A Bifunctional Biomaterial with Photothermal Effect for Tumor Therapy and Bone Regeneration

Malignant bone tumor is one of the major bone diseases. The treatment of such a bone disease typically requires the removal of bone tumor and regeneration of tumor‐initiated bone defects simultaneously. To address this issue, it is required that implanted biomaterials should combine the bifunctions of both therapy and regeneration. In this work, a bifunctional graphene oxide (GO)‐modified β‐tricalcium phosphate (GO‐TCP) composite scaffold combining a high photothermal effect with significantly improved bone‐forming ability is prepared by 3D‐printing and surface‐modification strategies. The prepared GO‐TCP scaffolds exhibit excellent photothermal effects under the irradiation of 808 nm near infrared laser (NIR) even at an ultralow power density of 0.36 W cm^?2, while no photothermal effects are observed for pure β‐TCP scaffolds. The photothermal temperature of GO‐TCP scaffolds can be effectively modulated in the range of 40–90 °C by controlling the used GO concentrations, surface‐modification times, and power densities of NIR. The distinct photothermal effect of GO‐TCP scaffolds induces more than 90% of cell death for osteosarcoma cells (MG‐63) in vitro, and further effectively inhibits tumor growth in mice. Meanwhile, the prepared GO‐TCP scaffolds possess the improved capability to stimulate the osteogenic differentiation of rabbit bone mesenchymal stem cells (rBMSCs) by upregulating bone‐related gene expression, and significantly promote new bone formation in the bone defects of rabbits as compared to pure β‐TCP scaffolds. These results successfully demonstrate that the prepared GO‐TCP scaffolds have bifunctional properties of photothermal therapy and bone regeneration, which is believed to pave the way to design and fabricate novel implanting biomaterials in combination of therapy and regeneration functions.     

Polydopamine‐Graphene Oxide Flame Retardant Nanocoatings Applied via an Aqueous Liquid Crystalline Scaffold

A highly effective flame retardant (FR) nanocoating was developed by conducting oxidative polymerization of dopamine monomer within an aqueous liquid crystalline (LC) graphene oxide (GO) scaffold coating. Due to its high water content, the LC scaffold coating approach facilitated fast transport and polymerization of dopamine precursors into polydopamine (PDA) within the water swollen interlayer galleries. Uniform and periodically stacked (14.5 Å d‐spacing) PDA/GO nanocoatings could be universally applied on different surfaces, including macroporous flexible polyurethane (PU) foam and flat substrates such as silicon wafers. Remarkably, PDA/GO coated PU foam exhibited highly efficient flame retardant performance reflected by a 65% reduction in peak heat release rate at 5 wt% PDA/GO loading in an 80 nm thick coating. While many physically mixed flame retardants are usually detrimental to the mechanical properties of the foam, the PDA/GO coating did not affect mechanical properties substantially. In addition, the PDA/GO coatings were stable in water due to the intrinsic adhesion capability of PDA and the transformation of GO to the more hydrophobic reduced GO form. Given that PDA is produced from dopamine, a molecule prevalent in nature, these findings suggest that significant opportunities exist for new polymeric FRs derived from other natural catechols.     

Stimuli‐Responsive Scaffold for Breast Cancer Treatment Combining Accurate Photothermal Therapy and Adipose Tissue Regeneration

Development of new therapeutic scaffolds to selectively destruct tumors under gentle conditions meanwhile promoting adipose tissue formation would be a promising strategy for clinical treatment of breast cancer. Herein, a stimuli‐responsive scaffold composed of polyacrylic acid‐g‐polylactic acid (PAA‐g‐PLLA) modified graphene oxide (GO) with a cleavable bond in between (GO‐PAA‐g‐PLLA), gambogic acid (GA), and polycaprolactone (PCL) is fabricated and then preseeded on adipose‐derived stem cells (ADSCs) for breast cancer treatment. This GO–GA‐polymer scaffold is able to simultaneously perform pH‐triggered low temperature (45 °C) photothermal therapy to selectively induce the apoptosis of tumor cells and significantly improve ADSCs growth without any photothermal damage. The low‐temperature photothermal therapy of the scaffolds can induce more than 95% of cell death for human breast cancer (MCF‐7) in vitro, which further completely inhibits tumor growth and finally eliminates tumor tissue in mice. Meanwhile, the prepared GO–GA‐polymer scaffold possesses the improved capability to stimulate the differentiation of ADSCs into adipocytes by upregulating adipo‐related gene expression, and significantly promotes new adipose tissue formation whether with or without NIR irradiation. These results successfully demonstrate that the prepared GO–GA‐polymer scaffolds with bifunctional properties will be a promising candidate for clinical cases involving both tumor treatment and tissue engineering.     

