共查询到20条相似文献,搜索用时 78 毫秒
1.
MEMS-IDT声表面波陀螺 总被引:4,自引:0,他引:4
声表面波陀螺的概念出现在70年代初期,发展为MEMS-IDT声表面波陀螺仅是最近几年的事情。MEMS-IDT声表面波陀螺仪是一种MEMS微机械振动陀螺,这种陀螺为单层平面结构,采用标准IC工艺就可完成加工,勿需悬浮的振动元件,有很强的抗冲击振动能力,可靠性高,可不用真空封装而保持较高的灵敏度。 相似文献
2.
3.
4.
5.
刻度因子是陀螺的重要指标,而压电晶体切向对声表面波(SAW)陀螺刻度因子有重要影响。首先以铌酸锂作为分析声波波传特性的基板材料,建立不同的波传角度和不同的切面与各种模态SAW波速的物理数学模型,接着探讨旋转扰动时二次旋转欧拉角与X切、Y切及Z切等铌酸锂晶体中的陀螺效应,分析不同切向刻度因子的变化规律。根据计算结果,铌酸锂晶体中X切Y传(XY)、128°Y切X传(128°YX)、30°ZX、ZX和150°ZX对应的声表面波陀螺刻度因子最大,同时也得出了适合应用于声表面波陀螺的相对敏感切向为声表面波波速接近于慢横波时对应的切向。 相似文献
6.
提出了一种直接序列多路正交码扩频调制解调器的声表面波(SAW)实现方案,并给出了相应的实验结果。 相似文献
7.
在传统常规冷板的理论研究基础上,为解决微小元器件散热,设计了以声表面波为辅助的微米级微通道,并利用微机电系统(MEMS)技术制作了微通道与声表面波叉指换能器集成的微型结构,对声表面波破坏液体层流结构、加速液体混合的功能进行了验证. 相似文献
8.
介绍了声表面波(SAW)器件的基本构造及工作原理,分析了声表面波进入微流体后所产生的复杂的流-固耦合效应。根据液滴随着声表面波功率的增大所出现的不同响应,将声表面波技术在微流控研究领域中的应用具体分为液滴振动及粒子聚集、液滴平移及粒子收集、微流体喷射、微流体雾化四大类。分别讨论了各类应用的工作原理及其在相关研究领域中典型的应用实例,指出了声表面波相比其他驱动方式在微流控研究领域中的优势。综合国内外研发现状,分析了目前研究过程中存在的问题,提出了声表面波驱动微流体今后的研究方向。 相似文献
9.
10.
11.
A novel fibre optic gyroscope, with a structure making use of the combination of a Sagnac interferometer with an active fibre ring-resonator, is proposed and analysed. The proposed gyroscope can be viewed as a generalised structure of the conventional Sagnac interferometric type fibre optical gyroscope. It has the advantages of both long fibre loop length and multipath interferences. By inserting a fibre amplifier in the loop to provide an optical gain of several dB, the relative maximum sensitivity is enhanced to approximately 30 times more than that of conventional Sagnac interferometric fibre optic gyroscopes.<> 相似文献
12.
Sato H. Fukuda T. Arai F. Itoigawa K. Tsukahara Y. 《Mechatronics, IEEE/ASME Transactions on》2000,5(3):266-272
Proposes application of a parallel-beam structure to the gyroscope. The parallel-beam structure has the following significant features: 1) the tip moves in parallel at the end; 2) this structure converts the small displacement into a large concentrated strain; 3) even though some units are piled up, each unit does not interfere with another; and 4) the lateral rigidity is high. We analyzed these basic features by finite-element method analysis. We have proposed the parallel-beam sensor/actuator unit using this structure, and a new gyroscope. We show two methods to improve its performance; these are resonant frequency control and mechanical coupling suppression. It is concluded that the proposed structure is suited to the gyroscope 相似文献
13.
液悬浮转子式微机械陀螺的高精度、双轴角速度和二轴加速度测量特性,相比传统陀螺有着独特的优势,在军事和民用领域均有一定应用,本文基于实现对液悬浮转子式微机械陀螺结构优化的目的,探求其磁场力随着结构的变化的规律,对该类机械陀螺结构进行建模,并对其磁场力进行数值仿真处理。结果表明,随着半径从7 mm增加至11 mm,陀螺受力及对应力矩呈指数增长。 相似文献
14.
15.
16.
17.
18.
19.
基于DSP和CPLD的光纤陀螺信号采集系统设计 总被引:1,自引:1,他引:0
随着光纤陀螺在空空导弹中的广泛应用,为了对其特性进行深入研究,设计了一种光纤陀螺信号采集系统,硬件结构采用了DSP+CPLD的方式,控制AD芯片完成多路光纤陀螺数据的采集。为了降低干扰对采集精度的影响,在硬件以及软件方面进行了抗干扰设计。通过对该系统的测试验证,性能指标满足使用要求。本系统设计新颖、实用,操作简单快捷。 相似文献