首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
建立了准确测定高钍体系中微量铀的方法。用CL-TBP萃淋树脂分离铀、钍,用5 moL/L盐酸溶液淋洗钍,12 mL水(相对1 g树脂)淋洗铀,淋洗剂流速1.0 mL/min,淋洗液定容至25 mL;用~(187)Re作内标元素,以ICP-MS法测定铀。结果表明:方法加标回收率在96.4%~108%之间,相对标准偏差为2.73%(n=6),测定铀的检出限为6.0 ng/L;方法准确可靠,满足工艺要求。  相似文献   

2.
铀钼共存体系中低浓度铀和钼的测定   总被引:3,自引:0,他引:3  
周丽彬  孙立梅  郑蓉 《湿法冶金》2003,22(2):106-111
研究了铀钼共存体系中低含量铀和钼的测定方法。体系中铀含量高而钼含量低时,可采用CL-TBP萃淋树脂先分离铀。然后以硫氰酸盐光度法测定钼;体系中钼含量高而铀含量低时,可在1mol/L HNO3介质中沉淀分离铀,再用萃淋树脂富集铀,用水淋洗后,再以溴代光度法测定铀。结果表明,铀、钼回收率均在95%~105%之间,方法的相对标准偏差小于5%。  相似文献   

3.
本文介绍了用新显色剂二溴羧基偶氮胂分光光度法测定钨合金中的钍.在0.5mol/L硫酸介质中,钍与新试剂形成蓝紫色配合物,在630nm处具有最大吸收,摩尔吸光系数为1.15×10~5L·mol~(-1)·cm~(-1),配合物的组成为Th:R=1:2.钍量在0~50μg/25ml范围内符合比尔定律.许多常见离子在xmg乃至xxmg时不干扰测定.对钨合金中钍的测定获得了满意结果.  相似文献   

4.
白乌云  赛音  李胜 《稀土》2003,24(3):56-58
在表面活性剂CTMAB存在下,在pH9.8~10.2NH4Cl-NH3·H2O缓冲体系中,钍( )与5′-硝基水杨基荧光酮(5′-NSF)形成紫红色多元配合物,其最大吸收波长在570nm,表观摩尔吸光系数ε为1.89×105L·mol-1·cm-1,钍含量在0~40μg·(25mL)-1范围内符合比耳定律。经离子交换分离除去干扰离子,用本法测定了稀土精矿和寻乌矿中的微量钍,结果满意。  相似文献   

5.
钍(Ⅳ)与DBS-偶氮胂在硫酸介质中反应生成组成比为1∶2络合物,由此建立了一个测定钍的新体系.本方法测定钍(Ⅳ)的线性范围为0~2μg·mL-1,在628nm处方法表观摩尔吸光系数为ε=1.02×105L·mol-1·cm-1,检出限为7.6ng·mL-1.本法用于海带和紫菜样品中钍含量的测定,相对标准偏差分别为4.07%、4.74%,回收率分别为101.3%、101.0%.  相似文献   

6.
研究了偶氮氯膦-Ⅲ(CPA-Ⅲ)分光光度法测定铋(Ⅲ)。在2.6mol/L高氯酸介质中及有表面活性剂聚乙烯醇存在条件下,铋(Ⅲ)与CPA-Ⅲ形成1∶2的紫红色配合物,该配合物的最大吸收波长为516nm,表观摩尔吸光系数ε_(516nm)=1.12×10~5 L·mol-1·cm-1,铋(Ⅲ)质量浓度在0~0.7μg/mL范围内符合比尔定律,方法检出限为0.27μg/mL。该方法已成功用于测定胃药中的铋。  相似文献   

7.
郑蓉 《湿法冶金》2002,21(2):105-112
研究了在硝酸介质中 ,用 CL-TBP萃淋树脂分离铀 -原子吸收分光光度法测定 Fe、Mg、Ca、Na和 K。铀矿石用氢氟酸、硝酸和盐酸等溶解 ,铀产品 (化学浓缩物 )用少量硝酸溶解后 ,在 5 mol/L硝酸体系中 ,用 CL-TBP萃淋树脂选择性吸附铀 ,使其与金属元素 Fe、Mg、Ca、Na、K分离 ,从而消除主体元素铀的干扰。流出液中的金属元素用空气 -乙炔火焰原子吸收法测定。分析结果表明 ,本法的相对标准偏差优于± 1 0 % ,Fe、Mg、Ca、Na、K标准加入回收率分别为 94.8%~ 1 0 1 .0 % ,96.0 %~ 1 0 0 .0 % ,95 .7%~ 1 0 3 .0 % ,95 .7%~ 1 0 3 .0 % ,98.1 %~1 0 0 .0 % ,令人满意。该方法的建立 ,为铀水冶工艺中常规元素的测定提供了简单、快速、灵敏度高的分析方法  相似文献   

