首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
高压辊磨机在国内外矿山得到越来越广泛的应用.在简要阐述高压辊磨机粉碎原理和结构的基础上,综述了高压辊磨机在金刚石矿、金矿、铁矿、铜矿、钼矿等矿物加工工程中的应用进展情况.  相似文献   

2.
高压辊磨机粉碎原理为层压粉碎,具有处理量大、节能高效等特点。与传统破碎方式相比,高压辊磨机粉碎产品细粒级含量高、微裂纹发育、矿物解离度高、邦德球磨功指数低,还有助于下游选别或浸出作业。随着辊面抗压强度和抗磨蚀性能不断增强,高压辊磨机已经广泛应用于冶金矿山领域,如金刚石与围岩解离、球团原料铁精矿预处理、金属矿磨前(超)细碎,(半)自磨工艺顽石破碎等。高压辊磨机的成功应用与其粉碎行为密切相关。文章依次从高压辊磨机的研发背景、工作原理、辊面压力分布、宏观粉碎过程、料床应力响应、粉碎产品特性等方面系统评述了高压辊磨机的粉碎行为,并分析了边缘效应和辊面磨损的产生机理、负面影响及其应对措施,旨在全面地阐述高压辊磨机粉碎行为。  相似文献   

3.
基于层压粉碎原理,高压辊磨机具有处理量大、能量利用率高、粉碎产品粒度细等特性,已经广泛应用 于冶金矿山领域,且节能降耗效果显著。 文章总结了开路粉碎、边料返回半闭路粉碎和筛分(包括干法筛分和湿法筛 分)全闭路粉碎三种粉碎工艺的选择依据。 结合高压辊磨机在金刚石解离、铁矿球团原料预处理、(半)自磨顽石破碎 和金属矿磨前粉碎领域的典型应用案例,重点阐述了高压辊磨机的粉碎工艺流程、设备型号、操作参数及应用效果。 不断提高粉碎效率、降低粉碎成本仍是高压辊磨机粉碎工艺的发展方向。 虽然多台高压辊磨机串联配置、高压辊磨 机与风力分级设备配置、高压辊磨机与搅拌磨机直接配置等新工艺发展不够成熟,但节能降耗优势明显,有望为冶金 矿山物料高效粉碎提供新的解决方案。  相似文献   

4.
郭小飞 《金属矿山》2017,46(6):70-74
结合高压辊磨机中物料粉碎机理,介绍了影响高压辊磨机粉碎效果的关键因素,评述了高压辊磨机设备选型试验的研究现状。高压辊磨机粉碎物料的效果主要受物料性质、辊压机工作参数及粉碎工艺等的影响。通过小型及半工业型高压辊磨机粉碎试验能够为高压辊磨机的设备选型和流程设计提供依据,但试验过程相对复杂。颗粒床活塞压载试验和数学建模尽管能够对矿石料层粉碎的工作压力、比能耗、产品粒度分布等进行有效预测,但和高压辊磨机设备选型的经验公式一样均需要对其适用性进行验证。指出高压辊磨机未来的研究方向为粉碎过程中能量传递模型、矿石碎磨特性及对分选工艺影响等的理论基础研究,以及高压辊磨机在选矿流程中的数值模拟研究。  相似文献   

5.
高压辊磨机自问世以来,引起粉碎界的高度关注,它不仅有助于实现多碎少磨,而且随着产品细度的降低,很可能成为以碎代磨的新型粉碎设备。笔者利用φ200mm×50mm实验室型高压辊磨机,对其工艺因素进行了较系统的研究,分析了高压辊磨机的压力、转速、给料粒度和组成、含水率等工艺因素与粉碎能耗、粉碎概率等粉碎指标的关系,对于研制和设计高压辊磨机,生产运用高压辊磨机有着理论的和实践的意义。  相似文献   

6.
陆颖  高航 《矿山机械》2000,(10):13-14
高压辊磨机是一种高效、节能粉碎设备,但在金属矿山领域未能得到较好应用,其原因是辊面磨损严重,该文对高压辊磨机辊面磨损机理进行初步探讨和实验分析。  相似文献   

