共查询到20条相似文献,搜索用时 218 毫秒
1.
一种基于小波变换的多分辨率门限选取方法 总被引:4,自引:0,他引:4
本文描 一种亲的门限选择方法,它基于小流变换多尺度方法分析图像直方图的信息,通过对小波变换后直方图零交叉点检测,得到一序列门限,用于描述图像的边缘特征,整个方法采用一种由粗到细引导的多分辨率门限结构。 相似文献
2.
反对称双正交小波应用于多尺度边缘提取的研究 总被引:18,自引:1,他引:17
本文对反对称双正交小波所具有的多尺度边缘提取能力进行了理论分析,提出了一种反对称双正交小波变换域内的多尺度边缘提取算法,并通过实验进行了验证。该结果为在基于小波变换的压缩数据域内利用边缘信息实现图像检索提供了依据。 相似文献
3.
4.
5.
针对目前板带钢表面缺陷在线检测过程中无法准确地检测出所有缺陷边缘问题,根据带钢缺陷的特点,分析了结构元素的选取,提出了一种将多尺度形态学和多结构元素有机结合的边缘检测方法。该方法首先进行多尺度形态学滤波降噪,分别求取0°结构元素、45°结构元素、90°结构元素和135°结构元素带钢缺陷图像边缘;其次通过一定的运算组合,提取多结构边缘;最后对得到的带钢缺陷图像的边缘作二值化处理,再细化边缘得到缺陷图像边缘的最终结果。实验结果表明,该方法较好地解决了边缘检测精度与抗噪性能之间的协调问题,实现了在多个尺度上提取板带钢表面缺陷的边缘。同时能够较好地保留图像中缺陷的边缘细节信息,为带钢表面缺陷在线检测系统中自动分割、缺陷识别等后续处理奠定了基础。 相似文献
6.
一种基于形态学的多结构元素多尺度图像边缘检测方法 总被引:1,自引:0,他引:1
提出了一种基于数学形态学算子的多结构元素多尺度边缘检测方法,首先构造6种具有代表性的结构元素,用改进的形态学边缘检测算子对灰度图像进行边缘检测,然后改变结构元素的尺寸大小得到多尺度下的边缘图像,根据不同尺度抗噪性能不同来确定权值,将不同尺度下的边缘图像合成,得到在噪声存在条件下较为理想的图像边缘,实验结果表明,与传统边缘检测算法相比,该算法在保持图像边缘清晰的同时,有很强的去除噪声能力,具有一定的实用性和可行性. 相似文献
7.
提出了一种有效的用子波变换提取边缘及去噪的方法,该方法通过提取子波变换局域模最大值来提取图像边缘,并利用多尺度子波变换模值信息和角度信息去除噪声.由于该方法克服了以往使用单个尺度提取边缘的局限性,结合了子波变换多尺度的优点,因此能获得既有高信噪比,又有高定位精度的边缘检测结果. 相似文献
8.
9.
基于多尺度边缘响应函数的自适应阈值边缘检测算法 总被引:2,自引:0,他引:2
该文提出了一种基于多尺度边缘响应函数的自适应阈值边缘检测算法。首先分析二进小波变换,根据边缘和噪声随尺度变化的不同特性,设计了多尺度边缘响应函数(MERF)。通过MERF中的乘积放大作用,增大了边缘响应的幅度,同时也抑制了噪声产生的伪边缘。然后利用小波变换多尺度之间的联合分布关系,计算自适应阈值,检测MERF的梯度模值形成多尺度边缘。该算法直接在小波特征上进行多尺度合成,避免了多个边缘图合成过程的病态问题。实验表明,与LOG,Canny以及Mallat多尺度小波检测方法相比,该算法在检测和定位之间能够达到更好的平衡,既能够实现小尺度下的精确定位,也可以保留大尺度下对噪声的抑制作用。 相似文献
10.
11.
12.
