一种新型小型化窄带腔体滤波器的设计

该文设计实现了一种高抑制、小型化结构的窄带腔体滤波器,利用加载电容的原理,在盖板一侧添加矩形金属柱,增大了耦合电容,缩小了相邻谐振腔之间的距离,从而实现了滤波器的小型化。通过CST仿真,设计了中心频率为7.325 GHz、带宽为0.25 GHz的窄带腔体滤波器。最终经过实物测试表明,频带内驻波比良好,带外抑制高,实物体积减小。     

一种宽阻带窄带腔体滤波器的设计

该文介绍了一种窄带带通腔体滤波器的原理和设计方法,通过加载电容原理,使滤波器的寄生通带远离通频带,并设计了带哑铃型横杆的谐振器结构,在谐振器连接点形成电压驻波零点,从而进一步抑制滤波器的寄生通带,实现了具有宽阻带的带通腔体滤波器。最后,利用微波仿真软件CST设计了一款中心频率为2.45 GHz,相对带宽为4.08%的窄带带通腔体滤波器。仿真结果表明,滤波器带外抑制高,阻带范围宽,通带内驻波良好,满足设计指标要求。     

同轴腔体窄带带通滤波器快速设计方法

为了满足卫星用滤波器研制周期短、可靠性高的要求,提出了一种快速设计经典同轴腔体滤波器的方法.该方法通过原型滤波器查表可以计算滤波器节数、耦合常数、群时延、单腔谐振频率、单腔Q值等初始值;通过使用三维电磁(EM)仿真软件得到单腔调谐钉长度和加载电容值的对应关系、两个腔体间耦合系数及端口抽头高度等模型SnP参数;通过电路仿真软件使用集总元件对电容加载的量值进行优化,极大地提高了仿真的速度.最后使用该协同仿真方法设计一同轴腔体滤波器,并对仿真结果进行了验证.     

新型毫米波微带带通滤波器

介绍了一种新型的加载电容型毫米波微带带通滤波器。对这种滤波器进行了分析,推导出了滤波器中所用谐振单元间的耦合系数。该滤波器通过加载电容而出现慢波效应,使得在不改变电路性能的情况下,减小了电路尺寸。同时由于电路中加载电容形成的慢波效应而出现了带阻效应,因此对谐波有很好的抑制作用。利用高频分析软件CST仿真分析并设计了这种新型的加载电容型毫米波微带带通滤波器,实验结果与设计曲线结果相符。     

高性能跳频滤波器设计

提出了一种用无源谐振腔和有源电路相结合来实现高性能跳频滤波器的方法,利用开关电容阵加载腔体实现高速宽带低损的频率跳变.重点对这种跳频滤波器的插损和功率两个指标进行分析,包括腔体无载品质因数、PIN开关的功率和插损、加载射频电容的插损.利用三维电磁仿真软件HFSS和平面电路仿真软件ADS,结合具体的技术指标要求,给出了跳...     

宽带同轴腔体滤波器的设计

首先分析了宽带滤波器的制作难点,利用同轴腔体的形式实现了一款宽带带通滤波器,并通过加载电容的原理实现了滤波器的小型化。最后通过仿真软件CST设计了中心频率4.24GHz,带宽为44.3%的宽带滤波。结果表明,滤波器实物在整个频带内电压驻波比、带外抑制良好,满足手持雷达装置使用要求。     

低频段高抗振大功率滤波器的小型化设计

该文设计了一款电容加载结构的小型化腔体滤波器。谐振器端头采用圆盘结构的电容加载,并使用四氟乙烯材料在谐振杆中间位置进行支撑加固;计算过程中,为三维电磁模型添加了集总端口,与电路模型联合仿真进行参数优化。通过三维电磁环境下的功率容量分析,该滤波器满足大功率指标要求。     

低频段腔体滤波器的小型化设计

介绍一种微波低频段腔体滤波器的设计方法。首先给出多种加载腔体的结构形式进行分析比较,并通过2个设计实例和测试结果,证明采用双同轴腔体加载形式,可以实现结构的微型化。该结构与普通的加载型腔体滤波器相比,谐振器长度可以极大缩短,腔体也能保持比较高的Q值。     

一种小型化腔体带阻滤波器的设计

腔体滤波器由于具有结构牢固,性能稳定可靠,散热性好,品质因数(Q)高,损耗小及功率容量高等特点,使其在各类微波系统中得到广泛运用。为了使某腔体带阻滤波器小型化,在保证阻带带宽大于200 MHz和阻带抑制大于30 dB的情况下,通过优化谐振腔的电容加载结构及优化谐振腔的排列方式,将滤波器的高度降低了50%,长度减小了17%,体积控制在8 mm×8 mm×25 mm。     

基于双同轴阶跃阻抗谐振器的带通腔体滤波器的设计

介绍了一种减小腔体滤波器体积的设计方法。分析了双同轴阶跃阻抗谐振器的谐振条件和未加载Q值,依据滤波器理论和运用HFSS软件设计了一个基于双同轴阶跃阻抗谐振器的带通腔体滤波器。在3.7～3.9 GHz的频带内,该滤波器插入损耗小于0.5 dB,回波损耗大于20 dB,测试与仿真结果相吻合。该滤波器具有体积小、结构简单易于加工等优点。     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

Complete approach to automatic identification and sub-pixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

社长序言（英文）

正Happy New Year!As we step into a new year,we take a look back at the key feature topics covered in China Communications over the past 12 months and set out our expecta-     

Call for Papers

正Introduction Jointly sponsored by the China Institute of Communications(CIC)and the IEEE Communications Society(IEEE ComSoc)since the year 2013,China Communications,currently,is aiming to gradually realise the transition from journal to magazine content and style.     

INTEGRATION OF OPTICAL AND WIRELESS NETWORKS

正For a long time,optical and wireless systems/net-works are developed in separate communities witha few attempts for in-depth convergence.In fact,it prom-ises many advantages to combine the optical and wire-less technologies in the levels of systems and networks.Recently,both academia and industry have made manyefforts to enter a new phase of development to take op-tical and wireless systems as fully integrated networks.To provide high bandwidth and reliable service for bothfixed and mobile users,a well-designed network must     

Call for Papers—Feature Topic,Vol.12,No.3,2015

正Smart Grid Communications The electric power industry is undergoing profound changes as the industry aims to capture the promise of a smart grid for a sustainable energy future.Enabled by the advanced sensing devices such as Phasor Measurement Units(PMUs),increasingly powerful