共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
苏华 《有色金属材料与工程》1988,(5)
在400—580℃温度范围内用氢气将草酸钴和氧化钴还原为金属钴粉,研究了原料粒度和还原温度对钴粉粒度、比表面、松装密度和摇实密度的影响,讨论了还原期间在不同原料表面上发生的局部化学反应机理。结果表明,用草酸钴可制得具有费氏粒度0.5μm、BET 比表面400000cm~2/cm~3的极细钴粉,得自草酸钴的钴粉还具有易于研磨的脆性多孔结构。对于形成多孔产物相的固体物质的分解和还原反应,作者推出了产物核心粒度的计算式。D=1.96(V′/V~p)~(1/2)(G/N)~(1/3)=1.96(V′/V~p)~(1/2)·A·e~(-(E_g-E_(?))/(3RT)) 相似文献
3.
本文以氯化钴溶液为原料,以碳酸氢铵为沉淀剂,用液相法制备前驱体碳酸钴,着重考查了碳酸钴合成过程中氯化钴溶液浓度、反应温度、加料速度、络合剂加入量及酸碱度等因素对碳酸钴的成核、生长的影响,煅烧温度、氢还原温度、还原时间对钴粉松比、粒度、氧含量等性能的影响,通过以上条件的优化选择,当反应终点p H值为6.8~7.0,NH3:Co(摩尔比)为(1.4~1.5):1,反应时间为120~150 min时合成理想的碳酸钴晶体,碳酸钴微观形貌为球形或类球形,粒度(D50)≤5.0μm,前驱体经洗涤、过滤、烘干,在600~700℃煅烧成氧化钴,用氢气在470~500℃将氧化钴还原4~6 h后制备成钴粉,钴粉Fsss粒度小于1.0μm,松装比重大于0.8 g/cm3,氧含量小于0.5%,微观形貌为球形或类球形,通过控制前驱体的合成以及氢还原过程,可以控制钴粉的粒度及松装比重。 相似文献
4.
溶胶凝胶纳米WO3的还原特征 总被引:2,自引:0,他引:2
利用溶胶凝胶法制备的纳米WO3粉,研究了一段还原工艺和两段还原工艺下,制备纳米W粉的基本特征;分别用XRD、TEM、FESEM、BET和SAXS(X射线小角度散射法)等手段研究了制备过程中各步骤的产物及最终产物物相组成、颗粒形貌和粒度组成。试验结果表明:一段还原工艺中,可以在700℃、90min的条件下将纳米WO3粉还原为纳米W粉,W粉平均粒度〈50nm;两段还原工艺中,在600℃、40min可将纳米WO3粉还原为纳米WO2粉,WO2粉在700℃、90min还原为W粉,W粉平均粒度〈38nm;两阶段还原工艺优于一阶段还原工艺,可获得稳定且粒径更小的纳米W粉。 相似文献
5.
6.
以通常的钴盐溶液和草酸铵为原料,通过仔细控制工艺条件、使用表面活性剂和其它添加剂,制出符合特定要求的草酸钴,进而制得纳米钴粉。用透射电镜(TEM)、BET氨吸附、X-射线衍射和还原-吸附法测可还原氧含量等手段对纳米钴粉进行表征,并进一步考察它与WC湿磨后的形貌变化和分布特征。结果表明,制出的纳米钴粉具有如下特性:分散性良好;基本呈球形;平均粒径≤40nm;氧含量≤1.92%。与WC湿磨过程中,这种纳米钴粉倾向于粘附在WC颗粒的外表。 相似文献
7.
8.
研究了低温还原微纳米氧化铁粉的还原特性与机理。用高能球磨法获得的微纳米氧化铁粉在280~400 ℃内用氢气还原,并测定还原后粉末中氧、计算氧化铁粉末的还原率,通过扫描电子显微镜来观察还原铁粉的形貌;找出了氧化铁粒度、还原温度和还原时间等参数对氧化铁还原率、铁粉粒度和粒度分布、铁粉形貌等的影响。从动力学的角度,探讨了粉末细化对低温氢气还原氧化铁活化能的影响。研究结果指出,微纳米氧化铁粉的还原反应遵循吸附自动催化理论,反应动力学遵循界面化学反应理论,研究获得了反应所对应的反应机制函数和相应的动力学方程。 相似文献
9.
研究了低温还原微纳米氧化铁粉的还原特性与机理。用高能球磨法获得的微纳米氧化铁粉在280~400 ℃内用氢气还原,并测定还原后粉末中氧、计算氧化铁粉末的还原率,通过扫描电子显微镜来观察还原铁粉的形貌;找出了氧化铁粒度、还原温度和还原时间等参数对氧化铁还原率、铁粉粒度和粒度分布、铁粉形貌等的影响。从动力学的角度,探讨了粉末细化对低温氢气还原氧化铁活化能的影响。研究结果指出,微纳米氧化铁粉的还原反应遵循吸附自动催化理论,反应动力学遵循界面化学反应理论,研究获得了反应所对应的反应机制函数和相应的动力学方程。 相似文献
10.
11.
12.
《China Nonferrous Metals Monthly》2014,(10)
正On September 14,the reporter learnt from the Seminar on Application of New Rare Earth High-iron Aluminum Alloy Cable Technologies for Energy Conservation and Environmental Protection held by Chongqing Electric Industry Association that a rare earth high-iron aluminum alloy cable company with 相似文献
13.
《China Nonferrous Metals Monthly》2014,(11)
正According to news from Beijing on October 10,the Recycling Metal Branch of China Nonferrous Metals Industry Association said that in the first three quarters of 2014,China’s total output of secondary nonferrous metals(copper,aluminum,lead,zinc)was 7.37million tonnes,recording a slight increase of 相似文献
14.
《China Nonferrous Metals Monthly》2014,(10)
正The recent period has witnessed heated discussion on resource tax reform as a hot spot topic in the industry.Some information sources disclosed that the resource tax reform of the nonferrous metal industry would be enforced next year in the latest,the levy method will be changed from quantity-based levy to pricebased levy. 相似文献
15.
16.
《China Nonferrous Metals Monthly》2014,(11)
正On October 19,the Shanxi Province Pinglu County Phase I 800,000t/a Aluminum Oxide Project of Shanxi Fusheng Aluminum Co.,Ltd,a subordinate of Hangzhou Jinjiang Group,started operation.This is the fourth Aluminum oxide project constructed and operated by Jinjiang Group. 相似文献
17.
《China Nonferrous Metals Monthly》2014,(11):2-5
正When eight ministries and commissions jointly issued decrees to rectify rectification the rare earth industry,and cracked down on"illegal rare earth",enterprises inside the industry are also developing joint union and coalition to usurp resources.In the evening of October 13,Hongda Xingye published public notice,saying that it planned 相似文献
18.
正In early May,the 300,000 t/a Low Oxidizing Copper Rod Project of Hubei Daye Nonferrous Metals Co.,Ltd("Daye Nonferrous Metals")started production.As the first copper deep processing project independently invested and constructed by Daye Nonferrous Metals,this project can fully utilize its cathode copper raw material advantage to manufacture low oxidizing copper 相似文献
19.
《China Nonferrous Metals Monthly》2014,(12)
正From August to September,the Chinese Entrepreneur Survey System organized and implemented"Chinese Entrepreneur Questionnaire Follow-up Survey 2014".This marked the 22nd time of national entrepreneur annual follow-up survey organized by this 相似文献
20.
正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field, 相似文献