A Graphene Oxide and Copper‐Centered Metal Organic Framework Composite as a Tri‐Functional Catalyst for HER,OER, and ORR

A composite made from the assembly of graphene oxide (GO) and copper‐centered metal organic framework (MOF) shows good performance as a tri‐functional catalyst in three important electrocatalysis reactions, namely: the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). One of the challenges in the area of electrocatalysis is to find an effective catalyst that will reduce, as well as generate, oxygen at moderate temperatures. The enhanced electrocatalytic properties and stability in acid of the GO‐MOF composite is due to the unqiue porous scaffold structure, improved charge transport and synergistic interactions between the GO and MOF. In polymer electrolyte membrane fuel cell testing, the GO‐incorporated Cu‐MOF composite delivers a power density that is 76% that of the commercial Pt catalyst.     

Biomimetic Composite Scaffolds to Manipulate Stem Cells for Aiding Rheumatoid Arthritis Management

Stem cell transplantation is a promising alternative therapy for rheumatoid arthritis (RA) patients, with the potential to suppress autoimmune in?ammation and prevent joint damage. However, widespread application of RA therapy based on stem cell transplantation is limited due to poor migration, local retention, and uncontrolled differentiation of stem cells. Here, inspired by the dynamic construction of bone matrix, a structurally and functionally optimized scaffold for loading bone marrow stem cells (BMSCs) is designed to aid RA management. The composite scaffolds consist of stiff 3D printing porous metal scaffolds (3DPMS) and soft multifunctional polysaccharide hydrogels, wherein 3DPMS meet the requirements for large‐scale bone defects caused by RA. Attractively, the fabricated hydrogels on the composite scaffold are self‐healable, injectable, biocompatible, and biodegradable, which endow the resultant scaffold many aspects mimicking the extracellular matrix (ECM). After encapsulation of BMSCs, hydrogels are administered into the inner pores of 3DPMS, abbreviated as BMSCs@3DPMS/hydrogels. In this study, BMSCs@3DPMS/hydrogels have a good effect on improving RA, such as remodeling of knee joint articular cartilage, inhibition of in?ammatory cytokines, and promotion of subchondral bone regeneration. Besides RA, the innovative scaffolds may also serve as an ideal biomaterial for other bone regenerative therapies in various orthopedic diseases.     

Integrated and Bifunctional Bilayer 3D Printing Scaffold for Osteochondral Defect Repair

Bioinspired scaffolds with two distinct regions resembling stratified anatomical architecture provide potential strategies for osteochondral defect repair and are studied in preclinical animals. However, delamination of the two layers often causes tissue disjunction between the regenerated cartilage and subchondral bone, leading to few commercially available clinical applications. This study develops an integrated poly(ε-caprolactone) (PCL)-based scaffold for repairing osteochondral defects. An extracellular matrix (ECM)-incorporated 3D printing composite scaffold (ECM/PCL) coated with ECM hydrogel (E-co-E/PCL) is fabricated as the upper layer, and magnesium oxide nanoparticles coated with polydopamine (MgO@PDA)-incorporated composite scaffold (MD/PCL) is fabricated using 3D printing as the bottom layer. The physicochemical and mechanical properties of the bilayer scaffold meet the requirements in designing and fabricating the osteochondral scaffold, especially a strong interface possessed between the two layers. By in vitro study, the integrated scaffold stimulates proliferation, chondrogenic differentiation, and osteogenic differentiation of human bone mesenchymal stem cells. Moreover, the integrated bilayer scaffold exhibits well repair ability to facilitate simultaneous regeneration of cartilage and subchondral bone after implanting into the osteochondral defect in rats. In addition, cartilage “tidemarks” completely regenerated after 12 weeks of implantation of the bilayer scaffold, which indicates no tissue disjunctions formed between the regenerated cartilage and subchondral bone.     

