ATM and AAL layer issues concerning multimedia applications

This paper presents an overview of the facilities that should be provided by theAtm layer and the adaptation layer (Aal) in order to support multimedia communications. From the analysis of data flows generated by well known multimedia applications and the services that could be offered byAtm networks both in the public and the private domain, we propose solutions enabling the availability of such applications onAtm networks taking into account both economical andQos parameters.     

Application level active network (alan) server management architecture

This paper presents the details of the policy-based security and resource management architecture for Application Level Active Network (alan) servers.alan is an active network architecture which enables deployment of user-customised processes (proxylets), which enhance the existing services or introduce new services to the end-user, on the select group of servers in anip network. The issues of security and resource management in this scenario are of crucial importance so as to efficiently facilitate and control the resource consumption of user-specified processes on the active servers, as well as to protect the server platforms from unauthorised proxylet deployment or malevolent behaviour. The architecture allowing efficient resource and security control is presented in this paper, including detaileduml diagrams capturing the management functionality, as well as a set of concrete management policies for thealan scenario. The examplexml policies are also given, and the deployment of this architecture in real-life trials is described. This development forms a part of a larger management architecture foralan-enabled networks developed in the context of theist projectandroid (Active Network DistRibuted Open Infrastructure Development).     

Multimedia communication in wireless sensor networks

The technological advances in Micro ElectroMechanical Systems (Mems) and wireless communications have enabled the realization of wireless sensor networks (Wsn) comprised of large number of low-cost, low-power, multifunctional sensor nodes. These tiny sensor nodes communicate in short distances and collaboratively work toward fulfilling the application specific objectives ofWsn. However, realization of wide range of envisionedWsn applications necessitates effective communication protocols which can address the unique challenges posed by theWsn paradigm. Since many of these envisioned applications may also involve in collecting information in the form of multimedia such as audio, image, and video; additional challenges due to the unique requirements of multimedia delivery overWsn, e.g., diverse reliability requirements, time constraints, high bandwidth demands, must be addressed as well. Thus far, vast majority of the research efforts has been focused on addressing the problems of conventional data communication inWsn. Therefore, there exists an urgent need for research on the problems of multimedia communication inWsn. In this paper, a survey of the research challenges and the current status of the literature on the multimedia communication inWsn is presented. More specifically, the multimediaWsn applications, factors influencing multimedia delivery overWsn, currently proposed solutions in application, transport, and network layers, are pointed out along with their shortcomings and open research issues.     

Design and performance of a product code turbo encoding-decoding prototype

This paper presents the latest results on a block turbo decoder design. We propose a block turbo decoder circuit for the error protection of small data blocks such asAtm cells on anAwgn (additive white Gaussian noise) channel with a code rate close to 0.5. A prototype was developed atEnst Bretagne. It allowsBer (bit error rate) measurements down to 10^?9 and uses programmable gate arrays (Fpga Xilinx circuits). The elementary extendedBch code and the data block size can be modified to fit specifications of different applications.     

Tutorial on active networks and their management

Active networking is an expanding field of research. It includes the ability to easily install and modify customized network services and to process packets within the network in a customized way. This paper overviews active networking approaches and their management. It is meant more as a tutorial or survey like paper, than mostly undefinite or unpublished concepts and approaches. It classifies different approaches to active networking on various criteria. Furthermore, some applications, or better application areas, may profit from active network technology. The second part addresses the question of how the benefits of active networking can be exploited in an environment, where a number of customers must share a common network infrastructure also referred to as telecom environment in this paper. And it also lists possible drawbacks of the technology. In the third part, we introduce a management framework for active networks that allows customers to deploy and manage their own active services in a provider domain. The key concept in our framework is the Virtual Active Network (Van). From the customer’s perspective, theVan represents the environment in which the customer can install, run, and manage active services without interaction with theVan provider. From theVan provider’s perspective theVan represents the object of resource partitioning and customer isolation. Active networking combined with theVan concept allows for new business models in the telecom industry.     

