QoS-aware routing based on bandwidth estimation for mobile ad hoc networks

Routing protocols for mobile ad hoc networks (MANETs) have been explored extensively in recent years. Much of this work is targeted at finding a feasible route from a source to a destination without considering current network traffic or application requirements. Therefore, the network may easily become overloaded with too much traffic and the application has no way to improve its performance under a given network traffic condition. While this may be acceptable for data transfer, many real-time applications require quality-of-service (QoS) support from the network. We believe that such QoS support can be achieved by either finding a route to satisfy the application requirements or offering network feedback to the application when the requirements cannot be met. We propose a QoS-aware routing protocol that incorporates an admission control scheme and a feedback scheme to meet the QoS requirements of real-time applications. The novel part of this QoS-aware routing protocol is the use of the approximate bandwidth estimation to react to network traffic. Our approach implements these schemes by using two bandwidth estimation methods to find the residual bandwidth available at each node to support new streams. We simulate our QoS-aware routing protocol for nodes running the IEEE 802.11 medium access control. Results of our experiments show that the packet delivery ratio increases greatly, and packet delay and energy dissipation decrease significantly, while the overall end-to-end throughput is not impacted, compared with routing protocols that do not provide QoS support.     

QoS routing based on multi-class nodes for mobile ad hoc networks

In this paper, we present a new quality of service (QoS) routing protocol for mobile ad hoc networks (MANETs). Most of the existing routing protocols assume homogeneous nodes in MANETs, i.e., all nodes have the same communication capabilities and characteristics. However, in many ad hoc networks, nodes are not the same. Some nodes have longer transmission range, larger transmission bandwidth, and are more reliable and robust than other nodes. We take advantage of the non-homogeneous property to design more efficient QoS routing protocol. And node location information is used to aid routing. We also develop a new algorithm to calculate end-to-end bandwidth for a given path. Our QoS routing protocol contains end-to-end bandwidth calculation and bandwidth reservation. QoS route is discovered and setup only when it is needed. Extensive simulation studies demonstrate the good performance of the QoS routing protocol.     

A Novel Routing Protocol for Supporting QoS for Ad Hoc Mobile Wireless Networks

The main purposes of this article are to lessen the influence of the fastchanging network topology, rapidly varying bandwidth information, and the increasing size of routing tables onquality of service routing. Based on DSDV (Destination-Sequenced Distance-Vector) routing protocol formaintaining up-to-date routing information, the related research has to update routing tables when networktopology changes; moreover, the routing tables must be updated periodically even though the networktopology has not changed. To put emphasis on QoS routing, they also have to exchange routing tables by thetime of bandwidth information changes. Furthermore, the size of routing tables increases with the numberof mobile nodes; therefore, the precious wireless bandwidth is wasted on transmitting the large-scalerouting tables. In this article, we propose an on-demand-based QoS routing protocol to mitigate theseproblems and to achieve the QoS requirement. The goal of this article is to discover an optimal routewith minimum time delay for transmitting real-time data from a source node hop by hop to adestination node under some predefined constraints. Our contributions are as follows: our researchprovides a rigorous bandwidth definition and bandwidth application, a broad view of bandwidth calculationand reservation, minimizing the size of control packets and the number of control packet transmissions,and an efficient QoS routing protocol.     

Two phase load balanced routing using OSPF

The Internet traffic is growing, and its nature changes because of new applications. Multimedia applications require bandwidth reservations that were not needed initially when the file transfers dominated the Internet. P2P applications are making traffic patterns impossible to predict, and the traffic loads generated at nodes need to be routed regardless of the traffic pattern. When the guaranteed node traffic loads are known, bandwidth reservations can be made simple as will be explained in the paper. The shortest path routing (SPR) protocols used on the Internet today do not maximize the guaranteed node traffic loads, and do not provide scalable and fast bandwidth reservations. Load balancing can improve the network throughput for arbitrary traffic pattern. In this paper we analyze and implement a routing protocol that is based on load balancing and a commonly used shortest path routing protocol, and is, consequently, termed as LB-SPR. LB-SPR is optimized for an arbitrary traffic pattern, i.e. it does not assume a particular traffic matrix. Optimization assumes only the weights assigned to the network nodes according to their estimated demands. It will be shown that the optimized routing achieves the throughputs which are significantly higher than those provided by the currently used SPR protocols, such as OSPF or RIP. Importantly, LB-SPR calculates the guaranteed traffic loads and so allows fast autonomic bandwidth reservations which are the key for the successful support of triple-play applications, including video and audio applications that require high QoS. An actual modification of the TCP/IP stack that includes LBSPR is also described. Using the signaling mechanisms of the OSPF protocol, the information needed to perform the routing optimization is automatically distributed among the network nodes whenever the network topology changes. The LB-SPR implementation is validated on a sample network using a popular virtualization tool - Xen.     

