首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
毫米波与红外相复合的遥、近感系统中,天线的复用是一个关键问题。本文提出用频率选择表面来设计复用融面,实现透过毫米波而反射红外的双工性能。理论分析和实验结果都证明了该方案的有效性,样品对毫米波的透过率和对红外的反射率均可大于90%。该复用面还具有适用于双色红外系统的优点,克服了光学结构仅可用于单色红外的不足。  相似文献   

2.
万顺生  卫民 《激光与红外》2000,30(5):293-295
采用FSS来设计天线复和副现,实现透过毫米波而反射红外的双工性能。理论分析和实验结果都证明了该方案的有效性,样件对毫米波的透射率和对红外的反射率均可大于90%。该复用而还具有适用于双色红外系统的优点,克服了光学结构仅可用于单色红外的不足。  相似文献   

3.
毫米波/红外复合制导半实物仿真中需要使用二向色镜,用于透射毫米波、反射红外,提出了用分形频率选择表面(FSS)实现二向色镜的方法,设计了一种8 mm和3 mm波段双频带通的Y环分形FSS,基于频域有限差分法(FDFD)和周期边界对其进行了仿真分析,并进行了实物研制.仿真和测试结果表明,该分形FSS结构具有稳定而优良的频率特性,同时圆极化性能好、工程实现简单,而且对大于5 μm的红外信号反射率最高接近90%.特别是这种二向色镜可以同时应用于8 mm和3 mm波段毫米波/红外半实物仿真系统,具有良好的复用特性,因此有很好的应用前景.  相似文献   

4.
红外/毫米波多模寻的系统关键技术分析   总被引:6,自引:0,他引:6  
概述了红外/毫米波多模寻的系统的主要技术特点,对多谱段头罩的选材,外形与厚度的设计进行了计算与理论分析;探讨了适宜于多模导引头的多种类型稳定位标器和复合天线系统系统方案;重点对外/毫米波融合处理器系统进行了研究,针对红外,毫米波探测系统的输出信息,确定了多模寻的系统的融合层次与融合准则。  相似文献   

5.
本文首先介绍了红外和毫米波制导武器的发展现状,指出这种威胁的严重性.最后简要介绍美国研制的一种坦克载红外/毫米波告警系统。  相似文献   

6.
本文首先介绍了红外和毫米波波制导武器的发展现状,指出这种威胁的严重性,最后简要介绍美国研制的一种坦克载红外/毫米波告警系统。  相似文献   

7.
雷达/红外复合导引头信息融合算法   总被引:1,自引:0,他引:1  
毫米波雷达/ 红外成像复合制导已成为当前多模复合制导技术的研究热点。从毫米波雷达/ 红外成像复合导引头系统的特点及其工程应用出发,建立了一种基于联邦滤波(FF)的分布式雷达/ 红外复合导引头信息融合算法。首先,针对扩展卡尔曼滤波存在线性化误差以及雷达测量噪声非高斯的特点,采用粒子滤波算法(PF)设计雷达子滤波器;针对红外传感器不能测量目标距离的特点,采用伪线性卡尔曼滤波算法(PLKF)设计红外子滤波器。然后通过主滤波器进行信息融合,并对两个子滤波器进行信息分配和重置。仿真结果表明,该信息融合算法能够有效地提高雷达/红外复合导引头系统的目标跟踪精度及系统的稳定性。  相似文献   

8.
当前30~300GHz的毫米波应用正在增加,特别是94GHz富有吸引力的系统特性,如较小的波长、较高的隔离和较小的天线尺寸促进了对该频率下器件和系统的研究开发。有源和无源毫米波系统可用于目标探测、地形成象、通信、数据传输、水平传感器及应用于红外系统不...  相似文献   

9.
张科  梁敏  张文峦 《红外技术》2006,28(6):334-337
针对跟踪过程中,由于目标机动的随机性,可能出现目标跟踪丢失的情况,提出了一种融合毫米波数据和红外数据的目标跟踪技术。将毫米波和红外两传感器的工作频率设成互补状态,用毫米波传感器进行测距,红外传感器进行测角,并分别独立的对观测空间进行门限滤除,然后对两传感器门限滤除后所获得的数据利用D-S证据理论进行融合,最后利用融合后更加精确的数据进行目标关联,形成航迹。该技术可以实现全天候工作。实验证明了该方法的有效性。  相似文献   

10.
王光复 《红外》2009,30(11):40-44
信息融合技术是毫米波/红外复合制导的关键技术之一,其中目标跟踪算法的优劣直接决定了系统的性能.针对毫米波与红外复合制导的目标跟踪,首先对毫米波传感器和红外传感器的量测数据进行了融合,并提出了一种改进的跟踪滤波算法.该跟踪算法能根据目标的机动情况实时获得滤波增益,并及时调整滤波方程,从而获得良好的跟踪效果.最后对目标的直线运动和改变航向的直线运动进行了仿真分析.仿真结果表明,与其它滤波算法相比,该算法的跟踪效果良好,跟踪精度较高且计算量少.  相似文献   

11.
This paper presents the design, construction and testing of perturbed periodicity slot type grounded Frequency Selective Surface (FSS) array as millimeter wave (mm-wave) random phase diffusers to eliminate speckle in active mm-wave imaging. To create a random phase diffuser for destroying the coherence of mm-wave sources we proposed FSS based diffusers arrays where the periodicities between the elements are different thought the slot of the cells are similar. The impacts of periodicity variations of both TM and TE field directions have been investigated. The periodicity of an FSS is the main design parameter used to optimize the phase shifting properties of the arrays. The critical parameters of the diffuser arrays design, such as phase relation with periodicity and optimum designed consideration are discussed. We designed the FSS arrays with Finite Integral Technique, fabricated by using etching technique and characterized the S-parameters with a free space Millimeter Wave Vector Network Analyzer (MVNA).  相似文献   

