光通信中基于有限域加群的一种QC-LDPC码

针对光通信系统传输特性要求的日益提高,基于有限域GF(q)加群提出了一种构造简单且适合光通信系统的新颖准循环低密度奇偶校验(QC-LDPC)码构造方法,该构造方法可灵活的调整码长、码率且其编译码复杂度低。用此方法构造了适用于光通信系统的规则QC-LDPC(4599,4307)码。仿真结果表明,在BER=10-7时且码率均为93.7%的情况下,所构造的QC-LDPC(4599,4307)码的净编码器增益(NCG)比已广泛应用于光通信系统中的经典RS(255,239)码提高了约2.2dB,比用SCG构造方法构造的SCG-LDPC(3969,3720)码和非规则的QC-LDPC(3843,3603)码的NCG分别提高了约0.47dB和0.25dB,距离香农限约1dB。因而其纠错性能更强,更适用于高速长距离光通信系统。     

光通信中基于BIBD与循环矩阵分解的QC-LDPC码新颖构造方法

为了满足光通信系统中对纠错码高码率、低误码率(EBR)的要求,基于平衡不完全区组设计(BIBD)和循环矩阵分解,提出一种构造简单的新颖准循环低密度奇偶校验(QC-LDPC)码构造方法,并构造了适用于光通信系统的规则BIBDdes-QC-LDPC(6736,6316)码。仿真结果表明,在BER=10-6时其码率均为93.7%的情况下,所构造的BIBDdes-QC-LDPC(6736,6316)码的净编码增益(NCG)比已广泛应用于光通信系统中的经典RS(255,239)码改善了约2.2dB,并且比只基于BIBD所构造的同码率同码长的规则BIBD-QC-LDPC(6736,6315)和基于伽罗华域(GF)乘群所构造的同码率的非规则QC-LDPC(3843,3603)码都分别改善了约0.2dB。因而,运用本文方法构造的QC-LDPC码型的纠错性能更强,更适用于高速长距离光通信系统。并且,本文方法还具有BIBD构造方法的优点,可灵活地调整码率码长。     

光通信中一种基于有限域的QC-LDPC码构造方法分析

针对光通信系统日益发展的需要,提出了一种的基于有限域准循环低密度奇偶校验(QC-LDPC)码的构造方法.该构造方法简单易行,可以有效避免四环的出现,具有良好的围长特性,同时能够自由地选择码长码率.仿真分析表明:通过该构造方法所构造的码率为93.7％的QC-LDPC(3780,3540)码的纠错性能优于利用随机构造方法所构造的SCG-LDPC (3969,3720)码和已广泛用于ITU-T G.975中的RS(255,239)码和ITU-T G.975.1中的LDPC(32640,30592)码,因而其更适合于光通信系统.     

光通信系统中基于伽罗华域乘群的QC-LDPC码的一种新颖构造方法

基于Galois域GF(q)乘群,提出了一种构造简单且编码容易实现的新颖准循环低密度奇偶校验(QC-LDPC)码构造方法,可灵活地调整码长、码率,且编译码复杂度低。用本文方法构造了适用于光通信系统的非规则QC-LDPC(3843,3603)码,仿真表明,与已广泛用于光通信系统中的经典RS(255,239)码相比,用本文方法构造的码具有更好的纠错性能,且其性能优于用SCG方法构造的LDPC码和规则的QC-LDPC(4221,3956)码,适合用于高速长距离光通信系统。     

一种光通信中基于LDPC码的新颖级联码

基于SCG(4,k)码的构造方法对SCG-LDPC码进行优化改进,构造一种适用于光通信系统的新颖LDPC(3969,3720)码,通过增大其码长,构造码率为95.1%的新颖SCG-LDPC(6561,6240)码,使其码率更符合光通信系统的高码率要求。并用SCG-LDPC(6561,6240)码与码率为94.5%的BCH(127,120)码进行级联,构造出一种新颖的BCH(127,120)+LDPC(6561,6240)级联码。仿真分析表明:在误码率为10-7时,新构造的BCH(127,120)+LDPC(6561,6240)级联码的净编码增益比已广泛应用于光通信系统的经典RS(255,239)码和SCG-LDPC(6561,6240)码分别提高了2.27dB和0.49dB。因而该级联码更适合于光通信系统。     

