δ‐CsPbI3 Intermediate Phase Growth Assisted Sequential Deposition Boosts Stable and High‐Efficiency Triple Cation Perovskite Solar Cells

Cs/FA/MA triple cation perovskite films have been well developed in the antisolvent dripping method, attributable to its outstanding photovoltaic and stability performances. However, a facile and effective strategy is still lacking for fabricating high‐quality large‐grain triple cation perovskite films via sequential deposition method a, which is one of the key technologies for high efficiency perovskite solar cells. To address this issue, a δ‐CsPbI₃ intermediate phase growth (CsPbI₃‐IPG) assisted sequential deposition method is demonstrated for the first time. The approach not only achieves incorporation of controllable cesium into (FAPbI₃)_1–x(MAPbBr₃)_x perovskite, but also enlarges the perovskite grains, manipulates the crystallization, modulates the bandgap, and improves the stability of final perovskite films. The photovoltaic performances of the devices based on these Cs/FA/MA perovskite films with various amounts of the δ‐CsPbI₃ intermediate phase are investigated systematically. Benefiting from moderate cesium incorporation and intermediate phase‐assisted grain growth, the optimized Cs/FA/MA perovskite solar cells exhibit a significantly improved power conversion efficiency and operational stability of unencapsulated devices. This facile strategy provides new insights into the compositional engineering of triple or quadruple cation perovskite materials with enlarged grains and superior stability via a sequential deposition method.     

A Dual‐Retarded Reaction Processed Mixed‐Cation Perovskite Layer for High‐Efficiency Solar Cells

Mixed‐cation perovskite solar cells (PSCs) have become of enormous interest because of their excellent efficiency, which is now crossing 23.7%. Their broader absorption, relatively high stability with low fabrication cost compared to conventional single phase ABX₃ perovskites (where A: organic cation; B: divalent metal ion; and X: halide anion) are key properties of mixed‐halide mixed‐cation perovskites. However, the controlling reaction rate and formation of extremely dense, textured, smooth, and large grains of perovskite layer is a crucial task in order to achieve highly efficient PSCs. Herein, a new simple dual‐retarded reaction processing (DRP) method is developed to synthesize a high‐quality mixed‐cation (FAPbI₃)_0.85(MAPbBr₃)_0.15 (where MAPbBr₃ stands for methylammonium lead bromide and FAPbI₃ stands for formamidinium lead iodide) perovskite thin film via intermediate phase and incorporation of nitrogen‐doped reduced graphene oxide (N‐rGO). The reaction rate is retarded via two steps: first the formation of intermediate phase and second the interaction of the nitrogen groups on N‐rGO with hydrogen atoms from formamidinium cations. This DRP process allows for the fabrication of PSCs with maximum conversion efficiency higher than 20.3%.     

Layered Ruddlesden–Popper Efficient Perovskite Solar Cells with Controlled Quantum and Dielectric Confinement Introduced via Doping

Layered Ruddlesden–Popper (RP) hybrid perovskite semiconductors have recently emerged as promising materials for photovoltaics application. However, the strong quantum and dielectric confinement of RP perovskite compounds increases their optical bandgap and binding energy of exciton, which limit their application in solar cells. Herein, the doping of RP‐based (BA)₂(MA)₃Pb₄I₁₃ perovskite materials by means of Li⁺ is reported for the first time, which can significantly help to reduce dielectric confinement and thus the exciton‐binding energy via reducing the dielectric constant difference between organic spacer cation and inorganic framework. Furthermore, the Li⁺ doping boosts the carrier mobility, reduces the trap density states, and thus allows to achieve power conversion efficiency of ≈15% via Li⁺‐(BA)₂(MA)₃Pb₄I₁₃‐based perovskite solar cell, which is the highest efficiency for layered perovskites (n = 4) so far. This work highlights the promising ionic doping engineering for further improvement of the layered perovskite materials.     

