首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 46 毫秒
1.
Freestanding carbon‐based hybrids, specifically carbon nanotube@3D graphene (CNTs@3DG) hybrid, are of great interest in electrochemical energy storage. However, the large holes (about 400 µm) in the commonly used 3D graphene foams (3DGF) constitute as high as 90% of the electrode volume, resulting in a very low loading of electroactive materials that is electrically connected to the carbon, which makes it difficult for flexible supercapacitors to achieve high gravimetric and volumetric energy density. Here, a hierarchically porous carbon hybrid is fabricated by growing 1D CNTs on 3D graphene aerogel (CNTs@3DGA) using a facile one‐step chemical vapor deposition process. In this architecture, the 3DGA with ample interconnected micrometer‐sized pores (about 5 µm) dramatically enhances mass loading of electroactive materials comparing with 3DGF. An optimized all‐solid‐state asymmetric supercapacitor (AASC) based on MnO2@CNTs@3DGA and Ppy@CNTs@3DGA electrodes exhibits high volumetric energy density of 3.85 mW h cm?3 and superior long‐term cycle stability with 84.6% retention after 20 000 cycles, which are among the best reported for AASCs with both electrodes made of pseudocapacitive electroactive materials.  相似文献   

2.
Oriented microstructures are widely found in various biological systems for multiple functions. Such anisotropic structures provide low tortuosity and sufficient surface area, desirable for the design of high‐performance energy storage devices. Despite significant efforts to develop supercapacitors with aligned morphology, challenges remain due to the predefined pore sizes, limited mechanical flexibility, and low mass loading. Herein, a wood‐inspired flexible all‐solid‐state hydrogel supercapacitor is demonstrated by morphologically tuning the aligned hydrogel matrix toward high electrode‐materials loading and high areal capacitance. The highly aligned matrix exhibits broad morphological tunability (47–12 µm), mechanical flexibility (0°–180° bending), and uniform polypyrrole loading up to 7 mm thick matrix. After being assembled into a solid‐state supercapacitor, the areal capacitance reaches 831 mF cm?2 for the 12 µm matrix, which is 259% times of the 47 µm matrix and 403% times of nonaligned matrix. The supercapacitor also exhibits a high energy density of 73.8 µWh cm?2, power density of 4960 µW cm?2, capacitance retention of 86.5% after 1000 cycles, and bending stability of 95% after 5000 cycles. The principle to structurally design the oriented matrices for high electrode material loading opens up the possibility for advanced energy storage applications.  相似文献   

3.
UiO‐66, a zirconium based metal–organic framework, is incorporated with nanosized carbon nitride nanosheets via a facile electrostatic self‐assembly method. This hybrid structure exhibits a large surface area and strong CO2 capture ability due to the introduction of UiO‐66. We demonstrate that electrons from the photoexcited carbon nitride nanosheet can transfer to UiO‐66, which can substantially suppress electron–hole pair recombination in the carbon nitride nanosheet, as well as supply long‐lived electrons for the reduction of CO2 molecules that are adsorbed in UiO‐66. As a result, the UiO‐66/carbon nitride nanosheet heterogeneous photocatalyst exhibits a much higher photocatalytic activity for the CO2 conversion than that of bare carbon nitride nanosheets. We believe this self‐assembly method can be extended to other carbon nitride nanosheet loaded materials.  相似文献   

4.
Heteroatom‐doped carbon nanomaterials with high surface area and tunable microporosity are important but they generally require difficult and multistep syntheses. Herein, a simple and straightforward strategy is introduced that involves a wrap‐bake‐sublime approach to synthesize microporosity controlled and heteroatom codoped carbon nanocages. A zinc‐containing zeolitic imidazolate framework (ZIF‐8) core is wrapped in a cross‐linked oligomer containing nitrogen and phosphorus, oligo(cyclotriphosphazene‐co‐hexahydroxytriphenylene) (OCHT). As‐synthesized core–shell ZIF‐8‐OCHT nanoparticles are baked at high temperatures to sublimate zinc through OCHT shell, resulting in a porous structure. Meanwhile, hollow cavities are introduced into N,P codoped carbon nanocages (NPCNs) via the sacrificial nature of ZIF‐8 template. The microporosity is finely tuned by controlling thickness of the OCHT shell during synthesis of the core–shell nanoparticles, since the sublimation tendency of zinc component at high temperatures depends on the thickness of OCHT shell. A systematic correlation between the electrochemical performance of NPCNs and their microporosity is confirmed. Furthermore, the electrochemical performance of the NPCNs is related to the degree of heteroatom codoping. The approach is successfully scaled‐up without compromising their electrochemical performance. Finally, a symmetric and flexible all‐solid‐state‐supercapacitor with high energy and power density, and a long‐term cycleability is demonstrated (75% capacitance retention after 20 000 cycles).  相似文献   

