首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
用分子束外延 ( MBE)技术研制出了 Al Ga N/Ga N高电子迁移率晶体管 ( HEMT)材料 ,其室温迁移率为 10 35cm2 /V· s、二维电子气浓度为 1.0× 10 13 cm - 2 ;77K迁移率为 2 6 53cm2 /V· s、二维电子气浓度为 9.6× 10 12 cm- 2 。用此材料研制了栅长为 1μm、栅宽为 80μm、源 -漏间距为 4μm的 Al Ga N/Ga N HEMT,其室温最大非本征跨导为 186 m S/mm、最大漏极饱和电流密度为 92 5m A/mm、特征频率为 18.8GH z。另外 ,还研制了具有 2 0个栅指 (总栅宽为 2 0× 80μm =1.6 mm )的大尺寸器件 ,该器件的最大漏极饱和电流为 1.33A。  相似文献   

2.
RF-MBE生长AlGaN/GaN极化感应二维电子气材料   总被引:4,自引:4,他引:0  
用射频等离子体辅助分子束外延技术 (RF- MBE)在 C面蓝宝石衬底上外延了高质量的 Ga N膜以及 Al Ga N/Ga N极化感应二维电子气材料 .所外延的 Ga N膜室温背景电子浓度为 2× 10 1 7cm- 3 ,相应的电子迁移率为 177cm2 /(V· s) ;Ga N (0 0 0 2 ) X射线衍射摇摆曲线半高宽 (FWHM)为 6′;Al Ga N/Ga N极化感应二维电子气材料的室温电子迁移率为 730 cm2 /(V· s) ,相应的电子气面密度为 7.6× 10 1 2 cm- 2 ;用此二维电子气材料制作的异质结场效应晶体管 (HFET)室温跨导达 5 0 m S/mm (栅长 1μm) ,截止频率达 13GHz(栅长 0 .5 μm)  相似文献   

3.
分子束外延AlGaN/GaN异质结场效应晶体管材料   总被引:1,自引:1,他引:0  
用自组装的氨源分子束外延 (NH3-MBE)系统和射频等离子体辅助分子束外延 (PA-MBE)系统在 C面蓝宝石衬底上外延了优质 Ga N以及 Al Ga N/Ga N二维电子气材料。Ga N膜 (1 .2 μm厚 )室温电子迁移率达3 0 0 cm2 /V· s,背景电子浓度低至 2× 1 0 1 7cm- 3。双晶 X射线衍射 (0 0 0 2 )摇摆曲线半高宽为 6arcmin。 Al Ga N/Ga N二维电子气材料最高的室温和 77K二维电子气电子迁移率分别为 73 0 cm2 /V·s和 1 2 0 0 cm2 /V· s,相应的电子面密度分别是 7.6× 1 0 1 2 cm- 2和 7.1× 1 0 1 2 cm- 2 ;用所外延的 Al Ga N/Ga N二维电子气材料制备出了性能良好的 Al Ga N/Ga N HFET(异质结场效应晶体管 ) ,室温跨导为 5 0 m S/mm(栅长 1 μm) ,截止频率达 1 3 GHz(栅长 0 .5μm)。该器件在 3 0 0°C出现明显的并联电导 ,这可能是材料中的深中心在高温被激活所致  相似文献   

4.
张进城  郝跃  王冲  王峰祥 《半导体学报》2004,25(10):1281-1284
利用低压MOCVD技术在蓝宝石衬底上生长了高性能的Al Ga N/Ga N二维电子气(2 DEG)材料,室温和77K温度下的电子迁移率分别为94 6和2 5 78cm2 /(V·s) ,室温和77K温度下2 DEG面密度分别为1.3×10 1 3和1.2 7×10 1 3cm- 2 .并利用Al Ga N/Ga N二维电子气材料制造出了高性能的HEMT器件,栅长为1μm,源漏间距为4 μm,最大电流密度为4 85 m A/mm(VG=1V) ,最大非本征跨导为170 m S/mm(VG=0 V) ,截止频率和最高振荡频率分别为6 .7和2 4 GHz  相似文献   

5.
RF-MBE生长AlN/GaN超晶格结构二维电子气材料   总被引:6,自引:6,他引:0  
用射频等离子体辅助分子束外延技术( RF- MBE)在c面蓝宝石衬底上外延了高质量的Ga N膜以及Al N/Ga N超晶格结构极化感应二维电子气材料.所获得的掺Si的Ga N膜室温电子浓度为2 .2e1 8cm- 3,相应的电子迁移率为2 2 1cm2 /( V·s) ;1μm厚的Ga N外延膜的( 0 0 0 2 ) X射线衍射摇摆曲线半高宽( FWHM)为7′;极化感应产生的二维电子气室温电子迁移率达到10 86cm2 /( V·s) ,相应的二维电子气面密度为7.5e1 2 cm- 2 .  相似文献   