Retarding Thermal Degradation in Hybrid Perovskites by Ionic Liquid Additives

Recent years have witnessed considerable progress in the development of solar cells based on lead halide perovskite materials. However, their intrinsic instability remains a limitation. In this context, the interplay between the thermal degradation and the hydrophobicity of perovskite materials is investigated. To this end, the salt 1‐(4‐ethenylbenzyl)‐3‐(3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctylimidazolium iodide (ETI), is employed as an additive in hybrid perovskites, endowing the photoactive materials with high thermal stability and hydrophobicity. The ETI additive inhibits methylammonium (MA) permeation in methylammonium lead triiodide (MAPbI₃) occurring due to intrinsic thermal degradation, by inhibiting out‐diffusion of the MA⁺ cation, preserving the pristine material and preventing decomposition. With this simple approach, high efficiency solar cells based on the unstable MAPbI₃ perovskite are markedly stabilized under maximum power point tracking, leading to greater than twice the preserved efficiency after 700 h of continuous light illumination and heating (60 °C). These results suggest a strategy to tackle the intrinsic thermal decomposition of MAI, an essential component in all state‐of‐the‐art perovskite compositions.     

A Spacer Cation Assisted Nucleation and Growth Strategy Enables Efficient and High-Luminance Quasi-2D Perovskite LEDs

Quasi-2D Ruddlesden-Popper perovskites receive tremendous attention for application in light-emitting diodes (LEDs). However, the role of organic ammonium spacers on perovskite film has not been fully-understood. Herein, a spacer cation assisted perovskite nucleation and growth strategy, where guanidinium (GA⁺) spacer is introduced into the perovskite precursor and at the interface between the hole transport layer (HTL) and the perovskite, to achieve dense and uniform perovskite films with enhanced optical and electrical performance is developed. A thin GABr interface pre-formed on HTL provides more nucleation sites for perovskite crystal; while the added GA⁺ in perovskite reduces the crystallization rate due to strong hydrogen bonding interacts with intermediates, which promotes the growth of enhanced-quality quasi-2D perovskite films. The ionized ammonium group ( NH₃⁺) of GA⁺ also favors formation of polydisperse domain distribution, and amine or imine ( NH₂ or NH) group interact with perovskite defects through coordination bonding. The spacer cation assisted nucleation and growth strategy is advantageous for producing efficient and high-luminance perovskite LEDs, with a peak external quantum efficiency of over 20% and a luminance up to 100 000 cd m⁻². This work can inform and underpin future development of high-performance perovskite LEDs with concurrent high efficiency and brightness.     

An Interdiffusion Method for Highly Performing Cesium/Formamidinium Double Cation Perovskites

The fabrication of high‐quality cesium (Cs)/formamidinium (FA) double‐cation perovskite films through a two‐step interdiffusion method is reported. Cs_x FA_1‐x PbI_{3‐y(1‐x )}Br_{y(1‐x )} films with different compositions are achieved by controlling the amount of CsI and formamidinium bromide (FABr) in the respective precursor solutions. The effects of incorporating Cs⁺ and Br^? on the properties of the resulting perovskite films and on the performance of the corresponding perovskite solar cells are systematically studied. Small area perovskite solar cells with a power conversion efficiency (PCE) of 19.3% and a perovskite module (4 cm²) with an aperture PCE of 16.4%, using the Cs/FA double cation perovskite made with 10 mol% CsI and 15 mol% FABr (Cs_0.1FA_0.9PbI_2.865Br_0.135) are achieved. The Cs/FA double cation perovskites show negligible degradation after annealing at 85 °C for 336 h, outperforming the perovskite materials containing methylammonium (MA).     

