首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
射频模拟预失真器的研究与设计   总被引:1,自引:0,他引:1  
利用小信号BJT放大器的非线性特性设计了一个有源模拟预失真器.通过调整小信号放大器的偏置状态和对失真信号的提取控制,使功放的三阶互调失真得到了明显的改善.双音实测数据表明,该预失真器使一个GSM基站功放在5 dB功率回退点附近的三阶互调失真改善了18 dB左右,与传统的射频预失真器相比,该预失真器对功放三阶互调失真的改善度提高了10 dB左右.  相似文献   

2.
应用Matlab仿真平台对RF功率放大器的互调失真(inter-modulation—IMD)进行了分析。结果表明:在输入信号峰值或峰值功率不变时,可以用输入为两个或三个正弦信号情况下的互调失真指标来估计输入为宽频带、高密度信号情况下的互调失真指标;通过降低输入功放信号的峰值功率可以降低互调失真分量的相对幅度。  相似文献   

3.
一种RF模拟预失真放大器的实现   总被引:4,自引:0,他引:4  
刘辉  官伯然 《微波学报》2005,21(6):50-53
预失真线性化技术理论上是最简单的 RF 功率放大器线性化技术。本文利用场效应管偏置于可变电阻区时的栅压控制变阻特性构成模拟射频预失真器,在对放大器线性化的同时还可提供一定的增益。为了验证电路的有效性,分别使用双音信号和 W-CDMA 信号进行测试,结果表明3阶互调改善9dB,邻道功率比(ACPR)改善 5dB。  相似文献   

4.
在现如今社会中,无线通信技术正在快速发展及完善,人们在实际应用中对于无线通信技术的功率及利用率也提出了更加严苛的要求.所以,高效率射频功能放大器等等技术开始逐渐被人们应用,但是这个技术在实际应用过程中,会经常出现互调失真的问题,对于信号通道进行干扰.所以,射频功率放大器在实际应用过程中,应该提高对其线性技术的有关研究,进而保证通信质量.  相似文献   

5.
移动通信直放站互调干扰的消除方法   总被引:2,自引:0,他引:2  
移动通信直放站广泛应用于移动通信网络中,直放站在对射频信号进行放大的同时,也会产生互调信号,互调信号如果过大将会对通信网络产生严重干扰,降低通信网络的质量.直放站的互调信号主要是由于直放站射频功率放大器的非线性特性产生的,要消除直放站的互调信号就要改善直放站射频功率放大器的非线性.文中首先阐述了直放站互调信号对移动通信网络的影响,然后分析了直放站射频功率放大器互调信号产生的原因,最后介绍了3种改善射频功率放大器线性的方法:功率回退法、预失真法、前馈法.  相似文献   

6.
在多模光纤线路上传输多路射频模拟信号会带来谐波失真和互调失真.文章通过推导多模光纤线路的谐波失真和互调失真表达式,分析了影响组合二阶失真的因素,进而得到接收功率的频谱特性.结果表明:在中短距离传输的多模光纤线路上,如果组合二阶失真的值小于-50 dBc,可以采用副载波复用技术传输多路射频信号.  相似文献   

7.
自适应前馈射频功率放大器设计   总被引:2,自引:2,他引:0  
在高功率射频放大器设计时,通常采用前馈技术来改善宽带信号的线性度。本文基于普通的前馈系统。提出了一种新的自适应前馈线性化技术,并结合信号包络检测技术进行带外信号调节。同时,还利用该技术在计算机仿真系统上设计了一个射频功率放大器的功放输出级,通过对仿真结果的比较,发现他能显著改善IMD性能。  相似文献   

8.
本文简要讨论了0FDM系统中的非线性失真问题,其中包括IFFT处理产生的信号峰值功率过大和射频RF的互调失真,然后介绍了一种用以减少系统非线性失真的预失真处理技术,以及在FPGA上实现的简便算法、结构和实现方法.  相似文献   

9.
有线电视等多频道信号传送系统会因传送用装置中所用激光二极管和放大器的非线性而产生互调失真。而至今人们还不明了这种互调失真对数字调制信号的传送特性所产生的影响。为了明确传送系统中所产生的干扰波(互调失真+热噪声)与误码率(BER)特性的因果关系。本报告中进行了干扰波振幅分布对数字调制信号干扰特性的测定。进一步进行了干扰波振幅分布的计算机模拟,其模拟结果与测定结果非常一致。由此说明以下3点:(1)由于包含互调失真在内的干扰波的振幅分布在某些范围内不是正态分布,因此其对于BER的影响不能仅以干扰波功率之总和进行评价。(2)干扰波的振幅分布除了与干扰波功率有关,还会因互调失真的类别(2次失真,3次失真)、失真发生源的波数、C/N而变化。(3)根据干扰波振幅分布的测定结果可以推定数字调制信号的BER。  相似文献   

10.
封丽梅  贾建华 《今日电子》2004,3(12):42-42,61
研究了一种新的预失真技术,该技术从射频输入信号中检测出低频偶次项,再将其与射频输入信号混烦产生IMD3和IMD5,并且对IMD3和IMD5实现了分别控制。将该线性化技术应用于CDMA直放站5W射频功率放大器,可使输出信号的三阶和五阶互调失真分别改善17dBc和15dBc。  相似文献   

11.
王宇晨  刘训春  郝明丽  黄清华   《电子器件》2006,29(4):1172-1174
对于宽带功率放大器,有些低频端的谐波正好在工作频带内,因此谐波失真是衡量宽带功率放大器的一个重要指标。作者提出了一种降低宽带射频大功率放大器谐波失真的有效方法,即通过调整负载电感值和直流工作点使功率管负载达到最佳。利用该方法,将文中提及的功率放大器的谐波失真从-11dBc降低到了-24dBc以下。  相似文献   

