三轴加速度计在水下结构振动测试中的应用

采用基于MEMS技术的ADXL330三轴加速度计芯片,设计了适合水下结构振动测试的加速度传感器,并应用于某输水管线闸门振动监测系统中。分析了ADXL330结构、原理和标定方法。根据水下结构振动测试特点和要求,设计了应用电路、防水结构以及振动测试系统。现场应用表明,采用该芯片设计的三轴加速度传感器能够满足水下结构振动监测的需要,具有低成本、高精度、易安装和安全可靠等特点。     

三轴加速度计在水下结构振动测试中的应用

采用基于MEMS技术的ADXL330三轴加速度计芯片,设计了适合水下结构振动测试的加速度传感器,并应用于某输水管线闸门振动监测系统中.分析了ADXL330结构、原理和标定方法.根据水下结构振动测试特点和要求,设计了应用电路、防水结构以及振动测试系统.现场应用表明,采用该芯片设计的三轴加速度传感器能够满足水下结构振动监测的需要,具有低成本、高精度、易安装和安全可靠等特点.     

风力发电机振动采集系统的设计

针对振动分析在风力发电机状态检测及故障定位中的作用,设计了基于ADXL335三轴加速度传感器的振动采集系统,并通过STM32实现模数转换。对信号采集过程中出现的频率混叠,设计了六阶巴特沃斯低通滤波器,采用Savitzky-Golay平滑算法对信号中掺杂的噪声进行去噪。测试结果表明：所设计滤波器可有效滤除600Hz以上的信号,振动加速度的误差可控制在0.5%以内;Savitzky-Golay平滑算法可有效消除信号中的噪声。     

三轴加速度计ADXL330的特点及其应用

ADXL330是美国模拟器件公司推出的完整的三轴加速度计,可以静态或者动态测量物体的加速度,测量范围是±2g.介绍了ADXL330的主要特点及其在组合导航系统中的应用.     

士兰微电子再创MEMS传感器新品

士兰微电子早在三年前开始进行MEMS传感器技术和产品的研发,并在MEMS传感器件的设计、信号处理芯片的设计、MEMS芯片工艺制造技术、MEMS封装技术、传感器测试技术等领域投入了全方位的研发资源,并于近期取得实质性进展,推出了三轴加速度传感器SC7A30和三轴磁传感器SC7M30。     

基于SOI的集成硅微传感器芯片的制作

为满足小体积、多参数测量的要求,采用SOI硅片,设计了一种测量三轴加速度、绝对压力、温度参数的单片集成硅微传感器,其中加速度、绝对压力传感器基于掺杂硅压阻效应,温度传感器基于掺杂硅电阻温度效应.根据集成传感器的结构,制定了相应的制备工艺步骤.针对芯片上各电阻间金属引线的可靠性问题和加速度传感器质量块吸附问题提出了有效的改进方法.最后给出了集成传感器芯片的性能测试结果.     

ADXL105加速度传感器在车辆平顺性测试中的应用

介绍了加速度传感器ADXL105的特点和工作原理，结合汽车平顺性测试的要求，给出了汽车平顺性测试电路的具体设计和必要的性能测试方法。[编者按]     

基于MEMS技术的水平轴光纤加速度传感器

提出了一种基于微机电系统(MEMS)技术的水平轴光纤加速度传感器,并与Z轴光纤加速度传感器在同一MEMS芯片上制造,形成单一方向出纤的三轴光纤加速度传感器。分析了器件工作原理和器件结构参数与其性能的关系,利用MEMS技术成功制作出了加速度传感器样品。初步测试结果表明,本光纤加速度传感器灵敏度为164mV/g,3dB带宽的截止频率为1 600Hz。     

基于SOI的集成硅微传感器芯片的制作

为满足小体积、多参数测量的要求,采用SOI硅片,设计了一种测量三轴加速度、绝对压力、温度参数的单片集成硅微传感器,其中加速度、绝对压力传感器基于掺杂硅压阻效应,温度传感器基于掺杂硅电阻温度效应.根据集成传感器的结构,制定了相应的制备工艺步骤.针对芯片上各电阻间金属引线的可靠性问题和加速度传感器质量块吸附问题提出了有效的改进方法.最后给出了集成传感器芯片的性能测试结果.     

加速度传感器ADXL50在导弹行军中的应用

检测导弹在车载行军过程中受到的振动冲击。采用加速度传感器ADXL50敏感振动过程中加速度的值,然后通过ADC0809转换成数字信号,再通过信号处理的方法滤除一些随机干扰,最后进行显示与报警。提出一套完整的测量车载导弹振动冲击的方案。该方案结构简洁可靠,能够测量导弹在车载行军过程中受到的振动冲击。在此利用单片集成式加速度传感器ADXL50和单片机电路测量振动加速度。     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

INTEGRATION OF OPTICAL AND WIRELESS NETWORKS

正For a long time,optical and wireless systems/net-works are developed in separate communities witha few attempts for in-depth convergence.In fact,it prom-ises many advantages to combine the optical and wire-less technologies in the levels of systems and networks.Recently,both academia and industry have made manyefforts to enter a new phase of development to take op-tical and wireless systems as fully integrated networks.To provide high bandwidth and reliable service for bothfixed and mobile users,a well-designed network must     

社长序言（英文）

正Happy New Year!As we step into a new year,we take a look back at the key feature topics covered in China Communications over the past 12 months and set out our expecta-     

云计算专题（英文）

正Cloud computing is a novel computing paradigm that utilizes remote cloud resources to achieve a high-performance computation.Cloud provides infrastructure,platform and software as different on-demand services.China has made remarkable progress in cloudbased products and operating system technology.The government,enterprises and research institutions are all active in the development of cloud computing-related projects.Despite the progress,many important problems     

Call for Papers—Feature Topic,Vol.12,No.3,2015

正Smart Grid Communications The electric power industry is undergoing profound changes as the industry aims to capture the promise of a smart grid for a sustainable energy future.Enabled by the advanced sensing devices such as Phasor Measurement Units(PMUs),increasingly powerful