一种基于修饰技术的改进QC-LDPC码构造方法

基于修饰技术提出了一种改进的准循环低密度奇偶校验(QC-LDPC)码的构造方法.该方法构造的QC-LDPC码具有较低的编码复杂度,其校验矩阵围长至少为6,避免了四环的出现,具有良好的围长特性.仿真分析表明:通过该构造方法构造的码率为93.7％的QC-LDPC(3969,3717)码在降低其编码复杂度的情况下,拥有与其对应的未应用修饰技术的QC-LDPC(3969,3719)码相媲美的纠错性能;并且在相同条件下,QC-LDPC(3969,3717)码的纠错性能要好于利用随机构造方法构造的PEG-LDPC (3969,3720)码,以及ITU-T G.975中已广泛用于光通信系统中的RS(255,239)码和LDPC(32640,30592)码,更适合于光通信系统.     

光通信中一种基于有限域循环子群的QC-LDPC码构造方法

基于有限域循环子群方法提出了一种结构简单,可以灵活选择码长、码率,并且编译码复杂度低的准循环低密度奇偶校验(QC-LDPC)码构造方法。利用此方法构造出适合光通信系统传输的规则QC-LDPC(5334,4955)码。仿真结果表明该码型利用和积迭代译码算法在加性高斯白噪声信道中取得了很好的性能,比已广泛应用于光通信中的经典RS(255,239)码具有更好的纠错性能。因此所构造的QC-LDPC(5334,4955)码能较好地适用于高速长距离光通信系统。     

一种高速长距离光通信系统中QC-LDPC码的构造方法

提出了一种新的准循环低密度奇偶校验(QC-LDPC)码的构造方法,给出了用该方法构造无环四QC-LDPC码的充分条件。并针对光通信系统的传输特点,用此方法构造了适用于高速长距离光通信系统的QC-LDPC(4 221,3 956)码。仿真结果分析表明:在码率为93.7%、误码率BER为10-6时,与广泛用于光通信系统中的经典RS(255,239)码相比,其净编码增益(NCG)提高了约1.8dB;比SCG-LDPC(3 969,3 720)码的NCG提高了约0.2dB,距离香农极限约1.4dB,且远低于PEG-LDPC(4 221,3 956)码的错误平层,这正满足光通信系统中低错误平层的要求。     

光通信中基于伽罗华域的QC-LDPC码构造方法

为了满足光通信系统对纠错码高码率、低误码率的要求,基于伽罗华域中域的特征提出了一种结构简单、易于编码并且可以有效避免四环的 QC-LDPC(准循环低密度奇偶校验)码的新构造方法。并运用该方法构造了适用于光通信系统的 FC-QC-LDPC(基于域特征的 QC-LDPC)(3969,3729)码。仿真结果表明,在误码率=10-7时,所构造的码率为0.937的 FC-QC-LDPC(3969,3729)码的 NCG (净编码增益)比 QC-LDPC(4288,4020)码提高了约0.15 dB,比 Linshu-QC-LDPC(3780,3542)码和经典的 RS(255,239)码的 NCG分别提高了约0.35和2.1 dB。此外,所构造的码的性能与 Mackay码的性能相当。因而其纠错性能更强,更适用于高速长距离光通信系统。     

可见光通信中一种围长为8的QC-LDPC码构造方法

为了提高可见光通信(Visible Light Communication,VLC)系统的性能,基于Hoey序列提出了一种围长为8的准循环低密度奇偶校验(Quasi-Cyclic Low-Density Parity-Check,QC-LDPC)码的新颖构造方法。用该方法构造的QC-LDPC码不含4、6环,且可灵活选择不同码率。然后用所提出的构造方法构造了码率为0.5的Hoey-QC-LDPC(1536,8)码,并运用所搭建的VLC系统仿真模型对其进行了仿真性能分析。仿真结果表明,在误码率(Bit Error Rate,BER)为10-6时,该Hoey-QC-LDPC(1536,8)码与同码率的基于最大公约数(Greatest Common Divisor,GCD)算法构造的GCD-QC-LDPC(1540,0)码、采用滑动矩形窗口(Slide Rectangular Window,SRW)构造的SRW-QC-LDPC(1540,0)码以及基于卢卡斯数列(Lucas Sequences,LS)构造的LS-QC-LDPC(1536,8)码相比,其净编码增益(Net Coding Gain,NCG)分别提高了0.50、0.56与1.09dB。     