7.
高压辊磨机的经济的细磨方法   总被引:1,自引:0,他引:1  
所谓的颗粒层(Particle-bed)高压粉碎法,是系统研究高压作用于物料群(所谓颗粒层)的影响结果。同时,该方法作为一种经济的细粒粉碎法获得普遍承认。在详细描述了本方法和 Alpine高压辊磨机后,将它与球磨机、双辊磨矿机和辊式破碎机作了技术和经济上的比较,证明这种新的粉碎方法指标好和效率高。本方法最重要的应用领域是:矿物填料、陶瓷原料、磨蚀剂和其他物料,例如化学药剂、矿渣、耐火材料及金属氧化物。  相似文献   

8.
高压辊磨机粉碎数学建模和计算机模拟研究进展   总被引:1,自引:0,他引:1  
介绍高压辊磨机粉碎数学模型的研究进展,以及应用粉碎数学模型通过计算机模拟计算进行工业型高压辊磨机粉碎效果预测、粉碎回路流程设计和工艺条件优化的研究进展。  相似文献   

9.
从高压辊磨机在矿石碎磨工艺流程中的地位及所起的作用角度综述此设备在矿物加工领域的应用现状和潜力,展望未来的发展前景及面临的挑战。  相似文献   

10.
介绍了HFKG高压辊磨机的粉碎原理以及粉碎物料的优势。列举了HFKG高压辊磨机在原平白石联营铁矿和安徽大昌矿业公司的应用情况。  相似文献   

11.
The effect of particle-bed breakage mechanisms on the liberation properties of ores remains unclear. Surprisingly few studies have been published in this area and limitations in liberation measurement techniques previously used have prevented definitive conclusions from being reached regarding whether particle-bed breakage enhances the liberation properties of mineral ores relative to conventional grinding mechanisms. In this study, two sulphide ores of differing textures were comminuted to various size distributions using impact and particle-bed breakage mechanisms in a hammer mill and a piston–die compression unit respectively. The liberation properties of the various discharge samples were then characterised using a mineral liberation analyser – a mineralogical characterisation system based on automated scanning electron microscopy. It was found that the size-by-size liberation properties of both valuable and gangue mineral phases were independent of both the method used to comminute the samples, as well as the particle size distribution of the final products. These effects are discussed in terms of how they may be exploited in liberation modelling and characterising comminution circuit performance.  相似文献   

12.
Due to the very fine grained nature and complexity of the platinum bearing ores from the Bushveld Complex in South Africa, numerous processing operations have investigated alternate comminution devices that can be used to liberate the platinum group minerals of the Merensky and UG2 ores at a coarser grind, at reduced energy consumption and increased throughput. In this study, the mineralogy and flotation performance of product from the high pressure grinding rolls (HPGR) was evaluated and compared to a conventional ball mill product with the aim of determining whether the HPGR product could be used for flotation without any further grinding. Results show that for both the Merensky and UG2 platinum ores, the HPGR product showed more fines and less coarse content compared to the ball mill product. No conclusive evidence of preferential liberation was observed for samples prepared by particle bed breakage. The best flotation results were obtained from the ball mill product. The results from this study have shown the definite need for an integrated approach for the interpretation of the results that extends beyond just measurements of valuable mineral liberation.  相似文献   

13.
王明燕 《矿冶》2011,20(3):102-106
通过对河南某钼矿进行工艺矿物学研究,查明了该矿石的化学组成、矿物组成、嵌布特征、粒度组成和不同磨矿细度下重要矿物的单体解离度等工艺性质,并阐明了影响选矿工艺的矿物学因素,指出提高选别指标的途径,为选矿工艺提供合理的理论依据。  相似文献   

14.
本钢歪头山矿石碎磨特性参数研究   总被引:1,自引:0,他引:1  
以本钢歪头山铁矿石为试验物料,采用JK落重试验和Bond球磨功指数试验研究了矿石的碎磨特性参数。结果表明:冲击粉碎参数A为65.53,b为1.06,A×b为69.46;磨蚀粉碎试验获得的矿石磨蚀系数ta为0.72;相对密度测定试验获得的矿石相对密度为3.31。Bond球磨功指数试验获得的球磨功指数Wib为7.64 kWh/t,碎磨特性参数和Bond球磨功指数表明,歪头山矿石属于软矿石范畴,其抗冲击破碎能力和抗磨蚀能力都比较弱,矿石中没有难磨粒子。  相似文献   