12.
Rising progress of mm-wave technology in spectroscopy, remote-sensing and its prospective application in communications requires accurate radiation beam characterization in quasi-optical systems. Gaussian approximation is a well-known practical model at optical and infrared wavelengths, and here we try to show the performance and limits of this method for the horn antenna as a classical mm-wave radiation source. This approach provides a compact and more practical analytical tool to design and optimize quasi-optical systems, compared to electromagnetic (EM) full-wave solutions. The radiation pattern (beam shape) and the phase distribution are studied analytically, both with the EM full-wave method and Gaussian approximation. Comparative results with measurements are presented to verify the analytical process and show the feasibility of the method for conventional horns.  相似文献   

13.
A novel mm-wave phase modulating transmit architecture, capable of achieving data rates as high as 10 Gb/s is presented at 120 GHz. The circuit operates at a frequency of 120 GHz. The modulator consists of a differential branchline coupler and a high speed 4-to-1 analog multiplexer with direct digital input. Both a QPSK as well as a 8QAM constellation are supported. To achieve high output power, a 9-stage power amplifier is designed and connected to the multiplexer output. The complete chip is integrated in a 65 nm low power CMOS technology. Capacitive neutralization is used to achieve high gain and good stability for the MOS devices. Also, various differential transmission line topologies are investigated to achieve high performance in terms of loss and area consumption.  相似文献   

14.
A frequency selective surface (FSS) was designed to have a resonant spectral signature in the infrared. The lithographically composed, layered structure of this infrared FSS yields a resonant response in absorption to infrared radiation at a wavelength determined by its FSS element structure and the structure of its substrate layers. The infrared spectral characteristics of this surface are studied via Fourier transform infrared spectroscopy and spectral radiometry in the 3 to 15 /spl mu/m region of the spectrum. The design is based on circuit-analog resonant behavior of square loop conducting elements.  相似文献   

15.
——本文概述了目前国际上毫米波固体器件的发展动态.毫米波固体器件是实现毫米波系统固态化和小型化的关键.文中详细评述了毫米波固体功率器件、接收器件和单片集成电路,并介绍了毫米波超导器件以及某些新原理、新结构的毫米波固体器件.最后简要地报导了国内毫米波固体器件的研制情况.  相似文献   

16.
王祯祥  胡凯 《红外与激光工程》2021,50(11):20210072-1-20210072-6
扫描式红外成像传感器在遥测遥感、卫星成像等远距离成像领域具有广泛的应用。为了缓解信噪比相对较低而影响图像质量的问题,提出了一种时间延时积分(TDI)型读出电路。该读出电路由电容跨阻放大器(CTIA)像素电路阵列、并行TDI电路、多路开关选择电路和输出缓冲器等组成。为实现对宽动态范围光电流的处理,CTIA电路设计有多档可选增益,且非线性度小于0.3%。该读出电路采用0.35 μm CMOS工艺设计与制造,芯片面积约为1.3 mm×20 mm,采用5 V电源时功耗小于60 mW。为了评估1024×3 TDI读出电路的功能,采用了对TDI输入端注入不同电压激励的方式进行测试,测试结果验证了所提出的设计方案。  相似文献   

17.
A new technique to generate a millimeter(mm)-wave carrier of 32.57 GHz(fLO=10.85 GHz) with single sideband modulation(SSB) for radio-over-fiber(RoF) systems is experimentally demonstrated by using stimulated Brillouin scattering(SBS).The SSB is realized by directly amplifying the +3rd sideband of the modulated optical carrier in the process of SBS.The pump wave is provided through a double Brillouin scattering frequency shifting configuration.The use of the same laser source to generate the pump wave ensures the stability of the mm-wave generation system since the relative frequency shift between them can be eliminated.In addition, the mm-wave carrier obtains an RF power gain of 21 dB with the SBS amplification and a 3-dB bandwidth of 10kHz.  相似文献   

18.
罗振敖  谢亮  漆晓琼  王辉 《半导体学报》2011,32(9):092004-4
本文提出了一种基于受激布里渊散射原理的单边带调制产生30GHz毫米波的新方法,可应用于光载射频系统。该方法利用一个双布里渊散射移频结构生成泵浦光,并将其反向注入到传输信号光的25 km单模光纤;通过受激布里渊散射,直接放大受调制信号光的正三阶边带,实现光载波的单边带调制,有效改善由色散效应引入的功率涨落问题,保证了毫米波功率稳定。此外,信号光和泵浦光由同一个激光器产生,有效消除两者间的相对频率漂移,从而大大提升了毫米波生成系统的频率稳定性。通过我们的方法,实验系统所生成的毫米波功率增益了21dB,其3dB线宽为10kHz。  相似文献   

19.
Numerically analyzed is the transmission performance of the optical millimeter(mm)-wave generated by frequency up-conversion via a phase modulator along the dispersive fiber.60 GHz mm-wave sub-carrier(SC)signals can be obtained after fiber transmission,simultaneously,the phase-modulated signals can be converted to the intensity-modulated ones.The numerical results show that the optical mm-wave at fading loops has better performance,and the eye diagram still keeps open when optical mm-wave signal is transmit...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号