12.
李伟  孟进  葛松虎  何方敏  李毅 《电子学报》2018,46(6):1357-1364
针对宽带功放行为建模和畸变补偿问题,提出了一种新的权重双盒模型.该模型采用无记忆子模型和记忆子模型权重级联的方法分别对宽带功放的静态非线性和动态非线性进行级联建模.首先,利用无记忆子模型对输入信号幅值进行压缩,降低静态畸变部分模型的拟合误差,并在子模型输出端进行解权值,保证功放的饱和驱动特性;接着,构建权重记忆子模型,利用信号幅值相关的权值函数动态的调整高低功率动态畸变子模型的权重比例.实验结果表明,在不同信号驱动情况下,本文方法在降低计算复杂度的同时,保持了更好的建模精度和畸变补偿能力.  相似文献   

13.
A novel linearization scheme utilizing injection of distortion signal at the input of amplifier is described. Harmonic and baseband signal generated by predistortion circuits is fed to the input of the main amplifier and by controlling the power level of the harmonic and baseband signal properly, mixing products can be made to cancel out with the FET inherent distortion signals. Unlike many other techniques, no precise phase adjustment is required for the RF signal path. For verification, the two-tone performance of a constructed linearized amplifier is measured and a reduction of the third-order IMD power level of about 27 dB is observed  相似文献   

14.
Polar modulation of a switching RF amplifier is an excellent candidate to combine both linearity, efficiency and CMOS integration for RF power amplifiers used in mobile and wireless communication systems. In this paper, the different sources of distortion associated with polar modulation are discussed and verified by measurement results. A fully integrated linearized CMOS RF Power Amplifier for GSM–EDGE, realized in a 0.18 μm CMOS technology, is used as a benchmark to validate the presented theory. It is demonstrated how the combination of a differential delay between the amplitude signal and the phase signal, together with the AM–PM distortion of the Class E amplifier, generates an asymmetry in the output spectrum. The effect of low-pass filtering of the envelope signal is investigated and the degradation on the linearity with and without delay adjustment is given.  相似文献   

15.
Adaptive bias techniques based on envelope signal power detection have been proposed for linearity enhancement and dc current reduction in RF amplifiers. Experimental results show an improvement in amplifier linearity, although asymmetric intermodulation distortion (IMD) was observed. This work rigorously studies the effects of the envelope signal injection on amplifier distortion using the Volterra series formulations. The results intuitively explain the spectral regrowth asymmetry, and point to a design technique in which third-order IMD can be optimally cancelled. The theory was verified through comparison to measurement and simulation results.  相似文献   

16.
预失真技术是功率放大器线性化的主要技术之一。分析了传统预失真器不能消除其输出端所产生双音基频分量的特点,提出一种新的预失真器,并利用它改善射频功率放大器的非线性失真。仿真结果表明,该方法可以明显改善射频功率放大器的三阶交调非线性失真。  相似文献   

17.
A miniaturized RF predistortion linearizer for a GaAs field-effect transistor power amplifier applicable to 256 quadrature-amplitude modulation (QAM) digital microwave systems is presented. This linearizer, which is based upon the cuber linearizer technique, utilizes circulators and a pair of diodes in the distortion generator to obtain high signal component isolation, and in the variable phase shifter to compensate for temperature variations. This allows miniaturization and easy adjustment of the circuit. Results show that a distortion reduction of more than 10 dB is obtained over a 300 MHz bandwidth. It was verified that distortion reduction can be achieved over a temperature range from 0 to 50°C. The fundamental characteristics of the linearizer and its effect on the 256-QAM signal are shown. The results show an improvement of more than 6 dB in the output back-off of the amplifier  相似文献   

18.
宽带CDMA信号激励下的功放性能分析   总被引:1,自引:0,他引:1  
王玲  马洪 《通信技术》2001,(9):19-21
根据功放的实测AM-AM、AM-PM特性,采用时域分析方法,并应用带通非线性理论和数字信号处理技术,分析了宽带数字调制信号激励下 的射频功率放大器非线性失真特性。  相似文献   

19.
A novel bias-switching scheme for a high-efficiency power amplifier is proposed. Two voltage levels for the drain bias of the RF power amplifier are generated using a combination of a class E dc/ac inverter and a class E rectifier with offset voltage. When signal peaks occur, the output of the class E dc/ac inverter is rectified and the rectified dc is added to the offset voltage by the class E rectifier, which boosts the drain bias of the RF power amplifier. Except during peaks, the drain bias of the RF power amplifier is connected to the offset voltage directly. Since the efficiency when there are no peaks is very high due to the direct connection between the offset voltage and drain bias, the overall efficiency of the RF power amplifier can be improved dramatically in high peak-to-average power ratio (PAPR) systems. The measured results show that the drain bias of the RF power amplifier is boosted up to approximately 1.8 times the offset voltage when the RF peaks generate. The overall efficiency of the proposed bias-switching amplifier is improved by 62% compared to that of the fixed bias amplifier in high PAPR systems  相似文献   

20.
基于UMC 0.18 μm RF CMOS工艺,设计并实现了一个应用于移动数字电视接收机射频前端的接收信号强度指示仪(RF RSSI).提出了一种全新的功率检测电路,相对于传统的非平衡源级耦合对整流器,具有设计简单、功耗低以及良好的宽带功率指示功能;电路中前置放大器采用恒定跨导(G<,m>)偏置技术,输出放大器为三运放...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号