A novel construction method of QC-LDPC codes based on the subgroup of the finite field multiplicative group for optical transmission systems

According to the requirements of the increasing development for optical transmission systems, a novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes based on the subgroup of the finite field multiplicative group is proposed. Furthermore, this construction method can effectively avoid the girth-4 phenomena and has the advantages such as simpler construction, easier implementation, lower encoding/decoding complexity, better girth properties and more flexible adjustment for the code length and code rate. The simulation results show that the error correction performance of the QC-LDPC(3 780,3 540) code with the code rate of 93.7% constructed by this proposed method is excellent, its net coding gain is respectively 0.3 dB, 0.55 dB, 1.4 dB and 1.98 dB higher than those of the QC-LDPC(5 334,4 962) code constructed by the method based on the inverse element characteristics in the finite field multiplicative group, the SCG-LDPC(3 969,3 720) code constructed by the systematically constructed Gallager (SCG) random construction method, the LDPC(32 640,30 592) code in ITU-T G.975.1 and the classic RS(255,239) code which is widely used in optical transmission systems in ITU-T G.975 at the bit error rate (BER) of 10^-7. Therefore, the constructed QC-LDPC(3 780,3 540) code is more suitable for optical transmission systems.     

A novel QC-LDPC code based on the finite field multiplicative group for optical communications

A novel construction method of quasi-cyclic low-density parity-check(QC-LDPC) code is proposed based on the finite field multiplicative group,which has easier construction,more flexible code-length code-rate adjustment and lower encoding/decoding complexity.Moreover,a regular QC-LDPC(5334,4962) code is constructed.The simulation results show that the constructed QC-LDPC(5334,4962) code can gain better error correction performance under the condition of the additive white Gaussian noise(AWGN) channel with iterative decoding sum-product algorithm(SPA).At the bit error rate(BER) of 10-6,the net coding gain(NCG) of the constructed QC-LDPC(5334,4962) code is 1.8 dB,0.9 dB and 0.2 dB more than that of the classic RS(255,239) code in ITU-T G.975,the LDPC(32640,30592) code in ITU-T G.975.1 and the SCG-LDPC(3969,3720) code constructed by the random method,respectively.So it is more suitable for optical communication systems.     

光传输系统中基于Bose第一类方法对QC-LDPC码的一种新颖构造方法

基于平衡不完全区组设计(BIBD)、循环矩阵分解和循环置换矩阵,提出了一种适用于光传输系统的新颖准循环低密度奇偶校验码(QC-LDPC)构造方法。利用Bose的第一类方法构造的低密度校验矩阵对其进行循环列分解得到相应的模板矩阵,再利用合适的循环置换矩阵对其进行扩展。采用该方法构造的QC-LDPC码具有良好的结构,且可根据实际需要来灵活地选择码长和码率。仿真结果表明:在误码率为10-6时其码率均为93.7%的情况下,该方法构造的novel-QC-LDPC(10992,10305)码比ITU-T G.975中RS(255,239)码的净编码增益(NCG)改善了约1.8d B。因此该构造方法所构造的QC-LDPC码具有更好的纠错性能,更适合高速长距离的光传输系统。     

A novel construction method of QC-LDPC codes based on CRT for optical communications

A novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes is proposed based on Chinese remainder theory (CRT). The method can not only increase the code length without reducing the girth, but also greatly enhance the code rate, so it is easy to construct a high-rate code. The simulation results show that at the bit error rate (BER) of 10-7, the net coding gain (NCG) of the regular QC-LDPC(4 851, 4 546) code is respectively 2.06 dB, 1.36 dB, 0.53 dB and 0.31 dB more than those of the classic RS(255, 239) code in ITU-T G.975, the LDPC(32 640, 30 592) code in ITU-T G.975.1, the QC-LDPC(3 664, 3 436) code constructed by the improved combining construction method based on CRTand the irregular QC-LDPC(3 843, 3 603) code constructed by the construction method based on the Galois field (GF(q)) multiplicative group. Furthermore, all these five codes have the same code rate of 0.937. Therefore, the regular QC-LDPC(4 851, 4 546) code constructed by the proposed construction method has excellent error-correction performance, and can be more suitable for optical transmission systems.     

改进型多元QC-LDPC码的构造及其在PDM-CO-OFDM系统中的应用

位长度相同的多元LDPC(NB-LDPC)码优于相应的二 元LDPC(B-LDPC)码,但是它的实现复杂度相对较高。为了降低NB- LDPC码的实现复杂度,提高系统的编码增益,利用置换多项式的方法对一般多元准循 环LDPC(NB-QC-LDPC)码进行改进,并将改进后的NB-QC-LDPC码应用于基于偏振复用的 相干光正交频分复用(PDM-CO-OFDM)系统中,详细研究了其传输性能。仿真结果表明:基于GF(4) QC-LDPC 编码的系统性能 明显优于相应的B-QC-LDPC编码的系统性能,而且基于改进型GF(4) QC-LDPC编码的 系统与 一般GF(4) QC-LDPC编码的系统相比,其误码性能可改善0.65dB, 频谱效率提高了2.16bit/s/Hz,抑制信道色散能力和运转复杂度也 均得到了改善。     

Construction method of QC-LDPC codes based on multiplicative group of finite field in optical communication

In order to meet the needs of high-speed development of optical communication system, a construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes based on multiplicative group of finite field is proposed. The Tanner graph of parity check matrix of the code constructed by this method has no cycle of length 4, and it can make sure that the obtained code can get a good distance property. Simulation results show that when the bit error rate (BER) is 10-6, in the same simulation environment, the net coding gain (NCG) of the proposed QC-LDPC(3 780, 3 540) code with the code rate of 93.7% in this paper is improved by 2.18 dB and 1.6 dB respectively compared with those of the RS(255, 239) code in ITU-T G.975 and the LDPC(3 2640, 3 0592) code in ITU-T G.975.1. In addition, the NCG of the proposed QC-LDPC(3 780, 3 540) code is respectively 0.2 dB and 0.4 dB higher compared with those of the SG-QC-LDPC(3 780, 3 540) code based on the two different subgroups in finite field and the AS-QC-LDPC(3 780, 3 540) code based on the two arbitrary sets of a finite field. Thus, the proposed QC-LDPC(3 780, 3 540) code in this paper can be well applied in optical communication systems.     

A novel construction scheme of QC-LDPC codes based on the RU algorithm for optical transmission systems

A novel lower-complexity construction scheme of quasi-cyclic low-density parity-check (QC-LDPC) codes for optical transmission systems is proposed based on the structure of the parity-check matrix for the Richardson-Urbanke (RU) algorithm. Furthermore, a novel irregular QC-LDPC(4 288, 4 020) code with high code-rate of 0.937 is constructed by this novel construction scheme. The simulation analyses show that the net coding gain (NCG) of the novel irregular QC-LDPC(4 288,4 020) code is respectively 2.08 dB, 1.25 dB and 0.29 dB more than those of the classic RS(255, 239) code, the LDPC(32 640, 30 592) code and the irregular QC-LDPC(3 843, 3 603) code at the bit error rate (BER) of 10-6. The irregular QC-LDPC(4 288, 4 020) code has the lower encoding/decoding complexity compared with the LDPC(32 640, 30 592) code and the irregular QC-LDPC(3 843, 3 603) code. The proposed novel QC-LDPC(4 288, 4 020) code can be more suitable for the increasing development requirements of high-speed optical transmission systems.