共查询到20条相似文献,搜索用时 31 毫秒
1.
低成本等离子体球化技术制备热喷涂用球形钨粉的工艺研究 总被引:2,自引:0,他引:2
球形钨粉因其流动性好,得到的涂层更均匀、致密等特点在热喷涂领域受到重视。但是,粉末球化的主要手段,如等离子体球化技术成本太高未能得到普遍推广。本文采用大气等离子体喷涂设备,以费氏粒度为20μm的普通钨粉为原料,氮气送粉和自制水冷系统来研究低成本的等离子体球化技术制备热喷涂用球形钨粉的工艺。研究表明,大气等离子体喷涂球化过程中钨粉的氧化程度与等离子体功率密切相关,球化功率为30kW时,经该工艺处理所得的钨粉具有非常好的球形度,且在球化过程中氧化程度低。 相似文献
2.
3.
4.
5.
6.
利用氩气射频等离子体球化处理形状不规则的氢化钕铁硼粉末。采用扫描电子显微镜、能谱仪、X线衍射仪、激光粒度分析仪对射频等离子体处理前后粉末颗粒的形貌、元素分布、物相、粒度分布进行测试和分析。结果表明:不规则形状的氢化钕铁硼粉末的脱氢分解和球化过程可在等离子体中一步完成,得到球形度高、分散性好、球化率接近100%的球形粉末。球形粉末较氢化钕铁硼原料粉末,粒度分布明显变窄,平均粒度稍有减小。球形粉末的相组成主要为Nd_2Fe_(17)(B)和α-Fe。元素分布测试表明,经射频等离子体处理获得的球形粉末有轻微的元素偏析。随载气流量增加,粉末的球化率降低。结合FLUENT数值模拟分析得出载气流量的变化对等离子体炬的温度场有很大影响。 相似文献
7.
《稀有金属与硬质合金》2017,(4)
采用感应等离子体球化技术对形状不规则的W粉、Cr粉进行球化处理,研究了喂粉速率对粉末球化效果的影响。采用SEM、XRD、激光粒度仪和霍尔流速计测试了等离子体球化处理前后粉末的形貌、物相、粒径分布和松装密度。研究结果表明,感应等离子体球化技术可制备出单相的球形W粉和Cr粉,粉末的松装密度和流动性显著提高;降低喂粉速率,W粉和Cr粉球化率均提高,最高球化率大于98%;原料粉末的分散度影响球化处理后球形粉末的粒径和粒度分布。 相似文献
8.
9.
以喷雾造粒WC–30Co粉末为原料,采用射频等离子体和后续热处理制备3D打印用球形WC–Co粉末,研究射频等离子体球化和热处理对粉末特性的影响。结果表明,射频等离子体球化效果显著,喷雾造粒粉末的球化率可达100%。球化后的粉末表面光滑、结构致密,存在一定数量表面粗糙的“费列罗”颗粒。射频等离子体处理使粉末的松装密度和流动性显著提高,同时导致WC严重分解和Co蒸发损失,球化粉末中含有大量C、W2C和Co3W3C等有害相,Co质量分数降低至25.80%。后续热处理可很好地对球化粉末进行物相和成分调控。经900 ℃热处理后,粉末的物相组成重新转变为WC和Co,游离碳含量控制在合理的水平,并且粉末依然保持良好的球形度,具有较好的松装密度和流动性,可以满足3D打印对原材料的要求。 相似文献
10.
11.
《China Nonferrous Metals Monthly》2014,(12)
正From August to September,the Chinese Entrepreneur Survey System organized and implemented"Chinese Entrepreneur Questionnaire Follow-up Survey 2014".This marked the 22nd time of national entrepreneur annual follow-up survey organized by this 相似文献
12.
《China Nonferrous Metals Monthly》2014,(11)
正According to news from Beijing on October 10,the Recycling Metal Branch of China Nonferrous Metals Industry Association said that in the first three quarters of 2014,China’s total output of secondary nonferrous metals(copper,aluminum,lead,zinc)was 7.37million tonnes,recording a slight increase of 相似文献
13.
正In early May,the 300,000 t/a Low Oxidizing Copper Rod Project of Hubei Daye Nonferrous Metals Co.,Ltd("Daye Nonferrous Metals")started production.As the first copper deep processing project independently invested and constructed by Daye Nonferrous Metals,this project can fully utilize its cathode copper raw material advantage to manufacture low oxidizing copper 相似文献
14.
《China Nonferrous Metals Monthly》2014,(11)
正On October 19,the Shanxi Province Pinglu County Phase I 800,000t/a Aluminum Oxide Project of Shanxi Fusheng Aluminum Co.,Ltd,a subordinate of Hangzhou Jinjiang Group,started operation.This is the fourth Aluminum oxide project constructed and operated by Jinjiang Group. 相似文献
15.
《China Nonferrous Metals Monthly》2014,(11):2-5
正When eight ministries and commissions jointly issued decrees to rectify rectification the rare earth industry,and cracked down on"illegal rare earth",enterprises inside the industry are also developing joint union and coalition to usurp resources.In the evening of October 13,Hongda Xingye published public notice,saying that it planned 相似文献
16.
《China Nonferrous Metals Monthly》2014,(10)
正On September 14,the reporter learnt from the Seminar on Application of New Rare Earth High-iron Aluminum Alloy Cable Technologies for Energy Conservation and Environmental Protection held by Chongqing Electric Industry Association that a rare earth high-iron aluminum alloy cable company with 相似文献
17.
18.
《China Nonferrous Metals Monthly》2014,(10)
正The recent period has witnessed heated discussion on resource tax reform as a hot spot topic in the industry.Some information sources disclosed that the resource tax reform of the nonferrous metal industry would be enforced next year in the latest,the levy method will be changed from quantity-based levy to pricebased levy. 相似文献
19.
20.
正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field, 相似文献