3D Printing of Bilineage Constructive Biomaterials for Bone and Cartilage Regeneration

Owing to the different biological properties of articular cartilage and subchondral bone, it remains significant challenge to construct a bi‐lineage constructive scaffold. In this study, manganese (Mn)‐doped β‐TCP (Mn‐TCP) scaffolds with varied Mn contents are prepared by a 3D‐printing technology. The effects of Mn on the physicochemical properties, bioactivity, and corresponding mechanism for stimulating osteochondral regeneration are systematically investigated. The incorporation of Mn into β‐TCP lowers the lattices parameters and crystallization temperatures, but improves the scaffold density and compressive strength. The ionic products from Mn‐TCP significantly improve the proliferation of both rabbit chondrocytes and mesenchymal stem cells (rBMSCs), as well as promote the differentiation of chondrocytes and rBMSCs. The in vivo study shows that Mn‐TCP scaffolds distinctly improve the regeneration of subchondral bone and cartilage tissues as compared to TCP scaffolds, upon transplantation in rabbit osteochondral defects for 8 and 12 weeks. The mechanism is closely related to the Mn²⁺ ions significantly stimulated the proliferation and differentiation of chondrocytes through activating HIF pathway and protected chondrocytes from the inflammatory osteoarthritis environment by activating autophagy. These findings suggest that 3D‐printing of Mn‐containing scaffolds with improved physicochemical properties and bilineage bioactivities represents an intelligent strategy for regenerating osteochondral defects.     

A Bi‐Lineage Conducive Scaffold for Osteochondral Defect Regeneration

Because cartilage and bone tissues have different lineage‐specific biological properties, it is challenging to fabricate a single type of scaffold that can biologically fulfill the requirements for regeneration of these two lineages simultaneously within osteochondral defects. To overcome this challenge, a lithium‐containing mesoporous bioglass (Li‐MBG) scaffold is developed. The efficacy and mechanism of Li‐MBG for regeneration of osteochondral defects are systematically investigated. Histological and micro‐CT results show that Li‐MBG scaffolds significantly enhance the regeneration of subchondral bone and hyaline cartilage‐like tissues as compared to pure MBG scaffolds, upon implantation in rabbit osteochondral defects for 8 and 16 weeks. Further investigation demonstrates that the released Li+ ions from the Li‐MBG scaffolds may play a key role in stimulating the regeneration of osteochondral defects. The corresponding mechanistic pathways involve Li+ ions enhancing the proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs) through activation of the Wnt signalling pathway, as well as Li+ ions protecting chondrocytes and cartilage tissues from the inflammatory osteoarthritis (OA) environment through activation of autophagy. These findings suggest that the incorporation of Li+ ions into bioactive MBG scaffolds is a viable strategy for fabricating bi‐lineage conducive scaffolds that enhance regeneration of osteochondral defects.     

Production and Potential of Bioactive Glass Nanofibers as a Next‐Generation Biomaterial

Over the past decades, bioactive glass has played a central role in the bone regeneration field, due to its excellent bioactivity, osteoconductivity, and even osteoinductivity. Herein, exploitation of bioactive glass as a one‐dimensional nanoscale fiber by employing an electrospinning process based on a sol–gel precursor is reported for the first time. Under controlled processing conditions, continuous nanofibers have been generated successfully with variable diameters. The excellent bioactivity of the nanofiber is confirmed in vitro within a simulated body fluid by the rapid induction of bonelike minerals onto the nanofiber surface. The bone‐marrow‐derived cells are observed to attach and proliferate actively on the nanofiber mesh, and differentiate into osteoblastic cells with excellent osteogenic potential. The bioactive nanofibers have been further exploited in various forms, such as bundled filament, nanofibrous membrane, 3D macroporous scaffold, and nanocomposite with biopolymer, suggesting their versatility and potential applications in bone‐tissue engineering. Based on this study, the bioactive nanofibrous matrix is regarded as a promising next‐generation biomaterial in the bone‐regeneration field.     

