Thermoelectric Properties of Mo<Subscript>3</Subscript>Sb<Subscript>5.4</Subscript>Te<Subscript>1.6</Subscript> and Ni<Subscript>0.06</Subscript>Mo<Subscript>3</Subscript>Sb<Subscript>5.4</Subscript>Te<Subscript>1.6</Subscript>

Mo₃Sb₇, crystallizing in the Ir₃Ge₇ type structure, has poor thermoelectric (TE) properties due to its metallic behavior. However, by a partial Sb-Te exchange, it becomes semiconducting without noticeable structure changes and so achieves a significant enhancement in the thermopower with the composition of Mo₃Sb₅Te₂. Meanwhile, large cubic voids in the Mo₃Sb₅Te₂ crystal structure provide the possibility of filling the voids with small cations to decrease the thermal conductivity by the so-called rattling effect. As part of the effort to verify this idea, we report herein the growth as well as measurements of the thermal and electrical transport properties of Mo₃Sb_5.4Te_1.6 and Ni_0.06Mo₃Sb_5.4Te_1.6.     

Low-Temperature Transport Properties of Sn<Subscript>24</Subscript>P<Subscript>19.3</Subscript>Br<Subscript>8</Subscript> and Sn<Subscript>17</Subscript>Zn<Subscript>7</Subscript>P<Subscript>22</Subscript>Br<Subscript>8</Subscript>

We report on temperature-dependent thermal conductivity, resistivity, and Seebeck coefficient of two polycrystalline Br-containing Sn-clathrate compounds with the type I crystal structure. Interstitial Br atoms reside inside the polyhedral cavities formed by the framework, resulting in hole conduction. The framework bonding directly influences the transport properties of these two compositions. The transport properties of these two clathrates are compared with those of other Sn-clathrates. We also discuss our results in terms of the potential for thermoelectric applications.     

Microstructures and Thermoelectric Properties of an Annealed Ti<Subscript>0.5</Subscript>(Hf<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>)<Subscript>0.5</Subscript>NiSn<Subscript>0.998</Subscript>Sb<Subscript>0.002</Subscript> Ribbon

The thermoelectric half-Heusler compound Ti_0.5(Hf_0.5Zr_0.5)_0.5NiSn_0.998Sb_0.002 was fabricated by spin-casting and subsequent annealing. ZT at room temperature increased with annealing time through an increase in absolute Seebeck coefficients despite a decrease in electrical conductivity. ZT reached 0.10 after annealing at 1050 K for 48 h. In powder x-ray diffraction analysis, each half-Heusler peak was accompanied by a bump at the high-angle side, corresponding to a minor Ti-rich half-Heusler phase. The quantity and Ti composition of the minor phase increased with annealing time, although those of the major half-Heusler phase were almost constant. In transmission electron microscopic analysis, granular domains, several nanometers in size, with atomic ordering or disordering were observed. Thermoelectric properties were␣improved by annealing through the growth of heterogeneous microstructures of the Ti-rich and Ti-poor half-Heusler grains and of the granular domains.     

Conduction Mechanisms in Multiferroic Multilayer BaTiO<Subscript>3</Subscript>/NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/BaTiO<Subscript>3</Subscript> Memristors

Memristive devices and materials are extensively studied as they offer diverse properties and applications in digital, analog and bio-inspired circuits. In this paper, we present an important class of memristors, multiferroic memristors, which are composed of multiferroic multilayer BaTiO₃/NiFe₂O₄/BaTiO₃ thin films, fabricated by a spin-coating deposition technique on platinized Si wafers. This cost-effective device shows symmetric and reproducible current–voltage characteristics for the actuating voltage amplitude of ±10 V. The origin of the conduction mechanism was investigated by measuring the electrical response in different voltage and temperature conditions. The results indicate the existence of two mechanisms: thermionic emission and Fowler–Nordheim tunnelling, which alternate with actuating voltage amplitude and operating temperature.     

