共查询到20条相似文献,搜索用时 125 毫秒
1.
空间目标激光雷达散射截面仿真分析 总被引:3,自引:1,他引:2
空间目标激光散射特性建模与仿真分析是激光主动探测系统论证设计、性能评价的前提和基础,激光雷达截面(LRCS)是目标激光散射特性的综合反映.研究了适用于激光主动探测系统的双向反射分布函数(BRDF)模型,针对空间目标不同表面材质类型提出了一种基于OpenGL的空间目标LRCS可视化计算方法,建立了由不同表面材质组成的某卫星三维模型,仿真分析了在不同姿态角和电池阵转角条件下的空间目标LRCS值.结果表明,该空间目标LRCS的变化范围为0.1~100m2.仿真结果可为空间目标激光主动探测系统设计提供参考和依据. 相似文献
2.
复杂目标的激光雷达散射截面(LRCS)一直以来是激光探测和隐身中很重要的一个参数。对于LRCS计算的理论方法已经比较成熟,但是在将目标建模、目标表面材料涂覆、且标整体LRCS计算相结合的一体化设计方面,还存在一些有待解决的问题。针对该问题,介绍了一种基于Unigraphics造型软件,结合图形电磁计算(GRECO)以及双向反射分布函数(BRDF)模型的复杂目标(涂覆)LRCS计算软件的一体化开发方法。计算实例表明,使用这种方法,程序的一体化设计效果良好,而且具有较高的计算精度和准确性。 相似文献
3.
4.
5.
太赫兹频段下目标散射特性计算需考虑目标表面的粗糙特性和目标材料参数。在对粗糙目标几何建模时,通常的精细面元剖分建模方法使得散射计算问题难以求解。提出确定性建模与统计性建模相结合的粗糙目标几何建模方法,并且基于全波法提出了一种太赫兹频段可计算任意材料、任意粗糙凸体目标散射场的计算方法。通过与通用电磁计算软件计算结果的比较验证了该方法的准确性。 相似文献
6.
研究了不同粗糙度的非均匀不稳定表面粗糙导体目标在太赫兹波段的散射特性,区别于采用经验公式的建模方法,提出把随机粗糙面的建模理念应用到太赫兹波段的非均匀不稳定表面粗糙目标的建模中,用描述随机粗糙面的均方根高度(h)和相关长度(l)两个物理量来调节目标表面的粗糙度变化.首先用高斯随机粗糙面模拟非均匀不稳定粗糙目标的表面,然后采用物理光学和等效电流相结合的方法进行仿真计算,分别对不同入射角、不同频率和不同粗糙度的不同非均匀不稳定表面粗糙导体目标,在太赫兹波段散射特性进行了分析,最后得出相关的结论. 相似文献
7.
8.
9.
大粗糙度表面激光散射特性实验研究 总被引:8,自引:1,他引:7
本文利用激光散射自动测量系统,对经喷丸处理后的钢基粗糙表面及其喷漆表面的后向激光雷达散射截面(LRCS)进行了测量。测量波长分别为λ=633nm和λ=904nm.在λ=904nm,利用粗糙面电磁散射理论的基尔霍夫方法对上述样片进行了理论计算,其中将粗糙表面视为双尺度模型,根据驻留相位法和标量近似法理论计算双尺度模型随机粗糙表面的散射强度角分布,其理论值与实验测量结果有较好的吻合。 相似文献
10.
空间目标光学散射特性建模与分析是空间光学监视系统论证设计、性能评价的前提和基础。以空间目标的可见光与激光散射特性为主要研究对象,分析了空间目标光学散射特性的基本研究内容和方法,介绍了国内外应用于卫星表面材料的比较典型的BRDF 模型,从卫星表面材料BRDF 测量与建模、目标可见光散射特性测量与仿真计算和空间目标LRCS 测量与仿真计算三个方面,介绍了国内外典型研究单位的研究成果以及下一步的研究发展方向。可为空间目标光学特性研究思路与方法提供借鉴。 相似文献
11.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献
12.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy. 相似文献
13.
This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors. 相似文献
14.
YUXiao-hua XIANGYu-qun 《半导体技术》2005,30(2):30-32,37
An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB. 相似文献
15.
The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO>6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs. 相似文献
16.
TANG Bin JIANG Xing-fang LIU Zhi-min 《光电子快报》2008,4(1):78-80
By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly. 相似文献
17.
We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network. 相似文献
18.
Tian-hua Xu Feng Tang Wen-cai Jing Hong-xia Zhang Da-gong Ji Chang-song Yu Ge Zhou Yi-mo Zhang 《光电子快报》2008,4(4):292-294
Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited. 相似文献
19.
Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources' evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping (266 nm) at power densities of 25-153 kW/cm^2. The full width half maximum (FWHM) of the lasing mode is 0.67 nm 相似文献
20.
《中国通信》2014,(9)
正Communications—VLSI Researches and industries of telecommunications have been growing rapidly in the last 20 years and will keep their high growing pace in the next decade.The involved researches and developments cover mobile communications,highway and last-mile broadband communication,domain specific communications,and emerging D2D M2M communications.Radio communication steps into its 相似文献