Business opportunities throughUMTS-WLAN networks

This article outlines the economic feasibility of mobile operators that combine nationwide mobility with 3G networks and hot spot coverage withWLANS, WLANS are based onHIPERLAN/2 architecture and theUMTS network exploitswCDMA/FDD technology. The evaluated business scenarios are focused on two different deployment areas, in terms of demographic characteristics and mobile penetration: a large and a small European country. The business case spans 2002 to 2011 withUMTS’ roll-out year in 2002 andWLAN’s in 2004, covering indoor hot-spot areas (stations, airports, stadiums, etc.) where demand is high. The demand for thisUMTS-WLAN roaming case is evaluated based on observations from Europe’s current mobile market and its evolution. Usage scenarios of different service packages corresponding to both residential and business markets have been taken into account. Direct investments and operational costs as well as revenue streams from traffic have been calculated. The methodology and the tool developed inACTS-TERA [1] andIST-TONIC [2] projects have been utilized for this case study. Economic conclusions have been derived, presented and discussed using key profitability factors. Profitability for all scenarios and business profiles has been calculated, presented and discussed. It includes a sensitivity analysis in order to identify the major opportunities and threats, for specific service sets as well as critical parameters and uncertainties. A wide audience from mobile operators and service providers to retail companies interested in entering the 3G market, can exploit this information.     

Transport layer statistical multicast based on the XTP bucket algorithm

Multicast or point-to-multipoint transmission is becoming a major issue for supporting distributed multimedia applications. In this paper, we analyze the service provided by theXtp reliable multicast. We discover several problems and drawbacks, such as multiple retransmission of the same data packets or the protocol inefficiency when performing with large group size and non-broadcast networks. To overcome some of these problems, we introduce new constraints at the sender side to prevent any unnecessary retransmissions. We introduce the service semantic calledstatistical reliable to cope with large group size while keeping a high level of reliability (related to error recovery issues). The quality of service provided by this modified protocol is assessed by simulation experiments for two different network environments :Fddi andAtm. We show that the reliability is almost binary, i.e. all reliable or unreliable at all. If the parameters are correctly sized, we can expect to get an all reliable semantic while using the statistical reliable protocol with the benefit of low protocol overhead. We are now working on a modified version of the proposed protocol to specifically adressAtm based networks.     

Mastering quality of service in GPRS/UMTS an overview

Quality of Service (QoS) has become a very important issue in networking, covering many performance aspects and numerous measures. The deployment of next generation wireless system includes 2.5G General Packet Radio Service (Gprs), which is the packet-switched extension of the Global System for Mobile communications (Gsm), and Third-Generation (3G) Universal Mobile Telecommunications System (Umts) to meet the needs of larger capacity and higher bit rates. AnUmts packet core network is an IP-based network. The Internet Engineering Task Force (Ietf) Forum developed several IP QoS related mechanisms available for IP transport networks. Service Quality Management (Sqm), one component of Telecommunication Management Network (Tun), will enable providers to manage QoS against objectives set out in customer Service Level Agreements (Slas) and will enable customers to compare the service offerings of different service providers.     

Network-controlled mobility within radio access networks based onWLAN technologies

This article presents a network-controlled approach of user terminal mobility within anIP based WirelessLAN Access Network. In a first part, this article makes a review of the mobility support, on the subject of emergingWLAN technologies asHIPERLAN/2 andIEEE 802.11, on the one hand, and, regardingIP networks as currently studied withinIETF, on the other hand. Both types ofIP mobility protocols are presented, either global mobility protocols such as MobileIP, or local mobility management protocols (micro mobility). In the next part, the overall principles of our mobility management approach are explained; this approach is based on the implementation of a new network entity dedicated to the control of user terminal mobility. The last part details a practical implementation of this approach. The implementation is carried out on the basis of Hierarchical MobileIPv6 (HMIPv6). The experimental results confirm the importance to carefully plan and control the user terminal mobility within largeIP based Access Networks, as this brings benefit to the user as well as to the operator.     

Rogue-base station detection in WiMax/802.16 wireless access networks

We address the problem of detecting a rogue base station (Bs) in WiMax/802.16 wireless access networks. A rogueBs is a malicious station that impersonates a legitimate access point (Ap). The rogueBs attack represents a major denial-of-service threat against wireless networks. Our approach is based on the observation that inconsistencies in the signal strength reports received by the mobile stations (Mss) can be seen if a rogueBs is present in a network. These reports can be assessed by the legitimate base stations, for instance, when a mobile station undertakes a handover towards anotherBs. Novel algorithms for detecting violations of received signal strength reports consistency are described in this paper. These algorithms can be used by an intrusion detection system localized on the legitimateBss or on a global network management system operating theBss.     