RSVP: a new resource ReSerVation Protocol

A resource reservation protocol (RSVP), a flexible and scalable receiver-oriented simplex protocol, is described. RSVP provides receiver-initiated reservations to accommodate heterogeneity among receivers as well as dynamic membership changes; separates the filters from the reservation, thus allowing channel changing behavior; supports a dynamic and robust multipoint-to-multipoint communication model by taking a soft-state approach in maintaining resource reservations; and decouples the reservation and routing functions. A simple network configuration with five hosts connected by seven point-to-point links and three switches is presented to illustrate how RSVP works. Related work and unresolved issues are discussed     

A Shoelace-Based QoS Routing Protocol for Mobile Ad Hoc Networks Using Directional Antenna

In this paper, we propose a new quality-of-service (QoS) routing protocol for mobile ad hoc network (MANET) using directional antennas. The proposed scheme offers a bandwidth-based routing protocol for QoS support in MANET using the concept of multi-path. Our MAC sub-layer adopts the CDMA-over-TDMA channel model. The on-demand QoS routing protocol calculates the end-to-end bandwidth and allocates bandwidth from the source node to the destination node. The paths are combined with multiple cross links, called shoelace, when the network bandwidth is strictly limited. Due to the property of the directional antenna, these cross links can transmit data simultaneously without any data interference. We develop a shoelace-based on-demand QoS routing protocol by identifying shoelaces in a MANET so as to construct a QoS route, which satisfied the bandwidth requirement, more easily. The shoelace-based route from the source to the destination is a route whose sub-path is constructed by shoelace structure. With the identified shoelaces, our shoelace-based scheme offers a higher success rate to construct a QoS route. Finally, simulation results demonstrate that the proposed routing protocol outperform existing QoS routing protocols in terms of success rate, throughput, and average latency.     

GMCAR: Grid-based multipath with congestion avoidance routing protocol in wireless sensor networks

Recently, the interest in wireless sensor networks has been magnetized in the delay sensitive applications such as real-time applications. These time critical applications crave certain QoS requirements as though end-to-end delay guarantee and network bandwidth reservation. However, the severe resource constraints of the wireless sensor networks pose great challenges that hinder supporting these requirements. In this paper, we propose a Grid-based Multipath with Congestion Avoidance Routing protocol (GMCAR) as an efficient QoS routing protocol that is suited for grided sensor networks. We employ the idea of dividing the sensor network field into grids. Inside each grid, one of the sensor nodes is selected as a master node which is responsible for delivering the data generated by any node in that grid and for routing the data received from other master nodes in the neighbor grids. For each master node, multiple diagonal paths that connect the master node to the sink are stored as routing entries in the routing table of that node. The novelty of the proposed protocol lies behind the idea of incorporating the grids densities along with the hop count into the routing decisions. A congestion control mechanism is proposed in order to relieve the congested areas in case of congestion occurrence. Simulation results show that our proposed protocol has the potential to achieve up to 19.5% energy saving, 24.7% reduction in the delay and up to 8.5% enhancement in the network throughput when compared to another QoS routing protocol. However, when compared to the basic grid-based coordinated routing protocol, it achieves 23% energy saving. In addition, the proposed protocol shows its superiority in achieving better utilization to the available storage.     

A Mobile Bandwidth-Aggregation Reservation Scheme for NEMOs

A NEtwork that is MObile (NEMO) usually consists of at least one Mobile Router (MR) attached to the infrastructure to manage all external communication for of all nodes inside a NEMO. Because a NEMO moves as a whole, previous mobile ReSource reserVation Protocols have two problems in supporting quality of services (QoS) for NEMOs; that is, mobility unawareness and excessive signal overhead. In this paper, we first address these two problems and then propose a Mobile Bandwidth-Aggregation (MBA) reservation scheme to support QoS guaranteed services for NEMOs. In order to resolve these two problems, MBA makes an MR the proxy of all nodes insides a NEMO and has the MR aggregates and reserve the bandwidth required for all node inside a NEMO. Mathematical analysis and simulation results show that the proposed MBA scheme can significantly reduce the signal overhead for reservation maintenance. Furthermore we also present three hypothetic policies of tunnel reservations for NEMOs, and conduct simulation to evaluate these policies in terms of blocking probabilities and bandwidth utilizations. A preliminary version of this work presented at the 2006 IEEE International Conference on Communications, Volume 2, June 2006, Page(s):693–698     