High Cationic Dispersity Boosted Oxygen Reduction Reactivity in Multi-Element Doped Perovskites

Oxygen-ion conducting perovskite oxides are important functional materials for solid oxide fuel cells and oxygen-permeable membranes operating at high temperatures (>500 °C). Co-doped perovskites have recently shown their potential to boost oxygen-related kinetics, but challenges remain in understanding the underlying mechanisms. This study unveils the local cation arrangement as a new key factor controlling oxygen kinetics in perovskite oxides. By single- and co-doping Nb⁵⁺ and Ta⁵⁺ into SrCoO_3-δ, dominant factors affecting oxygen kinetics, such as lattice geometry, cobalt states, and oxygen vacancies, which are confirmed by neutron and synchrotron X-ray diffraction as well as high-temperature X-ray absorption spectroscopy, are controlled. The combined experimental and theoretical study unveils that co-doping likely leads to higher cation dispersion at the B-site compared to single-doping. Consequently, a high-entropy configuration enhances oxygen ion migration in the lattice, translating to improved oxygen reduction activity.     

Metal Halide Perovskite Surfaces with Mixed A-Site Cations: Atomic Structure and Device Stability

Mixing cations in the perovskite structure has been shown to improve optoelectronic device performance and stability. In particular, Cs_xMA_1-xPbBr₃ (MA = CH₃NH₃) has been used to build high-efficiency light-emitting diodes. Despite those advantages, little is known about the exact location of the cations in the mixed perovskite film, and how cation distribution affects device properties and stability. By using scanning tunneling microscopy , the exact atomic structure of the mixed cation Cs_xMA_1-xPbBr₃ perovskite interface is revealed. In addition, X-ray photoelectron spectroscopy, ultraviolet photoemission spectroscopy and inverse photoemission spectroscopy are used to study the stability and electronic properties of the Cs_xMA_1-xPbBr₃ perovskite film. Partial substitution of MA⁺ by Cs⁺ induces a modification of the perovskite surface structure, leading to improved device stability is shown. These results provide a better understanding of the key parameters involved in the stability of mixed cation perovskite solar cells.     

Triamine‐Based Aromatic Cation as a Novel Stabilizer for Efficient Perovskite Solar Cells

Operational stability of perovskite solar cells has been a challenge from the beginning of perovskite research. In general, humidity and heat are the most well‐known degradation sources for perovskites, requiring ideal design of perovskite chemistry to withstand them. Although triple‐cation perovskite (Cs_0.05(FA_0.85MA_0.15)_0.95Pb(I_0.85Br_0.15)₃) has been already introduced as the stable perovskite material, the high reactivity of methylammonium and formamidinium in the cation sites demands further modification. Herein, 1,2,4‐triazole is suggested as an effective cation solute to improve the performance and stability of perovskite solar cells. 1,2,4‐Triazole is an aromatic cation with low dipole moment that is stable under humidity and heat. It also possesses three nitrogen atoms, forming additional hydrogen bonds in the lattice, stabilizing the material. In this study, the solar cell utilizing 1,2,4‐triazole alloying achieves a power conversion efficiency of 20.9% with superior stability under extreme condition (85 °C/85% of relative humidity (RH), encapsulated) for 700 h. The 1,2,4‐triazole‐alloyed perovskite exhibits reduced trap density and film roughness and enhanced carrier lifetime with electrical conductivity, suggesting an ideal perovskite structure for efficient and stable optoelectronic applications.     

Reversible Photoinduced Phase Segregation and Origin of Long Carrier Lifetime in Mixed‐Halide Perovskite Films

Mixed‐halide hybrid perovskite semiconductors have attracted tremendous attention as a promising candidate for efficient photovoltaic and light‐emitting devices. However, these perovskite materials may undergo phase segregation under light illumination, thus affecting their optoelectronic properties. Here, photoexcitation induced phase segregation in triple‐cation mixed‐halide perovskite films that yields to red‐shift in the photoluminescence response is reported. It is demonstrated that photoexcitation induced halide migration leads to the formation of smaller bandgap iodide‐rich and larger bandgap bromide‐rich domains in the perovskite film, where the phase segregation rate is found to follow the excitation power‐density as a power law. Results confirm that charge carrier lifetime increases due to the trapping of photoexcited carriers in the segregated smaller bandgap iodide‐rich domains. Interestingly, these photoinduced changes are fully reversible and thermally activated when the excitation power is turned off. A significant difference in activation energies for halide ion migration is observed during phase segregation and recovery process. Additionally, the emission linewidth broadening is investigated as a function of temperature which is governed by the exciton–optical phonon coupling. The mechanism of photoinduced phase segregation is interpreted based on exciton–phonon coupling strength in both mixed and demixed (segregated) states of perovskite films.     

