6H-SiC高压肖特基势垒二极管

在可商业获得的 N型 6 H - Si C晶片上 ,通过化学气相淀积 ,进行同质外延生长 ,在此结构材料上 ,通过热蒸发 ,制作 Ni/6 H- Si C肖特基势垒二极管 .测量并分析了肖特基二极管的电学特性 ,结果表明 ,肖特基二极管具有较好的整流特性 :反向击穿电压约为 45 0 V,室温下 ,反向电压 VR=- 2 0 0 V时 ,反向漏电流 JL=5× 10 - 4 A· cm- 2 ;理想因子为 1.0 9,肖特基势垒高度为 1.2 4— 1.2 6 e V ,开启电压约为 0 .8V     

高压Ti／6H-SiC肖特基势垒二极管

在N型6H-SiC外延片上,通过热蒸发,制作Ti／6H-SiC肖特基势垒二极管(SBD)．通过化学气相淀积,进行同质外延生长,详细测量并分析了肖特基二极管的电学特性,该肖特基二极管具有较好的整流特性．反向击穿电压约为400V,室温下,反向电压VR＝200V时,反向漏电流JR低于1×10－4A／cm2．采用Ne离子注入形成非晶层,作为边缘终端,二极管的击穿电压增加到约为800V．     

6H-SiC高压肖特基势垒二极管

在可商业获得的N型6H-SiC晶片上,通过化学气相淀积,进行同质外延生长,在此结构材料上,通过热蒸发,制作Ni/6H-SiC肖特基势垒二极管．测量并分析了肖特基二极管的电学特性,结果表明,肖特基二极管具有较好的整流特性：反向击穿电压约为450V,室温下,反向电压VR=-200V时,反向漏电流JL=5×10-4A*cm-2;理想因子为1.09,肖特基势垒高度为1.24—1.26eV,开启电压约为0.8V．     

深槽Ni(Pt)Si/Si肖特基二极管特性研究

采用15nmNi/1.5nmPt/15nmNi/Si结构在600～850°C范围内经RTP退火的方法形成Ni(Pt)Si薄膜,其薄膜电阻低且均匀一致。比形成较低电阻率的NiSi薄膜的温度提高了150°C。在850°CRTP退火后形成的Ni(Pt)Si/Si肖特基势垒二极管I-V特性很好,其势垒高度ΦB为0.71eV,改善了肖特基二极管的稳定性。实验表明在肖特基二极管中引入深槽结构,可以大幅度地提高其反向击穿电压。在外延层浓度为5E15cm-3时,深槽器件的击穿电压可以达到80V,比保护环器件高约30V。     

采用场板和B+离子注入边缘终端技术的Ti/4H-SiC肖特基势垒二极管

采用自主外延的4H-SiC外延片,利用PECVD生长的SiO2做场板介质,B+离子注入边缘终端技术,制造了Ti/4H-SiC肖特基势垒二极管.测试结果表明,Ti/4H-SiC肖特基势垒二极管的理想因子n=1.08,势垒高度(ψe)=1.05eV,串联电阻为6.77mΩ·cm2,正向电压为4V时,电流密度达到430A/cm2.反向击穿电压大于1.1kV,室温下,反向电压为1.1kV时,反向漏电流为5.96×10-3 A/cm2.     

采用场板和B+离子注入边缘终端技术的Ti/4H-SiC肖特基势垒二极管

采用自主外延的4H-SiC外延片,利用PECVD生长的SiO2做场板介质,B 离子注入边缘终端技术,制造了Ti/4H-SiC肖特基势垒二极管.测试结果表明,Ti/4H-SiC肖特基势垒二极管的理想因子n=1.08,势垒高度(ψe)=1.05eV,串联电阻为6.77mΩ·cm2,正向电压为4V时,电流密度达到430A/cm2.反向击穿电压大于1.1kV,室温下,反向电压为1.1kV时,反向漏电流为5.96×10-3 A/cm2.     