Self‐Healing Graphene Oxide Based Functional Architectures Triggered by Moisture

Self‐healing materials are capable of spontaneously repairing themselves at damaging sites without additional adhesives. They are important functional materials with wide applications in actuators, shape memorizing materials, smart coatings, and medical treatments, etc. Herein, this study reports the self‐healing of graphene oxide (GO) functional architectures and devices with the assistance of moisture. These GO architectures can completely restore their mechanical‐performance (e.g., compressibility, flexibility, and strength) after healing their broken sites using a little amount of water moisture. On the basis of this effective moisture‐triggered self‐healing process, this study develops GO smart actuators (e.g., bendable actuator, biomimetic walker, rotatable fiber motor) and sensors with self‐healing ability. This work provides a new pathway for the development of self‐healing materials for their applications in multidimensional spaces and functional devices.     

Cocrystal Strategy toward Multifunctional 3D‐Printing Scaffolds Enables NIR‐Activated Photonic Osteosarcoma Hyperthermia and Enhanced Bone Defect Regeneration

Malignant bone tumors are one of the major serious diseases in clinic. Inferior reconstruction of new bone and rapid propagation of residual tumor cells are the main challenges to surgical intervention. Herein, a bifunctional DTC@BG scaffold for near‐infrared (NIR)‐activated photonic thermal ablation of osteosarcoma and accelerated bone defect regeneration is engineered by in situ growth of NIR‐absorbing cocrystal (DTC) on the surface of a 3D‐printing bioactive glass (BG) scaffold. The prominent photothermal conversion performance and outstanding bone regeneration capability of DTC@BG scaffolds originate from the precise tailoring of the bandgap between the electron donors and acceptors of DTC and promote new bone growth performance of BG scaffolds. DTC@BG scaffolds not only significantly promote tumor cell ablation in vitro, but also effectively facilitate bone tumor suppression in vivo. In particular, DTC@BG scaffolds exhibit excellent capability in stimulating osteogenic differentiation and angiogenesis, and finally promote newborn bone formation in the bone defects. This research represents the first paradigm for ablating osteosarcoma and facilitating new bone formation through precise modulation of electron donors and acceptors in the cocrystal, which offers a new avenue to construct high‐efficiency therapeutic platforms based on cocrystal strategy for ablation of malignant bone tumor.     

Three Dimensional Graphene Foam/Polymer Hybrid as a High Strength Biocompatible Scaffold

Graphene foam (GrF)/polylactic acid–poly‐ε‐caprolactone copolymer (PLC) hybrid (GrF‐PLC) scaffold is synthesized in order to utilize both the desirable properties of graphene and that of foams such as excellent structural characteristics and a networked 3‐D structure for cells to proliferate in. The hybrid scaffold is synthesized by a dip‐coating method that enables retention of the porous 3D structure. The excellent wettability of PLC with graphene foam along with the formation of PLC bridges leads to a ≈3700% enhancement in strength and a ≈3100% increase in ductility in the GrF‐PLC scaffold. Biocompatibility of both graphene foam and GrF‐PLC scaffold is demonstrated by culturing of human mesenchymal stem cells (hMSCs) for 28 days, a period over which cell proliferation is robust. The hMSCs are differentiated in chondrogenic media and supported chondrogenesis in both scaffolds. The demand for aggrecan extracellular matrix protein synthesis is reduced in hybrids due to improved bearing of cell‐induced loads, this may be critical for ensuring adequate cellular distribution and layering of extracellular matrix. Hence, the unique mechanical and biotolerant properties of the GrF‐PLC scaffold are suited for musculoskeletal tissue engineering applications, such as the growth of de novo cartilage to replace cartilage lost due to injury or osteoarthritis.     

