WCW003刷毛状异物D断调查及对策

2008年7月份，在TFT—LCD制品Array生产中，ArrayTester检查发现，DrainLayer成膜前洗净设备与DataLineOpen（D断）存在设备间的差异。经确认，此类D断存在共同特征即缺失处形状类似刷毛。文章旨在对此现象进行验证，以进行有效对策。     

基于排队论的D2D蜂窝异构网络的性能分析

本文对在蜂窝网络中的具有业务缓存功能的D2D通信进行性能分析,与满业务模型不同本文建立动态数据到达的D2D 通信模型。针对D2D用户的业务数据随机到达的特性,建立一种动态干扰下D2D用户数据发送状态的M/G/1排队模型,并考虑到来自蜂窝用户的干扰和信道衰落的影响。本文采用自适应调制编码技术将D2D的信干噪比划分区间来确定发送速率,为了分析D2D用户缓存中的数据包排队状态,本文用嵌入马氏链分析并求解它的稳态分布,由稳态分布推导得到平均吞吐量、平均时延等参数的表达式。仿真结果验证了理论分析的正确性和合理性。      

Ca10(PO4)6(OH)2纳米粉体的制备及TEM分析

采用化学沉淀法合成纳米羟基磷灰石粉体,考察了工艺参数一反应物浓度和反应温度对纳米粉体的粒度和结晶度的影响。用等离子发射光谱、红外光谱、X射线衍射和透射电镜等实验手段对粉体的粒度和表面形貌进行了表征。结果表明：反应温度是影响纳米颗粒粒度和结晶度的主要因素,通过控制反应温度可以得到不同粒度的纳米颗粒。37℃下合成的纳米颗粒尺寸接近人体骨的纳米结晶(30～40nm),75℃下合成的纳米颗粒尺寸接近牙釉质的纳米结晶(150～170nm)。醇洗可以有效地改善沉淀法合成的纳米羟基磷灰石粉体的分散性。     

基于自私行为分析的超密集D2D中继选择算法

在超密集D2D通信中,目前的中继选择方案主要假定中继设备具有主动意愿参与数据转发,但部分理性中继设备出于自身考虑,可能会存在时延或拒绝转发的自私行为,进而影响用户体验效果.从中继设备自私行为角度出发,提出了D2D通信中自私中继设备识别方法,进而提出了基于自私行为分析的超密集D2D中继选择算法.首先,定义了联合兴趣度、转...     

海外经验：积极推进业务融合与产品创新实现全业务经营

2008年我国电信重组的完成和2009年1月7日3G牌照的发放．使我国电信市场全面进入全业务经营的3G时代。如今．我国已形成了中国电信、中国移动、中国联通三家全业务运营商竞争的格局。各运营商为谋划在全业务3G时代的领先地位,采取各种策略,如中国电信是在聚焦客户信息化创新战略统领下．实施融合差异化策略．打造移动互联手机新理念：     

Phonon modes in KH2PO3-type crystals

New infrared reflectivity spectroscopic measurements for polarization of the electric field perpendicular to the ferroelectric axis of KDP in its ferroelectric phase at 7K, are presented and discussed. The optical mode parameters of modes belonging to B₁ and B₂ symmetry are deduced from the experimental infrared reflectivity, together with the fractional number of dipoles pointing in the + c direction.     

Cross polarization in dual reflector antennas--A PO and PTD analysis

A physical optics (PO) and physical theory of diffraction (PTD) analysis of symmetric and offset dual reflector antennas is performed. It is shown that in most cases PO gives sufficient accuracy, but the PTD correction can be of importance to determine the depolarization, especially if the subreflector edge taper is low.     

Low-frequency models in KH2PO4-type crystals

The phonon responses along the three crystallographic orientations of KH₂PO₄, 90% deuterated K(H_1?xD_x)₂ PO₄ and NH₄H₂PO₄, deduced from the best fit of the factorised form of the dielectric function to the infrared reflectivity spectra, are compared. Results evidence the activity of a low-frequency heavily damped extra-mode in both directions parallel and perpendicular to the c axis, due to the coupling of an internal mode with the inter-site protonic motion and external models.     

Radio resource management scheme and outage analysis for network-assisted multi-hop D2D communications

In a cellular network it's very difficult to make spectrum resource more efficiently. Device-to-Device (D2D) technology enables new service opportunities, and provides high throughput and reliable communication while reducing the base station load. For better total performance, short-range D2D links and cellular links share the same radio resource and the management of interference becomes a crucial task. Here we argue that single-hop D2D technology can be used to further improve cellular networks performance if the key D2D radio resource management algorithms are suitably extended to support multi-hop D2D communications. Aiming to establish a new paradigm for the analysis and design of multi-hop D2D communications, We propose a radio resource allocation for multi-hop D2D routes based on interference avoidance approach in LTE-A networks. On top of that, we investigate the outage probability of D2D communication. We first introduce a new definition of outage probability by considering the maximum distance to be allowable for single-hop transmission. Then we study and analyze the outage performance of a multi-hop D2D route. We derive the general closed form expression of outage probability of the multi-hop D2D routes. The results demonstrate that the D2D radio, sharing the same resources as the cellular network, provide higher capacity compared to pure cellular communication where all the data is transmitted through the base station. They also demonstrate that the new method of calculation of D2D multi hop outage probability has better performance than classical method defined in the literature.