5.
Carbon nanoparticles (CNPs) are grown on flexible carbon fabric via a simple and low‐cost flame synthesis process. The entire struture of the carbon fabric substrate retains its high flexibility after the growth of CNPs and can even be rolled‐up and twisted to a large degree without affecting the electric characteristics. No appreciable changes in the conductance can be observed under different bending curvatures after hundreds of bending cycles. The thermal conductivity of the carbon fabric with CNPs is about 2.34 W m?1 K?1, about one order of magnitude higher than that of most polymer substrates. The field emitter fabricated using the structure has a low threshold electric field of around 2.8 V μm?1, and a high field emission current density of 108 mA cm?2, which is about two to four orders of magnitude higher than that of most polymer substrate‐based flexible CNT field emitters. These results indicate that CNPs on carbon fabric have potential applications in flexible electronics devices and displays.  相似文献   

6.
The application of conventional metal–organic frameworks (MOFs) as electrode materials in supercapacitors is largely hindered by their conventionally poor electrical conductivity. This study reports the fabrication of conductive MOF nanowire arrays (NWAs) and the application of them as the sole electrode material for solid‐state supercapacitors. By taking advantage of the nanostructure and making full use of the high porosity and excellent conductivity, the MOF NWAs in solid‐state supercapacitor show the highest areal capacitance and best rate performance of all reported MOF materials for supercapacitors, which is even comparable to most carbon materials.  相似文献   

7.
The practical application of graphene has still been hindered by high cost and scarcity in supply. It boosts great interest in seeking for low‐cost substitute of graphene for upcoming usage where extremely physical properties are not absolutely critical. The conversion of renewable biomass offers a great opportunity for sustainable and economic fabrication of 2D carbon nanostructures. However, large‐scale production of carbon nanosheets with ultrahigh aspect ratio, satisfied electronic properties, and the capability of organized assembly like graphene has been rarely reported. In this work, a facile yet efficient approach for mass production of flexible boric/nitrogen co‐doped carbon nanosheets with very thin thickness of 5–8 nm and ultrahigh aspect ratio of over 6000–10 000 is demonstrated by assembling the biomass molecule in long‐range order on 2D hard template and subsequent annealing. The advantage of these doped carbon nanosheets over conventional products lies in that they can be readily assembled to multilevel architectures such as freestanding flexible thin film and ultralight aerogels with better electrical properties, which exhibit exceptional capacitive performance for supercapacitor application. The recyclability of boric acid template further reduces the discharge of the waste and processing cost, rendering high cost‐effectiveness and environmental benignity for scalable production.  相似文献   

8.
9.
Heteroatom‐doped carbon (HDC) has attracted tremendous attention due to its promising application in energy conversion and storage. Herein, due to its abundance high rate of reproduction, the microorganism, Bacillus subtilis, is selected as a precursor. An effective ionothermal process is adopted to produce the HDCs. Using acid activation, the obtained sample exhibits excellent electrocatalytic activity, long‐term stability, and excellent resistance to crossover effects in oxygen reduction. Additionally, the base‐treated sample exhibits superior performance in capacitors to most commercially available carbon materials. Even at a high current density, a relatively high capacitance is retained, indicating a great potential for direct application in energy storage.  相似文献   

10.
Hierarchically porous composites with mesoporous carbon wrapping around the macroporous graphene aerogel can combine the advantages of both components and are expected to show excellent performance in electrochemical energy devices. However, the fabrication of such composites is challenging due to the lack of an effective strategy to control the porosity of the mesostructured carbon layers. Here an interface‐induced co‐assembly approach towards hierarchically mesoporous carbon/graphene aerogel composites, possessing interconnected macroporous graphene networks covered by highly ordered mesoporous carbon with a diameter of ≈9.6 nm, is reported. And the orientation of the mesopores (vertical or horizontal to the surface of the composites) can be tuned by the ratio of the components. As the electrodes in supercapacitors, the resulting composites demonstrate outstanding electrochemical performances. More importantly, the synthesis strategy provides an ideal platform for hierarchically porous graphene composites with potential for energy storage and conversion applications.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号