Citrate‐Based Tannin‐Bridged Bone Composites for Lumbar Fusion

Conventional bone composites consistently fail to mimic the chemical composition and integrated organic/inorganic structure of natural bone, lacking sufficient mechanics as well as inherent osteoconductivity and osteoinductivity. Through a facile surface coating process, the strong adhesive, tannic acid (TA), is adhered to the surface of the natural bone component, hydroxyapatite (HA), with and without the immobilization of in situ formed silver nanoparticles. Residual functional groups available on the immobilized TA substituents are subsequently covalently linked to the citrate‐based biodegradable polymer, poly(octamethylene citrate) (POC), effectively bridging the organic and inorganic phases. Due to the synergistic effects of the tannin and citrate components, the obtained citrate‐based tannin‐bridged bone composites (CTBCs) exhibit vastly improved compression strengths up to 323.0 ± 21.3 MPa compared to 229.9 ± 15.6 MPa for POC‐HA, and possess tunable degradation profiles, enhanced biomineralization performance, favorable biocompatibility, increased cell adhesion and proliferation, as well as considerable antimicrobial activity. In vivo study of porous CTBCs using a lumbar fusion model further confirms CTBCs' osteoconductivity and osteoinductivity, promoting bone regeneration. CTBCs possess great potential for bone regeneration applications while the immobilized TA additionally preserves surface bioconjugation sites to further tailor the bioactivity of CTBCs.     

3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self‐Fitting Capability and Tailorable Gradient for Bone Regeneration

Repair of bone defects with irregular shapes or at soft tissue insertion sites faces a huge challenge. Scaffolds capable of adapting to bone cavities, generating stiffness gradients, and inducing osteogenesis are necessary. Herein, a superelastic 3D ceramic fibrous scaffold is developed by assembly of intrinsically rigid, structurally flexible electrospun SiO₂ nanofibers with chitosan as bonding sites (SiO₂ NF‐CS) via a lyophilization technique. SiO₂ NF‐CS scaffolds exhibit excellent elasticity (full recovery from 80% compression), fast recovery rate (>500 mm min^?1), and good fatigue resistance (>10 000 cycles of compression) in an aqueous medium. SiO₂ NF‐CS scaffolds induce human mesenchymal stem cell (hMSC) elongation and differentiation into osteoblasts. In vivo self‐fitting capability is demonstrated by implanting compressed SiO₂ NF‐CS scaffolds into different shaped mandibular defects in rabbits, with a spontaneous recovery and full filling of defects. Rat calvarial defect repair validates enhanced bone formation and vascularization by cell (hMSC) histomorphology analysis. Further, subchondral bone scaffolds with gradations in SiO₂ nanofibers are developed, leading to a stiffness gradient and spatially chondrogenic and osteogenic differentiation of hMSCs. This work presents a type of 3D ceramic fibrous scaffold, which can closely match bone defects with irregular shapes or at different implant sites, and is promising for clinical translation.     

High‐Efficiency Water‐Transport Channels using the Synergistic Effect of a Hydrophilic Polymer and Graphene Oxide Laminates

Graphene oxide (GO) laminates possess unprecedented fast water‐transport channels. However, how to fully utilize these unique channels in order to maximize the separation properties of GO laminates remains a challenge. Here, a bio‐inspired membrane that couples an ultrathin surface water‐capturing polymeric layer (<10 nm) and GO laminates is designed. The proposed synergistic effect of highly enhanced water sorption from the polymeric layer and molecular channels from the GO laminates realizes fast and selective water transport through the integrated membrane. The prepared membrane exhibits highly selective water permeation with an excellent water flux of over 10 000 g m^?2 h^?1, which exceeds the performance upper bound of state‐of‐the‐art membranes for butanol dehydration. This bio‐inspired strategy demonstrated here opens the door to explore fast and selective channels derived from 2D or 3D materials for highly efficient molecular separation.     