Temperature dependence of the band gap of the single-crystal compounds In<Subscript>2</Subscript>S<Subscript>3</Subscript> and AgIn<Subscript>5</Subscript>S<Subscript>8</Subscript>

For the single-crystal compounds In₂S₃ and AgIn₅S₈ produced by chemical gas-transport reactions and the Bridgman method (vertical version), the transmission spectra in the region of the fundamental absorption edge are studied in the temperature range from 20 to 300 K. From the recorded spectra, the band gaps of the In₂S₃ and AgIn₅S₈ single crystals are determined and the temperature dependences of the band gaps are constructed. It is established that, as the temperature is lowered, the band gap increases for both of the compounds. Calculation of the temperature dependences is performed. It is shown that the calculated and experimental values are in agreement with each other.     

Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> Superlattices Grown by Nanoalloying

In this work, Bi₂Te₃-Sb₂Te₃ superlattices were prepared by the nanoalloying approach. Very thin layers of Bi, Sb, and Te were deposited on cold substrates, rebuilding the crystal structure of V₂VI₃ compounds. Nanoalloyed super- lattices consisting of alternating Bi₂Te₃ and Sb₂Te₃ layers were grown with a thickness of 9 nm for the individual layers. The as-grown layers were annealed under different conditions to optimize the thermoelectric parameters. The obtained layers were investigated in their as-grown and annealed states using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive x-ray (EDX) spectroscopy, transmission electron microscopy (TEM), and electrical measurements. A lower limit of the elemental layer thickness was found to have c-orientation. Pure nanoalloyed Sb₂Te₃ layers were p-type as expected; however, it was impossible to synthesize p-type Bi₂Te₃ layers. Hence the Bi₂Te₃-Sb₂Te₃ superlattices consisting of alternating n- and p-type layers showed poor thermoelectric properties.     

Thermoelectric Properties of the Clathrate I Ba<Subscript>8</Subscript>Ge<Subscript>43</Subscript>□<Subscript>3</Subscript>

The clathrate I Ba₈Ge₄₃□₃ [space group Ia[`3]d Ia\bar{3}d , no. 230, a = 21.307(1) ?] has been synthesized as a single phase and characterized by x-ray powder diffraction and metallographic analysis. Electrical and thermal transport measurements have been performed in the temperature range of 5 K to 673 K. Ba₈Ge₄₃□₃ displays the electrical resistivity of a poor metal at low temperatures, with semiconducting-like behavior appearing above 300 K.     

Thermoelectric Properties of Zr<Subscript>3</Subscript>Mn<Subscript>4</Subscript>Si<Subscript>6</Subscript> and TiMnSi<Subscript>2</Subscript>

The Seebeck coefficient, electrical resistivity, and thermal conductivity of Zr₃Mn₄Si₆ and TiMnSi₂ were studied. The crystal lattices of these compounds contain relatively large open spaces, and, therefore, they have fairly low thermal conductivities (8.26 Wm⁻¹ K⁻¹ and 6.63 Wm⁻¹ K⁻¹, respectively) at room temperature. Their dimensionless figures of merit ZT were found to be 1.92 × 10⁻³ (at 1200 K) and 2.76 × 10⁻³ (at 900 K), respectively. The good electrical conductivities and low Seebeck coefficients might possibly be due to the fact that the distance between silicon atoms in these compounds is shorter than that in pure semiconductive silicon.     

Magnetic susceptibility of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> alloys

The magnetic susceptibility of Czochralski-grown single crystals of Bi₂Te₃-Sb₂Te₃ alloys containing 0, 10, 25, 40, 50, 60, 65, 70, 80, 90, 99.5, or 100 mol % Sb₂Te₃ has been investigated. The magnetic susceptibility of these crystals was determined at the temperature T = 291 K and the magnetic field H oriented parallel (χ_‖) and perpendicularly (χ_⊥) to the trigonal crystallographic axis C ₃. A complicated concentration dependence of the anisotropy of magnetic susceptibility χ_‖/χ_⊥ has been revealed. The crystals with the free carrier concentration p ≈ 5 × 10¹⁹ cm^?3 do not exhibit anisotropy of magnetic susceptibility. The transition to the isotropic magnetic state occurs for the compositions characterized by a significantly increased (from 200 to 300 meV) optical bandgap.     