3300V碳化硅肖特基二极管及混合功率模块研制

基于数值仿真结果,采用结势垒肖特基(JBS)结构和多重场限环终端结构实现了3 300 V/50 A 4H-SiC肖特基二极管(SBD),所用4H-SiC外延材料厚度为35 μm、n型掺杂浓度为2× 1015cm-3.二极管芯片面积为49 mm2,正向电压2.2V下电流达到50 A,比导通电阻13.7 mΩ· cm2;反偏条件下器件的雪崩击穿电压为4 600 V.基于这种3 300 V/50 A 4H-SiC肖特基二极管,研制出3 300 V/600 A混合功率模块,该模块包含24只3 300 V/50 A Si IGBT与12只3 300 V/50 A 4H-SiC肖特基二极管,SiC肖特基二极管为模块的续流二极管.模块的动态测试结果为:反向恢复峰值电流为33.75 A,反向恢复电荷为0.807 μC,反向恢复时间为41 ns.与传统的Si基IGBT模块相比,该混合功率模块显著降低了器件开关过程中的能量损耗.     

3C-SiC/Si异质结二极管的高温特性

研究了低压化学气相淀积方法制备的n- 3C- Si C/p- Si(10 0 )异质结二极管(HJD)在30 0～4 80 K高温下的电流密度-电压(J- V)特性.室温下HJD的正反向整流比(通常定义为±1V外加偏压下)最高可达1.8×10 4 ,在4 80 K时仍存在较小整流特性,整流比减小至3.1.在30 0 K温度下反向击穿电压最高可达2 2 0 V .电容-电压特性表明该Si C/Si异质结为突变结,内建电势Vbi为0 .75 V.采用了一个含多个参数的方程式对不同温度下异质结二极管的正向J-V实验曲线进行了很好的拟和与说明,并讨论了电流输运机制.该异质结构可用于制备高质量异质结器件,如宽带隙发射极Si C/Si HBT     

6H-SiC高反压台面pn结二极管

在可商业获得的单晶 6 H- Si C晶片上 ,通过化学气相淀积 ,进行同质外延生长 ;并在此 6 H - Si C结构材料上 ,利用反应离子刻蚀和接触合金化技术 ,制作台面 pn结二极管 .详细测量并分析了器件的电学特性 ,测量结果表明此 6 H - Si C二极管在室温、空气介质中 ,- 10 V时 ,漏电流密度为 2 .4× 10 - 8A/cm2 ,在反向电压低于 6 0 0 V及接近30 0℃高温下都具有良好的整流特性 .     

无坑洞n-3C-SiC/p-Si(100)的LPCVD外延生长及其异质结构特性

在MBE/CVD高真空系统上,利用低压化学气相淀积( L PCVD)方法在直径为5 0 mm的单晶Si( 10 0 )衬底上生长出了高取向无坑洞的晶态立方相碳化硅( 3 C- Si C)外延材料,利用反射高能电子衍射( RHEED)和扫描电镜( SEM)技术详细研究了Si衬底的碳化过程和碳化层的表面形貌,获得了制备无坑洞3 C- Si C/Si的优化碳化条件,采用霍尔( Hall)测试等技术研究了外延材料的电学特性,研究了n- 3 C- Si C/p- Si异质结的I- V、C- V特性及I- V特性对温度的依赖关系.室温下n- 3 C- Si C/p- Si异质结二极管的最大反向击穿电压达到2 2 0 V,该n- 3 C- Si C/p- Si异质结构可用于制     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

社长序言（英文）

正Happy New Year!As we step into a new year,we take a look back at the key feature topics covered in China Communications over the past 12 months and set out our expecta-     

Call for Papers

正Introduction Jointly sponsored by the China Institute of Communications(CIC)and the IEEE Communications Society(IEEE ComSoc)since the year 2013,China Communications,currently,is aiming to gradually realise the transition from journal to magazine content and style.     

INTEGRATION OF OPTICAL AND WIRELESS NETWORKS

正For a long time,optical and wireless systems/net-works are developed in separate communities witha few attempts for in-depth convergence.In fact,it prom-ises many advantages to combine the optical and wire-less technologies in the levels of systems and networks.Recently,both academia and industry have made manyefforts to enter a new phase of development to take op-tical and wireless systems as fully integrated networks.To provide high bandwidth and reliable service for bothfixed and mobile users,a well-designed network must     

Call for Papers—Feature Topic,Vol.12,No.3,2015

正Smart Grid Communications The electric power industry is undergoing profound changes as the industry aims to capture the promise of a smart grid for a sustainable energy future.Enabled by the advanced sensing devices such as Phasor Measurement Units(PMUs),increasingly powerful