Tuning the bandgap of double perovskites

With great achievements in efficiency,stability,and large-scale preparation of perovskite solar cells (PSCs),the com-mercialization of PSC is ongoing,but there is still an issue on lead toxicity.Although lead content in the device is low,the water solubility of lead salts leads to potential environmental pollution.At present,the non-lead perovskites studied in-clude:divalent metal perovskite (e.g.,Sn2+,Ge2+,Cu2+),trivalent metal perovskite (e.g.,Bi3+,Sb3+,In3+),tetravalent met-al double perovskite (e.g.,Sn4+,Pd4+,Ti4+,Pt4+) and mono-trivalent mixed double perovskite (e.g.,Ag+ and Bi3+,Ag+ and In3+,Ag+ and Sb3+).Their properties are summarized in Table 1.Since the first report on non-lead double perovskite Cs2AgBiBr6 in 2016[1],this material has caused extensive re-search in optoelectronic devices because of its long carrier lifetime[1] and good stability[2].However,owing to its wide and indirect bandgap (Eg) (～2.0 eV),its light absorption range is narrow,which limits its application in photovoltaics.At present,the power conversion efficiency (PCE) of Cs2AgBiBr6 device is ～3％[3].To enhance PCE,the Eg needs to be nar-rowed.The efforts in this area focus on adjusting chemical composition and physical structure (Fig.1) to tune Eg.     

A Thienothiophene-Based Cation Treatment Allows Semitransparent Perovskite Solar Cells with Improved Efficiency and Stability

Perovskite surface treatment with additives has been reported to improve charge extraction, stability, and/or surface passivation. In this study, treatment of a 3D perovskite ((FAPbI₃)_1−x(MAPbBr₃)_x) layer with a thienothiophene-based organic cation (TTMAI), synthesized in this work, is investigated. Detailed analyses reveal that a 2D (n = 1) or quasi-2D layer does not form on the PbI₂-rich surface 3D perovskite. TTMAI-treated 3D perovskite solar cells (PSCs) fabricated in this study show improved fill factors, providing an increase in their power conversion efficiencies (PCEs) from 17% to over 20%. It is demonstrated that the enhancement is due to better hole extraction by drift-diffusion simulations. Furthermore, thanks to the hydrophobic nature of the TTMAI, PSC maintains 82% of its initial PCE under 15% humidity for over 380 h (the reference retains 38%). Additionally, semitransparent cells are demonstrated reaching 17.9% PCE with treated 3D perovskite, which is one of the highest reported efficiencies for double cationic 3D perovskites. Moreover, the semitransparent 3D PSC (TTMAI-treated) maintains 87% of its initial efficiency for six weeks (>1000 h) when kept in the dark at room temperature. These results clearly show that this study fills a critical void in perovskite research where highly efficient and stable semitransparent perovskite solar cells are scarce.     

Constructing CsPbBr3 Cluster Passivated‐Triple Cation Perovskite for Highly Efficient and Operationally Stable Solar Cells

