependent on CL composition. Moreover, we show that the Al content in the barriers determines also the activation energy of thermal quenching of PL, which depends on the thermal escape of carriers from QD levels. These studies resulted in the preparation of structures with efficient light-emission in the 980 nm spectral window of interest for lightwave communications.  相似文献   

3.
Structural and optical properties of InAs quantum dots (QDs) deposited on the surface of a thick InGaAs metamorphic layer grown on a GaAs substrate have been studied. The density and lateral size of QDs are shown to increase in comparison with the case of QDs grown directly on a GaAs substrate. The rise of In content in the InGaAs layer results in the red shift of the photoluminescence (PL) line, so that with 30 at % indium in the metamorphic layer the PL peak lies at 1.55 μm. The PL excitation spectroscopy of the electronic spectrum of QDs has shown that the energy separation between the sublevels of carriers in QDs decreases as the In content in the InGaAs matrix increases. __________ Translated from Fizika i Tekhnika Poluprovodnikov, Vol. 38, No. 7, 2004, pp. 867–871. Original Russian Text Copyright ? 2004 by Kryzhanovskaya, Gladyschev, Blokhin, Musikhin, Zhukov, Maksimov, Zakharov, Tsatsul’nikov, Ledentsov, Werner, Guffart, Bimberg.  相似文献   

4.
Structural and optical properties of InAs quantum dots (QDs) grown in a wide-bandgap Al0.3Ga0.7As matrix is studied. It is shown that a high temperature stability of optical properties can be achieved owing to deep localization of carriers in a matrix whose band gap is wider than that in GaAs. Specific features of QD formation were studied for different amounts of deposited InAs. A steady red shift of the QD emission peak as far as ∼1.18 μm with the effective thickness of InAs in Al0.3Ga0.7As increasing was observed at room temperature. This made it possible to achieve a much higher energy of exciton localization than for QDs in a GaAs matrix. To obtain the maximum localization energy, the QD sheet was overgrown with an InGaAs layer. The possibility of reaching the emission wavelength of ~1.3 μm is demonstrated. __________ Translated from Fizika i Tekhnika Poluprovodnikov, Vol. 37, No. 5, 2003, pp. 578–582. Original Russian Text Copyright ? 2003 by Sizov, Samsonenko, Tsyrlin, Polyakov, Egorov, Tonkikh, Zhukov, Mikhrin, Vasil’ev, Musikhin, Tsatsul’nikov, Ustinov, Ledentsov.  相似文献   

5.
The time-resolved photoluminescence and steady photoluminescence (TRPL and PL) spectra on self-assembled InAs/GaAs quantum dots (QDs) are investigated. By depositing GaAs/InAs short period superlattices (SLs), 1. 48μm emission is obtained at room temperature. Temperature dependent PL measurements show that the PL intensity of the emission is very steady. It decays only to half as the temperature increases from 15 K to room temperature, while at the same time, the intensity of the other emission decreases by a factor of 5 orders of magnitude. These two emissions are attributed to large-size QDs and short period superlattices (SLs), respectively. Large-size QDs are easier to capture and confine carriers, which benefits the lifetime of PL, and therefore makes the emission intensity insensitive to the temperature.  相似文献   

6.
Within the effective-mass and finite-height potential barrier approximation,a theoretical study of the effects of strain and hydrostatic pressure on the exciton emission wavelength and electron-hole recombination rate in wurtzite cylindrical GaN/AlxGa1-xN quantum dots(QDs) is performed using a variational approach.Numerical results show that the emission wavelength with strain effect is higher than that without strain effect when the QD height is large(> 3.8 nm),but the status is opposite when the QD height is small(< 3.8 nm).The height of GaN QDs must be less than 5.5 nm for an efficient electron-hole recombination process due to the strain effect.The emission wavelength decreases linearly and the electron-hole recombination rate increases almost linearly with applied hydrostatic pressure.The hydrostatic pressure has a remarkable influence on the emission wavelength for large QDs,and has a significant influence on the electron-hole recombination rate for small QDs.Furthermore,the present numerical outcomes are in qualitative agreement with previous experimental findings under zero pressure.  相似文献   

