首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
取样光纤Bragg光栅特性的数值模拟分析   总被引:1,自引:0,他引:1  
文章应用传输矩阵法对取样光纤布拉格光栅(SFBG)的反射谱进行了数值模拟,并分析了折射率调制幅度、占空比、取样周期和光栅长度等光栅参数对其反射谱的影响,在此基础上用切趾函数对其进行旁瓣干扰处理,得到了较为理想的8通道SFBG反射谱.  相似文献   

2.
具有切践包络的的线性啁啾光纤光栅是用于色散补偿的重要源器件。通过切趾的方法可以减少啁啾光纤光栅内的时延振荡,同时减小反射谱中的瓣。用数值方法分析了不同切趾包络函数对光栅特性的影响,得到了色散补偿最佳包络函数及其参数,给出了最佳包络的普遍特征。  相似文献   

3.
啁啾光纤光栅的传输特性与切趾变迹研究   总被引:1,自引:0,他引:1  
从麦克斯韦电磁理论导出的耦合模方程出发,应用研究非均匀光纤光栅的传输矩阵法数值研究了啁啾光栅前向波的能量传输、反射谱和时延特性,进而分析比较光纤光栅切趾变迹对反射和时延的影响以及在色散管理方面的应用.通过研究找出了一种余弦切趾函数的光纤光栅,从其特性分析可知这种变迹可以应用在波分复用/解复用、多通道的色散补偿、多通道滤波器等方面.  相似文献   

4.
均匀光纤布拉格光栅(fiber Bragg grating, FBG)的反射谱存在旁瓣干扰,对波长解调过程会产生一定干扰,从而对传感测量结果造成一定误差。在FBG中引入切趾函数能够解决这一问题,有效抑制旁瓣。通过对切趾函数FBG耦合模理论的分析,获得了光栅参数变化对切趾FBG反射谱的作用情况。仿真实验结果表明,加入切趾函数会对FBG反射谱的旁瓣数量及大小起到明显抑制作用,反射率、中心波长、半高宽度及检测精度等反射谱特性的变化情况会受到光栅参数的影响。  相似文献   

5.
应用耦合模理论和传输矩阵法计算模拟了均匀长周期光纤光栅的透射谱,采用不同的切趾函数对其进行了切趾优化,通过比较得出了最佳的切趾函数。分析了引入多个丌相移的相移长周期光纤光栅的透射谱结构,发现其具有一个通带、两个阻带的滤波特性。着重分析了相移个数,引入位置等参数对谱结构的影响。除运用传统的高斯函数折射率切趾方法对透射谱进行优化外,尝试了一种新型的长度切趾方法,达到了较好的优化效果。该方法的易实现性为切趾相移长周期光纤光栅的实际制作带来了方便。  相似文献   

6.
研究了用于多通道色散补偿器的取样啁啾光纤光栅时延抖动问题,分析了产生时延抖动的腔效应及抑制时延抖动的切趾技术,分析、比较了切趾前后取样啁啾光纤光栅的时延抖动情况,研究结果表明:取样啁啾光纤光栅的时延抖动与其折射率包络调制形成的外腔效应有关,与取样调制形成的多腔效应无关,对取样啁啾光纤光栅进行包络切趾能够有效地抑制时延抖动.  相似文献   

7.
基于耦合模理论,运用传输矩阵法对取样光栅的反射谱进行了数值计算,着重分析了光栅长度、占空比及光栅取样周期对取样光栅反射谱的影响规律,基于特性分析讨论了取样光栅在光纤系统中的应用,为以后具体应用提供了理论指导和参考.  相似文献   

8.
对称切趾啁啾光纤光栅能够抑制反射旁瓣、平滑群时延曲线,但反射谱带宽利用率低.与对称切趾相比,非对称切趾光栅在保持群时延曲线基本不变的前提下,反射谱3 dB带宽提高了64.08%,同时群时延纹波振荡也得到了一定的抑制.利用升余弦函数对光栅的长波长端和短波长端进行了不同比例的切趾仿真,发现长波长端30%切趾、短波长端20%切趾能够有效地提高光栅的反射带宽,同时可将群时延纹波压低在±2 ps之内.  相似文献   

9.
光纤光栅最佳切趾函数的研究   总被引:6,自引:2,他引:4  
黄雯  韩一石等 《光电子.激光》2002,13(12):1247-1251
采用耦合模理论,给出了用传输矩阵法计算光纤Bragg光栅(FBG)特性的方法,进而得到了在不同切趾函数形式下的FBG反射谱的数值解。通过理论分析,给出了最佳切趾函数反射谱和群时延特性曲线。  相似文献   

10.
取样啁啾光纤光栅传输特性的研究   总被引:6,自引:0,他引:6  
运用传输矩阵理论,对一种新型色散补偿光纤光栅——取样啁啾光纤光栅的传输特性进行了模拟研究。研究了光栅反射谱特性随光栅参数的变化规律。作为应用实例,本文给出了适合于对10Gb/s WDM系统进行色散补偿的8通道取样啁啾光栅的相关参数。  相似文献   