Design and Performance Evaluation of a Separated Control Signaling Protocol for WDM Optical Networks

In WDM optical networks, an efficient control signaling protocol is required to dynamically establish lightpaths. This paper proposes a separated control signaling protocol (SCSP) and compares the performance of SCSP with a conventional integrated control signaling protocol (ICSP). The conventional ICSP makes reservations sequentially from the source to the destination for setting up and tearing down lightpaths. It increases the control overhead and wastes the network resource if it cannot reserve the network resource at an intermediate node. Specifically, if the receiver at the destination is not available after successful reservation at intermediate nodes, it wastes a lot of bandwidth. It causes decreasing chances of reservation for other lightpaths. Instead, SCSP separates bearer control from call control to reduce the waste of network resources. The call control function checks the availability of network resources such as wavelengths and receivers. Bearer control reserves, allocates, and releases network resources. To evaluate the performance of the two protocols, they are mathematically analyzed using a probabilistic model. Simulation results are also provided to compare the proposed protocol with the conventional ICSP in terms of utilization and blocking probability. From the results of simulation and iterative analysis, we can observe that SCSP performs better than ICSP.     

New assembly techniques and fast reservation protocols for optical burst switched networks based on traffic prediction

We propose new burst assembly schemes and fast reservation (FR) protocols for Optical Burst Switched (OBS) networks that are based on traffic prediction. The burst assembly schemes aim at minimizing (for a given burst size) the average delay of the packets incurred during the burst assembly process, while the fast reservation protocols aim at further reducing the end-to-end delay of the data bursts. The burst assembly techniques use a linear prediction filter to estimate the number of packet arrivals at the ingress node in the following interval, and launch a new burst into the network when a certain criterion, different for each proposed scheme, is met. The fast reservation protocols use prediction filters to estimate the expected length of the burst and the time needed for the burst assembly process to complete. A Burst Header Packet (BHP) packet carrying these estimates is sent before the burst is completed, in order to reserve bandwidth at intermediate nodes for the time interval the burst is expected to pass from these nodes. Reducing the packet aggregation delay and the time required to perform the reservations, reduces the total time needed for a packet to be transported over an OBS network and is especially important for real-time applications. We evaluate the performance of the proposed burst assembly schemes and show that a number of them outperform the previously proposed timer-based, length-based and average delay-based burst assembly schemes. We also look at the performance of the fast reservation (FR) protocols in terms of the probability of successfully establishing the reservations required to transport the burst.     

A comprehensive resource management framework for next generation wireless networks

We propose an integrated resource management approach that can be implemented in next generation wireless networks that support multimedia services (data, voice, video, etc.). Specifically, we combine the use of position-assisted and mobility predictive advanced bandwidth reservation with a call admission control and bandwidth reconfiguration strategy to support flexible QoS management. We also introduce a mobile agent based framework that can be used to carry out the functions of geolocation and of the proposed resource management in wireless networks. A model is also developed to obtain the optimal location information update interval in order to minimize the total cost of the system operation. The comparison of the achievable performance results of our proposed scheme with the corresponding results of a conventional system that supports advanced bandwidth reservation only, as means of supporting the QoS requirements, demonstrate that our integrated scheme can alleviate the problem of overreservation, support seamless operation throughout the wireless network, and increase significantly the system capacity.     

An adaptive reservation scheme for VBR voice traffic in wireless ATM networks

A reservation scheme, named dynamic hybrid partitioning, is proposed for the Medium Access Control (MAC) protocol of wireless ATM (WATM) networks operating in Time Division Duplex (TDD) mode. The goal is to improve the performance of the real-time Variable Bit Rate (VBR) voice traffic in networks with mixed voice/data traffic. In most proposed MAC protocols for WATM networks, the reservation phase treats all traffic equally, whether delay-sensitive or not. Hence, delay-sensitive VBR traffic sources have to compete for reservation each time they wake up from idle mode. This causes large and variable channel access delays, and increases the delay and delay variation (jitter) experienced by ATM cells of VBR traffic. In the proposed scheme, the reservation phase of the MAC protocol is dynamically divided into a contention-free partition for delay-sensitive idle VBR traffic, and a contention partition for other traffic. Adaptive algorithms dynamically adjust the partition sizes to minimize the channel bandwidth overhead. Simulation results show that the delay performance of delay-sensitive VBR traffic is improved while minimizing the overhead.     

