一种基于零树的多码率小波图象编码方法

本文研究以零树方法进行小波图象压缩编码，在零树编码各级小波系数前，根据不同分解级小波系数幅值间的相关特性，通过以树结构对小波系数的能量人三测与排序，不仅优化了码率的分配，提高了编码图象ＰＳＮＲ约０．３－０．５ｄＢ，而且加速了编码过程各纳１０％，同时该编码方案仍保零树编码产生嵌入式码流，支 持多码率图象解码。     

一种改进的图像自适应零树编码方法

在研究Shapiro零树图像编码方案的基础上,提出了一种改进型的自适应嵌入式零树编码方法.本算法利用自适应的小波系数,增加了编码过程中零树个数,提高了编码效率,使在相同压缩率情况下,提高PSNR约为0.1~0.6dB,同时该编码方案仍保持零树编码产生嵌入式码流、支持多码率解码的特点.     

支持可变分辨率的SPIHT编码算法

为了适应移动多媒体通信中终端设备显示尺寸多样性的要求,本文将图像缩放嵌入编码过程中,提出了一种基于线裁剪（seam carving, SC）的支持可变分辨率的多级树集合排序（set portioning in hierarchical trees,SPIHT）图像编码算法。该算法在构造新的基于根节点的空间方向树的基础上,利用SC生成基于块的线能量图来引导编码,获得空域可伸缩的码流;解码端仅需获取与终端设备显示尺寸相关的码流即可完成解码和图像缩放。实验结果表明,当编码和解码图像的分辨率一致时,本文算法的率失真（rate-distortion, R-D）性能逼近传统的SPIHT算法;当解码图像的分辨率可变时,本文算法在压缩码率与重建图像的主观质量上均优于传统的SPIHT算法。      

基于多级零树编码的小波系数网格编码量化

该文提出了对小波图像作多级零树编码后进行网格编码量化（TCQ）的新方法。首先利用子带间的相关性进行零树编码，然后利用卷积编码和信号空间扩展来增大量化信号间的欧氏距离，并用Viterbi算法寻找最优量化序列。仿真结果表明，该方法比零树编码后采用最优量化要提高0．3dB左右。该方法还具有编码计算复杂度适中，解码简单的优点。     

基于三维小波变换嵌入式视频压缩算法的研究

本文把二维图像的等级树集分割编码方法(SPIHT)推广应用于三维的视频编码中,提出了一种用于三维视频序列图像的扩展等级树集分割编码方法.此方法所编码码流是嵌入式码流,在解码端可随意截取一段码流解码以达到所要求的码率和视频质量.另外此方法无需进行运动补偿,降低了算法的复杂度.通过理论分析和仿真实验得出,此方法有很好的编码效率,但对于帧内图像较复杂的序列,编码效率有所下降.     

ATM网中可变比特率小波视频编码和码率控制

本文提出了小波视频编码系统及其码率控制的新方法。对原始图像序列进行时间、水平和垂直三维小波分解,并采用改进的等级树集合分区的算法对小波系数进行量化。在图像组级上对该编码器进行码率控制,使其输出码流遵循漏桶控制器的参数,并对不同大小的漏桶缓冲器进行了讨论。仿真实验证明了该编码系统及其码率控制方法的有效性。     

JPEG2000实时截断码率控制新算法及其VLSI结构设计

提出一种实时编码实时截断的码率控制算法.它根据已分解的小波子带内码块有效位平面数来预测未分解的小波子带内码块有效位平面数,并根据编码通道数和小波/量化权系数为当前编码码块分配码率.并提出一种JPEG2000编码实时截断,两级码率控制的编码体系结构.第一级采用本文提出的算法实时截断码流和编码通道.第二级在低码率下采用JPEG2000标准的PCRD优化算法搜索精确的分层截断点.在最优分层截断之前多数码流和编码通道被预先截断,存储器损耗小,实时性高.低码率下,图像质量跟JPEG2000标准一致.     

一种基于信源划分定理的小波帧内编码方法

本文在SPIHT算法的基础上，基于信源划分定理提出了一种新的小波系数量化编码算法。这种算法更好的利用了小波系数的统计特性，可以获得比SPIHT算法更高的压缩效率，并且能够产生完全嵌入码流。实验表明，这种算法非常适合于极低码率视编码的帧内编码，在相同压缩比下，能够取得比H.263 帧内编码器更好的重建图像质量。     

一种时域质量稳定的三维小波视频编码率控制技术

三维小波视频编码提供了分辨率、时域和质量的可伸缩性。在三维小波编码中，如何调整各小波频带间的码率分配以达到最佳的码率控制至关重要。就小波变换和反变换的结构而言，常规的三维小波视频编码方法会导致解码视频帧沿时间方向播放质量的周期振荡，这种周期的振荡会影响了观看质量。本文研究了重建信号与小波频带间失真分布的关系，提出了一种具有稳定的时域解码质量的率控制方法，实验结果表明该算法在保证播放质量稳定的同时，还具有与常规三维小波视频编码方法近似的平均解码质量。     

一种基于运动补偿三维小波的 多描述视频编码方法

 本文将多描述编码与运动补偿三维小波可扩展视频编码相结合,提出了一种基于运动补偿三维小波的多描述视频编码方法.该方法首先根据编码序列的运动特性,自适应地进行每个描述的码率分配,以控制各个描述中的冗余,然后将编码序列的关键信息-运动矢量和低频帧码流复制到两个描述中,并将高频帧码流分配到不同的描述中.在解码端根据正确接收信息的不同,采用不同的方法进行视频重建.实验结果表明,与单描述编码方法相比,在信道丢包率较高的情况下,本文方法可以提供更好的传输鲁棒性.     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

社长序言（英文）

正Happy New Year!As we step into a new year,we take a look back at the key feature topics covered in China Communications over the past 12 months and set out our expecta-     

Call for Papers

正Introduction Jointly sponsored by the China Institute of Communications(CIC)and the IEEE Communications Society(IEEE ComSoc)since the year 2013,China Communications,currently,is aiming to gradually realise the transition from journal to magazine content and style.     

INTEGRATION OF OPTICAL AND WIRELESS NETWORKS

正For a long time,optical and wireless systems/net-works are developed in separate communities witha few attempts for in-depth convergence.In fact,it prom-ises many advantages to combine the optical and wire-less technologies in the levels of systems and networks.Recently,both academia and industry have made manyefforts to enter a new phase of development to take op-tical and wireless systems as fully integrated networks.To provide high bandwidth and reliable service for bothfixed and mobile users,a well-designed network must     

Call for Papers—Feature Topic,Vol.12,No.3,2015

正Smart Grid Communications The electric power industry is undergoing profound changes as the industry aims to capture the promise of a smart grid for a sustainable energy future.Enabled by the advanced sensing devices such as Phasor Measurement Units(PMUs),increasingly powerful