Fractal boundary circularly polarised single feed microstrip antenna

A Koch fractal boundary circularly polarised single feed microstrip antenna is presented. The proposed antenna gives very good circular polarisation with axial ratio close to 0 dB at the centre frequency of 2510 MHz, 3 db axial ratio bandwidth of about 1.6% and impedance bandwidth of 6.2%. Tt is established that it is easy to obtain circular polarisation using the fractal curve as the boundary. The antenna provides about 6 dB gain over the frequency band of operation.     

A novel design of circularly polarised antenna based on metamaterial

This article presents a novel design of circularly polarised microstrip antenna based on a metamaterial reflection plane and a half-wave antenna. The metamaterial is composed of two pieces of substrates coated on one side with split ring resonators. Both the experimental and simulated results show that good circularly polarised radiation performances are obtained. The 10?dB return-loss impedance bandwidth and 3?dB axial ratio bandwidth of proposed antenna are 12% and 7%, respectively, and the gain of proposed antenna compared with the half-wave antenna is improved from 6?dB to 9?dB in the design frequency range.     

Microstrip-fed crossed-slot array antenna

A microstrip-fed crossed-slot array antenna having a circular polarisation is developed. First, a single crossed-slot antenna, that can radiate a circularly polarised wave in the broadside direction, is designed and its coupling level to the microstrip line is analysed. Based on this result, an eight-element crossed-slot array is designed and its characteristics are experimentally investigated at 12 GHz band. The return loss of -17 dB is obtained at the design frequency of 11.85 GHz, and the axial ratio of less than 3 dB is achieved over the fractional bandwidth of 5%.     

Stacked quasi-elliptical patch array with circular polarisation

A simple stacked subarray antenna with circular polarisation is presented. The antenna is based on a quasi-elliptical patch antenna fed with a 45deg offset microstrip line and a circular patch stacked on top of it via an air substrate. The single-element circularly polarised antenna is sequentially rotated into a four-element synchronous subarray resulting in improvement in antenna performance in terms of impedance bandwidth, gain and axial ratio. The antenna is experimentally verified and the results are reported     

Broadband circularly polarised hexagonal slot antenna excited by a tapered microstrip feeder

In this article, a broadband circularly polarised slot antenna fed by a single microstrip line is implemented. The proposed antenna is composed of an unequilateral hexagonal slot to implement circular polarisation and tapered microstrip feeding line to enhance the impedance bandwidth. A conducting reflector is also employed to enhance the antenna gain. The proposed antenna, 60 mm × 60 mm × 18.12 mm in size, was fabricated and tested. The measured??10 dB reflection bandwidth and 3 dB axial ratio bandwidth were 48.9% and 17%, respectively. The measured gain of the fabricated antenna ranged from 5.4 dBi to 6 dBi within an axial ratio bandwidth of 3 dB.     

Low-Cost Broadband Circularly Polarized Printed Antennas and Array

This paper presents the design, simulation, and measurements of two low-cost broadband circularly polarized (CP) printed antennas: an element and an array at 2 GHz. To realize the broadband circularly polarized antenna element, a circular microstrip patch is electromagnetically coupled by crossed slots cut in the ground plane, which is fed by an L-shaped microstrip feed. Two orthogonal modes in the patch are excited by using the crossed slots, and a single L-shaped feed provides a 90deg phase shift between two orthogonal slots. The antenna element achieves a 9.6% bandwidth for an axial ratio (AR) below 3 dB and a voltage standing wave ratio (VSWR) below 1.5. To further improve the performance, a sequentially rotated feed network is designed for a 2 times 2 array. The axial ratio value of the array is below 3 dB within a 27.2% bandwidth, from 1.75 GHz to 2.3 GHz. The return loss is above 10 dB within a 41% bandwidth, from 1.62 GHz to 2.45 GHz. Details of the proposed antenna element and the array design are described, and both the simulation and the experimental results are presented and discussed.     