6.
用射频分子束外延技术研制出了室温迁移率为1035cm2/(V·s),二维电子气浓度为1.0×1013cm-2,77K迁移率为2653cm2/(V·s),二维电子气浓度为9.6×1012cm-2的AlGaN/GaN高电子迁移率晶体管材料.用此材料研制的器件(栅长为1μm,栅宽为80μm,源-漏间距为4μm)的室温非本征跨导为186mS/mm,最大漏极饱和电流密度为925mA/mm,特征频率为18.8GHz.  相似文献   

7.
GaAs基单片集成InGaP/AIGaAs/InGaAs增强/耗尽型PHEMTs   总被引:2,自引:2,他引:0  
提出了一种新结构单片集成增强/耗尽型(E/D)InGaP/AlGaAs/InGaAs赝配高电子迁移率晶体管(PHEMTs).外延层材料通过分子束外延技术生长,在室温下,其电子迁移率和二维电子气浓度分别为5410cm2/(V·s)和1.34×1012cm-2.首次提出了普通光学接触曝光分步制作增强与耗尽型的栅技术方法.研制出了单片集成E/D型PHEMTs,获得良好的直流和交流特性,最大饱和漏电流密度分别为300和340mA/mm,跨导为350和300mS/mm,阈值电压为0.2和-0.4V,增强型的fT和fmax为10.3和12.4GHz,耗尽型的fT和fmax为12.8和14.7GHz.增强/耗尽型PHEMTs的栅漏反向击穿电压都为-14V.  相似文献   

8.
用射频等离子体辅助分子束外延技术(RF-MBE)在C面蓝宝石衬底上外延了高质量的GaN膜以及AlGaN/GaN极化感应二维电子气材料.所外延的GaN膜室温背景电子浓度为2×1017cm-a,相应的电子迁移率为177cm2/(V·s);GaN(0002)X射线衍射摇摆曲线半高宽(FWHM)为6′;AlGaN/GaN极化感应二维电子气材料的室温电子迁移率为730cm2/(V·s),相应的电子气面密度为7.6×1012cm-2;用此二维电子气材料制作的异质结场效应晶体管(HFET)室温跨导达50mS/mm(栅长1μm),截止频率达13GHz(栅长0.5μm).  相似文献   

9.
用MOCVD技术在高阻6H-SiC衬底上研制出了具有高迁移率GaN沟道层的AlGaN/AlN/GaN高电子迁移率晶体管(HEMT)结构材料,其室温和80K时二维电子气迁移率分别为1944和11588cm2/(V·s),相应二维电子气浓度为1.03×1013cm-2;三晶X射线衍射和原子力显微镜分析表明该材料具有良好的晶体质量和表面形貌,10μm×10μm样品的表面粗糙度为0.27nm.用此材料研制出了栅长为0.8μm,栅宽为1.2mm的HEMT器件,最大漏极饱和电流密度和非本征跨导分别为957mA/mm和267mS/mm.  相似文献   

10.
用MOCVD技术在高阻6H-SiC衬底上研制出了具有高迁移率GaN沟道层的AlGaN/AlN/GaN高电子迁移率晶体管(HEMT)结构材料,其室温和80K时二维电子气迁移率分别为1944和11588cm2/(V·s),相应二维电子气浓度为1.03×1013cm-2;三晶X射线衍射和原子力显微镜分析表明该材料具有良好的晶体质量和表面形貌,10μm×10μm样品的表面粗糙度为0.27nm.用此材料研制出了栅长为0.8μm,栅宽为1.2mm的HEMT器件,最大漏极饱和电流密度和非本征跨导分别为957mA/mm和267mS/mm.  相似文献   

11.
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.  相似文献   

12.
This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel's.  相似文献   

13.
The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.  相似文献   

14.
Today, micro-system technology and the development of new MEMS (Micro-Electro-Mechanical Systems) are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.  相似文献   

15.
The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.  相似文献   

16.
From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.  相似文献   

17.
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.  相似文献   

18.
It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output(MIMO) communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.  相似文献   

19.
The effect of laser microbeam trapping the bioparticles has been appfied widely in the biology .However the micromechanism of the acting that realizes the laser-microbeam trapping bioparticles is still lacking. In this paper ,the act microchenism of the gradiant force of laser microbeam for the bioparticles is analysed by means of quantum theory ,The result accords with our experiment.  相似文献   

20.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号