Electronic structure of single-layer superlattices (GeC)<Subscript>1</Subscript>(SiC)<Subscript>1</Subscript>, (SnC)<Subscript>1</Subscript>(SiC)<Subscript>1</Subscript>, and (SnC)<Subscript>1</Subscript>(GeC)<Subscript>1</Subscript>

The crystal and electronic structures of GeC, SiC, and SnC crystals and superlattices based on them, GeC/SiC, SnC/SiC, and SnC/GeC, are modeled within density functional theory. The equilibrium lattice constants are obtained, the band spectra and densities of states are calculated, and the specific features of the formation of the valence band and chemical bonding in these crystals and superlattices are studied.     

Effect of ZnO Nanoparticles on the Sintering Behavior and Physical Properties of Bi<Subscript>0.5</Subscript>(Na<Subscript>0.8</Subscript>K<Subscript>0.2</Subscript>)<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript> Lead-Free Ceramics

Sintered Bi_0.5(Na_0.8K_0.2)_0.5TiO₃ + x wt.% ZnO nanoparticle (BNKT–xZnO_n) ceramics have been fabricated by conventional annealing with the aid of ultrasound waves for preliminary milling. Because of the presence of the liquid Bi₂O₃–ZnO phase at the eutectic point of 738°C, the sintering temperature decreased from 1150°C to 1000°C, and the morphology phase boundary of BNKT–xZnO_n ceramics can be clarified by two separated peaks at (002)_T and (200)_T of 2θ in the x-ray diffraction (XRD) patterns. The improvement of ferroelectric properties has been obtained for BNZT–0.2 wt.% ZnO_n ceramics by the increase of remanent polarization up to 20.4 μC/cm² and a decrease of electric coercive field down to 14.2 kV/cm. The piezoelectric parameters of the ceramic included a piezoelectric charge constant of d ₃₁ = 78 pC/N; electromechanical coupling factors k _p = 0.31 and k _t = 0.34, larger than the values of 42 pC/N, 0.12 and 0.13, respectively, were obtained for the BNKT ceramics.     

Synthesis and Electronic Properties of the Misfit Layer Compound [(PbSe)<Subscript>1.00</Subscript>]<Subscript>1</Subscript>[MoSe<Subscript>2</Subscript>]<Subscript>1</Subscript>

An ultralow-thermal-conductivity compound with the ideal formula [(PbSe)_1.00]₁[MoSe₂]₁ has been successfully crystallized across a range of compositions. The lattice parameters varied from 1.246 nm to 1.275 nm, and the quality of the observed 00ℓ diffraction patterns varied through the composition region where the structure crystallized. Measured resistivity values ranged over an order of magnitude, from 0.03 Ω m to 0.65 Ω m, and Seebeck coefficients ranged from −181 μV K⁻¹ to 91 μV K⁻¹ in the samples after the initial annealing to form the basic structure. Annealing of samples under a controlled atmosphere of selenium resulted in low conductivities and large negative Seebeck coefficients, suggesting an n-doped semiconductor. Scanning transmission electron microscopy cross-sections confirmed the interleaving of bilayers of PbSe with Se-Mo-Se trilayers. High-angle annular dark-field images revealed an interesting volume defect, where PbSe grew through a region where a layer of MoSe₂ would be expected in the perfect structure. Further studies are required to correlate the density of these defects with the observed electrical properties.     

Thermoelectric Properties of Spark Plasma-Sintered In<Subscript>4</Subscript>Se<Subscript>3</Subscript>-In<Subscript>4</Subscript>Te<Subscript>3</Subscript>

We report the thermoelectric properties of spark plasma-sintered In₄Se₃-In₄Te₃ materials. For comparison, pure In₄Se₃ and In₄Se₃ (80 wt.%)/In₄Te₃ (20 wt.%) mixture samples were prepared. In₄Se₃ and In₄Te₃ powders were synthesized by a conventional melting process in evacuated quartz ampoules, and a spark plasma method was used for the sintering of the pure In₄Se₃ and mixture samples. Thermoelectric and structural characterizations were carried out, and the mixing effect of In₄Se₃ and In₄Te₃ on the thermoelectric properties was investigated.     