Intermediate-node initiated reservation (IIR): a new signaling scheme for wavelength-routed networks

A problem of many distributed lightpath provisioning schemes is wavelength contention, which occurs when a connection request attempts to reserve a wavelength channel that is no longer available. This situation results from the lack of updated global link-state information at every node. In networks with highly dynamic traffic loads, wavelength contention may seriously degrade the network performance. To overcome this problem, we propose a new framework for distributed signaling and introduce a class of schemes referred to as intermediate-node initiated reservation. In the new scheme, reservations may be initiated at any set of nodes along the route; in contrast, reservations can only be initiated by the destination node in the classic destination initiated reservation (DIR) scheme. As a result, the possibility of having outdated information due to propagation delay is significantly lowered. Specifically, we consider two schemes within this framework, for networks with no wavelength conversion and for networks with sparse wavelength conversion, respectively. Theoretical and simulation results show that, compared with the classic DIR scheme, the new schemes can significantly improve the network blocking performance. The accuracy of the analytical models is also confirmed by extensive numerical simulations.     

Cluster‐based mobility management algorithms for wireless mesh networks

Wireless mesh networks (WMNs) have been the recent advancements and attracting more academicians and industrialists for their seamless connectivity to the internet. Radio resource is one among the prime resources in wireless networks, which is expected to use in an efficient way especially when the mobile nodes are on move. However, providing guaranteed quality of service to the mobile nodes in the network is a challenging issue. To accomplish this, we propose 2 clustering algorithms, namely, static clustering algorithm for WMNs and dynamic clustering algorithm for WMNs. In these algorithms, we propose a new weight‐based cluster head and cluster member selection process for the formation of clusters. The weight of the nodes in WMN is computed considering the parameters include the bandwidth of the node, the degree of node connectivity, and node cooperation factor. Further, we also propose enhanced quality of service enabled routing protocol for WMNs considering the delay, bandwidth, hopcount, and expected transmission count are the routing metrics. The performance of the proposed clustering algorithms and routing protocol are analyzed, and results show high throughput, high packet delivery ratio, and low communication cost compared with the existing baseline mobility management algorithms and routing protocols.     

Load balancing and resource reservation in mobile ad hoc networks

To ensure uninterrupted communication in a mobile ad hoc network, efficient route discovery is crucial when nodes move and/or fail. Hence, protocols such as Dynamic Source Routing (DSR) precompute alternate routes before a node moves and/or fails. In this paper, we modify the way these alternate routes are maintained and used in DSR, and show that these modifications permit more efficient route discovery when nodes move and/or fail. Our routing protocol also does load balancing among the number of alternate routes that are available. Our simulation results show that maintenance of these alternate routes (without affecting the route cache size at each router) increases the packet delivery ratio. We also show that our approach enables us to provide QoS guarantees by ensuring that appropriate bandwidth will be available for a flow even when nodes move. Towards this end, we show how reservations can be made on the alternate routes while maximizing the bandwidth usage in situations where nodes do not move. We also show how the load of the traffic generated due to node movement is shared among several alternate routes. In addition, we adaptively use Forward Error Correction techniques with our protocol and show how it can improve the packet delivery ratio.     

Dynamic-Grouping bandwidth reservation scheme for multimedia wireless networks

In wireless networks carrying multimedia traffic (voice, video, data, and image), it becomes necessary to provide a quality-of-service(QoS) guarantee for multimedia traffic connections supported by the network. In order to provide mobile hosts with high QoS in the next-generation wireless networks, efficient and better bandwidth reservation schemes must be designed. This paper presents a novel dynamic-grouping bandwidth reservation scheme as a solution to support QoS guarantees in the next-generation wireless networks. The proposed scheme is based on the probabilistic resource estimation to provide QoS guarantees for multimedia traffic in wireless cellular networks. We establish several reservation time sections, called groups, according to the mobility information of mobile hosts of each base station. The amount of reserved bandwidth for each base station is dynamically adjusted for each reservation group. We use the dynamic-grouping bandwidth reservation scheme to reduce the connection blocking rate and connection dropping rate, while increasing the bandwidth utilization. The simulation results show that the dynamic-grouping bandwidth reservation scheme provides less connection-blocking rate and less connection-dropping rate and achieves high bandwidth utilization.     