Optimizing IP networks in a hybrid IGP/MPLS environment

In this paper, we consider a traffic engineering (te) approach toip networks in a hybridigp/mpls environment. Thoughigp (Interior Gateway Protocol) routing has proven its scalability and reliability, effective traffic engineering has been difficult to achieve in public IP networks because of the limited functional capabilities of conventionalip technologies.mpls (Multi-Protocol Label Switching) on the one hand enhances the possibility to engineer traffic onip networks by allowing explicit routes. But on the other hand it suffers from the scalability (n-square) problem. Hybridigp/mpls approaches rely onip native routing as much as possible and usempls only if necessary. In this work we propose a novel hybrid traffic engineering method based on genetic algorithms, which can be considered as an offlinete approach to handle long or medium-term traffic variations in the range days, weeks or months. In our approach the maximum number of hops anlsp (Label Switched Path) may take and the number oflsps which are applied solely to improve the routing performance, are treated as constraints due to delay considerations and the complexity of management. We apply our method to the German scientific network (b-win) for which a traffic matrix is available and also to some other networks with a simple demand model. We will show results comparing this hybridigp/mpls routing scenario with the result of pureigp routing and that of a full meshmpls with and without traffic splitting.     

Mobility-awareness in group key management protocols within MANETs

Several sensitive applications deployed within wireless networks require group communications. A high level of security is often required in such applications, like military or public security applications. The most suitable solution to ensure security in these services is the deployment of a group key management protocol, adapted to the characteristics ofManets, especially to mobility of nodes. In this paper, we present theOmct (Optimized Multicast Cluster Tree) algorithm for dynamic clustering of multicast group, that takes into account both nodes localization and mobility, and optimizes the energy and bandwidth consumptions. Then, we show how we integrateOmct within our group key management protocolBalade, in a sequential multi-source model. The integration ofBalade andOmct allows an efficient and fast key distribution process, validated through simulations, by applying various models of mobility (individual mobility and group mobility). The impact of the mobility model on the performance and the behaviour of the group key management protocolBalade coupled withOmct, is also evaluated.     

Reactive congestion control algorithm in an ATM node

This paper discusses the congestion phenomenon on anAtm node and presents an analytical approach to follow the cumulated delays on the network. It proposes an adaptation algorithm of the sources rate with the evolving congestion state of a node by a reactive approach.     

Europeanist-programme roadmap for optical communications generated by theoptimist thematic network

On the basis of Europeanist project results in the field of photonics, theoptimist thematic network has produced a roadmap for optical communications. This work is described in the present article which provides scenarios for the evolution of the optical network in the coming 10 years. Predictable developments in optical components, sub-systems and systems and their consequences on the architecture and performances of the networks are analysed. Specific interest is focused on the various parts of the network structure namely the access, the metropolitan area, the wide area and the global networks. Technical documents elaborated by theoptimist consortium and minutes fromist workshops can be found on the website http://www.ist-optimist.org/.[1]. They constitute a main source for further information.     

Parallel interference cancellation efficiency for noisy signals in O-CDMA system

The aim of this paper is to evaluate the robustness of Parallel Interference Cancellation (Pic) to noise contribution for an optical Code Division Multiple Access system. The theoretical expression of thePic error probability is developed in the case of white additive Gaussian noise. From theoretical analysis, we show that, even with noise contribution, thePic receiver outperforms the Conventional Correlation Receiver (Ccr). Moreover, the results highlight that, for a given performance, thePic receiver relaxes not only the constraint on the code length, but also the Signal to Noise Ratio compared toCcr. Particularly, this is proofed in access network context, i.e. 30 users withBer lt; 10^?9.     