Optical Study of Filled Tetrahedral Compounds Li<Subscript>3</Subscript>AlN<Subscript>2</Subscript> and Li<Subscript>3</Subscript>GaN<Subscript>2</Subscript>

A detailed analysis of the optical properties of filled tetrahedral semiconductors Li₃AlN₂ and Li₃GaN₂ has been performed, using the full potential linearized augmented plane wave method within the density functional theory. The real and imaginary parts of the dielectric function ε(ω), the optical absorption coefficient I(ω), the reflectivity R(ω), and the electron energy loss function are calculated within the random phase approximation. The interband transitions responsible for the structures in the spectra are specified. Looking at optical matrix element, we note that the major peaks are dominated by transition from metal s, N 2p states to N 2p, Ga 3d states. The theoretical calculated optical properties and electron energy loss spectrum yield a static dielectric constant of 5.34 and a plasmon energy of 19.47 eV for Li₃GaN₂. In the Li₃AlN₂ compound, the static dielectric constant decreases to 4.75 and yields a plasmon energy of 18.5 eV. The effect of spin–orbit coupling on the optical properties is also investigated and found to be quite small, especially in the low-energy region. In order to check the reliability of our calculations, analogous results obtained for Be₃N₂ in the same structure [space group Ia3(206)] are included in this work.     

Thermoelectric power of Bi<Subscript>92</Subscript>Sb<Subscript>8</Subscript> and Bi<Subscript>85</Subscript>Sb<Subscript>15</Subscript> thin films

The results of studying the galvanomagnetic and thermoelectric properties of thin block Bi₉₂Sb₈ and Bi₈₅Sb₁₅ films on mica and polyimide substrates are presented. The method used for measuring the thermoelectric power allowed us to study the temperature dependence the thermoelectric power, without introducing additional deformations into the substrate–film system. A significant difference in the temperature dependences of the galvanomagnetic and thermoelectric properties of films on mica and polyimide is found. The free charge-carrier concentrations and mobilities in the films on mica and polyimide and levels of the chemical potential for electrons and holes are calculated within the two-band approximation. The difference in the charge-carrier parameters for films on mica and polyimide is associated with strains in the film–substrate system.     

Effect of a high electric field on the conductivity of MnGa<Subscript>2</Subscript>S<Subscript>4</Subscript>, MnIn<Subscript>2</Subscript>S<Subscript>4</Subscript>, and MnGaInS<Subscript>4</Subscript> single crystals

The results of studying the effect of a high electric field on the conductivity of MnGa₂S₄, MnIn₂S₄, and MnGaInS₄ single crystals are reported. The activation energy is determined in high and low electric fields. It is established that the decrease in the activation energy with increasing the external voltage is associated with decreasing the depth of the potential well, in which the electron is located.     

Solid-State Reaction Mechanism and Deliquescence Phenomenon of K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>Nb<Subscript>0.7</Subscript>Al<Subscript>0.3</Subscript>O<Subscript>3</Subscript> Ceramic

Development of (K,Na)NbO₃-based ceramics has attracted much attention in recent decades. In this work, K_0.5Na_0.5Nb_0.7Al_0.3O₃ ceramic was prepared using conventional solid-state processing. A deliquescence phenomenon was observed when the specimen was exposed to moist atmosphere. The reaction mechanism and cause of deliquescence were investigated using x-ray diffraction analysis, scanning electron microscopy, energy-dispersive spectrometry, electron microprobe analysis, inductively coupled plasma mass spectrometry, and thermogravimetric/differential scanning calorimetric analysis. The results revealed interactions mainly amongst the raw materials K₂CO₃, Na₂CO₃, and Nb₂O₅ as well as K₂CO₃, Na₂CO₃, and Al₂O₃, which can influence the sintering behavior of the mixture. (K,Na)NbO₃ and (K,Na)AlO₂ were present in the sintered K_0.5Na_0.5Nb_0.7Al_0.3O₃ ceramic, with the latter leading to deliquescence. During the sintering process, Al₂O₃ reacts with alkali oxides (Na₂O and K₂O), which are the decomposition products of carbonates, to form (K,Na)AlO₂. In addition, Al₂O₃ is more likely to react with K₂O compared with Na₂O.     