Ion migration and phase segregation, in mixed‐cation/anion perovskite materials, raises a bottleneck for its stability improvement in solar cells operation. Here, the synergetic effect of electric field and illumination on the phase segregation of Cs_0.05FA_0.80MA_0.15Pb(I_0.85Br_0.15)₃ (CsFAMA) perovskite is demonstrated. CsFAMA perovskite with a CsPbBr₃‐clusters passivated structure is realized, in which CsPbBr₃‐clusters are located at the surface/interface of CsFAMA grains. This structure is realized by introducing a CsPbBr₃ colloidal solution into the CsFAMA precursor. It is found that CsPbBr₃ passivation greatly suppresses phase segregation in CsFAMA perovskite. The resultant passivated CsFAMA also exhibits a longer photoluminescence lifetime due to reduced defect state densities, produces highly efficient TiO₂‐based planar solar cells with 20.6% power conversion efficiency and 1.195 V open‐circuit voltage. The optimized devices do not suffer from a fast burn‐in degradation and retain 90% of their initial performance at maximum power under one‐sun illumination at 25 °C (65 °C) exceeding 500 h (100 h) of continuous operation. This result represents the most stable output among CsFAMA solar cells in a planar structure with Spiro‐OMeTAD.     

2D/3D Heterostructure for Semitransparent Perovskite Solar Cells with Engineered Bandgap Enables Efficiencies Exceeding 25% in Four‐Terminal Tandems with Silicon and CIGS

Wide‐bandgap perovskite solar cells (PSCs) with optimal bandgap (E_g) and high power conversion efficiency (PCE) are key to high‐performance perovskite‐based tandem photovoltaics. A 2D/3D perovskite heterostructure passivation is employed for double‐cation wide‐bandgap PSCs with engineered bandgap (1.65 eV ≤ E_g ≤ 1.85 eV), which results in improved stabilized PCEs and a strong enhancement in open‐circuit voltages of around 45 mV compared to reference devices for all investigated bandgaps. Making use of this strategy, semitransparent PSCs with engineered bandgap are developed, which show stabilized PCEs of up to 25.7% and 25.0% in four‐terminal perovskite/c‐Si and perovskite/CIGS tandem solar cells, respectively. Moreover, comparable tandem PCEs are observed for a broad range of perovskite bandgaps. For the first time, the robustness of the four‐terminal tandem configuration with respect to variations in the perovskite bandgap for two state‐of‐the‐art bottom solar cells is experimentally validated.     

复合钙钛矿型介质陶瓷材料的研究进展

将复合钙钛矿型介质陶瓷材料分成铅系和无铅系两大类,分别讨论了它们的研究进展,结果表明:采用高活性原料及两步固相合成法、湿化学等方法制备铅系复合钙钛矿材料,可以有效抑制铅挥发及杂相的出现,得到单相钙钛矿相;无铅型复合钙钛矿材料性能主要由不同的A或B位离子复合决定,并通过采用湿化学方法得到改善。目前,纳米级钙钛矿陶瓷材料的制备和研究正引起越来越多人的兴趣。     

Air‐Stable Cesium Lead Iodide Perovskite for Ultra‐Low Operating Voltage Resistive Switching

CsPbX₃ (X = halide, Cl, Br, or I) all‐inorganic halide perovskites (IHPs) are regarded as promising functional materials because of their tunable optoelectronic characteristics and superior stability to organic–inorganic hybrid halide perovskites. Herein, nonvolatile resistive switching (RS) memory devices based on all‐inorganic CsPbI₃ perovskite are reported. An air‐stable CsPbI₃ perovskite film with a thickness of only 200 nm is successfully synthesized on a platinum‐coated silicon substrate using low temperature all‐solution process. The RS memory devices of Ag/polymethylmethacrylate (PMMA)/CsPbI₃/Pt/Ti/SiO₂/Si structure exhibit reproducible and reliable bipolar switching characteristics with an ultralow operating voltage (<+0.2 V), high on/off ratio (>10⁶), reversible RS by pulse voltage operation (pulse duration < 1 ms), and multilevel data storage. The mechanical flexibility of the CsPbI₃ perovskite RS memory device on a flexible substrate is also successfully confirmed. With analyzing the influence of phase transition in CsPbI₃ on RS characteristics, a mechanism involving conducting filaments formed by metal cation migration is proposed to explain the RS behavior of the memory device. This study will contribute to the understanding of the intrinsic characteristics of IHPs for low‐voltage resistive switching and demonstrate the huge potential of them for use in low‐power consumption nonvolatile memory devices on next‐generation computing systems.     