Implementation of depth‐based routing and its enhancement in AquaSim–Next Generation for underwater wireless sensor networks

In the last decade, underwater wireless sensor networks have been widely studied because of their peculiar aspects that distinguish them from common terrestrial wireless networks. Their applications range from environmental monitoring to military defense. The definition of efficient routing protocols in underwater sensor networks is a challenging topic of research because of the intrinsic characteristics of these networks, such as the need of handling the node mobility and the difficulty in balancing the energy consumed by the nodes. Depth‐based routing protocol is an opportunistic routing protocol for underwater sensor networks, which provides good performance both under high and low node mobility scenarios. The main contribution of our work is presenting a novel simulator for studying depth‐based routing protocol and its variants as well as novel routing protocols. Our simulator is based on AquaSim–Next Generation, which is a specialized tool for studying underwater networks. With our work, we improve the state of the art of underwater routing protocol simulators by implementing, among other features, a detailed cross‐layer communication and an accurate model of the operational modes of acoustic modem and their energy consumption. The simulator is open source and freely downloadable. Moreover, we propose a novel and completely distributed routing protocol, named residual energy–depth‐based routing. It takes into account the residual energy at the nodes' batteries to select the forwarder nodes and improve the network lifetime by providing a more uniform energy consumption among them. We compare its performance with that of depth‐based routing protocol and a receiver‐based routing protocol implementing a probabilistic opportunistic forwarding scheme.     

An Adaptive Cluster-Based Routing Mechanism for Energy Conservation in Mobile Ad Hoc Networks

In recent years, many studies have proposed various ways to strengthen wireless networks’ performance. In this paper, we identify some drawbacks arising from protocol improved location-aided routing (ILAR). Nodes around the borders of a given broadcast coverage might quickly and easily move out, resulting in a broken routing path. Another problem in ILAR is that, although it may have a better forwarding node available for use a relay node could fail. Therefore we propose a novel routing protocol integrated power balance scheme to help resolve the problems mentioned above. Furthermore, the scheme employs position information and a power-saving scheme to balance the energy of each node and to lengthen the entire network’s life. To achieve these goals, there must be a reduction in the simultaneous loading of networks. Therefore, we also propose a cluster-based routing mechanism in mobile ad hoc networks. This mechanism can reduce the loading of networks, energy conservation, and increase the lifetime of nodes and networks.     

Supporting bursty traffic with bandwidth guarantee in WDM distribution networks

This paper presents new research results of the DARPA-funded ONRAMP consortium on the next generation Internet to study efficient WDM-based network architectures and protocols for supporting broadband services in regional access networks. In particular, we present new efficient scheduling algorithms for bandwidth sharing in WDM distribution networks. The current ONRAMP distribution network architecture has a tree topology with each leaf node (e.g., a router or workstation) sharing access to the root node of the tree, which corresponds to an access node in the feeder network. Our model allows a leaf node to use one or more fixed-tuned or tunable transceivers; moreover, different leaf nodes can support different subsets of wavelengths depending on their expected traffic volumes. An important goal of ONRAMP is to support bandwidth-on-demand services with QoS guarantee over WDM. As a first step toward this goal, we have developed several fast scheduling algorithms for flexible bandwidth reservations in a WDM distribution network. The scheduling algorithms can provably guarantee any bandwidth reservations pattern that does not overbook network resources, i.e., bandwidth reservation (throughput) up to 100% network capacity can be supported.     

A QoS Routing Protocol with Bandwidth Allocation in Multichannel Ad Hoc Networks

Mobile multimedia applications have recently generated much interest in mobile ad hoc networks (MANETs) supporting quality-of-service (QoS) communications. Multiple non-interfering channels are available in 802.11 and 802.15 based wireless networks. Capacity of such channels can be combined to achieve higher QoS performance than for single channel networks. The capacity of MANETs can be substantially increased by equipping each network node with multiple interfaces that can operate on multiple non-overlapping channels. However, new scheduling, channel assignment, and routing protocols are required to utilize the increased bandwidth in multichannel MANETs. In this paper, we propose an on-demand routing protocol M-QoS-AODV in multichannel MANETs that incorporates a distributed channel assignment scheme and routing discovery process to support multimedia communication and to satisfy QoS bandwidth requirement. The proposed channel assignment scheme can efficiently express the channel usage and interference information within a certain range, which reduces interference and enhances channel reuse rate. This cross-layer design approach can significantly improve the performance of multichannel MANETs over existing routing algorithms. Simulation results show that the proposed M-QoS-AODV protocol can effectively increase throughput and reduce delay, as compared to AODV and M-AODV-R protocols.