15.
Application of process mineralogy as a tool in sustainable processing   总被引:2,自引:0,他引:2  
The observed behaviours of mineral particles in mineral processing operations have been exploited in the past to model comminution and concentration processes. In this work this concept has been taken a step further, exploiting the mineralogical characteristics of particles to link comminution, concentration and smelting. This approach is demonstrated using a laboratory-based case study of a Ni-Cu sulphide ore. The case study focused on the effect of shifting energy between the comminution and smelting stages on the overall energy consumption for the metal production process. To model this effect the mineral composition of the particles was linked to the behaviour of the ore particles in the primary grinding, regrinding and flotation stages. This application of process mineralogy provides a methodology to minimise energy use across mineral concentration and smelting processes, an important aspect of sustainable processing.  相似文献   

16.
姜文杰  童雄  谢贤  康博文  赵瑜 《金属矿山》2019,48(11):120-124
钽、铌是工业上不可替代的金属,钽铌矿普遍具有品位较低、嵌布粒度细、性脆易碎、矿物组分复杂等特点,选矿工艺往往较复杂。为促进钽铌矿选矿技术的进步,对钽铌矿选矿技术进行了综述,指出钽铌矿的粗选宜以重选工艺为主,精选多采用磁选、浮选、电选工艺;电选工艺主要用于精矿的除杂和综合回收;浮选工艺可以有效地回收钽铌细泥;化学选矿是处理低品位复杂钽铌矿的有效工艺。因此,钽铌矿的选别常采用联合工艺流程。  相似文献   

17.
姜文杰  童雄  谢贤  康博文  赵瑜 《金属矿山》2020,48(11):120-124
钽、铌是工业上不可替代的金属,钽铌矿普遍具有品位较低、嵌布粒度细、性脆易碎、矿物组分复杂等特点,选矿工艺往往较复杂。为促进钽铌矿选矿技术的进步,对钽铌矿选矿技术进行了综述,指出钽铌矿的粗选宜以重选工艺为主,精选多采用磁选、浮选、电选工艺;电选工艺主要用于精矿的除杂和综合回收;浮选工艺可以有效地回收钽铌细泥;化学选矿是处理低品位复杂钽铌矿的有效工艺。因此,钽铌矿的选别常采用联合工艺流程。  相似文献   

18.
The total energy consumption for ore comminution will further increase within the next decades. One contribution to minimise the increase is to use more efficient comminution equipment. Vertical-roller-mills (VRM) are an energy-efficient alternative to conventional grinding technology. One reason is the dry in-bed grinding principle. Results of extensive test works with two types of magnetite iron ores in a Loesche VRM are presented here. Within these test works, mill parameters like grinding pressure, separator speed and dam ring height were varied, following a factorial design of the experiments. The effects of the grinding parameters on the liberation of valuable minerals are characterised using mineral liberation analysis (MLA). It is shown how the different mill parameters influence important performance values like energy consumption, production rate and mineral liberation. Via multiple regression analysis, an optimal parameter range can be modelled for both ore types. The parameter predictions have been successfully verified in practical test works.  相似文献   

19.
碎磨工艺是后续选冶工艺的准备过程或准备作业,必须满足选冶工艺对矿石处理的粒度要求,使矿物充分地单体解离才能获得高质量的选冶产品和高指标。碎磨产品质量直接影响到选矿指标和生产成本,是选矿厂的重要组成部分。本文通过分析选矿厂碎磨工艺流程现状,指出了存在的主要问题:碎磨流程试验研究重视程度不足、建设投资和生产能耗高;噪音和粉尘大污染环境等。针对这些问题,探讨了碎磨工艺有效的应对措施,以满足选别对产品粒度更严格的要求,适应节能、环境、操作更苛刻的条件,并对未来碎磨工艺发展趋势进行了展望。  相似文献   

20.
何书明  谢海云  姜亚雄  陈军  谭伟 《矿冶》2013,22(4):9-13
由于氧化矿的浮选较为困难,浮选指标较差,因此研究氧化矿捕收剂在矿物表明的作用机理非常有意义。本文对氧化矿捕收剂在矿物表面吸附机理的研究进展进行了归纳总结,对常见的几种氧化矿(如氧化铅锌矿、氧化铁矿、氧化铜矿)浮选捕收剂及作用机理的研究现状进行了概述,指出了存在的一些问题及今后的研究方向。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号