7.
Molecular beam epitaxy growth of a bilayer stacked InAs/GaAs quantum dot structure on a pure GaAs matrix has been systemically investigated.The influence of growth temperature and the InAs deposition of both layers on the optical properties and morphologies of the bilayer quantum dot(BQD) structures is discussed.By optimizing the growth parameters,InAs BQD emission at 1.436μm at room temperature with a narrower FWHM of 27 meV was demonstrated.The density of QDs in the second layer is around 9×109 to 1.4×1010 cm-2. The BQD structure provides a useful way to extend the emission wavelength of GaAs-based material for quantum functional devices.  相似文献   

8.
Spectroscopic ellipsometry and photoreflectance measurements on CdTe/GaAs strained heterostructures grown by moleculclr beam epitaxy were carried out to investigate the effect of the strain and the dependence of the lattice parameter on the CdTe epitaxial layer thicknesses. Compressive strains exist in CdTe layers thinner than 2 μm. As the strain increases, the value of the critical-point energy shift increases linearly. These results indicate that the strains in the CdTe layers grown on GaAs substrates are strongly dependent on the CdTe layer thickness. Author to whom all correspondence should be addressed.  相似文献   

9.
吕少锋 《光电子快报》2011,7(2):122-125
Based on the analysis of carrier dynamics in quantum dots (QDs), the numerical model of InAs/GaAs QD laser is developed by means of complete rate equations. The model includes four energy levels and among them three energy levels join in lasing. A simulation is conducted by MATLAB according to the rate equation model we obtain. The simulation results of PI characteristic, gain characteristic and intensity modulation response are reasonable. Also, the relations between the left facet reflectivity of laser cavity and threshold current as well as modulation bandwidth are studied. It is indicated that the left facet reflectivity increasing can result in reduced threshold current and improved modulation bandwidth, which is in accordance with experimental results. The internal mechanism of QD lasers is fully described with the rate equation model, which is helpful for QD lasers research.  相似文献   

10.
Direct epitaxial growthⅢ–Ⅴquantum dot(QD)structures on CMOS-compatible silicon substrates is considered as one of the most promising approaches to achieve low-cost and high-yield Si-based lasers for silicon photonic integration.However,epitaxial growth ofⅢ–Ⅴmaterials on Si encounters the following three major challenges:high density of threading dislocations,antiphase boundaries and thermal cracks,which significantly degrade the crystal quality and potential device performance.In this review,we will focus on some recent results related to InAs/GaAs quantum dot lasers on Si(001)substrates byⅢ–Ⅴ/Ⅳhybrid epitaxial growth via(111)-faceted Si hollow structures.Moreover,by using the step-graded epitaxial growth process the emission wavelength of InAs QDs can be extended from O-band to C/L-band.High-performance InAs/GaAs QD microdisk lasers with sub-milliwatts threshold on Si(001)substrates are fabricated and characterized.The above results pave a promising path towards the on-chip lasers for optical interconnect applications.  相似文献   

11.
We present a study on InAs/InGaAs QDs nanostmctures grown by molecular beam epitaxy on InGaAs metamorphic buffers,that are designed so as to determine the strain of QD and, then, to shift the luminescence emission towards the 1.5 μm region (QD strain engineering). Moreover, we embed the QDs in InAlAs or GaAs barriers in addition to the InGaAs confining layers, in order to increase the activation energy for confined carrier thermal escape; thus, we reduce the thermal quenching of the photoluminescence, which prevents room temperature emission in the long wavelength range. We study the dependence of QD properties, such as emission energy and activation energy, on barrier thickness and height and we discuss how it is possible to compensate for the barrier-induced QD emission blue-shift taking advantage of QD strain engineering. Furthermore, the combination of enhanced barriers and QD strain engineering in such metamorphic QD nanostructures allowed us to obtain room temperature emission up to 1.46 μm, thus proving how this is a valuable approach in the quest for 1.55 μm room temperature emission from QDs grown on GaAs substrates.  相似文献   

12.
We studied the dependence of the photoluminescence emission energy of InGaAs/AlGaAs quantum dot (QD) structures grown by molecular beam epitaxy as a function of the Al and In content in barriers and QDs, respectively. We show that emissions are blue-shifted by increasing both the Al content in the 0 to 0.30 range and, unexpectedly, the In composition in the 0.4 to 0.7 range; we suggest that such results stem from significant changes in QD sizes, shapes, and composition profiles. This research led to the preparation of structures with efficient light emission in the 980 nm window of optoelectronic interest.  相似文献   