宽带高增益圆极化微带天线与阵列

设计了一副宽带高增益圆极化微带天线,并进行组阵分析。天线中心频率2.6 GHz,通过增加寄生贴片和空气层来提高天线单元的增益和带宽。上下两层介质板上边长不同的切角方形贴片分别激励一个低频与高频的圆极化模,有效地拓宽了轴比带宽。仿真结果表明,反射系数|S11|<-10 dB带宽21.8%,3 dB轴比带宽12.0%,中心频率点增益9.0 dBi。对天线单元进行加工测试,与仿真结果较为吻合。设计了2×4元阵列,并进行了仿真,增益提升至17.5 dBi,3 dB轴比带宽10.4%。     

Dual-band circularly polarised microstrip antennas with a singlefeed

The authors present a novel technique for obtaining circularly polarised (CP) dual frequency operation by using two spur-link band-stop filters within the perimeter of a microstrip patch antenna with optimum feed point location and aspect ratio. This circularly polarised dual frequency operation can be obtained without increasing either the size or the thickness of the patch. Furthermore, through several experiments the authors also demonstrate that the location of the feed point establishes and controls a trade-off between axial ratio and impedance bandwidth     

Circularly polarised higher-order rectangular dielectric-resonatorantenna

A circularly polarised, rectangular, low-profile, dielectric-resonator antenna is presented which is fed by a 50Ω microstrip line through a single aperture. The measured 3dB axial-ratio bandwidth in the boresight direction is 14.35-14.80 GHz (3%). At 14.75 GHz, the input |s₁₁| is -28 dB; the measured pattern in one elevation plane decreases with increasing &thetas; but the axial ratio is close to 3 dB over 110^c; in the orthogonal elevation plane, the axial ratio increases more rapidly with &thetas;     

Novel Broadband Circularly Polarized Cavity-Backed Aperture Antenna With Traveling Wave Excitation

A novel broadband circularly polarized aperture antenna is presented that uses traveling-wave excitation as the design concept. The antenna configuration consists of a circular radiating aperture, a backed cavity, and an equiangular tapered strip outer-fed by a microstrip transmission line. Operating with a traveling wave excitation, the proposed antenna contains inherent broadband characteristics in terms of the impedance, axial ratio, and gain performances. The presented antenna is comprehensively investigated, including the working principles, design consideration, and parametric studies. In addition, the research interests are extended to a 2$,times,$ 2 antenna array. Promising results from the experimental 2$,times,$2 array are achieved, including the 10-dB return loss bandwidth of 70%, the 3-dB axial ratio bandwidth of 50%, and the half-power (3-dB) gain bandwidth of 40% with a maximum gain about 11 dBi. The measured and simulated results are well complied with each other.      

Truncated spherical helical antennas

The truncated spherical helix is presented as a compact circularly polarised antenna with relatively high gain and moderate bandwidth. A numerical investigation into the radiation properties of this antenna is also presented. The antenna provides a directivity of >9 dB and an axial ratio of <3 dB over a 10% bandwidth. The radiation pattern has a broad main beam and better than 20 dB front-to-back ratio     

A microstrip array feed for land mobile satellite reflectorantennas

A circularly polarized feed array for a spacecraft reflector antenna is described that was constructed by using linearly polarized microstrip elements. The array has seven subarrays which form a single cluster as part of a large overlapping cluster reflector feed array. Each of the seven subarrays consists of four linearly polarized microstrip elements. The array achieved a better than 0.8-dB axial ratio at the array pattern peak and better then 3 dB antenna gain to 20° from the peak, across a 7.5% frequency bandwidth. A teardrop-shaped feed probe was used to achieve wideband input impedance matching for the relatively thick microstrip substrate. The low impedance and axial ratio bandwidths were achieved using a relatively thick honeycomb substrate with the impedance-matching feed probes     

Application of simulated annealing to design of serial feedsequentially rotated 2×2 antenna array

A 5.8 GHz circularly polarised 2×2 patch antenna array is presented, employing sequential rotation of dual-feed circularly polarised elements; appropriate phase-shifting and power splitting are achieved via a serial feed arrangement. The feed has been optimised using simulated annealing; the resulting structure has a voltage standing wave ratio 2:1 bandwidth of 9.8%. Results obtained by full wave simulation and practical measurement confirm the integrity of the design     

Low profile single feed monopole antenna for quad-band circularly polarised applications

ABSTRACT

A single fed monopole antenna for circularly polarised quad-band applications is presented. The antenna radiator is comprised of half ring-shaped arcs integrated with the 50Ω microstrip feed line. In the proposed design, the circular polarisation is achieved by means of integrating ring, stubs and implanting an open-ended C-shaped slot in the ground surface. The designed antenna has a ?10 dB impedance bandwidth in the range of 2.41 GHz to 4.14 GHz and 4.34 GHz to 6.33 GHz. The 3-dB axial ratio bandwidth varies from 3.01 to 3.21 GHz, 3.46 to 3.79 GHz, 4.53 to 4.68 GHz and 5.08 to 5.10 GHz, therefore, exciting four circularly polarised bands. The proposed antenna covers almost all the IEEE 802.11 and IEEE 802.16 standards and may be a suitable candidate for WLAN and WiMAX applications. The optimisation of the designed antenna is conducted using tool Ansys HFSS and found simulated results in a good match with measured results.     

