MEMSE类放大器

对采用 MEMS开关的 E类放大器进行了原型仿真 ,并且通过工艺流片制作 MEMS开关 ,搭建 E类放大器电路进行测试 .测试结果显示 ,这种机械式的放大器同样能实现有源放大器的功能 .测试得到的放大器实际效率与原型模拟结果一致 ,而放大器的功率增益高达 2 0 0 0 .     

MEMS E类放大器

对采用MEMS开关的E类放大器进行了原型仿真,并且通过工艺流片制作MEMS开关,搭建E类放大器电路进行测试.测试结果显示,这种机械式的放大器同样能实现有源放大器的功能.测试得到的放大器实际效率与原型模拟结果一致,而放大器的功率增益高达2000.     

RFID系统驱动级功率放大器的设计与实现

设计了一个工作频段902～928 MHz、输出功率19 dBm、功率增益高达27 dB应用于射频识别(RFID)系统的驱动级功率放大器.运用了仿真优化和实际测试相结合的方法快速、成功地设计了该放大器.对完成匹配后的功率放大器进行仿真优化,得到了满足设计指标要求的匹配参数,再根据这些匹配参数构建实际的功率放大器,并对放大器进行实际测试,测试结果与仿真结果高度一致.实际测试结果表明,运用这种方法设计的功率放大器完全满足设计要求,可以很好地应用在RFID系统中,从而改善系统的性能.     

短波高线性前馈放大器的设计

提出了一种采用前馈线性化技术的短波放大器设计方法,介绍了前馈线性化技术的基本原理,研究了该方法在放大器设计中的应用,探讨了在工程实现中存在的问题及解决办法,使用仿真软件ADS构建电路模型,对放大器进行了仿真及优化设计,制作了一个短波高线性前馈放大器样件,对样件进行了指标测试并与主放大器进行对比,详细分析了测试结果,验证了这种方法的可行性.     

运算放大器共模抑制比的仿真与测试

从运算放大器共模抑制比(CMRR)定义开始,对多种仿真和测试方法进行分析和比较,深入论述辅助元器件(如电阻和辅助放大器)对待测器件(DUT)仿真和测试结果的影响,分别总结出适合于仿真和测试的方法,为运算放大器设计过程中的仿真验证和封装后的测试提供参考。     

一种GaAs HBT微波功率放大器的设计

介绍了C波段宽带固态功率放大器的设计方法和实际测试结果。该放大器用于某雷达发射组件推动级,采用GaAs HBT器件,宽带匹配电路、直流偏置、负反馈设计。根据负载牵引分析,运用微波仿真软件对功率管的输入、输出阻抗匹配电路及其偏置电路进行优化仿真设计,增加电源控制电路保证可靠性,研制出了符合整机指标要求的放大器。     

S波段低噪声放大器设计

首先分析了低噪声放大电路的稳定性,功率增益及噪声系数的影响因素及改进方法;然后设计了一个中心频率为2.45 GHz,工作带宽为100MHz的S波段低噪声放大器.仿真结果表明,该放大器的噪声系数小于1 dB,功率增益大于28 dB,增益平坦度小于1 dB,输入/输出驻波比小于2:1.通过传统的电路板制作工艺实际制作了放大器电路,测试结果和仿真结果较一致.     

VHF/UHF宽带低噪声放大器设计

介绍了VHF/UHF宽带低噪声放大器的设计与实现。利用软件对放大器的电性能及有源芯片的沟道温度进行了仿真、优化。电路制作完成后,与实际测试结果进行了对比分析,并且结合不同电路形式,开发了系列化放大器。该系列放大器采用GaAs PHEMT管芯,微波薄膜工艺,封装在密封的金属或陶瓷管壳中,性能优异,体积小、噪声低、动态范围大,可适应目前微波整机向小型化、高可靠方向发展的需求,有着广泛的应用前景。     

单极阻容耦合放大器的Multisim仿真辅助实验新方法

单极阻容耦合放大器是电子技术课程必做的基础实验.本文首先针对验证型实验,采用Multisim10.0电路仿真软件测试和分析电路的各项指标,仿真结果与实际电路测试结果基本一致.同时,针对设计型实验,根据设计指标要求,结合传统的理论推导和Multisim,系统地设计了单极阻容耦合放大器电路,经过仿真修正和实际电路测试,完全达到设计要求.     

C波段高增益放大器的设计

为了使放大器在C波段得到足够大的放大效果,提出了二级放大电路的设计方案,采用两个放大器串联的方式,并完成相关的设计。相关设计主要包括偏置电路、匹配电路等,在ADS环境下计算微带线的尺寸并对放大电路进行仿真。通过实际测试,达到了预期的效果。     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Call for Papers

正Communications—VLSI Researches and industries of telecommunications have been growing rapidly in the last 20 years and will keep their high growing pace in the next decade.The involved researches and developments cover mobile communications,highway and last-mile broadband communication,domain specific communications,and emerging D2D M2M communications.Radio communication steps into its