Iterative successive interference cancellation for multi-user DS/CDMA detectors in multipath channels

This paper deals with uplink Direct-Sequence Code Division Multiple Access (DS-CDMA) transmissions over mobile radio channels. A new interference cancellation scheme for multiuser detection, calledSIC/RAKE, is presented. It is based on a modified multistage Successive Interference Cancellation (sic) structure that enables efficient detection in multipath propagation environments, thanks to a single userRAKE receiver incorporated in each unit of thesic structure. Furthermore, a modified version of thesic structure, calledSIC/MMSE, that ensures convergence to theMMSE detector rather than to the decorrelating detector has been suggested. The convergence of theSIC/RAKE andSIC/MMSE methods is proved. Simulation results for the Universal Mobile Telecommunication System (UMTS) have been carried out for flat fading Rayleigh multipath channels, showing that the proposed detector is resistant to the near-far effect and that low performance loss is obtained compared to the single-user bound.     

Strong and privacy-friendly management of federated identities for service provision over UMTS

Mobile subscribers who wish to mutually authenticate to service providers on the Internet utilize existing identity management mechanisms, such as Microsoft .net passport, overlooking the existing trust relationship between the subscriber and the 3G mobile operator and increasing network resources consumption, in an environment that requires security mechanisms that are as lightweight as possible. Furthermore, knowledge as well as the possession of an item, does not distinguish a person uniquely, revealing an inherent security weakness of pin authentication mechanisms. This paper proposes a protocol (3GbioId) for implementing strong identity management for Internet applications over 3G mobile networks. 3GBioId introduces biometrics, as well as the principles of the Liberty Alliance, into the 3G mobile security architecture, targeting to a more effective, secure and lightweight identity management alternative to the existing protocols. The results of a security, privacy, performance, usability and complexity evaluation indicate 3GbioId’s benefits and limits.     

Architecture d’un réseau actif à base de services Web

This paper presents a novel active architecture for building and deploying network services:aswa, Web Services based Active network Architecture. At the architectural level,aswa defines an active node whose functionalities are divided into the Node Operating System, the Execution Environment, and the Active Applications. At the implementation level,aswa is a Web Services based platform where new components could be added and deployed, in order to dynamically modify network nodes behavior. Applications can be developed with any language and communicate across heterogeneous environments, and across Internet and Intranet structures. At the deployment levelaswa uses an active node approach, and offers a controlled deployment mode. In terms of security, Authentication of deployed code and protection of the nodes is achieved by the use ofhttps and the header extensions of thesoap envelope. Finally to validate this architecture,aswa defines a Firewall as an Active Application to secure the code deployment.     

Un environnement de conception de systèmes distribués basé sur UML

This paper introduces a new environment for developing distributed systems. It is based on theTurtle uml profile. Analysis and design phases, described in previous papers, have been extended with an additional deployment phase. In this new step,Turtle components are deployed over hardware execution nodes, and nodes are connected together throughout links,Turtle deployment diagrams are given a formal semantics inRt-lotos, therefore following the approach used forTurtle analysis and design diagrams. Moreover, the paper presents a Java code generator which outputs appropriate Java code forTurtle deployment diagrams. This code is automatically deployable on networks because it implements node communication using network protocols such asUdp orRmi. ttool, the turtle toolkit has been extended to support these new diagrams and code generators. The attack of protected data exchanged throughout securedHttp sessions serves as example.     

Optimisation de la quantification vectorielle codée par treillis: application au codage des paramètres LSF

Speech coders operating at low bit rates necessitate efficient encoding of the linear predictive coding (Lpc) coefficients. Line spectral Frequencies (Lsf) parameters are currently one of the most efficient choices of transmission parameters for theLpc coefficients. In this paper, an optimized trellis coded vector quantization (Tcvq) scheme for encoding theLsf parameters is presented. When the selection of a proper distortion measure is the most important issue in the design and operation of the encoder, an appropriate weighted distance measure has been used during theTcvq construction process. We further applied the optimizedTcvq system for encoding theLsf parameters of the us Federal Standard (Fs1016) 4.8 kbps speech coder. At lower bit rates, objective and subjective evaluation results show that the incorporatedLsf tcvq encoder performs better than the 34 bits/frameLsf scalar quantizer used originally in the fs1016 coder. The subjective tests reveal also that the 27 bit/frame scheme produces equivalent perceptual quality to that when theLsf parameters are unquantized.