一种新型布局的圆极化微带天线阵优化设计

提出了一款高增益低副瓣新型圆极化微带天线阵。单元天线采用叠层切角圆极化微带结构,通过八边形边界布局和顺序旋转交叠组阵技术,实现了天线阵方向性图的对称性和圆极化辐射性能的最优化;馈电网络采用威尔金森功分器和最大平坦式阻抗变换器实现不等功分宽带阻抗匹配,通过改进馈电方向寻求对称结构,简化了馈电网络的设计。制作了天线阵实物并进行了测量。测试结果表明:天线在3.2~4.6 GHz频段内S₁₁<-10 dB,阻抗相对带宽36%;在3.8~4.5 GHz频段内顶点轴比小于3 dB,圆极化相对带宽17%;在4~4.4 GHz频段内天线增益均在15 dB以上,最高增益达17 dB。     

Miniaturised CPW-fed circularly polarised corrugated slot antenna with meander line loaded

A novel CPW-fed circularly polarised antenna with corrugated structure and meander line loaded is presented. This antenna can achieve 44% size reduction compared to the conventional CPW-fed slot antenna. Predicted results are validated by experiment. The measured 3 dB axial ratio bandwidth and the 10 dB return loss bandwidth are 12.4 and 17.1%, respectively. The peak gain of the antenna is 4.0 dBi.     

Printed antenna and array with circular polarisation

A new type of printed antenna element, as well as an array of elements with circular polarisation, is shown. The antenna has a much wider bandwidth than known circularly polarised printed antennas, mostly microstrip patches. The method of design and realisation with experimental results is shown     

Single-feed circularly polarized microstrip ring antenna and arrays

An analysis is presented for a microstrip-feed proximity-coupled ring antenna and a four-element array. Interactions between the embedded microstrip feed and the radiating element(s) are rigorously included. Results demonstrate that circular polarization of both senses can be achieved with a ring antenna with proper design of two inner stubs located at angles of ±45° with respect to the feedline. Theory and experiment demonstrate an axial ratio 3-dB bandwidth of 1% and the voltage standing wave ratio (VSWR) <2 bandwidth of 6.1%. The axial ratio bandwidth is typical for a microstrip antenna with perturbations, while the VSWR bandwidth is larger than for the circular or rectangular patch with perturbations. A mutual coupling study between two elements shows that the axial ratio is less than 2 dB for interelement spacing greater than 0.55λ_eff, while the VSWR <2 for all spacings considered. A comparison between theory and experiment is provided for a 2×2 element array. The benefits of sequentially rotating the antenna elements in an array environment are presented. The axial ratio and VSWR bandwidths are both increased to 6.1% and 18% for a four-element array. A single-element antenna with two orthogonal feeds to provide both senses of polarization is demonstrated. The ring antenna is small (D/λ₀=0.325), the substrate thickness is thin (H/λ₀~0.035), and the microstrip feed produces a completely planar antenna system, which is compatible with microwave and millimeter integrated circuits (MICs), and monolithic microwave integrated circuits (MMICs)     

64 单元X 波段高增益圆极化微带阵列天线设计

采用双层矩形贴片加切角的结构设计圆极化单元,并将其组成应用于X 波段64 单元高增益圆极化微带阵列天线。天线基板采用Taconic-TRF,介电常数4. 5,厚度0. 81mm,损耗角正切0. 0035。利用Ansoft HF-SS 软件对单元及阵列模型进行仿真优化。通过实际测试,64 单元阵列天线轴比AR<6dB 的带宽500MHz,增益达到21. 2dB,S11 <-10dB 的相对阻抗带宽达到6. 9%,天线具有良好的圆极化和阻抗匹配特性。圆极化天线具有较强的抗干扰能力,可很好地应用于电子侦察、电子对抗等领域。设计的圆极化微带阵列天线为组成更大阵列的天线以及构建相控阵天线提供了单元基础。     

Wideband single-fed circularly polarised patch antenna

A novel circularly polarised (CP), single-fed microstrip antenna is presented. The antenna consists of a stacked structure of almost square patches. The proposed design has a reduced antenna size compared to the conventional CP microstrip antenna at a given operating frequency. The impedance and axial ratio bandwidths are large and CP radiation quality is excellent over the entire upper hemisphere. The proposed antenna is suitable for global positioning system (GPS) applications.