首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 61 毫秒
1.
角馈式微带平面天线阵   总被引:1,自引:0,他引:1  
介绍一种新型微带天线阵,从基本原理出发,较详细地阐述了对角端馈电的方形贴片天线阵及其单元的分析思路和相应公式,设计出了一副瓣低于30dB的微带平面天线阵,理论计算与测量结果比较吻合。  相似文献   

2.
提出了一种采用波导缝隙和微带线共同给X波段微带贴片天线阵馈电的新型方式.用NFDTD对这种面阵进行数值仿真和设计.已制作出的天线阵的实测结果表明其效率可达68.5%.  相似文献   

3.
论述了圆极化微带天线阵的设计方法。以工作频率为5.8GHz,32单元圆极化微带天线阵为研究对象,设计出了与馈电网络为一体、具有圆极化特性的微带天线阵,从而解决了圆极化微带天线阵馈电网络较为复杂、工程实现较为困难这一问题。实验结果表明该天线阵具有良好的圆极化特性,进而说明了该方法是有效可行的。  相似文献   

4.
白国新  傅光  熊向飞 《电子科技》2007,(12):36-38,41
设计并制作了一种移动载体上安装的方位面宽波束的二元微带天线阵,采用了缝隙耦合馈电的形式展宽带宽。为了提高增益而采用微带二元阵。通过调节贴片宽度、地板宽度,实现方位面的宽波束。并对其特性进行了仿真和测试。测试结果与仿真结果达到了较好的一致性,证明了设计方法的有效性。  相似文献   

5.
段磊  赵伟  亓东  李晓 《现代雷达》2013,35(2):52-55
针对波束倾角可控天线的小型化和低成本,设计了宽频带双缝隙耦合矩形微带天线单元,组成1×8元线阵,采用2套基于Wilkinson不等功分器的馈电网络实现切比雪夫的幅度分布。具有不同相位差的2套馈电网络,通过不同的缝隙耦合对同一微带单元口径面馈电,分别形成了2种倾角的波束。仿真结果表明,共口径双缝隙耦合微带天线阵实现了90°和75°两种波束倾角的可控切换,是一种体积小、造价低的方向图可重构天线。  相似文献   

6.
Ku波段DBS微带接收天线阵   总被引:1,自引:1,他引:0  
介绍了一种Ku波段接收直播卫星电视信号的平面型天线。该平面型天线是一种由矩形微带贴片及其位于同一平面的微带线分支馈电网络组成的平面微带天线阵。采用商用计算软件对此天线阵进行仿真设计,并制作了由1024个微带矩形贴片组成的阵列天线,对其参数进行TN试,表明计算与测试结果基本吻合。最后用此天线接收了若干卫星上的Ku波段电视信号,效果良好。  相似文献   

7.
设计了一种连续旋转馈电方式下层叠结构的双单元圆极化微带天线阵。讨论了利用调谐支节优化层叠结构微带天线阻抗带宽的方法,并在此基础上引入连续旋转馈电方式组成了二元微带天线阵。制作并测试了相应的天线阵,结果表明:采用层叠结构可以有效扩展微带天线的阻抗带宽,同时提高了天线增益,连续旋转馈电技术则提高了天线阵的圆极化纯度,测试结果与仿真吻合较好。  相似文献   

8.
研究了一种新型的C波段微带天线阵,他采用矩形同轴线(RCL)结构构成的集成化低损耗馈电网络馈电,有效降低了馈电网络损耗,提高了微带天线阵增益。首先分析了矩形同轴线相关理论,并对矩形同轴线馈电网络和微带天线子阵的基本原理和设计方法,分别运用HFSS和CST进行了仿真设计。仿真和实测结果表明,该馈电网络具有损耗低、稳定性好等优点,实测结果与仿真吻合。  相似文献   

9.
研制了一种俯仰向波束固定,方位向频扫的Ku波段频扫平面天线阵.采用双层微带结构获得带宽约18%的宽带微带贴片天线作为阵列单元.天线阵俯仰向采用微带功分器及该种天线单元组成线阵.方位向为实现波束较大范围的频扫能力, 并提高天线阵的工作效率采用波导慢波线缝隙与线阵微带线电磁耦合结构进行馈电.在采用HFSS软件完成仿真设计的基础上,加工并测试了一套12×40规模的天线阵,结果表明该天线阵在工作频段内驻波比优于1.5,波束扫描范围大于80, 副瓣电平优于-20 dB,除中心频点外,增益大于26.5 dB.  相似文献   

10.
提出了一种新型宽频带2×2方形缝隙槽圆极化天线阵。天线阵包含一个连续旋转馈电结构、4个非对称U型馈电枝节和一个方形槽接地板。与传统圆极化天线阵所采用的L型馈电枝节不同,首次提出了一种新型非对称U形馈电枝节来改善天线的圆极化性能。利用这些枝节和缝隙槽作为微扰元素,缝隙槽天线阵可以激发多重圆极化谐振模式,进而产生宽频带的圆极化辐射。测试结果表明,该天线阵3 dB轴比带宽为81.3%(1.75~4.15 GHz)而10 dB回波损耗达到88.6%(1.96~5.08 GHz)。此天线阵具有宽频带特性,在WLAN(2.4~2.48 GHz)和WiBro(2.3~2.39 GHz)等无线通信系统中有潜在的应用前景。  相似文献   

11.
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.  相似文献   

12.
The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.  相似文献   

13.
Today, micro-system technology and the development of new MEMS (Micro-Electro-Mechanical Systems) are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.  相似文献   

14.
The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.  相似文献   

15.
From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.  相似文献   

16.
This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel's.  相似文献   

17.
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.  相似文献   

18.
It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output(MIMO) communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.  相似文献   

19.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.  相似文献   

20.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号