13.
利用分子束外延技术在(100)和(113)B GaAs衬底上进行了有/无AlAs盖帽层量子点的生长,测量了其在4~100 K温度区间的PL光谱。通过对PL光谱的积分强度、峰值能量和半高宽进行分析进而研究载流子的热传输特性。无AlAs盖帽层的(113)B面量子点的PL光谱的热淬灭现象可以由载流子极易从量子点向浸润层逃逸来解释。然而,有AlAs盖帽层的(113)B量子点的PL热淬灭主要是由于载流子进入了量子点与势垒或者浸润层界面中的非辐射中心引起的。并且其PL的温度依存性与利用Varshni定律计算的体材料InAs的温度依存性吻合很好,表明载流子通过浸润层进行传输受到了抑制,由于AlAs引起的相分离机制(113)B量子点的浸润层已经消失或者减小了。(100)面有AlAs盖帽层的PL半高宽的温度依存性与无AlAs盖帽层的量子点大致相同,表明在相同外延条件下相分离机制在(100)面上不如(113)B面显著。  相似文献   

14.
Injection lasers based on InGaAs quantum dots in an AlGaAs matrix   总被引:1,自引:0,他引:1  
Arrays of vertically coupled InGaAs quantum dots (QDs) in an AlGaAs matrix have been used in injection lasers. Increase in the band gap of a matrix material by replacement of a GaAs matrix with an AlGaAs one led to dramatic increase in quantum dot localization energy. By using this approach, we reduced the thermal population of the matrix and wetting layer states and thus decreased room temperature threshold current density to 63 A/cm2, increased differential efficiency up to 65%, and achieved room temperature continuous wave operation with output power of 1 W. Negative characteristic temperature has been observed in temperature dependence of threshold current density of these lasers in some temperature range. A qualitative explanation assuming a transition from non-equilibrium to Fermi population of QD states is proposed.  相似文献   

15.
This study demonstrated the feasibility of fabricating a highly stacked vertically aligned InGaAs/GaAs(Sb) quantum dot (QD) structure with an AlGaAsSb spacer layer for improving the device performance of QD intermediate‐band solar cell (QD‐IBSC) devices. The power‐dependent photoluminescence measurements of the proposed structure revealed a blueshift in the QD ground‐state emissions when the excitation power was increased, indicating the formation of an intermediate band inside the QD structure. Capping the InGaAs QDs with a GaAsSb layer prevented the QDs from collapsing because there was less In–Ga intermixing between the QDs and GaAsSb layer. In addition to maintaining the QD structure, the carrier lifetime was extended by tuning the energy band alignment of the InGaAs/GaAsSb QD structure. Inserting the AlGaAsSb layer into the spacer layer increased the band gap, which in turn increased the open‐circuit voltage of the QD‐IBSC. The QD‐IBSC in this work shows an extension of external‐quantum efficiency by up to 1200 nm (compared with a GaAs reference cell) through the absorption by QDs and increased the open‐circuit voltage from 0.67 to 0.70 V by adopting the AlGaAsSb spacer layer. These results confirm that adopting a columnar InGaAs/GaAs(Sb) QD structure with a AlGaAsSb spacer layer can enhance the performance of QD‐IBSC devices. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

16.
We have investigated electron emission from self-assembled In0.5Ga0.5As/GaAs quantum dots (QDs) grown by molecular-beam epitaxy (MBE). Through detailed deep level transient spectroscopy comparisons between the QD sample and a reference sample, we determine that trap D, with an activation energy of 100 meV and an apparent capture cross section of 5.4×10−18 cm2, is associated with an electron quantum level in the In0.5Ga0.5As/GaAs QDs. The other deep levels observed, M1, M3, M4, and M6, are common to GaAs grown by MBE.  相似文献   

17.
We present a study on the effects of quantum dot coverage on the properties of InAs dots embedded in GaAs and in metamorphic In0.15Ga0.85As confining layers grown by molecular beam epitaxy on GaAs substrates. We show that redshifted emission wavelengths exceeding 1.3 μm at room temperature were obtained by the combined use of InGaAs confining layers and high quantum dot coverage. The use of high InAs coverage, however, leads to detrimental effects on the optical and electrical properties of the structures. We relate such behaviour to the formation of extended structural defects originating from relaxed large-sized quantum dots that nucleate in accordance to thermodynamic equilibrium theories predicting the quantum dot ripening. The effect of the reduced lattice-mismatch of InGaAs metamorphic layers on quantum dot ripening is discussed in comparison with the InAs/GaAs system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号