11.
In this paper, an analytical method is proposed for calculating reflection-spectrum envelopes (RSEs) of various multipeak gratings. Consequently, impacts of parameters on the envelope of the sampled grating are analyzed in detail both with and without refractive index variation. Accuracy of those proposed methods has been verified by the good agreement with the simulated reflectivity spectrum of the transfer matrix method. A technology of multiple reflection spectrum envelopes concatenation (MRSEC) is proposed to design multipeak gratings with broad flat-top spectrum envelopes: one is the digital concatenated grating; the other is the consecutive interleaved sampled grating. The proposed technology can densify spectral channels of sampled gratings with fixed reflectivity peak space, as well as spatially physical corrugation of structure.  相似文献   

12.
光纤光栅透射谱线的测量   总被引:1,自引:0,他引:1  
在已有光纤光栅调谐技术的基础上,研究了一种由不同光谱特性的光纤光栅组成的光栅对,用于测量光纤光栅谱线结构。并给出了测试结果。  相似文献   

13.
We introduce a new class of high channel count multiwavelength comb filters based on sampled fiber Bragg gratings (FBGs). Our approach exploits the spectral fractional Talbot effect in sampled chirped FBGs (S-CFBGs). For specific conditions between the grating chirp and sampling period, the channel spacing can be reduced compared to the value obtained using conventional sampling techniques. In this way, the channel density can be multiplied without needing to increase the sampling period. Moreover, despite the fact that the grating is chirped, operating under the spectral Talbot regime ensures that the resultant in-band group delay characteristics are similar to those of a sampled uniform period FBG.  相似文献   

14.
A simple and fast numerical procedure is presented for designing spatially symmetric Bragg gratings with no need for iteratively solving the coupled mode equations. Using a unique relation between the phase and the amplitude of the reflection spectra valid for spatially symmetric gratings, the grating spectra are suitably optimized to fit given specifications. At the end of the design process an inverse-scattering algorithm determines the spatial structure of the corresponding Bragg grating. This method is particularly useful for the design of add/drop multiplexers, where symmetry can be a crucial prerequisite.  相似文献   

15.
《半导体光子学与技术》2010,(4):146-149,166
In this paper, the reflective spectra of a refraction index sensor were analyzed based on fiber grating F-P cavity. The sensor was constituted by two identical fiber gratings. Compared with the refraction index sensor using one fiber grating, the fiber grating F-P cavity sensor has narrower resonant peak and it can be used for more accurate measurement. The resonant peaks in the reflective spectra of the sensor are changed with small changes of the refraction index of the measured chemical liquids or cell samples. So it has potential applications in biology and chemistry.  相似文献   

16.
蔡连峰  余重秀  游澜 《激光杂志》2000,21(4):31-31,33
本文研究了以准连续均匀光栅代替线性啁啾光栅时的接头影响,利用耦合模理论和傅立叶频谱分析对接头的数目,大小及其影响进行了理论研究和数值模拟计算,并给出了接头和对其光谱特性影响的分析,计算结果。  相似文献   

17.
用遗传算法从时延特性重构光纤光栅参数   总被引:2,自引:1,他引:2  
提出了采用遗传算法(GA)结合传输矩阵法从需要的时延特性对光纤光栅进行参数重构的方法。该方法以时延为目标函数,由光纤光栅参数,包括光栅长度、折射率调制、光栅周期和光栅啁啾,组成种群中的待优化的个体,经过若干代遗传得到最优结果。用实值编码遗传算法实现了对均匀光纤光栅、啁啾光纤光栅和切趾啁啾光纤光栅参数的重构。数值仿真结果表明该方法对光纤光栅的时延特性参数重构十分有效。由斜率为100ps/nm,最大时延为300ps,中心波长为1555.2nm的理想线性时延特性重构出切趾啁啾光纤光栅的参数。此方法可以有效地从时延信息中提取光纤光栅参数,能够应用在利用光纤光栅时延特性的光控相控阵天线设计中。  相似文献   

18.
本文应用微电子制板技术、电子束扫描曝光和离子刻蚀技术研制成功微米、亚微米级宽度的矩形光栅结构,并对其进行了衍射特性的研究。实验测试数据表明了当光栅的周期接近使用的照明光的波长时,具有明显的矢时衍射特性。  相似文献   

19.
提出了一种基于光纤马赫 曾德尔干涉仪和取样光纤光栅的新型全光纤梳状滤波器。通过对器件的工作原理的理论分析 ,发现耦合器的分束比、取样光纤光栅的光谱特性和干涉臂长差是决定这种全光纤梳状滤波器性能的三个主要因素。并对器件性能进行了模拟计算。实验上获得了信道间隔为 1 0 0GHz的初步实验结果。  相似文献   

20.
A comb optical filter based on the spectral Talbot effect in uniform low reflecting fibre Bragg gratings is numerically and experimentally demonstrated, relaxing the need for any chirp or equivalent phase shifts between the gratings. It can be understood by the analogy between the compression and rate multiplication of phase modulated pulse trains and sampled fibre Bragg grating spectrum formation  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号