主要研究大鱼际掌纹图像边缘提取算法。介绍几种经典的边缘检测算子以及Hough变换方法,重点讨论了小波模极大值多尺度边缘检测方法。构造了高斯多尺度边缘检测算子,根据噪声和图像边缘的小波变换模值跨尺度传递的不同特征,研究小波模极大值多尺度边缘检测方法,对大鱼际掌纹图像进行边缘提取。实验结果表明该方法检测到的边缘细节丰富,定位较准确,有效降低了噪声,不足之处是连续性较差。 相似文献
13.
随着社会的快速发展,图像边缘检测的方法也逐步的多样化,为了能够全面提升其图像边缘检测的效率,需要对整体的检测方法进行全面的创新.但在实际的检测过程中,其检测环境还相对复杂,导致边缘检测的难度相对较大.所以,对检测法进行优化十分关键.本文主要针对图像边缘检测法进行比较分析.并提出了相应的优化措施. 相似文献
14.
15.
Hou-Chun Ting Hsueh-Ming Hang 《Journal of Visual Communication and Image Representation》1997,8(4):338-355
This paper presents a novel edge preserving interpolation method for digital images. This new method reduces drastically the blurring and jaggy artifacts at the high-contrast edges, which are generally found in the interpolated images using conventional methods. This high performance is achieved by two proposed operations: a fuzzy-inference based edge preserving interpolator and a highly oblique edge compensation scheme developed based on an edge orientation detector. The former synthesizes the interpolated pixels to match the image local characteristics. Hence, edge sharpness can be retained. However, due to the small footage of the fuzzy interpolation method, it cannot avoid edge jaggedness along the highly oblique edges that have very sharp angles against one of the coordinates. Therefore, a segment matching technique is developed to identify precisely the orientation of the highly oblique edges. Combining these two techniques, we improve significantly the visual quality of the interpolated images, particularly at the high-contrast edges. Both the synthesized images (such as letters) and the natural scenes (captured by camera) have been tested and the results are very promising. 相似文献
16.
17.
《Communications Letters, IEEE》2009,13(1):49-51
We propose an admission control method at edge nodes. This method aims at maximizing network throughput and calculates an input traffic limitation ratio at each edge node, which is used for admission control. Since the proposed method only uses input traffic volume information, it does not need to take into account the traffic matrix among edge nodes. Therefore, this method can be easily applied to actual networks in a practical way. We formulate a linear programming (LP) to solve the optimization problem of the input traffic limitation ratio of each node for any traffic matrix. This problem cannot be solved as it is, so we modify the LP problem by applying a duality theorem in the field of LP problems. 相似文献
18.
An ideal image edge detection scheme 总被引:1,自引:0,他引:1
This paper introduces a scale-invariant and contrast-invariant multi-scale differential edge detector. The method is a direct consequence of two key discoveries: (1) a precise scale normalization method and (2) a formula to verify scale-invariant detectors. The new scale normalization method provides differential operators with respect to scale, among them the scale-invariant edge detectors. To investigate these differential detectors quantitatively, mathematical functions were used to represent the edges and to solve for the parameters, including position, width, contrast, offset, and orientation, in closed form. Noise is filtered as a low-contrast feature. The method has been tested with various kinds of synthesized edge functions and can extract edge features accurately. It is suitable for real-world images of several kinds of degradation. 相似文献
19.
20.
基于提升小波的自适应阈值边缘检测新算法 总被引:1,自引:0,他引:1
针对传统的单一边缘检测算法抗噪能力差、边缘不连续等缺点,本文提出采用两种算法相结合的方式来进行边缘检测。首先,对原始图像进行多层小波分解;对分解后的图像低频部分用提出的改进提升算法进行边缘检测,对高频部分用小波变换的局部模极大值算法检测边缘;通过将各层边缘信息按一定的融合规则融合起来得到一个组合边缘,最后细化图像边缘。实验证明,这种方法相对于传统小波分析有着计算量小,计算速度快和要求存储空间小等诸多优势,同时,也能做到不丢失图像信息,保证了边缘的连续性和封闭性,检测效果较好。 相似文献