Nanotribological Characteristics of Cu<Subscript>6</Subscript>Sn<Subscript>5</Subscript>, Cu<Subscript>3</Subscript>Sn,and Ni<Subscript>3</Subscript>Sn<Subscript>4</Subscript> Intermetallic Compounds

Nanotribological characteristics, including the coefficient of friction, wear coefficient, and wear resistance, of Cu₆Sn₅, Cu₃Sn, and Ni₃Sn₄ intermetallic compounds developed by the annealing of Sn–Cu or Sn–Ni diffusion couples were investigated in this work. The scratch test conditions combined a constant normal load of 10 mN, 20 mN, or 30 mN and a scratch rate of 0.1 μm/s, 1 μm/s, or 10 μm/s. Experimental results indicated that, as the normal load increases, the pile-up grows taller and the scratch deepens, leading to a greater coefficient of friction and wear coefficient, and reduced wear resistance. Moreover, the scratch rate does not have a significant effect on the nanotribological characteristics except for those of Cu₆Sn₅ and Cu₃Sn under a normal load of 10 mN. Though the hardness of Cu₆Sn₅, Cu₃Sn, and Ni₃Sn₄ is similar, Ni₃Sn₄ appears to be more prone to wear damage.     

Crystallization behavior and ferroelectric properties of PbTiO<Subscript>3</Subscript>/Ba<Subscript>0.85</Subscript>Sr<Subscript>0.15</Subscript>TiO<Subscript>3</Subscript>/PbTiO<Subscript>3</Subscript> sandwich thin film on Pt/Ti/SiO<Subscript>2</Subscript>/Si substrates

A PbTiO₃/Ba_0.85Sr_0.15TiO₃/PbTiO₃ (PT/BST15/PT) sandwich thin film has been prepared on Pt/Ti/SiO₂/Si substrates by an improved sol-gel technique. It is found that such films under rapid thermal annealing at 700°C crystallize more favorably with the addition of a PbTiO₃ layer. They possess a pure, perovskite-phase structure with a random orientation. The polarization-electric field (P-E) hysteresis loop and current-voltage (I-V) characteristic curves reveal that a PT/BST15/PT film exhibits good ferroelectricity at room temperature. However, no sharp peak, only a weak maximum, is observed in the curves of the dielectric constant versus temperature. The dielectric constant, loss tangent, leakage current density at 20 kV/cm, remnant polarization, and coercive field of the PT/BST15/PT film are 438, 0.025, 1.3 × 10⁻⁶ Acm⁻², 2.46 μCcm⁻², and 41 kVcm⁻¹, respectively, at 25°C and 10 kHz. The PT/BST15/PT film is a candidate material for high sensitivity elements for uncooled, infrared, focal plane arrays (UFPAs) to be used at near ambient temperature.     

Thermal Stability of Barium and Indium Double-Filled Skutterudite Ba<Subscript>0.3</Subscript>In<Subscript>0.2</Subscript>Co<Subscript>3.95</Subscript>Ni<Subscript>0.05</Subscript>Sb<Subscript>12</Subscript> Coated by SiO<Subscript>2</Subscript> Nanoparticles

Filled skutterudite thermoelectric (TE) materials have been extensively studied to search for better TE materials in the past decade. However, there is no detailed investigation about the thermal stability of filled skutterudite TE materials. The evolution of microstructure and TE properties of nanostructured skutterudite materials fabricated with Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂/SiO₂ core–shell composite particles with 3 nm thickness shell was investigated during periodic thermal cycling from room temperature to 723 K in this work. Scanning electronic microscopy and electron probe microscopy analysis were used to investigate the microstructure and chemical composition of the nanostructured skutterudite materials. TE properties of the nanostructured skutterudite materials were measured after every 200 cycles of quenching in the temperature range from 300 K to 800 K. The results show that the microstructure and composition of Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂/SiO₂ nanostructured skutterudite materials were more stable than those of single-phase Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂ bulk materials. The evolution of TE properties indicates that the electrical and thermal conductivity decrease along with an increase in the Seebeck coefficient with increasing quenching up to 2000 cycles. As a result, the dimensionless TE figure of merit (ZT) of the nanostructured skutterudite materials remains almost constant. It can be concluded that these nanostructured skutterudite materials have good thermal stability and are suitable for use in solar power generation systems.