8.
研究了新显色剂羧基三氮唑偶氮氯膦(简称CTACPA)的合成及其与镧(Ⅲ)的显色反应。在pH 4.0的HAc-NaAc缓冲介质中,CTACPA与镧(Ⅲ)形成稳定的紫红色配合物,其最大吸收波长为645nm,表观摩尔吸光系数为3.79×104 L·mol-1·cm-1,镧(Ⅲ)质量浓度在0.08~0.8μg/mL范围内符合比尔定律,一些镧系稀土离子对测定结果没有干扰。方法可不经分离直接测定Pt-La/CNTs和Pt-La/ZrO2催化剂样品中微量镧,测定值与原子吸收光谱法(AAS)测定值相符。  相似文献   

9.
对甲基二溴偶氮胂分光光度法测定铬(Ⅲ)   总被引:2,自引:1,他引:1       下载免费PDF全文
在pH 2.2的HCl-KCl缓冲介质中,Cr(Ⅲ)与对甲基二溴偶氮胂显色反应,形成一种稳定的紫红色络合物,络合物组成比为1∶1,其最大吸收波长为612 nm,表观摩尔吸光系数ε612 nm=2.33×104L.mol-1.cm-1,Cr(Ⅲ)的质量浓度在0.10~1.80 mg/L范围内符合比尔定律。本法应用于测定2个雨水样品中铬,测定结果与原子吸收光谱法结果相一致,相对标准偏差分别为0.79%和2.60%(n=13)。  相似文献   

10.
铀锆合金燃料中的杂质元素会影响其运行的安全性,准确测定Ca、Li、Mg、Na元素的含量具有重要意义。先使用硝酸-氢氟酸溶解样品,再采用UTEVA萃淋树脂,在酸性介质中使铀基体与待测元素定量分离,选择Ca 422.673nm、Li 670.784nm、Mg 279.553nm、Na 589.592nm作为分析谱线,建立了电感耦合等离子体原子发射光谱法(ICP-AES)测定铀锆合金中Ca、Li、Mg、Na的分析方法。使用1mol/L硝酸淋洗UTEVA萃淋色谱柱,这一分离流程对铀的去污因子约为4.0×104。Ca、Li、Mg、Na的出峰体积在6~10mL,因此保留10mL淋洗液可以满足Ca、Li、Mg、Na的测定要求。Ca、Li、Mg、Na的质量浓度为0.025~0.50mg/L时与其发射强度呈线性关系,线性相关系数均不小于0.9990;方法检出限为0.1~1.0mg/kg。按照实验方法测定铀锆合金中Ca、Li、Mg、Na,测定结果的相对标准偏差(RSD,n=6)小于3%;回收率为90%~105%。  相似文献   

11.
实验结果表明,M17铸造高温合金(%:0.16C、8.79Cr、5.79A1、4.93Ti、3.29Mo、15.20Co、0.78V、0.015B、0.073Zr、0.002S、0.001P、0.001 1O、0.001 0N)经25 kg真空感应炉返回重熔后,Si含量随重熔次数的增加而略有增加,合金中主要元素和其它杂质元素S、P、H的含量变化不大,而氧、氮略有增加;合金中初生碳化物由新合金中的草书体逐渐向返回合金块状转变,初生碳化物的遗传性堵塞合金凝固时的补缩通道,使返回料合金的疏松倾向增大,高温塑性下降较大。  相似文献   

12.
正Shijiazhuang City will build the world’s biggest replacing-copper-with-aluminum cable production base,the annual output value can reach 100 billion yuan,in the future it will develop replacing-copper-with-aluminum highend industry cluster.This piece of news was learned by the reporter at the Rare Earth highiron Aluminum Alloy[Nonferrous Business Opportunity:Aluminum alloy door]Cable Conductor New Technology Application Seminar held at the provincial capital.  相似文献   

13.
正Since the beginning of Chongqing’s upgrading to a municipality directly under the Central Government,Chongqing City has established direct friendly relationship with Almaty,Kazakhstan,and carried out a series of cooperation in commerce and trade,and culture  相似文献   

14.
正"For each tonne of aluminum being produced,the upstream enterprise on the aluminum industrial chain will suffer loss about 2000yuan."Said Liang Xiao,Deputy Director of Pingguo Industrial Park Management Committee under the Guangxi Baise City,one of the four major aluminum industry bases in China,on August 11.Extending aluminum  相似文献   

15.
16.
正Immediately after the news that Chinalco transferred 58%stock equity of Yunnan Copper Group to its wholly-owned subsidiary China Copper Corporation Limited free of charge was disclosed on July 9,many individual investors couldn’t help but to think:Does it mean China Copper Corporation Limited will assemble assets for overall listing?At present,among main copper business companies under China Copper Corporation  相似文献   

17.
正At the press conference recently held by the National Development and Reform Commission under the theme"Deepen Reform in Investment AuditApproval System",when answering questions from reporters,Huang Min,Director of the Department of Fixed Assets Investment of the National Development and Reform Commission,said that in the future it would continue to intensify efforts in geological prospecting,and actively guide social capital to enter this field.  相似文献   

18.
正Recently,Guangxi Metallurgical Research Institute,a subsidiary of Guangxi Nonferrous Metals Group,completed survey on laterite and related manufacturers in the region,by combining the current development status of laterite both at home and abroad,it compiled Guangxi’s first"Research Report on the Development of Guangxi Nickel Industrial Chain"which adopted laterite as the study subject.This report expounded on the current  相似文献   

19.
20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号