Understanding the Role of Small Cations on the Electroluminescence Performance of Perovskite Light-Emitting Diodes

The delicate engineering of monovalent cations in perovskite material has led to continuous performance breakthroughs and stability improvement for the perovskite light-emitting diodes (PeLEDs). However, the exact role of A-site cations on the electroluminescence (EL) performance and degradation mechanism of PeLEDs has not been systematically answered yet. Herein, it is demonstrated that the most commonly used methylammonium cation (MA⁺) has an adverse effect on the electrochemical reaction at the interface between perovskite and metal-oxide layer, leading to deteriorated EL performance as compared to that of the formamidinium cation (FA⁺)-based perovskite. It reveals that the accelerated deprotonation process of MA⁺ under an electric field will aggravate the reaction between iodide and metal ion in oxide layer. The further substitution of a small portion of FA⁺ with inorganic cesium cation (Cs⁺) results in much enhanced crystallinity and enlarged crystal size, leading to an optimized peak external quantum efficiency of 21.3%. The ion migration process in the PeLEDs can be significantly suppressed with Cs⁺ incorporation, leading to a smaller roll-off under large current density and an elongated half-lifetime of 190.1 h under a current density of 20 mA cm^-2, representing one of the most stable PeLEDs based on 3D perovskite layer.     

Dual-Phase Stabilized Perovskite Nanowires for Reduced Defects and Longer Carrier Lifetime

1D perovskite materials are of significant interest to build a new class of nanostructures for electronic and optoelectronic applications. However, the study of colloidal perovskite nanowires (PNWs) lags far behind those of other established perovskite materials such as perovskite quantum dots and perovskite thin films. Herein, a dual-phase passivation strategy to synthesize all-inorganic PNWs with minimized surface defects is reported. The local phase transition from CsPbBr₃ to CsPb₂Br₅ in PNWs increases the photoluminescence quantum yield, carrier lifetime, and water-resistivity, owing to the energetic and chemical passivation effect. In addition, these dual-phase PNWs are employed as an interfacial layer in perovskite solar cells (PSCs). The enhanced surface passivation results in an efficient carrier transfer in PSCs, which is a critical enabler to increase the power conversion efficiency (PCE) to 22.87%, while the device without PNWs exhibits a PCE of 20.74%. The proposed strategy provides a surface passivation platform in 1D perovskites, which can lead to the development of novel nanostructures for future optoelectronic devices.     

Combination of Hybrid CVD and Cation Exchange for Upscaling Cs‐Substituted Mixed Cation Perovskite Solar Cells with High Efficiency and Stability

Mixed cation hybrid perovskites such as Cs_xFA_1?xPbI₃ are promising materials for solar cell applications, due to their excellent photoelectronic properties and improved stability. Although power conversion efficiencies (PCEs) as high as 18.16% have been reported, devices are mostly processed by the anti‐solvent method, which is difficult for further scaling‐up. Here, a method to fabricate Cs_xFA_1?xPbI₃ by performing Cs cation exchange on hybrid chemical vapor deposition grown FAPbI₃ with the Cs⁺ ratio adjustable from 0 to 24% is reported. The champion perovskite module based on Cs_0.07FA_0.93PbI₃ with an active area of 12.0 cm² shows a module PCE of 14.6% and PCE loss/area of 0.17% cm^?2, demonstrating the significant advantage of this method toward scaling‐up. This in‐depth study shows that when the perovskite films prepared by this method contain 6.6% Cs⁺ in bulk and 15.0% at the surface, that is, Cs_0.07FA_0.93PbI₃, solar cell devices show not only significantly increased PCEs but also substantially improved stability, due to favorable energy level alignment with TiO₂ electron transport layer and spiro‐MeOTAD hole transport layer, increased grain size, and improved perovskite phase stability.