Magnesium Gradient-Based Hierarchical Scaffold for Dual-Lineage Regeneration of Osteochondral Defect

Osteochondral regeneration remains a great challenge due to the limited self-healing ability and the complexity of its hierarchical structure and composition. Mg²⁺ and hypoxia are two effective modulators in boosting chondrogenesis. To this end, a double-layered scaffold (D) consisting of a hydrogel layer on a porous cryogel is fabricated to mimic the hierarchical structure of osteochondral tissue. An Mg²⁺ gradient is incorporated into the double-layered scaffold with hypoxia-mimicking deferoxamine (DFO) embedded in the hydrogel (D-Mg-DFO), which remarkably augments the dual-lineage regeneration of both cartilage and subchondral bone. The higher Mg²⁺ supplementation from the upper hydrogel, associated with its hypoxia-mimicking situation and small pore size, exhibits promotive effects on chondrogenic differentiation. The lower Mg²⁺ supplementation from the bottom cryogel, associated with its interconnected macroporous structure, achieves multiple contributions in stem cell migration from bone marrow cavity, matrix mineralization, and osteogenesis. Furthermore, rabbits’ trochlea osteochondral defects are established to evaluate the regenerative outcome. Compared to control scaffolds containing only Mg²⁺ or DFO, the D-Mg-DFO scaffold presents the best regenerative effect under the synergistic contribution of multiple factors. Overall, this work provides a new design of scaffold toward an effective repair of cartilage defect.     

Hydrogen generation due to decomposition of carboxym ethyl-cellulose in muddy water

The letter describes a novel hydrogen generation phenomenon observed for carboxymethyl-cellulose (CMC), used as a typical material for water-swellable tape in waterproof optical cable. A graded-index optical fibre set in CMC solution containing muddy water exhibits optical loss increase due to hydrogen gas generation, and the viscosity of the CMC solution decreases because of micro-organism decomposition.     

Organometal Trihalide Perovskites with Intriguing Ferroelectric and Piezoelectric Properties

Organometal trihalide perovskites (OTPs) as a new subclass of perovskite materials have recently aroused increasing interest due to their numerous advantages of facile low‐temperature processing, tunable bandgaps, diverse compositions, and superior charge transfer dynamics, which have been widely used in various applications. In particular, solar cells composed of these perovskites have made unprecedented progress in just a few years with maximum power conversion efficiency, evolving from 3.8 to 21.6%. In spite of such impressive achievement, a fundamental understanding of intrinsic optoelectronic and physiochemical properties is a key challenge impeding the development of the OTPs. This review article aims to provide a concise overview of the current status of OTPs research, highlighting the unique properties of OTPs, especially ferroelectric and piezoelectric properties, which are vital to photovoltaic and piezoelectric applications but still not adequately explained. Various material synthesis strategies of OTPs are surveyed, exhibiting that the OTPs architecture can serve as a promising and robust platform for opening new horizons in ferroelectric and piezoelectric researches. Several applications, including piezoelectric generators, solar cells, light‐emitting diodes, lasers, photodetectors, and water‐splitting cells, demonstrate the latent potentialities of OTPs.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Efficiency and Stability Enhancement in Perovskite Solar Cells by Inserting Lithium‐Neutralized Graphene Oxide as Electron Transporting Layer

This work proposes a new perovskite solar cell structure by including lithium‐neutralized graphene oxide (GO‐Li) as the electron transporting layer (ETL) on top of the mesoporous TiO₂ (m‐TiO₂) substrate. The modified work‐function of GO after the intercalation of Li atoms (4.3 eV) exhibits a good energy matching with the TiO₂ conduction band, leading to a significant enhancement of the electron injection from the perovskite to the m‐TiO₂. The resulting devices exhibit an improved short circuit current and fill factor and a reduced hysteresis. Furthermore, the GO‐Li ETL partially passivates the oxygen vacancies/defects of m‐TiO₂ by resulting in an enhanced stability under prolonged 1 SUN irradiation.